- 21 Jun, 2019 17 commits
-
-
Nishka Dasgupta authored
Remove unused function r8712_setrfintfs_cmd. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nishka Dasgupta authored
Remove unused function r8712_setfwra_cmd. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function r8712_setfwdig_cmd(). Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function r8712_setbasicrate_cmd. Signed-off-by:
-
Sergio Paracuellos authored
This driver has dependencies on mt7621-gpio and mt7621-pci-phy which are init in later stages. Hence, when this driver is probed it is always returning 'EPROBE_DEFER' and being initialized afterwards. Use function 'module_init' to just initialize later. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
The clock which has been used here is not about the phy but the pcie port. It has been properly handled into host pcie driver code. Hence, remove it from here which is the correct thing to do. Signed-off-by:
-
Sergio Paracuellos authored
Add missing call to 'phy_exit' function if the phy_power_on call fails. With this call added the error path is properly handled. Fixes: 07420a02 ("staging: mt7621-pci: use gpio perst instead of builtin behaviour") Signed-off-by:
-
Sergio Paracuellos authored
When there is no pcie link detected we have to properly disable the port pcie clock. Signed-off-by:
-
Adham Abozaeid authored
Add passive scan support to the driver by passing the scan type to the HW and configure the HW scan time if configured by the cfg80211. Signed-off-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_enqueue_cmd_ex from u8 to void as its return value is never stored, checked or otherwise used. Modify return statements accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Remove function _r8712_wdg_timeout_handler as all it does is call r8712_wdg_wk_cmd. Modify call site of _r8712_wdg_timeout_handler to call r8712_wdg_wk_cmd instead. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_wdg_wk_cmd from u8 to void as its return value is never stored, checked or otherwise used. Modify its return statements accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_disconnectCtrlEx_cmd from u8 to void as its return value is never stored, checked or otherwise used. Modify its return statements accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of the function r8712_addbareq_cmd from u8 to void as its return value is not stored, checked or otherwise used. Also modify its return statements accordingly. Signed-off-by:
-
YueHaibing authored
when CRYPTO is m and KS7010 is y, building fails: drivers/staging/ks7010/ks_hostif.o: In function `michael_mic.constprop.13': ks_hostif.c:(.text+0x560): undefined reference to `crypto_alloc_shash' ks_hostif.c:(.text+0x580): undefined reference to `crypto_shash_setkey' ks_hostif.c:(.text+0x5e0): undefined reference to `crypto_destroy_tfm' ks_hostif.c:(.text+0x614): undefined reference to `crypto_shash_update' ks_hostif.c:(.text+0x62c): undefined reference to `crypto_shash_update' ks_hostif.c:(.text+0x648): undefined reference to `crypto_shash_finup' Add CRYPTO and CRYPTO_HASH dependencies to fix this. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 8b523f20 ("staging: ks7010: removed custom Michael MIC implementation.") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
-
Nishka Dasgupta authored
Delete file odm_AntDiv.c and corresponding header file odm_AntDiv.h as its functions and definitions are not used anywhere. Remove reference to odm_AntDiv.h. Signed-off-by:
-
- 20 Jun, 2019 23 commits
-
-
Nishka Dasgupta authored
Change return type of function r8712_setMacAddr_cmd() to void as its return value is never stored, checked, or otherwise used. Modify its return statements accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_setstakey_cmd() to void as its return value is never stored, checked, or otherwise used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_setopmode_cmd() from u8 to void as its return value is never stored or checked or otherwise used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_disassoc_cmd from u8 to void as its return value is never stored, checked or otherwise used. Modify its return statements accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of function r8712_set_chplan_cmd from u8 to void as its return value is never stored, checked or otherwise used. Change the return statements accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change the return types of r8712_enqueue_cmd to void as the return value of r8712_enqueue_cmd is never stored, checked, or otherwise used. Also change the return type of _enqueue_cmd to void as it is only called by r8712_enqueue_cmd which does not do anything with the return value except return it itself. Modify return statements in both functions accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of function r8712_joinbss_cmd from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Change return type from u8 to int to accommodate return of -ENOMEM. Similarly, change the return values (_SUCCESS to 0 and _FAIL to -ENOMEM or -EINVAL) and type (sint to int) of the call site of r8712_joinbss_cmd, r8712_select_and_join_from_scan, as one of the branches of r8712_select_and_join_from_scan directly returns the return value of r8712_joinbss_cmd. Modify the call sites of r8712_select_and_join_from_scan to check for 0 instead of _SUCCESS. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove the check for whether the value of variable psecnetwork is NULL as psecnetwork is a field of a field of a non-NULL pointer, and therefore cannot be NULL itself. Signed-off-by:
-
Nishka Dasgupta authored
Remove leading 'p' from the name of the pointer variable padapter. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove leading p from the names of the following pointer variables: - padapter - pmlmepriv - psec_priv. Issue found with Coccinelle. Signed-off-by:
-
Sergio Paracuellos authored
Both driver and device tree have been updated to use GPIO perst. Update bindings documentation also. Signed-off-by:
-
Sergio Paracuellos authored
Driver has been changed to use perts gpio reset instead of perst builtin behaviour. Update device tree accordly. Signed-off-by:
-
Sergio Paracuellos authored
Some boards seems to ignore the PERST builtin behaviour to properly perform a pcie line reset. Use gpio PERST behaviour instead which seems to be more common. Fixes: bd1a05bd ("staging: mt7621-pci: use PERST_N instead of gpio control") Signed-off-by:
-
Sergio Paracuellos authored
There are two messages in driver code which are not correct. Fix both of them to clarify boot runs. Signed-off-by:
-
Michael Straube authored
Remove unused and/or commented code from rtw_wlan_util.c. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Remove function soft_reset_sd_card, as all it does is call reset_sd. Modify call sites of the former to call the latter instead. Issue found with Coccinelle. Signed-off-by:
-
Shobhit Kukreti authored
Resolve indentation errors which were caused by a mix of space and tabs for indentation. Previous patch to fix if-else brace styles revealed the indentation error Signed-off-by:
Shobhit Kukreti <shobhitkukreti@gmail.com> Signed-off-by:
-
Shobhit Kukreti authored
Cleaned up the code to resolve the checkpatch error else should follow close brace '}' from the following files: mlme_linux.c recv_linux.c sdio_intf.c Signed-off-by:
-
Shobhit Kukreti authored
staging: rtl8723bs: Resolve checkpatch error "that open brace { should be on the previous line" in the rtl8723 driver Cleaned up the code from the following files to get rid of check patch error "that open brace { should be on the previous line" drivers/staging/rtl8723bs/os_dep/mlme_linux.c drivers/staging/rtl8723bs/os_dep/recv_linux.c drivers/staging/rtl8723bs/os_dep/rtw_proc.c drivers/staging/rtl8723bs/os_dep/sdio_intf.c drivers/staging/rtl8723bs/os_dep/sdio_ops_linux.c Signed-off-by: -
Hariprasad Kelam authored
Remove pHalData variable as it is set but unused in function. Remove pU1Tmp and replace this with pu8 Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
The break statement is indented one level too deep, fix this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hariprasad Kelam authored
this patch fixes below issue reported by checkpatch.pl CHECK: Lines should not end with a '(' CHECK: Lines should not end with a '(' Signed-off-by: -
Hariprasad Kelam authored
This patch is a cleanup which replaces rtw_malloc(wep_total_len) with kzalloc() and removes the memset(). The rtw_malloc() does GFP_ATOMIC allocations when in_atomic() is true. But as the comments for in_atomic() describe, the in_atomic() check should not be used in driver code. The in_atomic() check is not accurate when preempt is disabled. In this code we are not in IRQ context and we are not holding any spin_locks so GFP_KERNEL is safe. Signed-off-by:
-
