If we received weak cache consistency data from the server, then those
attributes are up to date, and there is no reason to mark them as
dirty in the attribute cache.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Even if the change attribute is missing, it is still OK to mark the other
attributes as being up to date.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The cache validity attribute is unsigned long, so make sure that
the flags are too.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Starting with NFSv4.1, the server is able to deduce the client id from
the SEQUENCE op which means it can always figure out whether or not
the client is holding a delegation on a file that is being changed.
For that reason, RFC5661 does not require a delegation to be unconditionally
recalled on operations such as SETATTR, RENAME, or REMOVE.

Note that for now, we continue to return READ delegations since that is
still expected by the Linux knfsd server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Ensure that when we do finally delete the file, then we return the
delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Move the delegation recall out of the generic code, and into the NFSv4
specific callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Move the delegation return out of generic code and down into the
NFSv4 specific unlink code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Move the delegation return out of generic code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The 'fmode' argument can take an FMODE_EXEC value, which we want to
filter out before comparing to the delegation type.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Michal Kalderon has found some corner cases around device unload
with active NFS mounts that I didn't have the imagination to test
when xprtrdma device removal was added last year.

- The ULP device removal handler is responsible for deallocating
  the PD. That wasn't clear to me initially, and my own testing
  suggested it was not necessary, but that is incorrect.

- The transport destruction path can no longer assume that there
  is a valid ID.

- When destroying a transport, ensure that ib_free_cq() is not
  invoked on a CQ that was already released.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd0318 ("xprtrdma: Support unplugging an HCA from ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If we have a RECLAIM_COMPLETE with a populated cl_lock_waitq, then
that implies that a reconnect has occurred. Since we can't expect a
CB_NOTIFY_LOCK callback at that point, just wake up the entire queue
so that all the tasks can re-poll for their locks.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The task is expected to sleep for a while here, and it's possible that
a new EXCHANGE_ID has occurred in the interim, and we were assigned a
new clientid. Since this is a per-client list, there isn't a lot of
value in vetting the clientid on the incoming request.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

We may get a notification and lose the race to another client. Ensure
that we wait again for a notification in that case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This information can help track down local misconfiguration issues
as well as network partitions and unresponsive servers.

There are several ways to send a ping, and with transport multi-
plexing, the exact rpc_xprt that is used is sometimes not known by
the upper layer. The rpc_xprt pointer passed to the trace point
call also has to be RCU-safe.

I found a spot inside the client FSM where an rpc_xprt pointer is
always available and safe to use.
Suggested-by: Bill Baker <Bill.Baker@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Introduce a low-overhead mechanism to report information about
latencies of individual RPCs. The goal is to enable user space to
filter the trace record for latency outliers, or build histograms,
etc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: struct rpc_task carries a pointer to a struct rpc_clnt,
and in fact task->tk_client is always what is passed into trace
points that are already passing @task.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If recording xprt->stat.max_slots is moved into xprt_alloc_slot,
then xprt->num_reqs is never manipulated outside
xprt->reserve_lock. There's no longer a need for xprt->num_reqs to
be atomic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Some RPC transports have more overhead in their send_request
callouts than others. For example, for RPC-over-RDMA:

- Marshaling an RPC often has to DMA map the RPC arguments

- Registration methods perform memory registration as part of
  marshaling

To capture just server and network latencies more precisely: when
sending a Call, capture the rq_xtime timestamp _after_ the transport
header has been marshaled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Some RPC transports have more overhead in their reply handlers
than others. For example, for RPC-over-RDMA:

- RPC completion has to wait for memory invalidation, which is
  not a part of the server/network round trip

- Recently a context switch was introduced into the reply handler,
  which further artificially inflates the measure of RPC RTT

To capture just server and network latencies more precisely: when
receiving a reply, compute the RTT as soon as the XID is recognized
rather than at RPC completion time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Since commit 33849792 ("xprtrdma: Detect unreachable NFS/RDMA
servers more reliably"), the xprtrdma transport now has a ->timer
callout. But xprtrdma does not need to compute RTT data, only UDP
needs that. Move the xprt_update_rtt call into the UDP transport
implementation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Refactor: Both rpcrdma_create_req call sites have to allocate the
buffer where the transport header is built, so just move that
allocation into rpcrdma_create_req.

This buffer is a fixed size. There's no needed information available
in call_allocate that is not also available when the transport is
created.

The original purpose for allocating these buffers on demand was to
reduce the possibility that an allocation failure during transport
creation will hork the mount operation during low memory scenarios.
Some relief for this rare possibility is coming up in the next few
patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

With FRWR, the client transport can perform memory registration and
post a Send with just a single ib_post_send.

This reduces contention between the send_request path and the Send
Completion handlers, and reduces the overhead of registering a chunk
that has multiple segments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

RPC-over-RDMA version 1 credit accounting relies on there being a
response message for every RPC Call. This means that RPC procedures
that have no reply will disrupt credit accounting, just in the same
way as a retransmit would (since it is sent because no reply has
arrived). Deal with the "no reply" case the same way.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Create fewer MRs on average. Many workloads don't need as many as
32 MRs, and the transport can now quickly restock the MR free list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Currently, when the MR free list is exhausted during marshaling, the
RPC/RDMA transport places the RPC task on the delayq, which forces a
wait for HZ >> 2 before the marshal and send is retried.

With this change, the transport now places such an RPC task on the
pending queue, and wakes it just as soon as more MRs have been
created. Creating more MRs typically takes less than a millisecond,
and this waking mechanism is less deadlock-prone.

Moreover, the waiting RPC task is holding the transport's write
lock, which blocks the transport from sending RPCs. Therefore faster
recovery from MR exhaustion is desirable.

This is the same mechanism that the TCP transport utilizes when
handling write buffer space exhaustion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: The generic rq_connect_cookie is sufficient to detect RPC
Call retransmission.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: We need to check only that the value does not exceed the
range of the u8 field it's going into.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

With v4.15, on one of my NFS/RDMA clients I measured a nearly
doubling in the latency of small read and write system calls. There
was no change in server round trip time. The extra latency appears
in the whole RPC execution path.

"git bisect" settled on commit ccede759 ("xprtrdma: Spread reply
processing over more CPUs") .

After some experimentation, I found that leaving the WQ bound and
allowing the scheduler to pick the dispatch CPU seems to eliminate
the long latencies, and it does not introduce any new regressions.

The fix is implemented by reverting only the part of
commit ccede759 ("xprtrdma: Spread reply processing over more
CPUs") that dispatches RPC replies specifically on the CPU where the
matching RPC call was made.

Interestingly, saving the CPU number and later queuing reply
processing there was effective _only_ for a NFS READ and WRITE
request. On my NUMA client, in-kernel RPC reply processing for
asynchronous RPCs was dispatched on the same CPU where the RPC call
was made, as expected. However synchronous RPCs seem to get their
reply dispatched on some other CPU than where the call was placed,
every time.

Fixes: ccede759 ("xprtrdma: Spread reply processing over ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull x86 fixes from Thomas Gleixner:
 "A small set of fixes for x86:

   - Add missing instruction suffixes to assembly code so it can be
     compiled by newer GAS versions without warnings.

   - Switch refcount WARN exceptions to UD2 as we did in general

   - Make the reboot on Intel Edison platforms work

   - A small documentation update so text and sample command match"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation, x86, resctrl: Make text and sample command match
  x86/platform/intel-mid: Handle Intel Edison reboot correctly
  x86/asm: Add instruction suffixes to bitops
  x86/entry/64: Add instruction suffix
  x86/refcounts: Switch to UD2 for exceptions

Pull x86/pti fixes from Thomas Gleixner:
 "Three fixes related to melted spectrum:

   - Sync the cpu_entry_area page table to initial_page_table on 32 bit.

     Otherwise suspend/resume fails because resume uses
     initial_page_table and triggers a triple fault when accessing the
     cpu entry area.

   - Zero the SPEC_CTL MRS on XEN before suspend to address a
     shortcoming in the hypervisor.

   - Fix another switch table detection issue in objtool"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
  objtool: Fix another switch table detection issue
  x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes from the timer departement:

   - Add a missing timer wheel clock forward when migrating timers off a
     unplugged CPU to prevent operating on a stale clock base and
     missing timer deadlines.

   - Use the proper shift count to extract data from a register value to
     prevent evaluating unrelated bits

   - Make the error return check in the FSL timer driver work correctly.
     Checking an unsigned variable for less than zero does not really
     work well.

   - Clarify the confusing comments in the ARC timer code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Forward timer base before migrating timers
  clocksource/drivers/arc_timer: Update some comments
  clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
  clocksource/drivers/fsl_ftm_timer: Fix error return checking

Pull irq fixlet from Thomas Gleixner:
 "Just a documentation update for the missing device tree property of
  the R-Car M3N interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support

Pull btrfs fixes from David Sterba:

 - when NR_CPUS is large, a SRCU structure can significantly inflate
   size of the main filesystem structure that would not be possible to
   allocate by kmalloc, so the kvalloc fallback is used

 - improved error handling

 - fix endiannes when printing some filesystem attributes via sysfs,
   this is could happen when a filesystem is moved between different
   endianity hosts

 - send fixes: the NO_HOLE mode should not send a write operation for a
   file hole

 - fix log replay for for special files followed by file hardlinks

 - fix log replay failure after unlink and link combination

 - fix max chunk size calculation for DUP allocation

* tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix log replay failure after unlink and link combination
  Btrfs: fix log replay failure after linking special file and fsync
  Btrfs: send, fix issuing write op when processing hole in no data mode
  btrfs: use proper endianness accessors for super_copy
  btrfs: alloc_chunk: fix DUP stripe size handling
  btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster
  btrfs: handle failure of add_pending_csums
  btrfs: use kvzalloc to allocate btrfs_fs_info

Pull i2c fixes from Wolfram Sang:
 "A driver fix and a documentation fix (which makes dependency handling
  for the next cycle easier)"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: octeon: Prevent error message on bus error
  dt-bindings: at24: sort manufacturers alphabetically

Pull libnvdimm fixes from Dan Williams:
 "A 4.16 regression fix, three fixes for -stable, and a cleanup fix:

   - During the merge window support for the new ACPI NVDIMM Platform
     Capabilities structure disabled support for "deep flush", a
     force-unit- access like mechanism for persistent memory. Restore
     that mechanism.

   - VFIO like RDMA is yet one more memory registration / pinning
     interface that is incompatible with Filesystem-DAX. Disable long
     term pins of Filesystem-DAX mappings via VFIO.

   - The Filesystem-DAX detection to prevent long terms pins mistakenly
     also disabled Device-DAX pins which are not subject to the same
     block- map collision concerns.

   - Similar to the setup path, softlockup warnings can trigger in the
     shutdown path for large persistent memory namespaces. Teach
     for_each_device_pfn() to perform cond_resched() in all cases.

   - Boaz noticed that the might_sleep() in dax_direct_access() is stale
     as of the v4.15 kernel.

  These have received a build success notification from the 0day robot,
  and the longterm pin fixes have appeared in -next. However, I recently
  rebased the tree to remove some other fixes that need to be reworked
  after review feedback.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  memremap: fix softlockup reports at teardown
  libnvdimm: re-enable deep flush for pmem devices via fsync()
  vfio: disable filesystem-dax page pinning
  dax: fix vma_is_fsdax() helper
  dax: ->direct_access does not sleep anymore

Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - suppress sparse warnings about unknown attributes

 - fix typos and stale comments

 - fix build error of arch/sh

 - fix wrong use of ld-option vs cc-ldoption

 - remove redundant GCC_PLUGINS_CFLAGS assignment

 - fix another memory leak of Kconfig

 - fix line number in error messages of Kconfig

 - do not write confusing CONFIG_DEFCONFIG_LIST out to .config

 - add xstrdup() to Kconfig to handle memory shortage errors

 - show also a Debian package name if ncurses is missing

* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  MAINTAINERS: take over Kconfig maintainership
  kconfig: fix line number in recursive inclusion error message
  Coccinelle: memdup: Fix typo in warning messages
  kconfig: Update ncurses package names for menuconfig
  kbuild/kallsyms: trivial typo fix
  kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
  kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
  kconfig: Don't leak choice names during parsing
  sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
  kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
  kconfig: add xstrdup() helper
  kbuild: disable sparse warnings about unknown attributes
  Makefile: Fix lying comment re. silentoldconfig

Pull media fixes from Mauro Carvalho Chehab:

  - some build fixes with randconfigs

  - an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the
    right version during probe (with can happen if the hardware hangs)

  - a potential out of array bounds reference in tvp5150

  - some fixes and improvements in the DVB memory mapped API (added for
    kernel 4.16)

* tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vb2: Makefile: place vb2-trace together with vb2-core
  media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
  media: dvb: update buffer mmaped flags and frame counter
  media: dvb: add continuity error indicators for memory mapped buffers
  media: dmxdev: Fix the logic that enables DMA mmap support
  media: dmxdev: fix error code for invalid ioctls
  media: m88ds3103: don't call a non-initalized function
  media: au0828: add VIDEO_V4L2 dependency
  media: dvb: fix DVB_MMAP dependency
  media: dvb: fix DVB_MMAP symbol name
  media: videobuf2: fix build issues with vb2-trace
  media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part