- 12 Jul, 2012 11 commits
-
-
Laxman Dewangan authored
To provide the late suspend and early resume for i2c driver, convert the suspend/resume as suspend-> suspend_noirq resume -> resume_noirq Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> [wsa: fixed up to match previous pm_ops change] Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de>
-
Rafael J. Wysocki authored
Make the Tegra I2C controller driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct platform_driver. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
-
Rafael J. Wysocki authored
Make the ST-Ericsson U300 I2C controller driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct platform_driver. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rafael J. Wysocki authored
Make the PKUnity-v3 SoC I2C controller driver define its suspend callback through a struct dev_pm_ops object rather than by using a legacy PM hook in struct platform_driver. The empty resume callback is not necessary, so remove it. Signed-off-by:
Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by:
-
Rafael J. Wysocki authored
Make the PNX I2C controller driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct platform_driver. Signed-off-by:
-
Rafael J. Wysocki authored
Make the OpenCores I2C controller driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct platform_driver. Signed-off-by:
-
Rafael J. Wysocki authored
Make the Blackfin On-Chip Two Wire Interface driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct platform_driver. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Rafael J. Wysocki authored
Make the AT91 Two-Wire Interface driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct platform_driver. Signed-off-by:
-
Laxman Dewangan authored
In place of defining match_table for non-DT based as NULL, use of_match_ptr() for initialzing the of_match_table. Signed-off-by:
-
Laxman Dewangan authored
Use clk_disable_unprepare() inplace of clk_disable(). This was missed as part of moving clock enable/disable to prepare/unprepare for using the common clock framework. Signed-off-by:
-
Laxman Dewangan authored
Remove unused member variable "iomem" of the i2c device structure. This variable becomes unused when converted all allocation to devm_* in following change: i2c: tegra: make all resource allocation through devm_* Signed-off-by:
-
- 10 Jul, 2012 1 commit
-
-
Wolfram Sang authored
sparse found this assignment of u32 to an int. Fix it: drivers/i2c/busses/i2c-imx.c:540:56: warning: incorrect type in argument 3 (different signedness) and also fix the type in platform_data. All current users use values which fit into the old and new type, so it is a safe change. Signed-off-by:
Wolfram Sang <wolfram@the-dreams.de> Reviewed-by:
Richard Zhao <richard.zhao@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de>
-
- 09 Jul, 2012 7 commits
-
-
Fabio Estevam authored
With the new i.mx clock framework the i2c clock is registered as: clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0") So we do not need to pass "i2c_clk" string and can use NULL instead. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
-
Linus Walleij authored
Make sure we prepare/unprepare the clock for the ST U300 I2C driver as is required by the clk API especially if you use common clock. Signed-off-by:
-
Marc Kleine-Budde authored
This patch mutes the false positive compiler warning: drivers/i2c/busses/i2c-mxs.c: In function 'mxs_i2c_xfer_msg': drivers/i2c/busses/i2c-mxs.c:206:8: warning: 'data' may be used uninitialized in this function [-Wuninitialized] drivers/i2c/busses/i2c-mxs.c:196:6: note: 'data' was declared here Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Virupax Sadashivpetimath authored
Signed-off-by:
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by:
Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Acked-by:
-
Alessandro Rubini authored
The gateware device has been used outside of the Nomadik world, using the pci-amba bridge driver, so loosen the dependencies. Signed-off-by:
Alessandro Rubini <rubini@gnudd.com> Acked-by:
Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Tested-by:
-
Alessandro Rubini authored
The i2c-nomadik gateware is really a PrimeCell APB device. By hosting the driver under the amba bus we can access it more easily, for example using the generic pci-amba driver. The patch also fixes the mach-ux500 users, so they register an amba device instead than a platform device. Signed-off-by:
-
Alessandro Rubini authored
The header and driver are only used by arm/mach-u8500 (and potentially arm/mach-nomadik), but the STA2X11 I/O Hub exports on PCIe a number of devices, including i2c-nomadik. This patch allows compilation of the driver under x86. Signed-off-by:
-
- 08 Jul, 2012 17 commits
-
-
Richard Zhao authored
- convert to use devm_request_and_ioremap, devm_kzalloc, devm_clk_get, devm_request_irq. - clean up unused variables. Signed-off-by:
Shubhrajyoti D <Shubhrajyoti@ti.com> Signed-off-by:
-
Laxman Dewangan authored
Use the devm_* for the memory region allocation, interrupt request, clock handler request. By doing this, it does not require to explicitly free it and hence saving some code. Signed-off-by:
-
Laxman Dewangan authored
Adding support for functionality I2C_M_NOSTART. When multiple message transfer request made through i2c and if any message is flagged with I2C_M_NOSTART then it will not send the start/repeat-start and address of that message i.e. sends data directly. Signed-off-by:
-
Laxman Dewangan authored
The Tegra i2c driver supports the I2C_M_IGNORE_NAK and hence returning I2C_FUNC_PROTOCOL_MANGLING as supported functionality. Signed-off-by:
-
Laxman Dewangan authored
The Tegra PPSB (an peripheral bus) queues writes transactions. In order to guarantee that writes have completed before a certain time, a read transaction to a register on the same bus must be executed. This is necessary in situations such as when clearing an interrupt status or enable, so that when returning from an interrupt handler, the HW has already de-asserted its interrupt status output, which will avoid spurious interrupts. Signed-off-by:
-
Neil Brown authored
On a board with OMAP3 processor and TWL4030 Power management, we need to talk to the TWL4030 during late suspend but cannot because the I2C interrupt is disabled (as late suspend disables interrupt). e.g. I get messages like: [ 62.161102] musb-omap2430 musb-omap2430: LATE power domain suspend [ 63.167205] omap_i2c omap_i2c.1: controller timed out [ 63.183044] twl: i2c_read failed to transfer all messages [ 64.182861] omap_i2c omap_i2c.1: controller timed out [ 64.198455] twl: i2c_write failed to transfer all messages [ 65.198455] omap_i2c omap_i2c.1: controller timed out [ 65.203765] twl: i2c_write failed to transfer all messages The stack shows omap2430_runtime_suspend calling twl4030_set_suspend which tries to power-down the USB PHY (twl4030_phy_suspend -> twl4030_phy_power -> __twl4030_phy_power which as a nice WARN_ON that helps). Then we get the same in resume: [ 69.603912] musb-omap2430 musb-omap2430: EARLY power domain resume [ 70.610473] omap_i2c omap_i2c.1: controller timed out [ 70.626129] twl: i2c_write failed to transfer all messages etc. So don't disable interrupts for I2C. Acked-by:
Kevin Hilman <khilman@ti.com> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Shubhrajyoti D authored
The section number in the recent errata document has changed. Rename the erratum 1p153 to the unique id i462 instead, so that it is easier to reference. Also change the function name and comments to reflect the same. Cc: Jon Hunter <jon-hunter@ti.com> Reviewed-by:
-
Shubhrajyoti D authored
Currently in the 1.153 errata handling, while waiting for transmitter underflow, if NACK is got the XUDF(Transmit underflow) flag is also set. Fix this by setting the XUDF(Transmit underflow) flag after wait for the condition is over. Cc: Alexander Shishkin <virtuoso@slind.org> Acked-by:
Moiz Sonasath <m-sonasath@ti.com> Reviewed-by:
-
Tasslehoff Kjappfot authored
i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again. Prevent the overwrite of the errata flags.Move the errata handling to a unified place in probe to prevent such errors. Reviewed-by:
Tasslehoff Kjappfot <tasskjapp@gmail.com> Signed-off-by:
-
Shubhrajyoti D authored
If PM runtime get_sync fails return with the error so that no further reads/writes goes through the interface. This will avoid possible abort. Add a error message in case of failure with the cause of the failure. Reviewed-by:
-
Shubhrajyoti D authored
In omap_i2c_remove we are accessing the I2C_CON register without enabling the clocks. Fix the same by ensure device is accessible by calling pm_runtime_get_sync before accessing the registers and calling pm_runtime_put after accessing. This fixes the following crash. [ 154.723022] ------------[ cut here ]------------ [ 154.725677] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:112 l3_interrupt_handler+0x1b4/0x1c4() [ 154.725677] L3 custom error: MASTER:MPU TARGET:L4 PER2 [ 154.742614] Modules linked in: i2c_omap(-) [ 154.746948] Backtrace: [ 154.746948] [<c0013078>] (dump_backtrace+0x0/0x110) from [<c026c158>] (dump_stack+0x18/0x1c) [ 154.752716] r6:00000070 r5:c002c43c r4:df9b9e98 r3:df9b8000 [ 154.764465] [<c026c140>] (dump_stack+0x0/0x1c) from [<c0041a2c>] (warn_slowpath_common+0x5c/0x6c) [ 154.768341] [<c00419d0>] (warn_slowpath_common+0x0/0x6c) from [<c0041ae0>] (warn_slowpath_fmt+0x38/0x40) [ 154.776153] r8:00000180 r7:c0361594 r6:c0379b48 r5:00080003 r4:e0838b00 [ 154.790771] r3:00000009 [ 154.791778] [<c0041aa8>] (warn_slowpath_fmt+0x0/0x40) from [<c002c43c>] (l3_interrupt_handler+0x1b4/0x1c4) [ 154.803710] r3:c0361598 r2:c02ef74c [ 154.807403] [<c002c288>] (l3_interrupt_handler+0x0/0x1c4) from [<c0085f44>] (handle_irq_event_percpu+0x58/0 [ 154.818237] r8:0000002a r7:00000000 r6:00000000 r5:df808054 r4:df8893c0 [ 154.825378] [<c0085eec>] (handle_irq_event_percpu+0x0/0x188) from [<c00860b8>] (handle_irq_event+0x44/0x64) [ 154.835662] [<c0086074>] (handle_irq_event+0x0/0x64) from [<c0088ec0>] (handle_fasteoi_irq+0xa4/0x10c) [ 154.845458] r6:0000002a r5:df808054 r4:df808000 r3:c034a150 [ 154.846466] [<c0088e1c>] (handle_fasteoi_irq+0x0/0x10c) from [<c0085ed0>] (generic_handle_irq+0x30/0x38) [ 154.854278] r5:c034aa48 r4:0000002a [ 154.862091] [<c0085ea0>] (generic_handle_irq+0x0/0x38) from [<c000fd38>] (handle_IRQ+0x60/0xc0) [ 154.874450] r4:c034ea70 r3:000001f8 [ 154.878234] [<c000fcd8>] (handle_IRQ+0x0/0xc0) from [<c0008478>] (gic_handle_irq+0x20/0x5c) [ 154.887023] r7:ffffff40 r6:df9b9fb0 r5:c034e2b4 r4:0000001a [ 154.887054] [<c0008458>] (gic_handle_irq+0x0/0x5c) from [<c000ea80>] (__irq_usr+0x40/0x60) [ 154.901153] Exception stack(0xdf9b9fb0 to 0xdf9b9ff8) [ 154.907104] 9fa0: beaf1f04 4006be00 0000000f 0000000c [ 154.915710] 9fc0: 4006c000 00000000 00008034 ffffff40 00000007 00000000 00000000 0007b8d7 [ 154.916778] 9fe0: 00000000 beaf1b68 0000d23c 4005baf0 80000010 ffffffff [ 154.931335] r6:ffffffff r5:80000010 r4:4005baf0 r3:beaf1f04 [ 154.937316] ---[ end trace 1b75b31a2719ed21 ]-- Cc: Rajendra Nayak <rnayak@ti.com> Cc: Linux PM list <linux-pm@vger.kernel.org> Reviewed-by: -
Shubhrajyoti D authored
By definition, wait_for_completion_timeout() returns an unsigned value and therefore, it is not necessary to check if the return value is less than zero as this is not possible. This is based on a patch from Jon Hunter <jon-hunter@ti.com> Changes from his patch - Declare a long as the wait_for_completion_timeout returns long. Original patch is http://git.omapzoom.org/?p=kernel/omap.git;a=commitdiff;h=ea02cece7b0000bc736e60c4188a11aaa74bc6e6Reviewed-by:
Jon Hunter <jon-hunter@ti.com> Signed-off-by:
-
Shubhrajyoti D authored
Currently in probe pm_runtime_put(dev->dev); ... /* i2c device drivers may be active on return from add_adapter() */ adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); if (r) { dev_err(dev->dev, "failure adding adapter\n"); goto err_free_irq; } ... return 0; err_free_irq: free_irq(dev->irq, dev); err_unuse_clocks: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); pm_runtime_put(dev->dev); This may access the i2c registers without the clocks in the error cases. Fix the same by moving the pm_runtime_put after the error check. Reviewed-by: -
Shubhrajyoti D authored
On OMAP4 we were writing 1 to IRQENABLE_CLR which cleared only the arbitration lost interrupt. The patch intends to fix the same by writing 0 to the IE register clearing all interrupts. This is based on the work done by Vikram Pandita <vikram.pandita@ti.com>. The changes from the original patch ... - Does not use the IRQENABLE_CLR register to clear as it is not mentioned to be legacy register IRQENABLE_CLR helps in atomically setting/clearing specific interrupts, instead use the OMAP_I2C_IE_REG as we are clearing all interrupts. Cc: Vikram Pandita <vikram.pandita@ti.com> Reviewed-by:
-
Shubhrajyoti D authored
Currently the i2c driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match.Fix the same by calling pm_runtime_disable in the error and the remove path. Cc: Rajendra Nayak <rnayak@ti.com> Acked-by:
-
Shubhrajyoti D authored
The functions omap_i2c_unidle/idle are called from omap_i2c_runtime_resume and omap_i2c_runtime_suspend which is compiled for CONFIG_PM_RUNTIME. This patch removes the omap_i2c_unidle/idle functions and folds them into the runtime callbacks. This fixes the below warn when CONFIG_PM_RUNTIME is not defined CC arch/arm/mach-omap2/board-ti8168evm.o drivers/i2c/busses/i2c-omap.c:272: warning: 'omap_i2c_unidle' defined but not used drivers/i2c/busses/i2c-omap.c:293: warning: 'omap_i2c_idle' defined but not used CC net/ipv4/ip_forward.o Reviewed-by:
-
Wolfram Sang authored
gpio-i2c describes an I2C controller (using gpios for data and clock), so it must be described in i2c, not gpio. Signed-off-by:
Rob Herring <rob.herring@calxeda.com>
-
- 30 Jun, 2012 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
Randy Dunlap authored
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc warning. This struct member was removed in commit 87568264 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by:
-
