- 15 Sep, 2014 2 commits
-
-
Alexander Y. Fomichev authored
__netdev_adjacent_dev_insert may add adjust device of different net namespace, without proper check it leads to emergence of broken sysfs links from/to devices in another namespace. Fix: rewrite netdev_adjacent_is_neigh_list macro as a function, move net_eq check into netdev_adjacent_is_neigh_list. (thanks David) related to: 4c75431aSigned-off-by:Alexander Fomichev <git.user@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mike Looijmans authored
The KSZ9031 appears to suffer from the same hardware bug as described for the KSZ9021 in commit 32fcafbc ("net/phy: micrel: Disable asymmetric pause for KSZ9021") you have to unplug the cable and plug it back to get it to work. Remove the SUPPORTED_Asym_Pause flag for the KSZ9031 to fix this. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
-
- 13 Sep, 2014 8 commits
-
-
David S. Miller authored
Vladislav Yasevich says: ==================== bridge: Two small fixes to vlan filtering code. This series corrects 2 small issues that I've ran across recently while doing more work with vlan filtering changes. ==================== Signed-off-by: -
Vlad Yasevich authored
Currently, it is possible to modify the vlan filter configuration to add pvid or untagged support. For example: bridge vlan add vid 10 dev eth0 bridge vlan add vid 10 dev eth0 untagged pvid The second statement will modify vlan 10 to include untagged and pvid configuration. However, it is currently impossible to go backwards bridge vlan add vid 10 dev eth0 untagged pvid bridge vlan add vid 10 dev eth0 Here nothing happens. This patch correct this so that any modifiers not supplied are removed from the configuration. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
The bridge code checks if vlan filtering is enabled on both ingress and egress. When the state flip happens, it is possible for the bridge to currently be forwarding packets and forwarding behavior becomes non-deterministic. Bridge may drop packets on some interfaces, but not others. This patch solves this by caching the filtered state of the packet into skb_cb on ingress. The skb_cb is guaranteed to not be over-written between the time packet entres bridge forwarding path and the time it leaves it. On egress, we can then check the cached state to see if we need to apply filtering information. Signed-off-by:
-
Nikolay Aleksandrov authored
The problem is that the slave is first linked and slave_cnt is incremented afterwards leading to a div by zero in the modes that use it as a modulus. What happens is that in bond_start_xmit() bond_has_slaves() is used to evaluate further transmission and it becomes true after the slave is linked in, but when slave_cnt is used in the xmit path it is still 0, so fetch it once and transmit based on that. Since it is used only in round-robin and XOR modes, the fix is only for them. Thanks to Eric Dumazet for pointing out the fault in my first try to fix this. Call trace (took it out of net-next kernel, but it's the same with net): [46934.330038] divide error: 0000 [#1] SMP [46934.330041] Modules linked in: bonding(O) 9p fscache snd_hda_codec_generic crct10dif_pclmul [46934.330041] bond0: Enslaving eth1 as an active interface with an up link [46934.330051] ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi floppy [last unloaded: bonding] [46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G O 3.17.0-rc4+ #27 [46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti: ffff88005b728000 [46934.330059] RIP: 0010:[<ffffffffa0198c33>] [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330060] RSP: 0018:ffff88005b72b7f8 EFLAGS: 00010246 [46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX: 000000000000002a [46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI: ffff88004b077940 [46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09: ffff88004a83e000 [46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12: ffff88004b3f0500 [46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15: ffff88004b077940 [46934.330063] FS: 00007fbd91a4c740(0000) GS:ffff88005f080000(0000) knlGS:0000000000000000 [46934.330064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4: 00000000000406e0 [46934.330069] Stack: [46934.330071] ffffffff811e6169 00000000e772fa05 ffff88004b077000 ffff88004b3f0500 [46934.330072] ffffffff81d17d18 000000000000002a 0000000000000000 ffff88005b72b8a0 [46934.330073] ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4 ffff88005b302000 [46934.330073] Call Trace: [46934.330077] [<ffffffff811e6169>] ? __kmalloc_node_track_caller+0x119/0x300 [46934.330084] [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410 [46934.330086] [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90 [46934.330088] [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590 [46934.330089] [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20 [46934.330090] [<ffffffff8168f022>] arp_xmit+0x22/0x60 [46934.330091] [<ffffffff8168f090>] arp_send.part.16+0x30/0x40 [46934.330092] [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0 [46934.330094] [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0 [46934.330096] [<ffffffff8162875a>] neigh_probe+0x4a/0x70 [46934.330097] [<ffffffff8162979c>] __neigh_event_send+0xac/0x230 [46934.330098] [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220 [46934.330100] [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0 [46934.330101] [<ffffffff81660478>] ip_finish_output+0x1f8/0x860 [46934.330102] [<ffffffff81661f08>] ip_output+0x58/0x90 [46934.330103] [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0 [46934.330104] [<ffffffff81661640>] ip_local_out_sk+0x30/0x40 [46934.330105] [<ffffffff81662a66>] ip_send_skb+0x16/0x50 [46934.330106] [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40 [46934.330107] [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30 [46934.330110] [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60 [46934.330111] [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0 [46934.330113] [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0 [46934.330114] [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0 [46934.330115] bond0: Adding slave eth2 [46934.330116] [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0 [46934.330118] [<ffffffff81603248>] ? move_addr_to_kernel.part.20+0x28/0x80 [46934.330121] [<ffffffff811b4477>] ? might_fault+0x47/0x50 [46934.330122] [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0 [46934.330125] [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530 [46934.330127] [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50 [46934.330129] [<ffffffff81242b38>] ? fsnotify+0x238/0x310 [46934.330130] [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90 [46934.330131] [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20 [46934.330134] [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b [46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9 1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c 89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00 [46934.330146] RIP [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330146] RSP <ffff88005b72b7f8> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> Fixes: 278b2083 ("bonding: initial RCU conversion") Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8169: fix rx vlan There are two issues for hw rx vlan. The patches are used to fix them. ==================== Signed-off-by: -
hayeswang authored
The setting should depend on the new features not the current one. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed. Signed-off-by:
-
Mugunthan V N authored
During suspend and resume in Dual EMAC, second port is not working as in suspend/resume only the first slave netdev is closed and opened. So bring down and up all the interfaces that are up during suspend/resume. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Tested-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
- 12 Sep, 2014 7 commits
-
-
Mark Einon authored
nstat->multicast refers to received packets, not transmitted as is returned here. Change it so that received packet stats are given. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-09-11 Please pull this batch of fixes intended for the 3.17 stream: For the mac80211 bits, Johannes says: "Two more fixes for mac80211 - one of them addresses a long-standing issue that we only found when using vendor events more frequently; the other addresses some bad information being reported in userspace that people were starting to actually look at." For the iwlwifi bits, Emmanuel says: "I re-enable scheduled scan on firmware that contain the fix for the bug that Linus reported. A few trivial fixes: endianity issues, the same DTIM period fix that I did in mac80211. Eyal fixes a few issues we identified with EAPOL, we now send them just as if they were management frames, this solves interrop issues. Johannes has another set of trivial fixes, while Luca fixes the way we configure the filters in the firmware. Last but not least, a new device is added by Oren." Emmanuel was traveling, resulting in his pull to be a bit larger than I would have liked to see at this point. FWIW, I have asked Emmanuel to be much more strict for any more pull requests in this cycle. In addition to the above, Sujith Manoharan reverts an earlier ath9k patch. The earlier change was found to allow for the device to sleep too long and miss beacons. ==================== Signed-off-by: -
git://gitorious.org/linux-can/linux-canDavid S. Miller authored
Marc Kleine-Budde says: ==================== pull-request: can 2014-09-11 this is a pull request for the current release cycle of a single patch. The patch by David Jander fixes a scheduling while atomic problem in the flexcan driver, that was introduced by me in v3.14-rc6. ==================== Signed-off-by: -
Sabrina Dubroca authored
If we try to rmmod the driver for an interface while sockets with setsockopt(JOIN_ANYCAST) are alive, some refcounts aren't cleaned up and we get stuck on: unregister_netdevice: waiting for ens3 to become free. Usage count = 1 If we LEAVE_ANYCAST/close everything before rmmod'ing, there is no problem. We need to perform a cleanup similar to the one for multicast in addrconf_ifdown(how == 1). Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
Beniamino Galvani says: ==================== net: arc_emac: fix tx issues the patches below solve some issues found in the tx ring reclaim strategy currently implemented in the arc_emac driver. Without these patches a simple outgoing UDP flow blocks almost immediately with the socket send buffer full, until some new rx packets trigger a clean of the tx ring. Everything seems to work fine on a Radxa Rock with this fix applied. ==================== Signed-off-by: -
Beniamino Galvani authored
This patch changes the logic in tx path to ensure that tx descriptors are reused for transmission only after they have been reclaimed by arc_emac_tx_clean(). Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
-
Beniamino Galvani authored
In the current implementation the cleaning of tx ring is done by the NAPI poll handler, which is scheduled after rx interrupts. Thus, in absence of received packets the reclaim of used tx buffers is never executed, blocking further transmission. This can be easily reproduced starting the transmission of a UDP flow with iperf, which blocks almost immediately because skbs are not returned to the stack and the socket send buffer becomes full. The patch enables tx interrupts so that the tx reclaim is scheduled after completed transmissions. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 11 Sep, 2014 2 commits
-
-
Sujith Manoharan authored
This reverts commit 09ebb810. ath9k_hw_set_sta_beacon_timers() configures AR_TIM_PERIOD with the beacon interval. Before this commit, the sleepduration was never greater than the beacon interval. But now, the behavior has changed. For example, with an AP that uses a beacon interval of 100: ath: phy9: next beacon 61128704 ath: phy9: beacon period 204800 ath: phy9: DTIM period 204800 If the sleepduration is calculated based on the listen time, then the bmiss threshold should also be changed since the HW would be in sleep state for a longer time, but that is not done currently. To avoid configuring a higher beacon interval based on the sleepduration, revert to the original behavior. Power consumption is not a problem since PS is disabled in ath9k anyway. Cc: stable@vger.kernel.org Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
David Jander authored
Apparently can_restart() runs from a (timer-) interrupt and can call flexcan_chip_[en|dis]able(), so avoid using usleep_range() Signed-off-by:
David Jander <david@protonic.nl> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- 10 Sep, 2014 11 commits
-
-
Markos Chandras authored
MIPS supports BPF JIT since v3.16-rc1 Cc: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Or Gerlitz authored
We wrongly tested QP context bits without BE conversion as was spotted by sparse... drivers/infiniband/hw/mlx4/qp.c:1685:38: sparse: restricted __be32 degrades to integer Fix that! Fixes: d2fce8a9 ('mlx4: Set user-space raw Ethernet QPs to properly handle VXLAN traffic') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4 SRIOV fixes This series contains few SRIOV related fixes from Matan, please apply to net. ==================== Signed-off-by: -
Matan Barak authored
Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by:Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Matan Barak authored
The current wrapper implementation of the UPDATE_QP command tries to get the MAC index, even if MAC wasn't set by the VF. Fix it up to only handle the MAC field if it's valid. Fixes: ce8d9e0d ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support') Signed-off-by:
-
Matan Barak authored
When doing VGT->VST->VGT state changes, we used an incorrect mask for the vlan-stripping-disable (VSD) flag, hence the vlan related policy for user-space Raw Ethernet QPs open by VFs wasn't really applied. Fix that, by using the correct mask. Fixes: f0f829bf ('net/mlx4_core: Add immediate activate for VGT->VST->VGT') Signed-off-by:
-
Matan Barak authored
Single port VFs are seen PCI wise on both ports of the PF (we don't have single port PFs with ConnectX). With this in mind, it's possible for virtualization tools to try and configure a single ported VF through the "wrong" PF port. To handle that, we use the PF driver mapping of single port VFs to NIC ports and adjust the port value before calling into the low level code that does the actual VF configuration Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
-
Mugunthan V N authored
In Dual EMAC, when both interface are up and while doing ifdown with heavy traffic then skbs already processed by DMA from that slave emac has to be requeued as still the other interface is up and running. Signed-off-by:
-
David Howells authored
Fix a missing __user annotation in a cast of a user space pointer (found by checker). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Masanari Iida authored
This patch adds missing space between "interface" and "by" in bonding module parameter description. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Ani Sinha authored
Linux manpage for recvmsg and sendmsg calls does not explicitly mention setting msg_namelen to 0 when msg_name passed set as NULL. When developers don't set msg_namelen member in msghdr, it might contain garbage value which will fail the validation check and sendmsg and recvmsg calls from kernel will return EINVAL. This will break old binaries and any code for which there is no access to source code. To fix this, we set msg_namelen to 0 when msg_name is passed as NULL from userland. Signed-off-by:
Ani Sinha <ani@arista.com> Signed-off-by:
-
- 09 Sep, 2014 2 commits
-
-
-
John W. Linville authored
Merge tag 'mac80211-for-john-2014-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Two more fixes for mac80211 - one of them addresses a long-standing issue that we only found when using vendor events more frequently; the other addresses some bad information being reported in userspace that people were starting to actually look at." Signed-off-by:
-
- 08 Sep, 2014 8 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: systemport and bcmgenet OOM fixes These two patches fix similar Out of Memory code paths in the SYSTEMPORT and GENET drivers. Under high memory pressure, we could produce an OOPS by passing a NULL pointer to dma_unmap_single(). ==================== Signed-off-by: -
Florian Fainelli authored
There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by:
-
Florian Fainelli authored
There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by:
-
Ivan Vecera authored
The driver does not support pause autonegotiation so it should return -EINVAL when the function is called with non-zero autoneg. Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Aaro Koskinen authored
Fix the following compiler warning: drivers/net/ethernet/octeon/octeon_mgmt.c: In function 'octeon_mgmt_clean_tx_buffers': drivers/net/ethernet/octeon/octeon_mgmt.c:295:4: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] u64 ns = cvmx_read_csr(CVMX_MIXX_TSTAMP(p->port)); ^ Signed-off-by:Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
Eric Dumazet authored
In commit d9b2938a ("net: attempt a single high order allocation) I forgot to update kerneldoc, as @prio parameter was renamed to @gfp Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David L Stevens authored
The sunvnet driver does not have an rmb() in the ring consumer corresponding to the wmb() in the producer. According to Documentation/memory-barriers.txt: "When dealing with CPU-CPU interactions, certain types of memory barrier should always be paired. A lack of appropriate pairing is almost certainly an error." In cases where an rmb() is not a no-op and a consumer is removing data from the ring while a producer is adding new entries, a load reorder would allow CPU1 CPU2 ---- ---- LOAD desc.size [e.g] STORE desc.size <wmb> set desc.hdr.state = VIO_DESC_READY LOAD desc.hdr.state [because VIO_DESC_READY, use old desc.size, already loaded out of order] [CPU2 has reordered apparently unrelated LOADs] To ensure other desc fields are not loaded before checking VIO_DESC_READY, we need an rmb() between the check and desc data accesses. I've also moved the viodbg() call to after the rmb() so that it, too, has current descriptor data even with reordering, which has the side effect that it won't print anything for descriptors that are not VIO_DESC_READY as before. That's a) probably a good thing, since the fields are not necessarily set and, b) better than adding another rmb() just for viodbg(). This would not be possible if strict-ordering is enforced, but then the memory barriers should be no-ops in that case. Signed-off-by:
David L Stevens <david.stevens@oracle.com> Signed-off-by:
-
Eyal Shapira authored
The idea here is to translate a value of 0 received from the firmware to the lowest rssi figure. As rx_status->chain_signal is a signed byte the lowest possible value is -128 and not -256. -256 was causing 0 to get stored in the signed byte. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
