Commits · 821cfbb0dcfbb24506dc6958361ca2b80b928049 · nexedi / linux

22 Oct, 2017 12 commits

tools: bpftool: add a command to display bpftool version · 821cfbb0

Quentin Monnet authored Oct 19, 2017

This command can be used to print the version of the tool, which is in
fact the version from Linux taken from usr/include/linux/version.h.

Example usage:

    $ bpftool version
    bpftool v4.14.0
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

821cfbb0

tools: bpftool: show that `opcodes` or `file FILE` should be exclusive · 8dfbc6d1

Quentin Monnet authored Oct 19, 2017

For the `bpftool prog dump { jited | xlated } ...` command, adding
`opcodes` keyword (to request opcodes to be printed) will have no effect
if `file FILE` (to write binary output to FILE) is provided.

The manual page and the help message to be displayed in the terminal
should reflect that, and indicate that these options should be mutually
exclusive.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8dfbc6d1

tools: bpftool: print all relevant byte opcodes for "load double word" · 9e2308c1

Quentin Monnet authored Oct 19, 2017

The eBPF instruction permitting to load double words (8 bytes) into a
register need 8-byte long "immediate" field, and thus occupy twice the
space of other instructions. bpftool was aware of this and would
increment the instruction counter only once on meeting such instruction,
but it would only print the first four bytes of the immediate value to
load. Make it able to dump the whole 16 byte-long double instruction
instead (as would `llvm-objdump -d <program>`).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9e2308c1

tools: bpftool: print only one error message on byte parsing failure · d9c0b48d

Quentin Monnet authored Oct 19, 2017

Make error messages more consistent. Specifically, when bpftool fails at
parsing map key bytes, make it print a single error message to stderr
and return from the function, instead of (always) printing a second
error message afterwards.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

d9c0b48d

tools: bpftool: add `bpftool prog help` as real command i.r.t exit code · 9f606179

Quentin Monnet authored Oct 19, 2017

Make error messages and return codes more consistent. Specifically, make
`bpftool prog help` a real command, instead of printing usage by default
for a non-recognized "help" command. Output is the same, but this makes
bpftool return with a success value instead of an error.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9f606179

tools: bpftool: use err() instead of info() if there are too many insns · 1d84487e

Quentin Monnet authored Oct 19, 2017

Make error messages and return codes more consistent. Specifically,
replace the use of info() macro with err() when too many eBPF
instructions are received to be dumped, given that bpftool returns with
a non-null exit value in that case.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

1d84487e

tools: bpftool: fix return value when all eBPF programs have been shown · 1739c26d

Quentin Monnet authored Oct 19, 2017

Change the program to have a more consistent return code. Specifically,
do not make bpftool return an error code simply because it reaches the
end of the list of the eBPF programs to show.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

1739c26d

tools: bpftool: add pointer to file argument to print_hex() · 9cbe1f58

Quentin Monnet authored Oct 19, 2017

Make print_hex() able to print to any file instead of standard output
only, and rename it to fprint_hex(). The function can now be called with
the info() macro, for example, without splitting the output between
standard and error outputs.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9cbe1f58

net: sched: mark expected switch fall-throughs · f3ae608e

Gustavo A. R. Silva authored Oct 19, 2017

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

f3ae608e

net: rose: mark expected switch fall-throughs · a05b8c43

Gustavo A. R. Silva authored Oct 19, 2017

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a05b8c43

openvswitch: conntrack: mark expected switch fall-through · 279badc2

Gustavo A. R. Silva authored Oct 19, 2017

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case I placed a "fall through" comment on
its own line, which is what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

279badc2

net: netrom: nr_in: mark expected switch fall-through · e28101a3

Gustavo A. R. Silva authored Oct 19, 2017

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e28101a3

21 Oct, 2017 28 commits

bnxt: Move generic devlink code to new file · 3c467bf3

Steve Lin authored Oct 19, 2017

Moving generic devlink code (registration) out of VF-R code
into new bnxt_devlink file, in preparation for future work
to add additional devlink functionality to bnxt.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3c467bf3

tipc: fix broken tipc_poll() function · cb4dc41e

Jon Maloy authored Oct 19, 2017

In commit ae236fb2 ("tipc: receive group membership events via
member socket") we broke the tipc_poll() function by checking the
state of the receive queue before the call to poll_sock_wait(), while
relying that state afterwards, when it might have changed.

We restore this in this commit.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cb4dc41e

Merge branch 'net-sched-convert-cls-ndo_setup_tc-offload-calls-to-per-block-callbacks' · 471abeab

David S. Miller authored Oct 21, 2017

Jiri Pirko says:

====================
net: sched: convert cls ndo_setup_tc offload calls to per-block callbacks

This patchset is a bit bigger, but most of the patches are doing the
same changes in multiple classifiers and drivers. I could do some
squashes, but I think it is better split.

This is another dependency on the way to shared block implementation.
The goal is to remove use of tp->q in classifiers code.

Also, this provides drivers possibility to track binding of blocks to
qdiscs. Legacy drivers which do not support shared block offloading.
register one callback per binding. That maintains the current
functionality we have with ndo_setup_tc. Drivers which support block
sharing offload register one callback per block which safes overhead.

Patches 1-4 introduce the binding notifications and per-block callbacks
Patches 5-8 add block callbacks calls to classifiers
Patches 9-17 do convert from ndo_setup_tc calls to block callbacks for
             classifier offloads in drivers
Patches 18-20 do cleanup

v1->v2:
- patch1:
  - move new enum value to the end
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

471abeab