- 23 Apr, 2019 12 commits
-
-
David S. Miller authored
Paul Gortmaker says: ==================== clean up needless use of module infrastructure People can embed modular includes and modular exit functions into code that never use any of it, and they won't get any errors or warnings. Using modular infrastructure in non-modules might seem harmless, but some of the downfalls this leads to are: (1) it is easy to accidentally write unused module_exit removal code (2) it can be misleading when reading the source, thinking a driver can be modular when the Makefile and/or Kconfig prohibit it (3) an unused include of the module.h header file will in turn include nearly everything else; adding a lot to CPP overhead. (4) it gets copied/replicated into other drivers and spreads quickly. As a data point for #3 above, an empty C file that just includes the module.h header generates over 750kB of CPP output. Repeating the same experiment with init.h and the result is less than 12kB; with export.h it is only about 1/2kB; with both it still is less than 12kB. One driver in this series gets the module.h ---> init.h+export.h conversion. Worse, are headers in include/linux that in turn include <linux/module.h> as they can impact a whole fleet of drivers, or a whole subsystem, so special care should be used in order to avoid that. Such headers should only include what they need to be stand-alone; they should not be trying to anticipate the various header needs of their possible end users. In this series, four include/linux headers have module.h removed from them because they don't strictly need it. Then three chunks of net related code have modular infrastructure that isn't used, removed. There are no runtime changes, so the biggest risk is a genuine consumer of module.h content relying on implicitly getting it from one of the include/linux instances removed here - thus resulting in a build fail. With that in mind, allmodconfig build testing was done on x86-64, arm64, x86-32, arm. powerpc, and mips on linux-next (and hence net-next). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: net/strparser/Kconfig:config STREAM_PARSER net/strparser/Kconfig: def_bool n ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. For clarity, we change the fcn name mod_init to dev_init at the same time. We replace module.h with init.h and export.h ; the latter since this file exports some syms. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The Kconfig controlling this code is: bpfilter/Kconfig:menuconfig BPFILTER bpfilter/Kconfig: bool "BPF based packet filtering framework (BPFILTER)" Since it isn't a module, we shouldn't use module_init(). Instead we use device_initcall() - which is exactly what module_init() defaults to for non-modular code/builds. We don't remove <linux/module.h> from the includes since this file does a request_module() and hence is a valid user of that header file, even though it is not modular itself. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: net/Kconfig:config CGROUP_NET_PRIO net/Kconfig: bool "Network priority cgroup" ...meaning that it currently is not being built as a module by anyone, as module support was discontinued in 2014. We delete the MODULE_LICENSE tag since all that information is already contained at the top of the file in the comments. We don't delete module.h from the includes since it was no longer there to begin with. Cc: "David S. Miller" <davem@davemloft.net> Cc: Tejun Heo <tj@kernel.org> Cc: "Rosen, Rami" <rami.rosen@intel.com> Cc: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
Ideally, header files under include/linux shouldn't be adding includes of other headers, in anticipation of their consumers, but just the headers needed for the header itself to pass parsing with CPP. The module.h is particularly bad in this sense, as it itself does include a whole bunch of other headers, due to the complexity of module support. Since tc_ife.h is not going into a module struct looking for specific fields, we can just let it know that module is a struct, just like about 60 other include/linux headers already do. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
Ideally, header files under include/linux shouldn't be adding includes of other headers, in anticipation of their consumers, but just the headers needed for the header itself to pass parsing with CPP. The module.h is particularly bad in this sense, as it itself does include a whole bunch of other headers, due to the complexity of module support. Since fib_notifier.h is not going into a module struct looking for specific fields, we can just let it know that module is a struct, just like about 60 other include/linux headers already do. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
Ideally, header files under include/linux shouldn't be adding includes of other headers, in anticipation of their consumers, but just the headers needed for the header itself to pass parsing with CPP. The module.h is particularly bad in this sense, as it itself does include a whole bunch of other headers, due to the complexity of module support. There doesn't appear to be anything in net/ife.h that is module related, and build coverage doesn't appear to show any other files/drivers relying implicitly on getting it from here. So it appears we are simply free to just remove it in this case. Cc: Yotam Gigi <yotam.gi@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
Ideally, header files under include/linux shouldn't be adding includes of other headers, in anticipation of their consumers, but just the headers needed for the header itself to pass parsing with CPP. The module.h is particularly bad in this sense, as it itself does include a whole bunch of other headers, due to the complexity of module support. There doesn't appear to be anything in psample.h that is module related, and build coverage doesn't appear to show any other files/drivers relying implicitly on getting it from here. So it appears we are simply free to just remove it in this case. Cc: Yotam Gigi <yotam.gi@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
The header contains rtnh_ macros so rename the file accordingly. Allows a later patch to use the nexthop.h name for the new nexthop code. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
fib6_info_nh_lwt is no longer used; remove it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel T. Lee authored
This patch makes trivial whitespace fix to the function tcp_v4_check at include/net/tcp.h file. It has stylistic issue, which is "space required after that ','" and it can be confirmed with ./scripts/checkpatch.pl tool. ERROR: space required after that ',' (ctx:VxV) #29: FILE: include/net/tcp.h:1317: + return csum_tcpudp_magic(saddr,daddr,len,IPPROTO_TCP,base); ^ Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-04-22 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) allow stack/queue helpers from more bpf program types, from Alban. 2) allow parallel verification of root bpf programs, from Alexei. 3) introduce bpf sysctl hook for trusted root cases, from Andrey. 4) recognize var/datasec in btf deduplication, from Andrii. 5) cpumap performance optimizations, from Jesper. 6) verifier prep for alu32 optimization, from Jiong. 7) libbpf xsk cleanup, from Magnus. 8) other various fixes and cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Apr, 2019 5 commits
-
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== Allow the bpf verifier to run in parallel for root. ==================== Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Drop bpf_verifier_lock for root to avoid being DoS-ed by unprivileged. The BPF verifier is now fully parallel. All unpriv users are still serialized by bpf_verifier_lock to avoid exhausting kernel memory by running N parallel verifications. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Move three global variables protected by bpf_verifier_lock into 'struct bpf_verifier_env' to allow parallel verification. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
Document the verifier limits. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
David Ahern authored
The RTF_ADDRCONF flag filters out routes added by RA's in determining which routes can be appended to an existing one to create a multipath route. Restore the flag check and add a comment to document the RA piece. Fixes: 4e54507a ("ipv6: Simplify rt6_qualify_for_ecmp") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Apr, 2019 7 commits
-
-
David Ahern authored
After commit c7a1ce39 ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create"), the gateway is no longer filled in for fib6_nh structs in a prefix route. Accordingly, the RTF_ADDRCONF flag check can be dropped from the 'rt6_qualify_for_ecmp'. Further, RTF_DYNAMIC is only set in rt6_info instances, so it can be removed from the check as well. This reduces rt6_qualify_for_ecmp and the mlxsw version to just checking if the nexthop has a gateway which is the real indication of whether entries can be coalesced into a multipath route. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuqian Huang authored
The pointer should be printed with %p or %px rather than cast to unsigned long type and printed with %08lx. Change %08lx to %p to print the pointer. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuqian Huang authored
Pointers should be printed with %p or %px rather than cast to long type and printed with %8.8lx. Change %8.8lx to %p to print the pointer. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuqian Huang authored
Pointers should be printed with %p or %px rather than cast to long type and printed with %x. Change %x to %p to print the pointers. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Small routing improvements Patch #1 switches the driver to use a unique and stable ECMP/LAG seed. This allows for consistent behavior across reboots and avoids hash polarization at the same time. Patch #2 relaxes the FIB rule validation in the driver to allow the installation of rules that direct locally generated traffic (iif=lo). This does not result in a discrepancy between both data paths because packets received by the device would never match such rules. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Currently, mlxsw does not support policy-based routing (PBR) and therefore forbids the installation of non-default FIB rules except for the l3mdev rule which is used for VRFs. Relax the check to allow the installation of FIB rules that would never match packets received by the device. Specifically, if the iif is that of the loopback netdev. This is useful for users that need to redirect locally generated packets based on FIB rules. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In order to get a consistent behavior of traffic flows across reboots / module unload, we need to use the same ECMP/LAG seed. Calculate the seed by hashing the base MAC of the device. This results in a seed that is both unique (to avoid polarization) and consistent. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Apr, 2019 15 commits
-
-
Pablo Cascón authored
By default VFs are not trusted. Add ndo_set_vf_trust support to toggle a new per-VF bit. Coupled with FW with this capability allows a trusted VF to change its MAC even after being administratively set by the PF. Also populate the trusted field on ndo_get_vf_config. Add the same ndo to the representors. Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some DFX info for HNS3 driver This patch-set adds some DFX information to HNS3 driver, for easily debug some problems, and fixes some related bugs. [patch 1/12 - 4/12] adds debug info about reset & interrupt events [patch 5/12 - 7/12] adds debug info about TX time out & fixes related bugs [patch 8/12] adds support for setting netif message level [patch 9/12 - 10/12] adds debugfs command to dump NCL & MAC info [patch 11/12] adds VF's queue statistics info updating [patch 12/12] adds a check for debugfs help function to decide which commands are supportable ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yufeng Mo authored
PF supports all debugfs command, but VF only supports part of debugfs command. So VF should not show unsupported help information. This patch adds a check for PF and PF to show the supportable help information. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
liuzhongzhu authored
This patch updates VF's TQP statistic info in the service task, and adds a limitation to prevent update too frequently. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weihang Li authored
MAC tnl interruptions are different from other type of RAS and MSI-X errors, because some bits, such as OVF/LR/RF will occur during link up and down. The drivers should clear status of all MAC tnl interruption bits but shouldn't print any message that would mislead the users. In case that link down and re-up in a short time because of some reasons, we record when they occurred, and users can query them by debugfs. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weihang Li authored
This patch allow users to dump content of NCL_CONFIG by using debugfs command. Command format: echo dump ncl_config <offset> <length> > cmd It will print as follows: hns3 0000:7d:00.0: offset | data hns3 0000:7d:00.0: 0x0000 | 0x00000020 hns3 0000:7d:00.0: 0x0004 | 0x00000400 hns3 0000:7d:00.0: 0x0008 | 0x08020401 Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yonglong Liu authored
This patch adds support for network interface message level settings. The message level can be changed by module parameter or ethtool. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Currently we just print few information when tx timeout happens. In order to find out the cause of timeout, this patch prints more information about the packet statistics, tqp registers and napi state. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
In function hns3_get_tx_timeo_queue_info(), it should use netdev->num_tx_queues, instead of netdve->real_num_tx_queues as the loop limitation. Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
In current codes, tx_timeout_cnt is used before increased, then we can see the tx_timeout_count is still 0 from the print when tx timeout happens, e.g. "hns3 0000:7d:00.3 eth3: tx_timeout count: 0, queue id: 0, SW_NTU: 0xa6, SW_NTC: 0xa4, HW_HEAD: 0xa4, HW_TAIL: 0xa6, INT: 0x1" The tx_timeout_cnt should be updated before used. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When wait for response timeout or response code not match, there should be more information for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
When received vector0 msix and other event interrupt, it should print the value of the register for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
This patch adds some statistics for VF reset. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
This patch adds statistics for PF's reset information, also, provides a debugfs command to dump these statistics. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
McCabe, Robert J authored
The BPF_PROG_LOAD condition for kernel version <= 5.1 is log->len_total > UINT_MAX >> 8 /* (16 * 1024 * 1024) - 1 */ Signed-off-by: McCabe, Robert J <robert.mccabe@rockwellcollins.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
- 19 Apr, 2019 1 commit
-
-
Eric Dumazet authored
tcp sendmsg() and sendpage() normally advance skb->data_len and skb->truesize by the payload added to an skb. But sendmsg(fd, ..., MSG_ZEROCOPY) has to account for whole pages, even if a single byte of payload is used in the page. This means that we can not assume skb->truesize can be adjusted by skb->data_len. We must instead overwrite its value. Otherwise skb->truesize is too big and can hit socket sndbuf limit, especially if the skb is recycled multiple times :/ Fixes: 472c2e07 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-