This patch adds a new generic decompression framework
in order to replace the old LZ4-specific decompression code.

Even though LZ4 is still the only supported algorithm, yet
it is more cleaner and easy to integrate new algorithm than
the old almost hard-coded decompression backend.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stagingpages are behaved as bounce pages for temporary use.
Move to compress.h since the upcoming decompressor will
allocate stagingpages as well.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves per-CPU buffers to utils.c in order for
the upcoming generic decompression framework to use it.

Note that I tried to use generic per-CPU buffer or
per-CPU page approaches to clean up further, but obvious
performanace regression (about 2% for sequential read) was
observed.

Therefore let's leave it as it is instead, just move
to utils.c and I'll try to dig into the root cause later.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch aims at compacted compression indexes:
 1) cleanup z_erofs_map_blocks_iter and move into zmap.c;
 2) add compacted 4/2B decoding support.

On kirin980 platform, sequential read is increased about
6% (725MiB/s -> 770MiB/s) on enwik9 dataset if compacted 2B
feature is enabled.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces new compacted compression indexes.

In contract to legacy compression indexes that
   each 4k logical cluster has an 8-byte index,
compacted ondisk compression indexes will have
   amortized 2 bytes for each 4k logical cluster (compacted 2B)
   amortized 4 bytes for each 4k logical cluster (compacted 4B)

In detail, several continuous clusters will be encoded in
a compacted pack with cluster types, offsets, and one blkaddr
at the end of the pack to leave 4-byte margin for better
decoding performance, as illustrated below:
   _____________________________________________
  |___@_____ encoded bits __________|_ blkaddr _|
  0       .                                     amortized * vcnt
  .          .
  .             .                   amortized * vcnt - 4
  .                .
  .___________________.
  |_type_|_clusterofs_|

Note that compacted 2 / 4B should be aligned with 32 / 8 bytes
in order to avoid each pack crossing page boundary.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi's acquisition buffer allocation code can allocate the buffer from
normal kernel memory or from DMA coherent memory depending on the
`dma_async_dir` value in the comedi subdevice.  (A value of `DMA_NONE`
causes the buffer to be allocated from normal kernel memory.  Other
values cause the buffer to be allocated from DMA coherent memory.)   The
buffer currently consists of a bunch of page-sized blocks that are
vmap'ed into a contiguous range of virtual addresses. The pages are also
mmap'able into user address space.  For DMA'able buffers, these
page-sized blocks are allocated by `dma_alloc_coherent()`.

For DMA-able buffers, the DMA API is currently abused in various ways,
the most serious abuse being the calling of `virt_to_page()` on the
blocks allocated by `dma_alloc_coherent()` and passing those pages to
`vmap()` (for mapping to the kernels vmalloc address space) and via
`page_to_pfn()` to `remap_pfn_range()` (for mmap'ing to user space).  it
also uses the `__GFP_COMP` flag when allocating the blocks, and marks
the allocated pages as reserved (which is unnecessary for DMA coherent
allocations).

The code can be changed to get rid of the vmap'ed address altogether if
necessary, since there are only a few places in the comedi code that use
the vmap'ed address directly and we also keep a list of the kernel
addresses for the individual pages prior to the vmap operation. This
would add some run-time overhead to buffer accesses.  The real killer is
the mmap operation.

For mmap, the address range specified in the VMA needs to be mmap'ed to
the individually allocated page-sized blocks.  That is not a problem
when the pages are allocated from normal kernel memory as the individual
pages can be remapped by `remap_pfn_range()`, but it is a problem when
the page-sized blocks are allocated by `dma_alloc_coherent()` because
the DMA API currently has no support for splitting a VMA across multiple
blocks of DMA coherent memory (or rather, no support for mapping part of
a VMA range to a single block of DMA coherent memory).

In order to comply with the DMA API and allow the buffer to be mmap'ed,
the buffer needs to be allocated as a single block by a single call to
`dma_alloc_coherent()`, freed by a single call to `dma_free_coherent()`,
and mmap'ed to user space by a single call to `dma_mmap_coherent()`.
This patch changes the buffer allocation, freeing, and mmap'ing code to
do that, with the unfortunate consequence that buffer allocation is more
likely to fail.  It also no longer uses the `__GFP_COMP` flag when
allocating DMA coherent memory, no longer marks the
allocated pages of DMA coherent memory as reserved, and no longer vmap's
the DMA coherent memory pages (since they are contiguous anyway).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 3e5bc68f as it
causes build errors in linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the fixes and this resolves a merge issue as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull iommu fix from Joerg Roedel:
 "Revert a commit from the previous pile of fixes which causes new
  lockdep splats. It is better to revert it for now and work on a better
  and more well tested fix"

* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"

This reverts commit 7560cc3c.

With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:

    ======================================================
    WARNING: possible circular locking dependency detected
    5.2.0-rc5 #78 Not tainted
    ------------------------------------------------------
    swapper/0/1 is trying to acquire lock:
    00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
    but task is already holding lock:
    00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
    which lock already depends on the new lock.
    the existing dependency chain (in reverse order) is:
    -> #1 (device_domain_lock){....}:
           _raw_spin_lock_irqsave+0x3c/0x50
           dmar_insert_one_dev_info+0xbb/0x510
           domain_add_dev_info+0x50/0x90
           dev_prepare_static_identity_mapping+0x30/0x68
           intel_iommu_init+0xddd/0x1422
           pci_iommu_init+0x16/0x3f
           do_one_initcall+0x5d/0x2b4
           kernel_init_freeable+0x218/0x2c1
           kernel_init+0xa/0x100
           ret_from_fork+0x3a/0x50
    -> #0 (&(&iommu->lock)->rlock){+.+.}:
           lock_acquire+0x9e/0x170
           _raw_spin_lock+0x25/0x30
           domain_context_mapping_one+0xa5/0x4e0
           pci_for_each_dma_alias+0x30/0x140
           dmar_insert_one_dev_info+0x3b2/0x510
           domain_add_dev_info+0x50/0x90
           dev_prepare_static_identity_mapping+0x30/0x68
           intel_iommu_init+0xddd/0x1422
           pci_iommu_init+0x16/0x3f
           do_one_initcall+0x5d/0x2b4
           kernel_init_freeable+0x218/0x2c1
           kernel_init+0xa/0x100
           ret_from_fork+0x3a/0x50

    other info that might help us debug this:
     Possible unsafe locking scenario:
           CPU0                    CPU1
           ----                    ----
      lock(device_domain_lock);
                                   lock(&(&iommu->lock)->rlock);
                                   lock(device_domain_lock);
      lock(&(&iommu->lock)->rlock);

     *** DEADLOCK ***
    2 locks held by swapper/0/1:
     #0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
     #1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0

    stack backtrace:
    CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78
    Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018
    Call Trace:
     dump_stack+0x85/0xc0
     print_circular_bug.cold.57+0x15c/0x195
     __lock_acquire+0x152a/0x1710
     lock_acquire+0x9e/0x170
     ? domain_context_mapping_one+0xa5/0x4e0
     _raw_spin_lock+0x25/0x30
     ? domain_context_mapping_one+0xa5/0x4e0
     domain_context_mapping_one+0xa5/0x4e0
     ? domain_context_mapping_one+0x4e0/0x4e0
     pci_for_each_dma_alias+0x30/0x140
     dmar_insert_one_dev_info+0x3b2/0x510
     domain_add_dev_info+0x50/0x90
     dev_prepare_static_identity_mapping+0x30/0x68
     intel_iommu_init+0xddd/0x1422
     ? printk+0x58/0x6f
     ? lockdep_hardirqs_on+0xf0/0x180
     ? do_early_param+0x8e/0x8e
     ? e820__memblock_setup+0x63/0x63
     pci_iommu_init+0x16/0x3f
     do_one_initcall+0x5d/0x2b4
     ? do_early_param+0x8e/0x8e
     ? rcu_read_lock_sched_held+0x55/0x60
     ? do_early_param+0x8e/0x8e
     kernel_init_freeable+0x218/0x2c1
     ? rest_init+0x230/0x230
     kernel_init+0xa/0x100
     ret_from_fork+0x3a/0x50

domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.

That should be introduced by commit:

7560cc3c ("iommu/vt-d: Fix lock inversion between iommu->lock and
              device_domain_lock", 2019-05-27)

So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.

We can continue to try to find the real culprit mentioned in
7560cc3c, but for now I think we should revert it to fix current
breakage.

CC: Joerg Roedel <joro@8bytes.org>
CC: Lu Baolu <baolu.lu@linux.intel.com>
CC: dave.jiang@intel.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull PCI fix from Bjorn Helgaas:
 "If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2
  because we don't yet know how to support P2PDMA in that case (Logan
  Gunthorpe)"

* tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present

Pull SCSI fixes from James Bottomley:
 "Three driver fixes (and one version number update): a suspend hang in
  ufs, a qla hard lock on module removal and a qedi panic during
  discovery"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix hardlockup in abort command during driver remove
  scsi: ufs: Avoid runtime suspend possibly being blocked forever
  scsi: qedi: update driver version to 8.37.0.20
  scsi: qedi: Check targetname while finding boot target information

Pull powerpc fixes from Michael Ellerman:
 "This is a frustratingly large batch at rc5. Some of these were sent
  earlier but were missed by me due to being distracted by other things,
  and some took a while to track down due to needing manual bisection on
  old hardware. But still we clearly need to improve our testing of KVM,
  and of 32-bit, so that we catch these earlier.

  Summary: seven fixes, all for bugs introduced this cycle.

   - The commit to add KASAN support broke booting on 32-bit SMP
     machines, due to a refactoring that moved some setup out of the
     secondary CPU path.

   - A fix for another 32-bit SMP bug introduced by the fast syscall
     entry implementation for 32-bit BOOKE. And a build fix for the same
     commit.

   - Our change to allow the DAWR to be force enabled on Power9
     introduced a bug in KVM, where we clobber r3 leading to a host
     crash.

   - The same commit also exposed a previously unreachable bug in the
     nested KVM handling of DAWR, which could lead to an oops in a
     nested host.

   - One of the DMA reworks broke the b43legacy WiFi driver on some
     people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.

   - A fix for TLB flushing in KVM introduced a new bug, as it neglected
     to also flush the ERAT, this could lead to memory corruption in the
     guest.

  Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
  Finger, Michael Neuling, Suraj Jitindar Singh"

* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
  powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
  KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
  KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
  powerpc/32: fix build failure on book3e with KVM
  powerpc/booke: fix fast syscall entry on SMP
  powerpc/32s: fix initial setup of segment registers on secondary CPU

When trying to align the minimum encryption key size requirement for
Bluetooth connections, it turns out doing this in a central location in
the HCI connection handling code is not possible.

Original Bluetooth version up to 2.0 used a security model where the
L2CAP service would enforce authentication and encryption.  Starting
with Bluetooth 2.1 and Secure Simple Pairing that model has changed into
that the connection initiator is responsible for providing an encrypted
ACL link before any L2CAP communication can happen.

Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and
before devices are causing a regression.  The encryption key size check
needs to be moved out of the HCI connection handling into the L2CAP
channel setup.

To achieve this, the current check inside hci_conn_security() has been
moved into l2cap_check_enc_key_size() helper function and then called
from four decisions point inside L2CAP to cover all combinations of
Secure Simple Pairing enabled devices and device using legacy pairing
and legacy service security model.

Fixes: d5bb334a ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
    Nault.

 2) Don't access the DDM interface unless the transceiver implements it
    in bnx2x, from Mauro S. M. Rodrigues.

 3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
    JingYi Hou.

 4) Sign extension overflow in lio_core, from Colin Ian King.

 5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.

 6) Fix epollout hang in hvsock, from Sunil Muthuswamy.

 7) Fix regression in default fib6_type, from David Ahern.

 8) Handle memory limits in tcp_fragment more appropriately, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  tcp: refine memory limit test in tcp_fragment()
  inet: clear num_timeout reqsk_alloc()
  net: mvpp2: debugfs: Add pmap to fs dump
  ipv6: Default fib6_type to RTN_UNICAST when not set
  net: hns3: Fix inconsistent indenting
  net/af_iucv: always register net_device notifier
  net/af_iucv: build proper skbs for HiperTransport
  net/af_iucv: remove GFP_DMA restriction for HiperTransport
  net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
  hvsock: fix epollout hang from race condition
  net/udp_gso: Allow TX timestamp with UDP GSO
  net: netem: fix use after free and double free with packet corruption
  net: netem: fix backlog accounting for corrupted GSO frames
  net: lio_core: fix potential sign-extension overflow on large shift
  tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
  ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
  ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
  tun: wake up waitqueues after IFF_UP is set
  net: remove duplicate fetch in sock_getsockopt
  tipc: fix issues with early FAILOVER_MSG from peer
  ...

tcp_fragment() might be called for skbs in the write queue.

Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.

Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.

Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull rdma fixes from Doug Ledford:
 "This is probably our last -rc pull request. We don't have anything
  else outstanding at the moment anyway, and with the summer months on
  us and people taking trips, I expect the next weeks leading up to the
  merge window to be pretty calm and sedate.

  This has two simple, no brainer fixes for the EFA driver.

  Then it has ten not quite so simple fixes for the hfi1 driver. The
  problem with them is that they aren't simply one liner typo fixes.
  They're still fixes, but they're more complex issues like livelock
  under heavy load where the answer was to change work queue usage and
  spinlock usage to resolve the problem, or issues with orphaned
  requests during certain types of failures like link down which
  required some more complex work to fix too. They all look like
  legitimate fixes to me, they just aren't small like I wish they were.

  Summary:

   - 2 minor EFA fixes

   - 10 hfi1 fixes related to scaling issues"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/efa: Handle mmap insertions overflow
  RDMA/efa: Fix success return value in case of error
  IB/hfi1: Handle port down properly in pio
  IB/hfi1: Handle wakeup of orphaned QPs for pio
  IB/hfi1: Wakeup QPs orphaned on wait list after flush
  IB/hfi1: Use aborts to trigger RC throttling
  IB/hfi1: Create inline to get extended headers
  IB/hfi1: Silence txreq allocation warnings
  IB/hfi1: Avoid hardlockup with flushlist_lock
  IB/hfi1: Correct tid qp rcd to match verbs context
  IB/hfi1: Close PSM sdma_progress sleep window
  IB/hfi1: Validate fault injection opcode user input

Pull more NFS client fixes from Anna Schumaker:
 "These are mostly refcounting issues that people have found recently.
  The revert fixes a suspend recovery performance issue.

   - SUNRPC: Fix a credential refcount leak

   - Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"

   - SUNRPC: Fix xps refcount imbalance on the error path

   - NFS4: Only set creation opendata if O_CREAT"

* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Fix a credential refcount leak
  Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
  net :sunrpc :clnt :Fix xps refcount imbalance on the error path
  NFS4: Only set creation opendata if O_CREAT

GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks.  This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read.  This will segfault on bare metal.

This fixes commit 459e3a21 ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code.  There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.

On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.

Cc: stable@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All callers of __rpc_clone_client() pass in a value for args->cred,
meaning that the credential gets assigned and referenced in
the call to rpc_new_client().
Reported-by: Ido Schimmel <idosch@idosch.org>
Fixes: 79caa5fa ("SUNRPC: Cache cred of process creating the rpc_client")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Jon Hunter reports:
  "I have been noticing intermittent failures with a system suspend test on
   some of our machines that have a NFS mounted root file-system. Bisecting
   this issue points to your commit 43123581 ("SUNRPC: Declare RPC
   timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
   appear to resolve the problem.

   The cause of the suspend failure appears to be a long delay observed
   sometimes when resuming from suspend, and this is causing our test to
   timeout."

This reverts commit 43123581.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget
to release it before return, may lead to a memory leak.
Signed-off-by: Lin Yi <teroincn@163.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up.  This leads to a crash in
current_umask().

Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT.  We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull ARM fix from Russell King:
 "Just one ARM fix this time around for Jason Donenfeld, fixing a
  problem with the VDSO generation on big endian"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8867/1: vdso: pass --be8 to linker if necessary

Pull drm fixes from Dave Airlie:
 "Just catching up on the week since back from holidays, everything
  seems quite sane.

  core:
   - copy_to_user fix for really legacy codepaths.

  vmwgfx:
   - two dma fixes
   - one virt hw interaction fix

  i915:
   - modesetting fix
   - gvt fix

  panfrost:
   - BO unmapping fix

  imx:
   - image converter fixes"

* tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Don't clobber M/N values during fastset check
  drm: return -EFAULT if copy_to_user() fails
  drm/panfrost: Make sure a BO is only unmapped when appropriate
  drm/i915/gvt: ignore unexpected pvinfo write
  gpu: ipu-v3: image-convert: Fix image downsize coefficients
  gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
  gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
  drm/vmwgfx: fix a warning due to missing dma_parms
  drm/vmwgfx: Honor the sg list segment size limitation
  drm/vmwgfx: Use the backdoor port if the HB port is not available

Pull staging/IIO/counter fixes from Greg KH:
 "Here are some small driver bugfixes for some staging/iio/counter
  drivers.

  Staging and IIO have been lumped together for a while, as those
  subsystems cross the areas a log, and counter is used by IIO, so
  that's why they are all in one pull request here.

  These are small fixes for reported issues in some iio drivers, the
  erofs filesystem, and a build issue for counter code.

  All have been in linux-next with no reported issues"

* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: erofs: add requirements field in superblock
  counter/ftm-quaddec: Add missing dependencies in Kconfig
  staging: iio: adt7316: Fix build errors when GPIOLIB is not set
  iio: temperature: mlx90632 Relax the compatibility check
  iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  staging:iio:ad7150: fix threshold mode config bit

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small driver fixes for 5.2-rc6

  Nothing major, just fixes for reported issues:
   - soundwire fixes
   - thunderbolt fixes
   - MAINTAINERS update for fpga maintainer change
   - binder bugfix
   - habanalabs 64bit pointer fix
   - documentation updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: use u64_to_user_ptr() for reading user pointers
  doc: fix documentation about UIO_MEM_LOGICAL using
  MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
  docs: fb: Add TER16x32 to the available font names
  MAINTAINERS: fpga: hand off maintainership to Moritz
  thunderbolt: Implement CIO reset correctly for Titan Ridge
  binder: fix possible UAF when freeing buffer
  thunderbolt: Make sure device runtime resume completes before taking domain lock
  soundwire: intel: set dai min and max channels correctly
  soundwire: stream: fix bad unlock balance
  soundwire: stream: fix out of boundary access on port properties

Pull USB fixes from Greg KH:
 "Here are four small USB fixes for 5.2-rc6.

  They include two xhci bugfixes, a chipidea fix, and a small dwc2 fix.
  Nothing major, just nice things to get resolved for reported issues.

  All have been in linux-next with no reported issues"

* tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: detect USB 3.2 capable host controllers correctly
  usb: xhci: Don't try to recover an endpoint if port is in error state.
  usb: dwc2: Use generic PHY width in params setup
  usb: chipidea: udc: workaround for endpoint conflict issue

Pull still more SPDX updates from Greg KH:
 "Another round of SPDX updates for 5.2-rc6

  Here is what I am guessing is going to be the last "big" SPDX update
  for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
  that were "easy" to determine by pattern matching. The ones after this
  are going to be a bit more difficult and the people on the spdx list
  will be discussing them on a case-by-case basis now.

  Another 5000+ files are fixed up, so our overall totals are:
	Files checked:            64545
	Files with SPDX:          45529

  Compared to the 5.1 kernel which was:
	Files checked:            63848
	Files with SPDX:          22576

  This is a huge improvement.

  Also, we deleted another 20000 lines of boilerplate license crud,
  always nice to see in a diffstat"

* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
  ...

Pull cifs fixes from Steve French:
 "Four small SMB3 fixes, all for stable"

* tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix GlobalMid_Lock bug in cifs_reconnect
  SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
  cifs: add spinlock for the openFileList to cifsInodeInfo
  cifs: fix panic in smb2_reconnect

Remove function r8712_init_cmd_priv as all it does is call
_init_cmd_priv.
Rename _init_cmd_priv to r8712_init_cmd_priv to maintain compatibility
with call sites.
Change type of new r8712_init_cmd_priv from static to non-static as
original r8712_init_cmd_priv was non-static.
Change return type of new r8712_init_cmd_priv to int as original had
return type u32 but new (formerly _init_cmd_priv) had return type sint.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function r8712_setrfintfs_cmd.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function r8712_setfwra_cmd.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function r8712_setfwdig_cmd().
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function r8712_setbasicrate_cmd.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver has dependencies on mt7621-gpio and mt7621-pci-phy which
are init in later stages. Hence, when this driver is probed it is always
returning 'EPROBE_DEFER' and being initialized afterwards. Use function
'module_init' to just initialize later.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The clock which has been used here is not about the phy but the pcie port.
It has been properly handled into host pcie driver code. Hence, remove it
from here which is the correct thing to do.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing call to 'phy_exit' function if the phy_power_on call fails.
With this call added the error path is properly handled.

Fixes: 07420a02 ("staging: mt7621-pci: use gpio perst instead of builtin behaviour")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When there is no pcie link detected we have to properly disable the
port pcie clock.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>