Here is the new radeonfb. It doesn't remove the old one, just in case,
though CONFIG_FB_RADEON now builds the new one.

The new driver supports recent cards, has better monitor detection,
including DDC2, fixes a couple of constants in the old driver, and a lot
more.

I had to add an empty fb_set_suspend() function to fbmem.c (the real
implementation is in James tree and will be here soon).  That means that
Power Management on Apple laptops isn't completely right yet until the
core fbdev fixes get in, but it's good enough for now.

rivafb is part of the g5 defconfig, but will cause a build error
on ppc64 due to a missing #include, here is the fix.

into home.osdl.org:/home/torvalds/v2.5/linux

The secondary MPIC is now supported on ppc64, so the driver can
use interrupts all the time now

This syscall is used by XFree to retreive the IO base of the
bus where the video card is plugged. This is only implemented
for compatibility with existing XFree86, I don't plan to do
a 64 bits version, XFree shall be fixed to use proper PCI access
methods

This is only used with the "sccdbg" kernel command line option, as
you need a special adapter (www.geethree.com) to get access to the
serial port on those machines.

This involves moving the final fixup to a function pointer in machdep,
turning all the PCI DMA routines into function pointers in a separate
structure and a bit of renaming work. The PowerMac currently use
"direct" PCI DMA bypassing the iommu. The driver for the IOMMU will
come later, allowing us to lift the limitation to 2Gb of RAM

This involves making the actual read/write routines be indirect
through ppc_md, and adding the various nvram partition types
used on a PowerMac.

Also move some of the init cruft into separate function to make
things slightly more readable. We sill need to significantly
cleanup that file, but that will come later...

Properly export the OF device-tree accessors to modules

Apple's OF boots us with translation enabled. Also move the
copy_and_flush of the CPU holding loop to prom.c as it mustn't
be called on platforms that don't boot in real mode (that space
isn't always mapped)

Source WATCHDOG config info from drivers/char/watchdog/Kconfig
for m68k, sparc and sparc64 architectures

Add the Berkshire Products PCI-PC Watchdog driver

Apparently we ported the indydog code to the 2.5/2.6 kernel series,
but we forgot to put it in the kernel configuration file + the Makefile

Cleanup/Restructuring of drivers/char/watchdog/Kconfig

Version 0.06 of the intel i8xx TCO driver:
* change i810_margin to heartbeat (in seconds)
* use module_param
* added notify system support
* renamed module to i8xx_tco

Added notifier support
Moved start and stop code to their own subroutines
Extended ioctl support
Add MODULE_* info

small cleanup

Update MODULE_* information