- 14 Apr, 2011 3 commits
-
-
Rasesh Mody authored
During a kernel crash, bna control path state machine and firmware do not get a notification and hence are not cleanly shutdown. The registers holding driver/IOC state information are not reset back to valid disabled/parking values. This causes subsequent driver initialization to hang during kdump kernel boot. This patch, during the initialization of first PCI function, resets corresponding register when unclean shutown is detect by reading chip registers. This will make sure that ioc/fw gets clean re-initialization. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
huajun li authored
USB tethering does not work anymore since 2.6.39-rc2, but it's okay in -rc1. The root cause is the new added mask code 'FLAG_POINTTOPOINT' overlaps 'FLAG_MULTI_PACKET' in include/linux/usb/usbnet.h, this causes logic issue in rx_process(). This patch cleans up the overlap. Reported-and-Tested-by: Gottfried Haider <gottfried.haider@gmail.com> Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Apr, 2011 9 commits
-
-
Stanislaw Gruszka authored
priv->tx_power_next is not initialized to max supported power, but instead default value is used, what cause errors like [ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14. [ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22). if maximum tx power read from the eeprom is smaller than default. In consequence card is unable to initialize properly. Fix the problem and cleanup tx power initialization. Reported-and-tested-by: Robin Dong <hao.bigrat@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David S. Miller authored
This reverts commit c191a836. It causes known regressions for programs that expect to be able to use SO_REUSEADDR to shutdown a socket, then successfully rebind another socket to the same ID. Programs such as haproxy and amavisd expect this to work. This should fix kernel bugzilla 32832. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Machines are getting deadlock in four node cluster environment. All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null) 200 GB storage on a GFS2 filesystem. This result in memory fragmentation and driver receives 18 frags for 1448 byte packets. For non tso packet, fw drops the tx request, if it has >14 frags. Fixing it by pulling extra frags. Cc: stable@kernel.org Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anatolij Gustschin authored
Commit 74888760 "dt/net: Eliminate users of of_platform_{,un}register_driver" broke building mscan driver. Fix it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Since we can not update retran path to unconfirmed transports, when we remove a peer, the retran path may not be update if the other transports are all unconfirmed, and we will still using the removed transport as the retran path. This may cause panic if retrasnmit happen. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
commit fbdf501c sctp: Do no select unconfirmed transports for retransmissions Introduced the initial falt. commit d598b166 sctp: Make sure we always return valid retransmit path Solved the problem, but forgot to change the DEBUG statement. Thus it was still possible to dereference a NULL pointer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
NETIF_F_TSO_ECN has no effect when TSO is disabled; this just means that feature state will be accurately reported to user-space. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
The feature flags NETIF_F_TSO and NETIF_F_TSO6 independently enable TSO for IPv4 and IPv6 respectively. However, the test in netdev_fix_features() and its predecessor functions was never updated to check for NETIF_F_TSO6, possibly because it was originally proposed that TSO for IPv6 would be dependent on both feature flags. Now that these feature flags can be changed independently from user-space and we depend on netdev_fix_features() to fix invalid feature combinations, it's important to disable them both if scatter-gather is disabled. Also disable NETIF_F_TSO_ECN so user-space sees all TSO features as disabled. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
- 12 Apr, 2011 14 commits
-
-
Neil Turton authored
Enabling write-combining may also enable read reordering. The BIU is only guaranteed to read from a 128-bit CSR or 64-bit SRAM word when the host reads from its lowest address; otherwise the BIU may use the latched value. Therefore we need to reinstate the read memory barriers after the first read operation for each CSR or SRAM word. Signed-off-by; Ben Hutchings <bhutchings@solarflare.com>
-
David S. Miller authored
It adds -Wall (which the kernel carefully controls already) and of all things -DDEBUG (which should be set by other means if desired, please we have dynamic-debug these days). Kill this noise. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dave Jones authored
5b40964e ("irda: Remove BKL instances from af_irda.c") introduced a path where we have a locking unbalance. If we pass invalid flags, we unlock a socket we never locked, resulting in this... ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- trinity/20101 is trying to release lock (sk_lock-AF_IRDA) at: [<ffffffffa057f001>] irda_sendmsg+0x207/0x21d [irda] but there are no more locks to release! other info that might help us debug this: no locks held by trinity/20101. stack backtrace: Pid: 20101, comm: trinity Not tainted 2.6.39-rc3+ #3 Call Trace: [<ffffffffa057f001>] ? irda_sendmsg+0x207/0x21d [irda] [<ffffffff81085041>] print_unlock_inbalance_bug+0xc7/0xd2 [<ffffffffa057f001>] ? irda_sendmsg+0x207/0x21d [irda] [<ffffffff81086aca>] lock_release+0xcf/0x18e [<ffffffff813ed190>] release_sock+0x2d/0x155 [<ffffffffa057f001>] irda_sendmsg+0x207/0x21d [irda] [<ffffffff813e9f8c>] __sock_sendmsg+0x69/0x75 [<ffffffff813ea105>] sock_sendmsg+0xa1/0xb6 [<ffffffff81100ca3>] ? might_fault+0x5c/0xac [<ffffffff81086b7c>] ? lock_release+0x181/0x18e [<ffffffff81100cec>] ? might_fault+0xa5/0xac [<ffffffff81100ca3>] ? might_fault+0x5c/0xac [<ffffffff81133b94>] ? fcheck_files+0xb9/0xf0 [<ffffffff813f387a>] ? copy_from_user+0x2f/0x31 [<ffffffff813f3b70>] ? verify_iovec+0x52/0xa6 [<ffffffff813eb4e3>] sys_sendmsg+0x23a/0x2b8 [<ffffffff81086b7c>] ? lock_release+0x181/0x18e [<ffffffff810773c6>] ? up_read+0x28/0x2c [<ffffffff814bec3d>] ? do_page_fault+0x360/0x3b4 [<ffffffff81087043>] ? trace_hardirqs_on_caller+0x10b/0x12f [<ffffffff810458aa>] ? finish_task_switch+0xb2/0xe3 [<ffffffff8104583e>] ? finish_task_switch+0x46/0xe3 [<ffffffff8108364a>] ? trace_hardirqs_off_caller+0x33/0x90 [<ffffffff814bbaf9>] ? retint_swapgs+0x13/0x1b [<ffffffff81087043>] ? trace_hardirqs_on_caller+0x10b/0x12f [<ffffffff810a9dd3>] ? audit_syscall_entry+0x11c/0x148 [<ffffffff8125609e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff814c22c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Otavio Salvador authored
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Otavio Salvador authored
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
When a skb is delivered to a registered callback, cn_call_callback() incorrectly returns -ENODEV after freeing the skb, causing cn_rx_skb() to free the skb a second time. Reported-by: Eric B Munson <emunson@mgebm.net> Signed-off-by: Patrick McHardy <kaber@trash.net> Tested-by: Eric B Munson <emunson@mgebm.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joakim Tjernlund authored
controlling igmp_max_membership is useful even when IP_MULTICAST is off. Quagga(an OSPF deamon) uses multicast addresses for all interfaces using a single socket and hits igmp_max_membership limit when there are 20 interfaces or more. Always export sysctl igmp_max_memberships in proc, just like igmp_max_msf Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
On 64bit arches, we use 752 bytes of stack when cleanup_once() is called from inet_getpeer(). Lets share the avl stack to save ~376 bytes. Before patch : # objdump -d net/ipv4/inetpeer.o | scripts/checkstack.pl 0x000006c3 unlink_from_pool [inetpeer.o]: 376 0x00000721 unlink_from_pool [inetpeer.o]: 376 0x00000cb1 inet_getpeer [inetpeer.o]: 376 0x00000e6d inet_getpeer [inetpeer.o]: 376 0x0004 inet_initpeers [inetpeer.o]: 112 # size net/ipv4/inetpeer.o text data bss dec hex filename 5320 432 21 5773 168d net/ipv4/inetpeer.o After patch : objdump -d net/ipv4/inetpeer.o | scripts/checkstack.pl 0x00000c11 inet_getpeer [inetpeer.o]: 376 0x00000dcd inet_getpeer [inetpeer.o]: 376 0x00000ab9 peer_check_expire [inetpeer.o]: 328 0x00000b7f peer_check_expire [inetpeer.o]: 328 0x0004 inet_initpeers [inetpeer.o]: 112 # size net/ipv4/inetpeer.o text data bss dec hex filename 5163 432 21 5616 15f0 net/ipv4/inetpeer.o Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Scot Doyle <lkml@scotdoyle.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Reviewed-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sujith Manoharan authored
Pass the correct module name and device interface so that ethtool can display the proper values. The firmware version will be fixed later on when the FW can actually report a version. :) Reported-by: Richard Farina <sidhayn@gmail.com> Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Tested-by: Richard Farina <sidhayn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
During PHY errors, the MAC can sometimes fail to enter an idle state on older hardware (before AR9380) after an rx stop has been requested. This typically shows up in the kernel log with messages like these: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]() Call Trace: [<8023f0e8>] dump_stack+0x8/0x34 [<80075050>] warn_slowpath_common+0x78/0xa4 [<80075094>] warn_slowpath_null+0x18/0x24 [<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k] [<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k] [<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k] When this happens, the state that the MAC enters is easy to identify and does not result in bogus DMA traffic, however to ensure a working state after a channel change, the hardware should still be reset. This patch adds detection for this specific MAC state, after which the above warnings completely disappear in my tests. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Eric Dumazet authored
Commit 462fb2af (bridge : Sanitize skb before it enters the IP stack), missed one IPCB init before calling ip_options_compile() Thanks to Scot Doyle for his tests and bug reports. Reported-by: Scot Doyle <lkml@scotdoyle.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Acked-by: Bandan Das <bandan.das@stratus.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Cc: Jan Lübbe <jluebbe@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
During self-tests we use efx_process_channel_now() to handle completion and other events synchronously. This disables interrupts and NAPI processing for the channel in question, but it may still be interrupted by another channel. A single socket may receive packets from multiple net devices or even multiple channels of the same net device, so this can result in deadlock on a socket lock. Receiving packets in process context will also result in incorrect classification by the network cgroup classifier. Therefore, we must only use efx_process_channel_now() in the offline loopback tests (which never deliver packets up the stack) and not for the online interrupt and event tests. For the interrupt test, there is no reason to process events. We only care that an interrupt is raised. For the event test, we want to know whether events have been received, and there may be many events ahead of the one we inject. Therefore remove efx_channel::magic_count and instead test whether efx_channel::eventq_read_ptr advances. This is currently an event queue index and might wrap around to exactly the same value, resulting in a false negative. Therefore move the masking to efx_event() and efx_nic_eventq_read_ack() so that it cannot wrap within the time of the test. The event test also tries to diagnose failures by checking whether an event was delivered without causing an interrupt. Add and use a helper function that only does this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
Neil Turton authored
If the TX queues are running during loopback self tests, host traffic gets looped back which causes the test to fail. Avoid restarting the TX queues after the port reset so that any packets sent by the host get held back until after the tests have completed. [bwh: Also wake all TX queues at the end of self-tests.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
-
David S. Miller authored
Fixes bugzilla #32872 The LLC stack pretends to support non-linear skbs but there is a direct use of skb_tail_pointer() in llc_fixup_skb(). Use pskb_may_pull() to see if data_size bytes remain and can be accessed linearly in the packet, instead of direct pointer checks. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Apr, 2011 14 commits
-
-
Sjur Brændeland authored
In the CAIF Payload message the Packet Type indication must be set to UNCLASSIFIED in order to allow packet prioritization in the modem's network stack. Otherwise TCP-Ack is not prioritized in the modems transmit queue. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sjur Brændeland authored
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
amit salecha authored
Machines are getting deadlock in four node cluster environment. All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null) 200 GB storage on a GFS2 filesystem. This result in memory fragmentation and driver receives 18 frags for 1448 byte packets. For non tso packet, fw drops the tx request, if it has >14 frags. Fixing it by pulling extra frags. Cc: stable@kernel.org Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
replace relpy with reply. replace premanent with permanent. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
replace tranmitted with transmitted. replace tranmitting with transmitting. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
Now, alb_bond_info uses rx_ntt,rlb_update_delay_counter and rlb_update_retry_counter to decide when to call rlb_update_rx_clients(). Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
Now bonding-alb uses delayed_work instead of timer_list. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
It is unnecessary to set save_load to 1 here, as the tx_hashtbl is just kzalloced. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
On some old MAC chips without COE sometime the Transmit Underflow error is issued. The driver aborted all the transmission process and initialized it from scratch. This breaks the network activity as raised by Nachiketa on a SPEAr board. The patch is to fix this rare underflow event. The driver will only clear the interrupt and the Tx DMA will go out the Suspend state as soon as the descriptor is fetched again. The driver will continue to bump-up the DMA FIFO threshold that, indeed, helped somebody to prevent this kind of error in the past as well. Reported-by: Nachiketa Prachanda <nprachanda@ncomputing.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch reviews the open function and fixes some errors when exit with an error state. It also moves the request_irq after core is initialized when interrupts are properly masked. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch fixes a compilation error when build the dwmac_lib with the DEBUG option enabled. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Otherwise, IWLWIFI_LEGACY has to be selected independently before the drivers are made available. Reported-by: Dave Airlie <airlied@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Linus Torvalds authored
In commit 13583b16 ("PCI: refactor io size calculation code") Ram had a thinko in the refactorization of the code: the end result used the variable 'align' for the bus alignment, but the original code used 'min_align'. Since then, another use of that 'align' variable got introduced by commit c8adf9a3 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") Fix both of those uses to use 'min_align' as they should. Daniel Hellstrom <daniel@gaisler.com> Acked-by: Ram Pai <linuxram@us.ibm.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-