- 30 Aug, 2015 40 commits
-
-
Ariel Nahum authored
When handling a device internal error, the driver is responsible to drain the completion queue with flush errors. In case a completion queue was assigned to multiple send queues, the driver iterates over the send queues and generates flush errors of inflight wqes. The driver must correctly pass the wc array with an offset as a result of the previous send queue iteration. Not doing so will overwrite previously set completions and return a wrong number of polled completions which includes ones which were not correctly set. Fixes: 35f05dab (IB/mlx4: Reset flow support for IB kernel ULPs) Signed-off-by:
Ariel Nahum <arieln@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Cc: Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Noa Osherovich authored
The mlx4 IB driver implementation for ib_query_ah used a wrong offset (28 instead of 29) when link type is Ethernet. Fixed to use the correct one. Fixes: fa417f7b ('IB/mlx4: Add support for IBoE') Signed-off-by:
Shani Michaeli <shanim@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The pkey mapping for RoCE must remain the default mapping: VFs: virtual index 0 = mapped to real index 0 (0xFFFF) All others indices: mapped to a real pkey index containing an invalid pkey. PF: virtual index i = real index i. Don't allow users to change these mappings using files found in sysfs. Fixes: c1e7e466 ('IB/mlx4: Add iov directory in sysfs under the ib device') Signed-off-by:Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
The mcg "too many pending requests" warning message fills the log when OpenSM is downed. Demote the message from warning level to debug level. Signed-off-by:
-
Jack Morgenstein authored
send_mad_to_wire takes the same spinlock that is taken in the interrupt context. Therefore, it needs irqsave/restore. Fixes: b9c5d6a6 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by:
-
Doug Ledford authored
Signed-off-by: -
Somnath Kotur authored
1.Change query_gid hook to return value from IB/Core GID management APIs. 2.Get rid of all the netdev notifier chain subscription code as well as maintenance of SGID Table in memory. 3.Implement get_netdev hook in driver. Signed-off-by:
Somnath Kotur <somnath.kotur@avagotech.com> Signed-off-by:
Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by:
-
Moni Shoua authored
Manage RoCE gid table with logic in IB/core, which is common to all vendors, and remove the mechanism from the mlx4 IB driver. Since management of the GID cache may lead to index mismatch with the hardware GID table, a translation between indexes is required when modifying a QP or creating an address handle. Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Moni Shoua authored
get_netdev: get the net_device on the physical port of the IB transport port. In port aggregation mode it is required to return the netdev of the active port. modify_gid: note for a change in the RoCE gid cache. Handle this by writing to the harsware GID table. It is possible that indexes in cahce and hardware tables won't match so a translation is required when modifying a QP or creating an address handle. Signed-off-by:
-
Moni Shoua authored
The mlx4 network driver was registered in the context of the 'add' function of the core driver (called when HW should be registered). This makes the netdev event NETDEV_REGISTER to be sent in a context where the answer to get_protocol_dev() callback returns NULL. This may be confusing to listeners of netdev events. This patch is a preparation to the patch that implements the get_netdev() callback in the IB/mlx4 driver. Signed-off-by:
-
Matan Barak authored
Handling bonding and other devices require us to all all GIDs of the net-devices which are upper-devices of the RoCE port related net-device. Active-backup configurations imposes even more challenges as the default GID should only be set on the active devices (this is necessary as otherwise the same MAC could be used for several slaves and thus several slaves will have identical GIDs). Managing these configurations are done by listening to: (a) NETDEV_CHANGEUPPER event (1) if a related net-device is linked, delete all inactive slaves default GIDs and add the upper device GIDs. (2) if a related net-device is unlinked, delete all upper GIDs and add the default GIDs. (b) NETDEV_BONDING_FAILOVER: (1) delete the bond GIDs from inactive slaves (2) delete the inactive slave's default GIDs (3) Add the bond GIDs to the active slave. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
Smatch says that, based on the indenting, we should probably add curly braces here. Fixes: 03db3a2d ('IB/core: Add RoCE GID table management') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Matan Barak authored
RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: -
Jason Gunthorpe authored
This gets rid of the weird in-between state where struct ib_device was allocated but the kobject didn't work. Consequently ib_device_release is now guaranteed to be called in all situations and we needn't duplicate its kfrees on error paths. Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Matan Barak authored
Some consumers of the netdev events API would like to know who is the active slave when a NETDEV_CHANGEUPPER or NETDEV_BONDING_FAILOVER events occur. For example, when managing RoCE GIDs, GIDs based on the bond's ips should only be set on the port which corresponds to active slave netdevice. Signed-off-by:
-
Matan Barak authored
Some consumers of NETDEV_CHANGEUPPER event would like to know which upper device was linked/unlinked and what operation was carried. Add information in the notifier info block for that purpose. Signed-off-by:
-
Matan Barak authored
For loopback purposes, RoCE devices should have a default GID in the port GID table, even when the interface is down. In order to do so, we use the IPv6 link local address which would have been genenrated for the related Ethernet netdevice when it goes up as a default GID. addrconf_ifid_eui48 is used to gernerate this address, export it. Signed-off-by:
-
Sagi Grimberg authored
Fully replaced by a more generic and suitable ib_alloc_mr. Signed-off-by:
-
Mike Marciniszyn authored
Ported from upstream qib commit 68c02e232b8a ("qib: Support ib_alloc_mr verb") Tested-by:Jubin John <jubin.john@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Steve Wise authored
Svcrdma was incorrectly allocating fastreg MRs and page lists using RPCSVC_MAXPAGES, which can exceed the device capabilities. So limit the depth to the minimum of RPCSVC_MAXPAGES and xprt->sc_frmr_pg_list_len. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Use ib_alloc_mr with specific parameters. Change the existing callers. Signed-off-by:
-
Sagi Grimberg authored
This was added in a thought of uniting all mr allocation and deallocation routines but the fact is we have a single deallocation routine already, ib_dereg_mr. And, move mlx5_ib_destroy_mr specific logic into mlx5_ib_dereg_mr (includes only signature stuff for now). And, fixup the only callers (iser/isert) accordingly. Signed-off-by:
-
Haggai Eran authored
When no matching listening ID is found for a given request, the net_dev that was used to find the request isn't released. Fixes: 0b3ca768 ("IB/cma: Use found net_dev for passive connections") Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Haggai Eran authored
Now that there are no ib_cm clients using the compare_data feature for matching IB CM requests' private data, remove the compare_data parameter of ib_cm_listen and remove the code implementing the feature. Signed-off-by:
-
Haggai Eran authored
Use ib_cm_insert_listen to create listening IB CM IDs or share existing ones if needed. When given a request on a specific CM ID, the code now matches the request to the RDMA CM ID based on the request parameters, so it no longer needs to rely on the ib_cm's private data matching capabilities. Signed-off-by:
-
Haggai Eran authored
When receiving a new connection in cma_req_handler, we actually already know the net_dev that is used for the connection's creation. Instead of calling cma_translate_addr to resolve the new connection id's source address, just use the net_dev that was found. Signed-off-by:
-
Haggai Eran authored
Pass incoming request parameters through the relevant IPv4/IPv6 routing tables and make sure the network stack is configured to handle such requests. Signed-off-by:
-
Haggai Eran authored
Instead of relying on a the ib_cm module to check an incoming CM request's private data header, add these checks to the RDMA CM module. This allows a following patch to to clean up the ib_cm interface and remove the code that looks into the private headers. It will also allow supporting namespaces in RDMA CM by making these checks namespace aware later on. Signed-off-by:
-
