- 15 Jan, 2019 11 commits
-
-
Hangbin Liu authored
We forgot to update ip6erspan version related info when changing link, which will cause setting new hwid failed. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
When adding checks to detect wrong usage of the phylib API we added a check to phy_start_aneg() which is too strict. If the phylib state machine is in state PHY_HALTED we should allow reconfiguring and restarting aneg, and just don't touch the state. Fixes: 2b3e88ea ("net: phy: improve phy state checking") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Kirsher authored
This reverts commit 59361316. Due to problems found in additional testing, this causes an illegal context switch in the RCU read-side critical section. CC: Dave Jones <davej@codemonkey.org.uk> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jan Jablonsky <jan.jablonsky@thalesgroup.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
This should be == instead of =. Fixes: b52354aa ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
IPv4 routing tables are flushed in two cases: 1. In response to events in the netdev and inetaddr notification chains 2. When a network namespace is being dismantled In both cases only routes associated with a dead nexthop group are flushed. However, a nexthop group will only be marked as dead in case it is populated with actual nexthops using a nexthop device. This is not the case when the route in question is an error route (e.g., 'blackhole', 'unreachable'). Therefore, when a network namespace is being dismantled such routes are not flushed and leaked [1]. To reproduce: # ip netns add blue # ip -n blue route add unreachable 192.0.2.0/24 # ip netns del blue Fix this by not skipping error routes that are not marked with RTNH_F_DEAD when flushing the routing tables. To prevent the flushing of such routes in case #1, add a parameter to fib_table_flush() that indicates if the table is flushed as part of namespace dismantle or not. Note that this problem does not exist in IPv6 since error routes are associated with the loopback device. [1] unreferenced object 0xffff888066650338 (size 56): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba.... e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............ backtrace: [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff unreferenced object 0xffff888061621c88 (size 48): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_.... backtrace: [<00000000733609e3>] fib_table_insert+0x978/0x1500 [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff Fixes: 8cced9ef ("[NETNS]: Enable routing configuration in non-initial namespace.") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Olivier Matz authored
In changelink ops, the ip6gre_net pointer is retrieved from dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not unlinked from its current list and is relinked into another net namespace. This corrupts the tunnel lists and can later trigger a kernel oops. Fix this by retrieving the netns from device private area. Fixes: c8632fc3 ("net: ip6_gre: Split up ip6gre_changelink()") Cc: Petr Machata <petrm@mellanox.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This is the first batch of Netfilter fixes for your net tree: 1) Fix endless loop in nf_tables rules netlink dump, from Phil Sutter. 2) Reference counter leak in object from the error path, from Taehee Yoo. 3) Selective rule dump requires table and chain. 4) Fix DNAT with nft_flow_offload reverse route lookup, from wenxu. 5) Use GFP_KERNEL_ACCOUNT in vmalloc allocation from ebtables, from Shakeel Butt. 6) Set ifindex from route to fix interaction with VRF slave device, also from wenxu. 7) Use nfct_help() to check for conntrack helper, IPS_HELPER status flag is only set from explicit helpers via -j CT, from Henry Yen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create() It is possible to trigger a NULL pointer dereference by writing an incorrectly formatted string to the krpobe_events file" * tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
-
Andrea Righi authored
It is possible to trigger a NULL pointer dereference by writing an incorrectly formatted string to krpobe_events (trying to create a kretprobe omitting the symbol). Example: echo "r:event_1 " >> /sys/kernel/debug/tracing/kprobe_events That triggers this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 6 PID: 1757 Comm: bash Not tainted 5.0.0-rc1+ #125 Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.5.1 08/09/2018 RIP: 0010:kstrtoull+0x2/0x20 Code: 28 00 00 00 75 17 48 83 c4 18 5b 41 5c 5d c3 b8 ea ff ff ff eb e1 b8 de ff ff ff eb da e8 d6 36 bb ff 66 0f 1f 44 00 00 31 c0 <80> 3f 2b 55 48 89 e5 0f 94 c0 48 01 c7 e8 5c ff ff ff 5d c3 66 2e RSP: 0018:ffffb5d482e57cb8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff82b12720 RDX: ffffb5d482e57cf8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5d482e57d70 R08: ffffa0c05e5a7080 R09: ffffa0c05e003980 R10: 0000000000000000 R11: 0000000040000000 R12: ffffa0c04fe87b08 R13: 0000000000000001 R14: 000000000000000b R15: ffffa0c058d749e1 FS: 00007f137c7f7740(0000) GS:ffffa0c05e580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000497d46004 CR4: 00000000003606e0 Call Trace: ? trace_kprobe_create+0xb6/0x840 ? _cond_resched+0x19/0x40 ? _cond_resched+0x19/0x40 ? __kmalloc+0x62/0x210 ? argv_split+0x8f/0x140 ? trace_kprobe_create+0x840/0x840 ? trace_kprobe_create+0x840/0x840 create_or_delete_trace_kprobe+0x11/0x30 trace_run_command+0x50/0x90 trace_parse_run_command+0xc1/0x160 probes_write+0x10/0x20 __vfs_write+0x3a/0x1b0 ? apparmor_file_permission+0x1a/0x20 ? security_file_permission+0x31/0xf0 ? _cond_resched+0x19/0x40 vfs_write+0xb1/0x1a0 ksys_write+0x55/0xc0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix by doing the proper argument checks in trace_kprobe_create(). Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/lkml/20190111095108.b79a2ee026185cbd62365977@kernel.org Link: http://lkml.kernel.org/r/20190111060113.GA22841@xps-13 Fixes: 6212dd29 ("tracing/kprobes: Use dyn_event framework for kprobe events") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Ming Lei authored
Because we may call blk_mq_get_driver_tag() directly from blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may come and the above DEADLOCK is triggered. Commit ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to fix this issue by using 'spin_lock_bh', which isn't enough because we complete request from hardirq context direclty in case of multiqueue. Cc: Clark Williams <williams@redhat.com> Fixes: ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Jan, 2019 5 commits
-
-
Steven Rostedt (VMware) authored
The swap_lock used by sbitmap has a chain with locks taken from softirq, but the swap_lock is not protected from being preempted by softirqs. A chain exists of: sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock Where the sbq->ws[i].wait lock can be taken from softirq context, which means all locks below it in the chain must also be protected from softirqs. Reported-by: Clark Williams <williams@redhat.com> Fixes: 58ab5e32 ("sbitmap: silence bogus lockdep IRQ warning") Fixes: ea86ea2c ("sbitmap: amortize cost of clearing bits") Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "The patch hitting the MMC/SD subsystem is fixing up my own mess when moving semantics from MMC/SD over to gpiolib. Ulf is on vacation but I managed to reach him on chat and obtain his ACK. The other two are early-rc fixes that are not super serious but pretty annoying so I'd like to get rid of them. Summary: - Get rid of some WARN_ON() from the ACPI code - Staticize a symbol - Fix MMC polarity detection" * tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: mmc: core: don't override the CD GPIO level when "cd-inverted" is set gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "New Device Support - Add support for Power Supply to AXP813 - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803 - Add support for UART to Exynos LPASS Fix-ups: - Use supplied MACROS; ti_am335x_tscadc - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp - Regmap changes; bd9571mwv, wm5110-tables - Kconfig dependencies; MFD_AT91_USART - Supply shared data for child-devices; madera-core - Use new of_node_name_eq() API call; max77620, stmpe - Use managed resources (devm_*); tps65218 - Comment descriptions; ingenic-tcu - Coding style; madera-core Bug Fixes: - Fix section mismatches; twl-core, db8500-prcmu - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core - IRQ related fixes; tps6586x - Ensure proper initialisation sequence; qcom_rpm - Repair potential memory leak; cros_ec_dev" * tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits) mfd: exynos-lpass: Enable UART module support mfd: mc13xxx: Fix a missing check of a register-read failure mfd: cros_ec: Add commands to control codec mfd: madera: Remove spurious semicolon in while loop mfd: rave-sp: Fix typo in rave_sp_checksum comment mfd: ingenic-tcu: Fix bit field description in header mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe() mfd: Use of_node_name_eq() for node name comparisons mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove mfd: axp20x: Add supported cells for AXP803 mfd: axp20x: Re-align MFD cell entries mfd: axp20x: Add AC power supply cell for AXP813 mfd: wm5110: Add missing ASRC rate register mfd: qcom_rpm: write fw_version to CTRL_REG mfd: tps6586x: Handle interrupts on suspend mfd: madera: Add shared data for accessory detection mfd: at91-usart: Add platform dependency mfd: bd9571mwv: Add volatile register to make DVFS work mfd: ab8500-core: Return zero in get_register_interruptible() mfd: tmio: Typo s/use use/use/ ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "Fix-ups: - Use new of_node_name_eq() API call Bug Fixes: - Internally track 'enabled' state in pwm_bl - Fix auto-generated pwm_bl brightness tables parsed by DT * tag 'backlight-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: 88pm860x_bl: Use of_node_name_eq for node name comparisons backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables backlight: pwm_bl: Re-add driver internal enabled tracking
-
Henry Yen authored
This patch uses nfct_help() to detect whether an established connection needs conntrack helper instead of using test_bit(IPS_HELPER_BIT, &ct->status). The reason is that IPS_HELPER_BIT is only set when using explicit CT target. However, in the case that a device enables conntrack helper via command "echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of IPS_HELPER_BIT will not present any change, and consequently it loses the checking ability in the context. Signed-off-by: Henry Yen <henry.yen@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: John Crispin <john@phrozen.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 13 Jan, 2019 17 commits
-
-
Linus Torvalds authored
-
Jonathan Neuschäfer authored
UNAME26 is a mechanism to report Linux's version as 2.6.x, for compatibility with old/broken software. Due to the way it is implemented, it would have to be updated after 5.0, to keep the resulting versions unique. Linus Torvalds argued: "Do we actually need this? I'd rather let it bitrot, and just let it return random versions. It will just start again at 2.4.60, won't it? Anybody who uses UNAME26 for a 5.x kernel might as well think it's still 4.x. The user space is so old that it can't possibly care about differences between 4.x and 5.x, can it? The only thing that matters is that it shows "2.4.<largeenough>", which it will do regardless" Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A bigger batch than I anticipated this week, for two reasons: - Some fallout on Davinci from board file -> DTB conversion, that also includes a few longer-standing fixes (i.e. not recent regressions). - drivers/reset material that has been in linux-next for a while, but didn't get sent to us until now for a variety of reasons (maintainer out sick, holidays, etc). There's a functional dependency in there such that one platform (Altera's SoCFPGA) won't boot without one of the patches; instead of reverting the patch that got merged, I looked at this set and decided it was small enough that I'll pick it up anyway. If you disagree I can revisit with a smaller set. That being said, there's also a handful of the usual stuff: - Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved memory - Fix for PCIe reset on Macchiatobin (Armada 8K development board, what this email is sent from in fact :) - Enable a few new-merged modules for Amlogic in arm64 defconfig - Error path fixes on Integrator - Build fix for Renesas and Qualcomm - Initialization fix for Renesas RZ/G2E .. plus a few more fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: integrator: impd1: use struct_size() in devm_kzalloc() qcom-scm: Include <linux/err.h> header gpio: pl061: handle failed allocations ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries arm64: defconfig: enable modules for amlogic s400 sound card reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - two regression fixes in clone/dedupe ioctls, the generic check callback needs to lock extents properly and wait for io to avoid problems with writeback and relocation - fix deadlock when using free space tree due to block group creation - a recently added check refuses a valid fileystem with seeding device, make that work again with a quickfix, proper solution needs more intrusive changes * tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Use real device structure to verify dev extent Btrfs: fix deadlock when using free space tree due to block group creation Btrfs: fix race between reflink/dedupe and relocation Btrfs: fix race between cloning range ending at eof and writeback
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here is one small sysfs change, and a documentation update for 5.0-rc2 The sysfs change moves from using BUG_ON to WARN_ON, as discussed in an email thread on lkml while trying to track down another driver bug. sysfs should not be crashing and preventing people from seeing where they went wrong. Now it properly recovers and warns the developer. The documentation update removes the use of BUS_ATTR() as the kernel is moving away from this to use the specific BUS_ATTR_RW() and friends instead. There are pending patches in all of the different subsystems to remove the last users of this macro, but for now, don't advertise it should be used anymore to keep new ones from being introduced. Both have been in linux-next with no reported issues" * tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: driver core: remove use of BUS_ATTR sysfs: convert BUG_ON to WARN_ON
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for some reported issues. One reverts a patch that was made to the rtl8723bs driver that turned out to not be needed at all as it was a bug in clang. The others fix up some reported issues in the rtl8188eu driver and update the MAINTAINERS file to point to Larry for this driver so he can get the bug reports easier. All have been in linux-next with no reported issues" * tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: rtl8723bs: Mark ACPI table declaration as used" staging: rtl8188eu: Fix module loading from tasklet for WEP encryption staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption MAINTAINERS: Add entry for staging driver r8188eu
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported issues. The first is a simple serial driver fix for a regression that showed up in 5.0-rc1. The second one resolves a number of reported issues with the recent tty locking fixes that went into 5.0-rc1. Lots of people have tested the second one and say it resolves their issues. Both have been in linux-next with no reported issues" * tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Don't hold ldisc lock in tty_reopen() if ldisc present serial: lantiq: Do not swap register read/writes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes and quirk updates for 5.0-rc2. The majority here are some quirks for some storage devices to get them to work properly. There's also a fix here to resolve the reported issues with some audio devices that say they are UAC3 compliant, but really are not. And a fix up for the MAINTAINERS file to remove a dead url. All have been in linux-next with no reported issues" * tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: storage: Remove outdated URL from MAINTAINERS USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB usbcore: Select only first configuration for non-UAC3 compliant devices USB: storage: add quirk for SMI SM3350 USB: storage: don't insert sane sense for SPC3+ when bad sense specified usb: cdc-acm: send ZLP for Telit 3G Intel based modems
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches fix an important set of crediting (flow control) problems, and also two problems in cifs_writepages, ddressing some large i/o and also compounding issues" * tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number CIFS: Fix error paths in writeback code CIFS: Move credit processing to mid callbacks for SMB3 CIFS: Fix credits calculation for cancelled requests cifs: Fix potential OOB access of lock element array cifs: Limit memory used by lock request calls to a page cifs: move large array from stack to heap CIFS: Do not hide EINTR after sending network packets CIFS: Fix credit computation for compounded requests CIFS: Do not set credits to 1 if the server didn't grant anything CIFS: Fix adjustment of credits for MTU requests cifs: Fix a tiny potential memory leak cifs: Fix a debug message
-
git://git.pengutronix.de/git/pza/linuxOlof Johansson authored
Late reset controller changes for v5.0 This adds missing deassert functionality to the ARC HSDK reset driver, fixes some indentation and grammar issues in the kernel docs, adds a helper to count the number of resets on a device for the non-DT case as well, adds an early reset driver for SoCFPGA and simple reset driver support for Stratix10, and generalizes the uniphier USB3 glue layer reset to also cover AHCI. * tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux: reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding reset: socfpga: add an early reset driver for SoCFPGA reset: fix null pointer dereference on dev by dev_name reset: Add reset_control_get_count() reset: Improve reset controller kernel docs ARC: HSDK: improve reset driver Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu fixes for 5.0 They are all device tree fixes which also worth being in stable: - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing this area and crashing while doing it. - Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based) - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based) * tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes Fixes for the Integrator: - Handle failed allocations in the IM/PC bus attachment. - Use struct_size() for allocation. * tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: integrator: impd1: use struct_size() in devm_kzalloc() gpio: pl061: handle failed allocations Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic DT fixes for v5.0-rc - arm64: defconfig: enable modules for amlogic s400 sound card * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: defconfig: enable modules for amlogic s400 sound card Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm Driver Fixes for 5.0-rc1 * Add required includes into qcom_scm.h * tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: qcom-scm: Include <linux/err.h> header Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes This pull request fixes some more regressions on legacy DaVinci board support due to GPIO driver clean-up introduced in v4.20 kernel. These are marked for stable. Also has fixes for some long standing Audio issues on DA850 boards. * tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v5.0 Renesas SoCs: * Fix build regressions caused by move of Kconfig symbols RZ/G2E (r8a774c0) SoC: * Correct initialization order of 3DG-{A,B} in SYSC driver * tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} ARM: shmobile: fix build regressions Signed-off-by: Olof Johansson <olof@lixom.net>
-
John Hubbard authored
Commit 49e54187 ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187 ("ata: libahci_platform: comply to PHY framework") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Olof Johansson <olof@lixom.net> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 12 Jan, 2019 7 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, with little fixes all over the map - Loop caching fix for offset/bs change (Jaegeuk Kim) - Block documentation tweaks (Jeff, Jon, Weiping, John) - null_blk zoned tweak (John) - ahch mvebu suspend/resume support. Should have gone into the merge window, but there was some confusion on which tree had it. (Miquel) * tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits) ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs ata: ahci: mvebu: remove stale comment ata: libahci_platform: comply to PHY framework loop: drop caches if offset or block_size are changed block: fix kerneldoc comment for blk_attempt_plug_merge() nvme: don't initlialize ctrl->cntlid twice nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN nvme: pad fake subsys NQN vid and ssvid with zeros nvme-multipath: zero out ANA log buffer nvme-fabrics: unset write/poll queues for discovery controllers nvme-tcp: don't ask if controller is fabrics nvme-tcp: remove dead code nvme-pci: fix out of bounds access in nvme_cqe_pending nvme-pci: rerun irq setup on IO queue init errors nvme-pci: use the same attributes when freeing host_mem_desc_bufs. nvme-pci: fix the wrong setting of nr_maps block: doc: add slice_idle_us to bfq documentation block: clarify documentation for blk_{start|finish}_plug ...
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes for 57500 chips. Two small bug fixes for ring checking and context memory allocation that affect the new 57500 chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
When allocating memory pages for context memory, if the last page table should be fully populated, the current code will set nr_pages to 0 when calling bnxt_alloc_ctx_mem_blk(). This will cause the last page table to be completely blank and causing some RDMA failures. Fix it by setting the last page table's nr_pages to the remainder only if it is non-zero. Fixes: 08fe9d18 ("bnxt_en: Add Level 2 context memory paging support.") Reported-by: Eric Davis <eric.davis@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
In bnxt_hwrm_check_pf_rings(), add the proper flag to test the NQ resources. Without the proper flag, the firmware will change the NQ resource allocation and remap the IRQ, causing missing IRQs. This issue shows up when adding MQPRIO TX queues, for example. Fixes: 36d65be9 ("bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "Minor fixes for new code, corner cases, and documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed Documentation/virtual/kvm: Update URL for AMD SEV API specification KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range() kvm: sev: Fail KVM_SEV_INIT if already initialized KVM: validate userspace input in kvm_clear_dirty_log_protect() KVM: x86: Fix bit shifting in update_intel_pt_cfg
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull more drm fixes from Daniel Vetter: "Dave sends out his pull, everybody remembers holidays are over :-) Since Dave's already in weekend mode and it was quite a few patches I figured better to apply all the pulls and forward them to you. Hence here 2nd part of bugfixes for -rc2. nouveau: - backlight fix - falcon register access fix - fan fix. i915: - Disable PSR for Apple panels - Broxton ERR_PTR error state fix - Kabylake VECS workaround fix - Unwind failure on pinning the gen7 ppgtt - GVT workload request allocation fix core: - Fix fb-helper to work correctly with SDL 1.2 bugs - Fix lockdep warning in the atomic ioctl and setproperty" * tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/falcon: avoid touching registers if engine is off drm/nouveau: Don't disable polling in fallback mode drm/nouveau: register backlight on pascal and newer drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR drm/i915: init per-engine WAs for all engines drm/i915: Unwind failure on pinning the gen7 ppgtt drm/i915: Skip the ERR_PTR error state drm/i915: Disable PSR in Apple panels gpu/drm: Fix lock held when returning to user space. drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2 drm/i915/gvt: Fix workload request allocation before request add
-