This struct is no more used.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-14-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wvif->ht_info contains useless copies of sta->ht_cap and
bss_conf->ht_operation_mode. Prefer to retrieve information from the
original structs instead of rely on wvif->ht_info.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-13-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wvif->ht_info.ht_cap is a useless copy of sta->ht_cap. It makes no sense
to rely on it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-12-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most of the commands that are sent to device should take struct in
argument. In the current code, when this struct is binary compatible
with a __le32, the driver use a __le32. This behavior is error prone.
This patch fixes that and uses the specialized structs instead.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-11-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The structure hif_req_start come from hardware API. It is not intended
to be manipulated in upper layers of the driver.

In add, current code for hif_start() is too dumb. It should pack data
with hardware representation instead of leaving all work to the caller.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-10-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The structure hif_mib_arp_ip_addr_table come from hardware API. It is
not intended to be manipulated in upper layers of the driver.

In add, current code for hif_set_arp_ipv4_filter() is too dumb. It
should pack data using the hardware representation instead of leaving
all work to the caller.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-9-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The structure hif_mib_rcpi_rssi_threshold come from hardware API. It is
not intended to be manipulated in upper layers of the driver.

In add, current code for hif_set_rcpi_rssi_threshold() is dumb. It
should pack data using the hardware representation instead of leaving
all work to the caller.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-8-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hardware API use 10th of dBm for output power unit. Upper layers should
use same units than mac80211 and the conversion should be done by low
level layer of the driver (hif_set_output_power())

In add, current code of hif_set_output_power() use a __le32 while the
device API specify a specific structure for this.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-7-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The structure hif_mib_set_tx_rate_retry_policy come from hardware
API. It is not intended to be manipulated in upper layers of the driver.

So, this patch relocate handling of this structure to
hif_set_tx_rate_retry_policy() (the low level function).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-6-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rate policies (aka. tx_rate_retry_policy in hardware API) are sent to
device asynchronously from tx requests. So, the device maintains a list
of active rate policies and the tx requests only reference an existent
rate policy.

The device API allows to send multiple rate policies at once. However,
this property is very rarely used. We prefer to send rate policies one
by one and simplify the architecture.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-5-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some userspace tools (hostapd) rely on probe_resp_offload fields for
certain features.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-4-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hif_scan() return max number of jiffies to wait before the completion
indication. However, if this value is negative, an error has occurred.

Reword the code to reflect that behavior.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-3-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It appears that commit 8c7128c4 ("staging: align to fix warnings of
line over 80 characters") do slightly more than what is explained in
commit log.

Especially, it changes the output of the file rx_stats from debugfs.
From some point of view, this file can be considered as a part of the
API. Any change on it should be clearly announced.

Since the change introduced does not seems to have any justification,
revert it.
Reported-by: Pascal Prime <pascal.prime@silabs.com>
Cc: Jules Irenge <jbi.octave@gmail.com>
Fixes: 8c7128c4 ("staging: align to fix warnings of line over 80 characters")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200115135338.14374-2-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to add "ccflags-y += -I $(srctree)/drivers/staging"
just for including <most/most.h>.

Use the #include "..." directive with the correct relative path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200115164451.13203-1-masahiroy@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to not generate unnecessary noise in the kernel log,this patch
removes debug log messages.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/1579017478-3339-4-git-send-email-christian.gromm@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces all calls to pr_* functions and uses
the dev_* functions instead.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/1579017478-3339-3-git-send-email-christian.gromm@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch updates the date range in the comment section.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/1579017478-3339-2-git-send-email-christian.gromm@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch reports 'WARNING: printk() should include KERN_<LEVEL>
facility level'. Fix this by specifying a relevant KERN_<LEVEL> value
for each line in which it was missing.

Once they are fixed, checkpatch reports 'WARNING: Prefer [subsystem eg:
netdev]_dbg([subsystem]dev, ... then dev_dbg(dev, ... then
pr_debug(...  to printk(KERN_DEBUG ...'. Fix this by replacing
relevant printk_<level> statements with their netdev_<level>
equivalent.
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20200115101208.GA683742@localhost.localdomainSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable ret is being initialized with a value that
is never read and is being re-assigned later on. The
assignment is redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200114171145.375356-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable result is being initialized with a value that
is never read and is being re-assigned later on. The assignment
is redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200114172720.376286-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently when the call to prism2sta_ifst fails a netdev_err error
is reported, error return variable result is set to -1 but the
function always returns 0 for success.  Fix this by returning
the error value in variable result rather than 0.

Addresses-Coverity: ("Unused value")
Fixes: 00b3ed16 ("Staging: add wlan-ng prism2 usb driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replaced strcpy call with safer strscpy call with given length.
This elimates the need to manually null-terminate the given string,
since strscpy will null terminate the destination anyway.:
Signed-off-by: Ole Wiedemann <ole.wiedemann@fau.de>
Co-developed-by: Sebastian Scherbel <sebastian.scherbel@fau.de>
Signed-off-by: Sebastian Scherbel <sebastian.scherbel@fau.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20191213131032.22579-1-ole.wiedemann@fau.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace tabs with spaces and/or remove spaces to use typical kernel
horizontal whitespace.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200114134422.13598-5-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200114134422.13598-4-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup lines over 80 characters in rtl8188e_dm.c by adding
appropriate line breaks.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200114134422.13598-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function rtw_hal_antdiv_before_linked() returns boolean values, so
change the return type from u8 to bool.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200114134422.13598-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor rtw_hal_antdiv_before_linked() to clear checkpatch warnings.

WARNING: line over 80 characters
WARNING: else is not generally useful after a break or return
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200114134422.13598-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function ODM_GetRightChnlPlaceforIQK() returns non-zero values only
for channels > 14. According to the TODO code valid only for 5 GHz
should be removed.

- find and remove remaining code valid only for 5 GHz. Most of the
  obvious ones have been removed, but things like channel > 14 still
  exist.

Remove ODM_GetRightChnlPlaceforIQK() and replace the uses of the
return value with zero.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200110210456.13178-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning "Alignment should match open parenthesis".
Signed-off-by: Pragat Pandya <pragat.pandya@gmail.com>
Link: https://lore.kernel.org/r/20200111142233.11354-1-pragat.pandya@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parameters 'ratelen' and 'channel' of function rtw_check_network_type are
unused, remove them. Reduces object file size by 62 bytes.

  text    data     bss     dec     hex filename
398525   12896    4688  416109   6596d drivers/staging/rtl8188eu/r8188eu.o
398463   12896    4688  416047   6592f drivers/staging/rtl8188eu/r8188eu.o
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200113212939.9738-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull RISC-V fixes from Paul Walmsley:
 "Two fixes for RISC-V:

   - Clear FP registers during boot when FP support is present, rather
     than when they aren't present

   - Move the header files associated with the SiFive L2 cache
     controller to drivers/soc (where the code was recently moved)"

* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fixup obvious bug for fp-regs reset
  riscv: move sifive_l2_cache.h to include/soc

CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine
ISA Register misa. Every bit:1 indicate a feature, so we should beqz
reset_done when there is no F/D bit in csr_misa register.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[paul.walmsley@sifive.com: fix typo in commit message]
Fixes: 9e806356 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

The commit 9209fb51 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb51 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Pull iommu fixes from Joerg Roedel:

 - Two fixes for VT-d and generic IOMMU code to fix teardown on error
   handling code paths.

 - Patch for the Intel VT-d driver to fix handling of non-PCI devices

 - Fix W=1 compile warning in dma-iommu code

* tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/dma: fix variable 'cookie' set but not used
  iommu/vt-d: Unlink device if failed to add to group
  iommu: Remove device link to group on failure
  iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU

Pull i2c fixes from Wolfram Sang:
 "Two driver bugfixes, a documentation fix, and a removal of a spec
  violation for the bus recovery algorithm in the core"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: fix bus recovery stop mode timing
  i2c: bcm2835: Store pointer to bus clock
  dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60
  i2c: at91: fix clk_offset for sam9x60

Pull thread fixes from Christian Brauner:
 "This contains a series of patches to fix CLONE_SETTLS when used with
  clone3().

  The clone3() syscall passes the tls argument through struct clone_args
  instead of a register. This means, all architectures that do not
  implement copy_thread_tls() but still support CLONE_SETTLS via
  copy_thread() expecting the tls to be located in a register argument
  based on clone() are currently unfortunately broken. Their tls value
  will be garbage.

  The patch series fixes this on all architectures that currently define
  __ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
  that any architecture that enables clone3() in the future is forced to
  also implement copy_thread_tls().

  My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
  split and just have copy_thread_tls() at some point in the not too
  distant future (Maybe even renaming copy_thread_tls() back to simply
  copy_thread() once the old function is ripped from all arches). This
  is dependent now on all arches supporting clone3().

  While all relevant arches do that now there are still four missing:
  ia64, m68k, sh and sparc. They have the system call reserved, but not
  implemented. Once they all implement clone3() we can get rid of
  ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.

  This series also includes a minor fix for the arm64 uapi headers which
  caused __NR_clone3 to be missing from the exported user headers.

  Unfortunately the series came in a little late especially given that
  it touches a range of architectures. Due to the holidays not all arch
  maintainers responded in time probably due to their backlog. Will and
  Arnd have thankfully acked the arm specific changes.

  Given that the changes are straightforward and rather minimal combined
  with the fact the that clone3() with CLONE_SETTLS is broken I decided
  to send them post rc3 nonetheless"

* tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  um: Implement copy_thread_tls
  clone3: ensure copy_thread_tls is implemented
  xtensa: Implement copy_thread_tls
  riscv: Implement copy_thread_tls
  parisc: Implement copy_thread_tls
  arm: Implement copy_thread_tls
  arm64: Implement copy_thread_tls
  arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers

Pull HID fix from Jiri Kosina:
 "A regression fix for EPOLLOUT handling in hidraw and uhid"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: hidraw, uhid: Always report EPOLLOUT

Pull USB/PHY fixes from Greg KH:
 "Here are a number of USB and PHY driver fixes for 5.5-rc6

  Nothing all that unusual, just the a bunch of small fixes for a lot of
  different reported issues. The PHY driver fixes are in here as they
  interacted with the usb drivers.

  Full details of the patches are in the shortlog, and all of these have
  been in linux-next with no reported issues"

* tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: missing parentheses in USE_NEW_SCHEME
  usb: ohci-da8xx: ensure error return on variable error is set
  usb: musb: Disable pullup at init
  usb: musb: fix idling for suspend after disconnect interrupt
  usb: typec: ucsi: Fix the notification bit offsets
  USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  USB-PD tcpm: bad warning+size, PPS adapters
  phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz
  usb: chipidea: host: Disable port power only if previously enabled
  usb: cdns3: should not use the same dev_id for shared interrupt handler
  usb: dwc3: gadget: Fix request complete check
  usb: musb: dma: Correct parameter passed to IRQ handler
  usb: musb: jz4740: Silence error if code is -EPROBE_DEFER
  usb: udc: tegra: select USB_ROLE_SWITCH
  USB: core: fix check for duplicate endpoints
  phy: cpcap-usb: Drop extra write to usb2 register
  phy: cpcap-usb: Improve host vs docked mode detection
  phy: cpcap-usb: Prevent USB line glitches from waking up modem
  phy: mapphone-mdm6600: Fix uninitialized status value regression
  phy: cpcap-usb: Fix flakey host idling and enumerating of devices
  ...