- 25 Oct, 2010 21 commits
-
-
Mark Brown authored
Since it's exported we should make sure we're using the prototype others see. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Jaecheol Lee authored
This patch adds ARCH_HAS_CPUFREQ in arch/arm/Kconfig for S5PV210, and updates mach-s5pv210/Makefile for supporting build CPUFREQ driver. Signed-off-by:
Jaecheol Lee <jc.lee@samsung.com> Signed-off-by:
Sangbeom Kim <sbkim73@samsung.com> Signed-off-by:
-
Jaecheol Lee authored
This patch adds CPUFREQ driver for supporting DFS(Dynamic Frequency Scaling). Signed-off-by:
-
Jaecheol Lee authored
This patch adds some CMU(Clock Management Unit) registers for supporting CPUFREQ and some drivers. Signed-off-by:
-
Jaecheol Lee authored
This patch adds MOUT_DMC0 and SCLK_DMC0 for checking the dmc0 clock in CPUFREQ driver. Signed-off-by:
-
Jaecheol Lee authored
Current fout_apll has fixed rate value. So CPUFREQ driver gets incorrect value when finding current CPU frequency. Because some operation level need to change APLL. Added get_rate function for fout_apll can give correct frequency value when calling get_rate function. Signed-off-by:
-
Kyungmin Park authored
S5PV310 and S5PC210 support more I2C devices than previous SoCs. Add the device support code for them. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Kyungmin Park authored
S5PV310 and S5PC210 support total 8 (+ 1 dedicated for HDMI) I2C devices. Signed-off-by:
-
Kyungmin Park authored
The name of the I2C2 and I2C3 interrupt should be IIC2 and IIC3 instead of CAN0 and CAN1. Signed-off-by:
-
Kukjin Kim authored
This patch changes I2C2 and I2C3 interrupt name from IRQ_CANX to IRQ_IICX according other SoCs' I2C interrupt naming rule. Signed-off-by: -
Kukjin Kim authored
Basically S5P SoCs use the Samsung common VA address mapping where plat-samsung and use plat-s5p's mapping also. The later is a little mess. So this patch cleans it up. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: -
Kyungmin Park authored
Camera devices use the I2C0 and Gyro uese the I2C1 on universal board. Signed-off-by:
-
Kyungmin Park authored
OneNAND device support for Universal board. Signed-off-by:
-
Jeongbae Seo authored
This patch adds clock types into platform data to support external clock divider instead of internal clock divider. It is defined that what kinds of clock type is used in machine. Signed-off-by:
Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by:
-
Hyuk Lee authored
This patch adds to change bus width and host capability of HSMMC, when HSMMC is only configured with another value of bus width and host capability from default one. Signed-off-by:
Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by:
-
Hyuk Lee authored
This patch adds support HSMMC for S5PV310(SMDKV310) and S5PC210(SMDKC210). Signed-off-by:
-
Hyuk Lee authored
This patch adds initialization HSMMC device information. And HSMMC platform data like card detect, data bus width and capability is configured. Signed-off-by:
-
Hyuk Lee authored
This patch adds support HSMMC for S5PV310 and S5PC210 and setup for HSMMC host controller and also related GPIO. At most 4 channel can be used at the same time. A user can configure SDHCI data bus as 8bit or 4bit. Signed-off-by:
-
Kukjin Kim authored
This patch clean up the GPIO code and removes useless GPIO addresses. It can be calculated with offset, the 'base' member of s3c_gpio_chip is also initialized in the init function. Signed-off-by: -
Kukjin Kim authored
-
Kukjin Kim authored
When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43 (ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used in the Power Management operation (plat-samsung/pm.c). Signed-off-by:
-
- 23 Oct, 2010 19 commits
-
-
Mark Brown authored
When converting to use s3c_gpio_cfgpin_range() the function for the IISv4 block appears to have been typoed as 4 (the keypad) rather than 5 as it should be. Signed-off-by:
-
Kukjin Kim authored
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: -
Kukjin Kim authored
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: -
Kukjin Kim authored
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: -
Ben Dooks authored
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Ben Dooks authored
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by:
-
Ben Dooks authored
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by:
-
Ben Dooks authored
A number of the SDHCI code configure a GPIO to a special function and remove any pull-up, so add s3c_gpio_cfgrange_nopull() as a wrapper to the s3c_gpio_cfgall_range() to make the code that calls it fit on one line. Signed-off-by:
-
Kukjin Kim authored
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: -
Kukjin Kim authored
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: -
Kukjin Kim authored
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: -
Kukjin Kim authored
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: -
Kukjin Kim authored
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Signed-off-by: -
Ben Dooks authored
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by:
-
Ben Dooks authored
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by:
-
Kukjin Kim authored
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: -
Kukjin Kim authored
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Signed-off-by: -
Ben Dooks authored
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by:
-
Ben Dooks authored
Add a function to configure a range of GPIOs function and pull in one go, mainly for the SDHCI and framebuffer helpers which tend to do this. Signed-off-by:
-
