- 28 Apr, 2008 40 commits
-
-
Andrew Morton authored
Fix a couple of error-patch oopses identified by Marcio Buss in http://bugzilla.kernel.org/show_bug.cgi?id=9567. Cc: Marcio Buss <marciobuss@gmail.com> Cc: Jeff Zhou <xinzhou.sjtu@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Maik Broemme authored
Add support for the 965G and 965GM graphic chipsets to the intelfb driver. I have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics Controller and with the attached patch the framebuffer comes up. I have tested it a bit with DirectFB to make sure it is working stable. I also have an Intel Mobile GM945 and I compared the results, the programming interface of the 9xx series from Intel is mostly the same, so I think the patch should add all the functionality which the 945GM has. Signed-off-by:
Maik Broemme <mbroemme@plusserver.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Antonino Daplas <adaplas@pol.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Alexey Dobriyan authored
Note: looks like accesses to "registered_fb" are done without any exclusion so there're none in new proc code, too. This should be fixed in separate patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Andrew Morton authored
Fix bug identified by Daniel Marjamki: `m' is leaked on the error path. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10452 Cc: Daniel Marjamki <danielm77@spray.se> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Jaya Kumar authored
This patch splits hecubafb into the platform independent hecubafb and the platform dependent n411. Signed-off-by:
Jaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Sebastian Siewior authored
Right now, if request_irq or anthing after it fails than we free the firmware for the second time what might end bad :) Signed-off-by:
Sebastian Siewior <sebastian@breakpoint.cc> Acked-by:
-
Jaya Kumar authored
This patch splits metronomefb into the platform independent metronomefb and the platform dependent am200epd. Signed-off-by:
-
Jaya Kumar authored
This patch is a bugfix for hecubafb_write which would return an incorrect error value for the bytecount from framebuffer writes. Signed-off-by:
-
Jaya Kumar authored
This patch is a bugfix for the use of cfb_* functions instead of sys_* functions. sys_* should be used with vmalloced framebuffers. the previous cfb_ use would not work for callers of imageblit/etc. Signed-off-by:
-
York Sun authored
Add platform code to support Freescale DIU. The platform code includes framebuffer memory allocation, pixel format, monitor port, etc. Signed-off-by:
York Sun <yorksun@freescale.com> Signed-off-by:
Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
York Sun authored
The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by:
-
Alexey Dobriyan authored
Mostly signedness fixes. nv10_sim_state existence in both drivers suggests that one of them should be removed, but that's for later. Signed-off-by:
-
Alexey Dobriyan authored
Both FB_RIVA and FB_NVIDIA depends on PCI, so CONFIG_PCI always defined for them. Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Andres Salomon authored
Since there's no way to autodetect panel modes, we're forced to hardcode them in the driver and add a big fat #ifdef. The OLPC DCON needs a specific mode line (at 1200x900). This adds it to both gxfb and lxfb. (Jordan said: We could probably detect the panel mode, but there isn't any reason to since the panel timings are well known and won't change. While OFW detection would be good computer science fu, it would be a wasted effort since its so easy to hard code them into the table.) Signed-off-by:
Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Andres Salomon authored
If there's no VSA2 (ie, if we're using tinybios or OpenFirmware), use the GLIU's P2D Range Offset Descriptor to determine how much memory we have available for the framebuffer. Originally based on a patch by Jordan Crouse. Tested with OpenFirmware; Pascal informs me that tinybios has a stub that fills in P2D_RO0. Signed-off-by:
-
Andres Salomon authored
..Rather than using magic constants. Signed-off-by:
-
Andres Salomon authored
The Display Control's CRT_EN can be shut off when we enter FB_BLANK_POWERDOWN in an attempt to save additional power. Signed-off-by:
-
Andres Salomon authored
By default disable VT switch, but allow it to be overridden via the 'vt_switch' module arg. Signed-off-by:
-
Andres Salomon authored
Match other fb drivers (including gxfb). Also, document the current boot arguments in Documentation/fb/lxfb.txt. Signed-off-by:
-
Andres Salomon authored
This adds the ability to suspend/resume the lxfb driver, which includes: - Register and palette saving code; registers are stored in lxfb_par. A few MSR values are saved as well. - lx_powerup and lx_powerdown functions which restore/save registers and enable/disable graphic engines. - lxfb_suspend/lxfb_resume Originally based on a patch by Jordan Crouse. [akpm@linux-foundation.org: be conventional, save an ifdef] Signed-off-by: -
Andres Salomon authored
Finally, move the MSR bitfields around in lxfb.h, and rename them. Alas, most of that crap appears to be undocumented. Signed-off-by:
-
Andres Salomon authored
Finally drop the last remnants of df_regs, using vp_regs instead. Also, drop panel_width and panel_height from lxfb_par; they're unused. Signed-off-by:
-
Andres Salomon authored
- Rename various bitfield defines to match the data sheet names. - Rename DF_ register definitions to VP_ to match the data sheet; ie, DF_PAR -> VP_PAR. - for GP/DC registers, rather than defining to specific addresses, use an enum to number them sequentially and just multiply by 4 (bytes) to access them (in read_*/write_* functions). - for VP/FP registers, use an enum and multiple by 8 (bytes). They're 64bit registers. Signed-off-by:
-
Andres Salomon authored
This creates read_gp/write_gp, read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for reading and updating those registers. Note that we don't follow the 'DF' naming; those will be renamed to VP shortly. Signed-off-by:
-
Jens Rottmann authored
Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25 MHz. These are needed for small LCDs (e.g. 320x240). Also inserts some intermediate steps between pre-existing frequencies. Signed-off-by:
Jens Rottmann <JRottmann@LiPPERT-AT.de> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Nicolas Ferre authored
AT91SAM9RL soc has a 2048 bytes deep FIFO, like AT91SAM9263. [bn@niasdigital.com: fix build breakage in atmel_lcdfb] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Nicolas FERRE <nicolas.ferre@rfo.atmel.com> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Nicolas Ferre authored
Adds different wiring mode for the LCD screen. The legacy atmel LCDC IP uses a non standard color mode, "BGR-555.1" instead "RGB-565". The major part of graphic stacks for embedded systems uses only "RGB-565". It is possible to swap LCD IOs instead of doing this bit swapping by software (See application note AT91SAM9 LCD Controller http://www.atmel.com/dyn/resources/prod_documents/doc6300.pdf) This wire swapping is done on the at91sam9rl-ek board (board code using this patch will come later). Signed-off-by:
-
David Brownell authored
Teach atmel_lcdfb driver how to suspend/resume. Note that the backlight control should probably do more of the same stuff: turning off display power (more than just the backlight) and stopping the clocks (and dma to drive the no-longer-seen display). No point in wasting power to generate images that can't be observed, after all... Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Haavard Skinnemoen authored
If the user specified a fixed framebuffer address on the command line, it may have been initialized already with a splash image or something, so we shouldn't clear it. Therefore, we should only initialize the framebuffer if we allocated it ourselves. This patch also updates the AVR32 setup code to clear the framebuffer if it allocated it itself, i.e. the user didn't provide a fixed address or the reservation failed. I've updated the at91 platform code as well so that it initializes the framebuffer if it is located in SRAM, but I haven't tested that it actually works. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Nicolas FERRE <nicolas.ferre@rfo.atmel.com> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Ondrej Zajicek authored
Correct the dev arg of framebuffer_alloc() in arkfb, s3fb and vt8623fb. Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Ondrej Zajicek authored
After resume from STR, image is shifted by 8 pixels to the left. This patch fixes it. Signed-off-by:
-
Jean Delvare authored
There is no reason to drive the savagefb I2C bus at such a low speed, so bump it from 12.5 kbps to 50 kbps. The Intel (i810) and Matrox framebuffer drivers already run their I2C bus at this speed, and so are the legacy i2c-savage4 and i2c-prosavage drivers. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Roel Kluin authored
in #if 0 inactivated function msttfb_load_cursor_image() the call eieio() occurs after rather than in the loop due to missing curly brackets. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michal Januszewski authored
Don't treat valid modes returned by fb_find_mode() (best-fit modes, default modes or the first valid mode) as errors. Currently, when fb_find_mode() finds a valid mode belonging to one of the above-mentioned classes, uvesafb will ignore it and will try to set a 640x480 video mode. The expected behaviour (introduced by this patch) would be to use the valid mode returned by fb_find_mode() instead. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jean Delvare authored
There is no reason to drive the radeon I2C buses at such a low speed, so bump it from 12.5 kbps to 50 kbps. The Intel (i810) and Matrox framebuffer drivers already run their I2C bus at this speed. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jean Delvare authored
RTRACE() does exactly the same thing as the standard pr_debug() call, so just use the latter. Signed-off-by:
-
Jean Delvare authored
Fix CONFIG_FB_RADEON_DEBUG. DEBUG must be defined before including any kernel header, otherwise dev_dbg() resolves to a no-op. Also, when debugging is disabled, don't set DEBUG at all instead of setting it to 0, to comply with what the kernel headers expect. Signed-off-by:
-
Andreas Herrmann authored
Additionally provide PCI device id in character format if possible. (The printable characters were commonly used to identify the cards.) Signed-off-by:
Andreas Herrmann <aherrman@arcor.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Roel Kluin authored
Fix incorrect length for strncat by replacing it with strlcat Signed-off-by:
-
