- 19 Oct, 2018 10 commits
-
-
Mark Brown authored
-
Richard Fitzgerald authored
Increase the address value width in the debug log from 4 digits to 8 digits to allow for DSP cores with larger memory address ranges. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Richard Fitzgerald authored
The wm_adsp_buffer struct is the control header of a circular buffer used to transfer data from the firmware over the control interface to an ALSA compressed stream. The original names of the fields pointing to the data buffer were based on ADSP2V2 memory layout where they correspond to {XM, XM, YM}. But this circular buffer could be used on other types of DSP core that have different memory region types. Also the names and description of the size fields were not very clear. The field names and descriptions have been changed to be generic and not imply any particular memory types. This patch updates the wm_adsp driver to the new field names. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add MCLK dapm to allow configuration of cirrus CS42l51 codec as a master clock consumer. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add master clock generation support in STM32 SAI. The master clock provided by SAI can be used to feed a codec. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add clocks properties to cs42l51 Cirrus codec, to support master clock provider. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
add mclk provider support to stm32 sai Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Marcel Ziswiler authored
Fix a few trivial aka cosmetic only checkpatch issues like long lines, wrong indentations, spurious blanks and newlines, missing newlines, multi-line comments etc. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Currently, on power down for a CODEC to CODEC DAI link we only call digital_mute and shutdown. Provide a little more flexibility for drivers by adding a call to hw_free as well. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
I just added a couple missing tabs. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 17 Oct, 2018 13 commits
-
-
Kuninori Morimoto authored
R-Car datasheet is indicating that WS output settings of SSICR::SWSP is inverted on TDM mode from non TDM mode settings. But, it is meaning that TDM should use 0 here. Without this patch, sound input/output 1ch will be 2ch, 2ch will be 3ch ..., be jumbled on I2S + TDM settings. This patch fixup it. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Some SSIs are sharing each pins (= WS/CLK pin for playback/capture). Then, SSI parent needs control WS/CLK setting for SSI slave. In such case, SSI parent needs TDM settings if SSI slave is working as TDM mode. But it is not cared in current driver. It can't capture TDM sound without this patch if SSIs were pin sharing. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 with TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
LEFT_J / I2S only can use TDM. commit 594680ea ("ASoC: pcm3168a: add hw constraint for channel") commit 38096889 ("ASoC: pcm3168a: add HW constraint for non RIGHT_J") added channel constraint for it, but, it was only for playback. This patch adds constraint for capture. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
The STA32x chips feature an XTI clock input that needs to be stable before the reset signal is released. Therefore, the chip driver needs to get a handle to the clock. Instead of relying on other parts of the system to enable the clock, let the codec driver grab a handle itself. In order to keep existing boards working, clock support is made optional. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
David Lin authored
Add driver for NAU88C22. Signed-off-by: David Lin <CTLIN0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Marcel Ziswiler authored
Similar to the following: commit 43217236 ("ASoC: tegra_alc5632: fix device_node refcounting") commit 7c5dfd54 ("ASoC: tegra: fix device_node refcounting") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vasily Khoruzhick authored
Allwinner A64 uses the same digital codec part as in A33, so we need to build this driver on ARM64 as well. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vasily Khoruzhick authored
The internal codec on A64 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block. Add an ASoC component driver for it. This should be tied to the codec audio card as an auxiliary device. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vasily Khoruzhick authored
The internal codec on Allwinner A64 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block just as on A23/A33/H3. Add a binding for this hardware. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vasily Khoruzhick authored
It will be reused by sun50i-codec-analog later. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vasily Khoruzhick authored
BCLK / LRCK ratio should be sample size * channels, but it was hardcoded to 32 (0x1 is 32 as per A33 and A64 datasheets). Calculate it basing on sample size and number of channels. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Marcus Cooper authored
The I2S block used for the audio codec in the A64 differs from other 3 I2S modules in A64 and isn't compatible with H3. But it is very similar to what is found in A10(sun4i). However, its TX FIFO is located at a different address. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Christoph Hellwig authored
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Oct, 2018 3 commits
-
-
Mac Chiang authored
This patch adds da7219_max98927 machine driver entry into machine table Signed-off-by: Mac Chiang <mac.chiang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mac Chiang authored
This patch adds Kabylake I2S machine driver with: DA7219 audio codec(SSP1) and MAXIM98927(SSP0) speaker amplifier. Signed-off-by: Mac Chiang <mac.chiang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Akshu Agrawal authored
Some 3 pole connectors report impedance greater than threshold of 1000Ohm. Thus, da7219 reports them as LINEOUT. Adding the SND_JACK_LINEOUT type so that we don't fail to detect any 3 pole jack type. Also, changing SND_JACK_HEADPHONE | SND_JACK_MICROPHONE -> SND_JACK_HEADSET Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 12 Oct, 2018 4 commits
-
-
Kuninori Morimoto authored
pcm3168a is supporting TDM on I2S/Left_J, but there is no settings for it. This patch add it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
LEFT_J / I2S only can use TDM. This patch adds channel constraint for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
RIGHT_J only can handle 16bit data bits. Current driver just errored if user requests non RIGHT_J + 16bit combination. But it is not useful for user. This patch adds HW constraint for it, and avoid error on such situation. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
The ESD watchdog code in sta32x_watchdog() dereferences the pointer which is never assigned. This is a regression from a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") which went unnoticed since nobody seems to use that ESD workaround. Fixes: a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
- 11 Oct, 2018 4 commits
-
-
Ryan Lee authored
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ryan Lee authored
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ryan Lee authored
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ryan Lee authored
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Oct, 2018 3 commits
-
-
Kuninori Morimoto authored
Current audio-graph-card is supporting mclk-fs on CPU node side only. But having Codec node also is good idea. It will be just ignored if not defined. "rcpu_ep" is same as "cpu_ep", This patch tidyup it, too. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
commit fb2815f4 ("ASoC: rsnd: add support for 16/24 bit slot widths") added TDM width check, and return error if it was not 16/24/32 bit. But it is too strict. This patch uses 32bit same as default. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
max98988 only builds with I2C support enabled, otherwise we get a build error: sound/soc/codecs/max98088.c:1789:1: error: data definition has no type or storage class [-Werror] module_i2c_driver(max98088_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/max98088.c:1789:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] sound/soc/codecs/max98088.c:1789:1: error: parameter names (without types) in function declaration [-Werror] sound/soc/codecs/max98088.c:1780:26: error: 'max98088_i2c_driver' defined but not used [-Werror=unused-variable] Fixes: 24ae67c5 ("ASoC: max98988: make it selectable") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Oct, 2018 3 commits
-
-
Marco Felsch authored
Currently the driver will build only if SND_SOC_ALL_CODECS is set. Adding a Kconfig menu description to build the driver standalone. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Andreas Färber authored
If master clock is provided through device tree, then update the master clock frequency during set_sysclk. Cc: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Tushar Behera <trblinux@gmail.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [m.felsch@pengutronix.de: move mclk request to i2c_probe] [m.felsch@pengutronix.de: make use of snd_soc_component_get_bias_level()] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Marco Felsch authored
Allow setting the clock provider for the external clock called "mclk". Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-