Pull ARM SoC driver updates from Arnd Bergmann:
 "A couple of subsystems have their own subsystem maintainers but choose
  to have the code merged through the soc tree as upstream, as the code
  tends to be used across multiple SoCs or has SoC specific drivers
  itself:

   - memory controllers:

     Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
     and its drivers, starting out with a set of cleanup patches.

     A larger driver for the Tegra memory controller that was
     accidentally missed for v5.8 is now added.

   - reset controllers:

     Only minor updates to drivers/reset this time

   - firmware:

     The "turris mox" firmware driver gains support for signed firmware
     blobs The tegra firmware driver gets extended to export some debug
     information Various updates to i.MX firmware drivers, mostly
     cosmetic

   - ARM SCMI/SCPI:

     A new mechanism for platform notifications is added, among a number
     of minor changes.

   - optee:

     Probing of the TEE bus is rewritten to better support detection of
     devices that depend on the tee-supplicant user space. A new
     firmware based trusted platform module (fTPM) driver is added based
     on OP-TEE

   - SoC attributes:

     A new driver is added to provide a generic soc_device for
     identifying a machine through the SMCCC ARCH_SOC_ID firmware
     interface rather than by probing SoC family specific registers.

     The series also contains some cleanups to the common soc_device
     code.

  There are also a number of updates to SoC specific drivers, the main
  ones are:

   - Mediatek cmdq driver gains a few in-kernel interfaces

   - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
     support for additional SoC variants

   - The Qualcomm GENI core code gains interconnect path voting and
     performance level support, and integrating this into a number of
     device drivers.

   - A new driver for Samsung Exynos5800 voltage coupler for

   - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
     specific device drivers

   - Updates to the TI K3 Ring Accelerator driver"

* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
  soc: qcom: geni: Fix unused label warning
  soc: qcom: smd-rpm: Fix kerneldoc
  memory: jz4780_nemc: Only request IO memory the driver will use
  soc: qcom: pdr: Reorder the PD state indication ack
  MAINTAINERS: Add Git repository for memory controller drivers
  memory: brcmstb_dpfe: Fix language typo
  memory: samsung: exynos5422-dmc: Correct white space issues
  memory: samsung: exynos-srom: Correct alignment
  memory: pl172: Enclose macro argument usage in parenthesis
  memory: of: Correct kerneldoc
  memory: omap-gpmc: Fix language typo
  memory: omap-gpmc: Correct white space issues
  memory: omap-gpmc: Use 'unsigned int' for consistency
  memory: omap-gpmc: Enclose macro argument usage in parenthesis
  memory: omap-gpmc: Correct kerneldoc
  memory: mvebu-devbus: Align with open parenthesis
  memory: mvebu-devbus: Add missing braces to all arms of if statement
  memory: bt1-l2-ctl: Add blank lines after declarations
  soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
  firmware: ti_sci: Replace HTTP links with HTTPS ones
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly cosmetic changes and minor bugfixes for the SoC
  specific code, across the 32-bit at91, mvebu, davinci, samsung, and
  omap platforms.

  The main notable changes are for the Samsung Exynos platform, which
  sees a rewrite of gpio handling and a change to restore and adds a
  workaround for a problem with cpuidle support"

* tag 'arm-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
  MAINTAINERS: arm/amlogic: add designated reviewers
  ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()'
  ARM: davinci: Fix trivial spelling
  ARM: davinci: Replace HTTP links with HTTPS ones
  ARM: s3c24xx: Replace HTTP links with HTTPS ones
  ARM: orion/gpio: Make use of for_each_requested_gpio()
  ARM: at91: Replace HTTP links with HTTPS ones
  ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
  ARM: rpc: Change blacklist to quirklist in ecode.c file
  ARM: OMAP: Replace HTTP links with HTTPS ones
  ARM: s3c24xx: leds: Convert to use GPIO descriptors
  udc: lpc32xx: mark local function static
  ARM: exynos: MCPM: Restore big.LITTLE cpuidle support
  ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "These are the usual updates to arm/arm64 defconfig files, enabling
  newly added drivers and addressing changes to Kconfig files"

* tag 'arm-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  ARM: configs: at91: sama5: enable CAN PLATFORM driver
  ARM: configs: at91: sama5: enable bridge and VLAN filtering
  ARM: configs: at91: sama5: add support for KSZ ethernet switches
  arm64: defconfig: Enable AM654x SDHCI controller
  arm64: arch_k3: enable chipid driver
  arm/arm64: defconfig: Update configs to use the new CROS_EC options
  ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500
  ARM: tegra: Enable CPUFREQ userspace governor
  arm64: defconfig: enable CONFIG_FSL_ENETC_QOS
  arm64: defconfig: enable TSN features for ENETC and similiar hardware
  ARM: imx_v6_v7_defconfig: Support i.MX8MM
  arm64: defconfig: enable RTC and audio support on Kontron sl28 boards
  arm64: defconfig: add pca9450 pmic driver
  ARM: configs: sunxi: Enable crypto related options
  ARM: sunxi: configs: Enable the Mailbox driver
  ARM: configs: sunxi: Enable the PS/2 controller
  ARM: configs: sunxi: Enable Lima
  ARM: configs: sunxi: Add DRM output-related options
  ARM: configs: sunxi: Enable ASoC options
  ARM: configs: sunxi: Enable Cedrus
  ...

Pull x86 platform driver updates from Andy Shevchenko:

 - ASUS WMI driver honors BAT1 name of the battery (quite a few new
   laptops are using it)

 - Dell WMI driver supports new key codes and backlight events

 - ThinkPad ACPI driver now may use standard charge threshold interface,
   it also has been updated to provide Laptop or Desktop mode to the
   user

 - Intel Speed Select Technology gained support on Sapphire Rapids
   platform

 - Regular update of Speed Select Technology tools

 - Mellanox has been updated to support complex attributes

 - PMC core driver has been fixed to show correct names for LPM0
   register

 - HTTP links were replaced by HTTPS ones where it applies

 - Miscellaneous fixes and cleanups here and there

* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
  platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
  platform/x86: thinkpad_acpi: Make some symbols static
  platform/x86: thinkpad_acpi: add documentation for battery charge control
  platform/x86: thinkpad_acpi: use standard charge control attribute names
  platform/x86: thinkpad_acpi: remove unused defines
  platform/x86: ISST: drop a duplicated word in isst_if.h
  tools/power/x86/intel-speed-select: Update version for v5.9
  tools/power/x86/intel-speed-select: Add retries for mail box commands
  tools/power/x86/intel-speed-select: Add option to delay mbox commands
  tools/power/x86/intel-speed-select: Ignore -o option processing on error
  tools/power/x86/intel-speed-select: Change path for caching topology info
  platform/x86: acerhdf: Replace HTTP links with HTTPS ones
  platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
  platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
  platform/x86: mlx-platform: Extend FAN platform data description
  platform_data/mlxreg: Add presence register field for FAN devices
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/mellanox: mlxreg-io: Add support for complex attributes
  platform/x86: mlx-platform: Add more definitions for system attributes
  platform_data/mlxreg: Add support for complex attributes
  ...

Pull x86 RAS updates from Ingo Molnar:
 "Boris is on vacation and he asked us to send you the pending RAS bits:

   - Print the PPIN field on CPUs that fill them out

   - Fix an MCE injection bug

   - Simplify a kzalloc in dev_mcelog_init_device()"

* tag 'ras-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce, EDAC/mce_amd: Print PPIN in machine check records
  x86/mce/dev-mcelog: Use struct_size() helper in kzalloc()
  x86/mce/inject: Fix a wrong assignment of i_mce.status

Pull x86 timer update from Ingo Molnar:
 "Set the X86_FEATURE_TSC_KNOWN_FREQ flag for Xen guests, to avoid
  recalibration"

* tag 'x86-timers-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen/time: Set the X86_FEATURE_TSC_KNOWN_FREQ flag in xen_tsc_khz()

Pull x86 platform updates from Ingo Molnar:
 "The biggest change is the removal of SGI UV1 support, which allowed
  the removal of the legacy EFI old_mmap code as well.

  This removes quite a bunch of old code & quirks"

* tag 'x86-platform-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Remove unused EFI_UV1_MEMMAP code
  x86/platform/uv: Remove uv bios and efi code related to EFI_UV1_MEMMAP
  x86/efi: Remove references to no-longer-used efi_have_uv1_memmap()
  x86/efi: Delete SGI UV1 detection.
  x86/platform/uv: Remove efi=old_map command line option
  x86/platform/uv: Remove vestigial mention of UV1 platform from bios header
  x86/platform/uv: Remove support for UV1 platform from uv
  x86/platform/uv: Remove support for uv1 platform from uv_hub
  x86/platform/uv: Remove support for UV1 platform from uv_bau
  x86/platform/uv: Remove support for UV1 platform from uv_mmrs
  x86/platform/uv: Remove support for UV1 platform from x2apic_uv_x
  x86/platform/uv: Remove support for UV1 platform from uv_tlb
  x86/platform/uv: Remove support for UV1 platform from uv_time

Pull x86 mmm update from Ingo Molnar:
 "The biggest change is to not sync the vmalloc and ioremap ranges for
  x86-64 anymore"

* tag 'x86-mm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/64: Make sync_global_pgds() static
  x86/mm/64: Do not sync vmalloc/ioremap mappings
  x86/mm: Pre-allocate P4D/PUD pages for vmalloc area

Pull x86 MSR filtering from Ingo Molnar:
 "Filter MSR writes from user-space by default, and print a syslog entry
  if they happen outside the allowed set of MSRs, which is a single one
  for now, MSR_IA32_ENERGY_PERF_BIAS.

  The plan is to eventually disable MSR writes by default (they can
  still be enabled via allow_writes=on)"

* tag 'x86-misc-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/msr: Filter MSR writes

Pull x86 microcode update from Ingo Molnar:
 "Remove the microcode loader's FW_LOADER coupling"

* tag 'x86-microcode-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Do not select FW_LOADER

Pull x86 FPU selftest from Ingo Molnar:
 "Add the /sys/kernel/debug/selftest_helpers/test_fpu FPU self-test"

* tag 'x86-fpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/fpu: Add an FPU selftest

Pull x86 cpu updates from Ingo Molar:

 - prepare for Intel's new SERIALIZE instruction

 - enable split-lock debugging on more CPUs

 - add more Intel CPU models

 - optimize stack canary initialization a bit

 - simplify the Spectre logic a bit

* tag 'x86-cpu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Refactor sync_core() for readability
  x86/cpu: Relocate sync_core() to sync_core.h
  x86/cpufeatures: Add enumeration for SERIALIZE instruction
  x86/split_lock: Enable the split lock feature on Sapphire Rapids and Alder Lake CPUs
  x86/cpu: Add Lakefield, Alder Lake and Rocket Lake models to the to Intel CPU family
  x86/stackprotector: Pre-initialize canary for secondary CPUs
  x86/speculation: Merge one test in spectre_v2_user_select_mitigation()

Pull x86 debug fixlets from Ingo Molnar:
 "Improve x86 debuggability: print registers with the same log level as
  the backtrace"

* tag 'x86-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Show registers dump with trace's log level
  x86/dumpstack: Add log_lvl to __show_regs()
  x86/dumpstack: Add log_lvl to show_iret_regs()

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups all around the place"

* tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioperm: Initialize pointer bitmap with NULL rather than 0
  x86: uv: uv_hub.h: Delete duplicated word
  x86: cmpxchg_32.h: Delete duplicated word
  x86: bootparam.h: Delete duplicated word
  x86/mm: Remove the unused mk_kernel_pgd() #define
  x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macros
  x86/ioapic: Remove unused "IOAPIC_AUTO" define
  x86/mm: Drop unused MAX_PHYSADDR_BITS
  x86/msr: Move the F15h MSRs where they belong
  x86/idt: Make idt_descr static
  initrd: Remove erroneous comment
  x86/mm/32: Fix -Wmissing prototypes warnings for init.c
  cpu/speculation: Add prototype for cpu_show_srbds()
  x86/mm: Fix -Wmissing-prototypes warnings for arch/x86/mm/init.c
  x86/asm: Unify __ASSEMBLY__ blocks
  x86/cpufeatures: Mark two free bits in word 3
  x86/msr: Lift AMD family 0x15 power-specific MSRs

Pull x86 build updates from Ingo Molnar:
 "Misc changes: refresh defconfigs and simplify the boot image link
  stage"

* tag 'x86-build-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/defconfigs: Refresh defconfig files
  x86/build: Move max-page-size option to LDFLAGS_vmlinux
  x86/defconfigs: Remove CONFIG_CRYPTO_AES_586 from i386_defconfig

Pull x86 boot updates from Ingo Molnar:
 "The main change in this cycle was to add support for ZSTD-compressed
  kernel and initrd images.

  ZSTD has a very fast decompressor, yet it compresses better than gzip"

* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: dontdiff: Add zstd compressed files
  .gitignore: Add ZSTD-compressed files
  x86: Add support for ZSTD compressed kernel
  x86: Bump ZO_z_extra_bytes margin for zstd
  usr: Add support for zstd compressed initramfs
  init: Add support for zstd compressed kernel
  lib: Add zstd support to decompress
  lib: Prepare zstd for preboot environment, improve performance

Pull x86 asm updates from Ingo Molnar:
 "A couple of changes, concentrated into the percpu code, to enable
  Clang support on i386 kernels too"

[ And cleans up the macros to generate percpu ops a lot too  - Linus ]

* tag 'x86-asm-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/uaccess: Make __get_user_size() Clang compliant on 32-bit
  x86/percpu: Remove unused PER_CPU() macro
  x86/percpu: Clean up percpu_stable_op()
  x86/percpu: Clean up percpu_cmpxchg_op()
  x86/percpu: Clean up percpu_xchg_op()
  x86/percpu: Clean up percpu_add_return_op()
  x86/percpu: Remove "e" constraint from XADD
  x86/percpu: Clean up percpu_add_op()
  x86/percpu: Clean up percpu_from_op()
  x86/percpu: Clean up percpu_to_op()
  x86/percpu: Introduce size abstraction macros

Pull x86/alternatives update from Ingo Molnar:
 "A single commit that improves the alternatives patching syslog debug
  output"

* tag 'x86-alternatives-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Add pr_fmt() to debug macros

Pull scheduler updates from Ingo Molnar:

 - Improve uclamp performance by using a static key for the fast path

 - Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
   better power efficiency of RT tasks on battery powered devices.
   (The default is to maximize performance & reduce RT latencies.)

 - Improve utime and stime tracking accuracy, which had a fixed boundary
   of error, which created larger and larger relative errors as the
   values become larger. This is now replaced with more precise
   arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.

 - Improve the deadline scheduler, such as making it capacity aware

 - Improve frequency-invariant scheduling

 - Misc cleanups in energy/power aware scheduling

 - Add sched_update_nr_running tracepoint to track changes to nr_running

 - Documentation additions and updates

 - Misc cleanups and smaller fixes

* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
  sched/doc: Document capacity aware scheduling
  sched: Document arch_scale_*_capacity()
  arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
  Documentation/sysctl: Document uclamp sysctl knobs
  sched/uclamp: Add a new sysctl to control RT default boost value
  sched/uclamp: Fix a deadlock when enabling uclamp static key
  sched: Remove duplicated tick_nohz_full_enabled() check
  sched: Fix a typo in a comment
  sched/uclamp: Remove unnecessary mutex_init()
  arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
  sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
  arch_topology, sched/core: Cleanup thermal pressure definition
  trace/events/sched.h: fix duplicated word
  linux/sched/mm.h: drop duplicated words in comments
  smp: Fix a potential usage of stale nr_cpus
  sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
  sched: nohz: stop passing around unused "ticks" parameter.
  sched: Better document ttwu()
  sched: Add a tracepoint to track rq->nr_running
  ...

Pull perf event updates from Ingo Molnar:
 "HW support updates:

   - Add uncore support for Intel Comet Lake

   - Add RAPL support for Hygon Fam18h

   - Add Intel "IIO stack to PMON mapping" support on Skylake-SP CPUs,
     which enumerates per device performance counters via sysfs and
     enables the perf stat --iiostat functionality

   - Add support for Intel "Architectural LBRs", which generalized the
     model specific LBR hardware tracing feature into a
     model-independent, architected performance monitoring feature.

     Usage is mostly seamless to tooling, as the pre-existing LBR
     features are kept, but there's a couple of advantages under the
     hood, such as faster context-switching, faster LBR reads, cleaner
     exposure of LBR features to guest kernels, etc.

     ( Since architectural LBRs are supported via XSAVE, there's related
       changes to the x86 FPU code as well. )

  ftrace/perf updates:

   - Add support to add a text poke event to record changes to kernel
     text (i.e. self-modifying code) in order to support tracers like
     Intel PT decoding through jump labels, kprobes and ftrace
     trampolines.

  Misc cleanups, smaller fixes..."

* tag 'perf-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  perf/x86/rapl: Add Hygon Fam18h RAPL support
  kprobes: Remove unnecessary module_mutex locking from kprobe_optimizer()
  x86/perf: Fix a typo
  perf: <linux/perf_event.h>: drop a duplicated word
  perf/x86/intel/lbr: Support XSAVES for arch LBR read
  perf/x86/intel/lbr: Support XSAVES/XRSTORS for LBR context switch
  x86/fpu/xstate: Add helpers for LBR dynamic supervisor feature
  x86/fpu/xstate: Support dynamic supervisor feature for LBR
  x86/fpu: Use proper mask to replace full instruction mask
  perf/x86: Remove task_ctx_size
  perf/x86/intel/lbr: Create kmem_cache for the LBR context data
  perf/core: Use kmem_cache to allocate the PMU specific data
  perf/core: Factor out functions to allocate/free the task_ctx_data
  perf/x86/intel/lbr: Support Architectural LBR
  perf/x86/intel/lbr: Factor out intel_pmu_store_lbr
  perf/x86/intel/lbr: Factor out rdlbr_all() and wrlbr_all()
  perf/x86/intel/lbr: Mark the {rd,wr}lbr_{to,from} wrappers __always_inline
  perf/x86/intel/lbr: Unify the stored format of LBR information
  perf/x86/intel/lbr: Support LBR_CTL
  perf/x86: Expose CPUID enumeration bits for arch LBR
  ...

Pull objtool updates from Ingo Molnar:

 - Add support for non-rela relocations, in preparation to merge
   'recordmcount' functionality into objtool

 - Fix assumption that broke under --ffunction-sections (LTO) builds

 - Misc cleanups

* tag 'objtool-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Add support for relocations without addends
  objtool: Rename rela to reloc
  objtool: Use sh_info to find the base for .rela sections
  objtool: Do not assume order of parent/child functions

Pull locking updates from Ingo Molnar:

 - LKMM updates: mostly documentation changes, but also some new litmus
   tests for atomic ops.

 - KCSAN updates: the most important change is that GCC 11 now has all
   fixes in place to support KCSAN, so GCC support can be enabled again.
   Also more annotations.

 - futex updates: minor cleanups and simplifications

 - seqlock updates: merge preparatory changes/cleanups for the
   'associated locks' facilities.

 - lockdep updates:
    - simplify IRQ trace event handling
    - add various new debug checks
    - simplify header dependencies, split out <linux/lockdep_types.h>,
      decouple lockdep from other low level headers some more
    - fix NMI handling

 - misc cleanups and smaller fixes

* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  kcsan: Improve IRQ state trace reporting
  lockdep: Refactor IRQ trace events fields into struct
  seqlock: lockdep assert non-preemptibility on seqcount_t write
  lockdep: Add preemption enabled/disabled assertion APIs
  seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
  seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
  seqlock: Reorder seqcount_t and seqlock_t API definitions
  seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
  seqlock: Properly format kernel-doc code samples
  Documentation: locking: Describe seqlock design and usage
  locking/qspinlock: Do not include atomic.h from qspinlock_types.h
  locking/atomic: Move ATOMIC_INIT into linux/types.h
  lockdep: Move list.h inclusion into lockdep.h
  locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
  futex: Remove unused or redundant includes
  futex: Consistently use fshared as boolean
  futex: Remove needless goto's
  futex: Remove put_futex_key()
  rwsem: fix commas in initialisation
  docs: locking: Replace HTTP links with HTTPS ones
  ...

Pull RCU updates from Ingo Molnar:

 - kfree_rcu updates

 - RCU tasks updates

 - Read-side scalability tests

 - SRCU updates

 - Torture-test updates

 - Documentation updates

 - Miscellaneous fixes

* tag 'core-rcu-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (109 commits)
  torture: Remove obsolete "cd $KVM"
  torture: Avoid duplicate specification of qemu command
  torture: Dump ftrace at shutdown only if requested
  torture: Add kvm-tranform.sh script for qemu-cmd files
  torture: Add more tracing crib notes to kvm.sh
  torture: Improve diagnostic for KCSAN-incapable compilers
  torture: Correctly summarize build-only runs
  torture: Pass --kmake-arg to all make invocations
  rcutorture: Check for unwatched readers
  torture: Abstract out console-log error detection
  torture: Add a stop-run capability
  torture: Create qemu-cmd in --buildonly runs
  rcu/rcutorture: Replace 0 with false
  torture: Add --allcpus argument to the kvm.sh script
  torture: Remove whitespace from identify_qemu_vcpus output
  rcutorture: NULL rcu_torture_current earlier in cleanup code
  rcutorture: Handle non-statistic bang-string error messages
  torture: Set configfile variable to current scenario
  rcutorture: Add races with task-exit processing
  locktorture: Use true and false to assign to bool variables
  ...

Pull header cleanup from Ingo Molnar:
 "Separate out the instrumentation_begin()/end() bits from compiler.h"

* tag 'core-headers-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compiler.h: Move instrumentation_begin()/end() to new <linux/instrumentation.h> header

Pull debugobjects cleanup from Ingo Molnar:
 "A single commit which simplifies a debugfs attribute definition"

* tag 'core-debugobjects-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Convert to DEFINE_SHOW_ATTRIBUTE

Pull irq fixes from Ingo Molnar:
 "Fix a recent IRQ affinities regression, add in a missing debugfs
  printout that helps the debugging of IRQ affinity logic bugs, and fix
  a memory leak"

* tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/debugfs: Add missing irqchip flags
  genirq/affinity: Make affinity setting if activated opt-in
  irqdomain/treewide: Free firmware node after domain removal

Pull arm64 and cross-arch updates from Catalin Marinas:
 "Here's a slightly wider-spread set of updates for 5.9.

  Going outside the usual arch/arm64/ area is the removal of
  read_barrier_depends() series from Will and the MSI/IOMMU ID
  translation series from Lorenzo.

  The notable arm64 updates include ARMv8.4 TLBI range operations and
  translation level hint, time namespace support, and perf.

  Summary:

   - Removal of the tremendously unpopular read_barrier_depends()
     barrier, which is a NOP on all architectures apart from Alpha, in
     favour of allowing architectures to override READ_ONCE() and do
     whatever dance they need to do to ensure address dependencies
     provide LOAD -> LOAD/STORE ordering.

     This work also offers a potential solution if compilers are shown
     to convert LOAD -> LOAD address dependencies into control
     dependencies (e.g. under LTO), as weakly ordered architectures will
     effectively be able to upgrade READ_ONCE() to smp_load_acquire().
     The latter case is not used yet, but will be discussed further at
     LPC.

   - Make the MSI/IOMMU input/output ID translation PCI agnostic,
     augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
     bus-specific parameter and apply the resulting changes to the
     device ID space provided by the Freescale FSL bus.

   - arm64 support for TLBI range operations and translation table level
     hints (part of the ARMv8.4 architecture version).

   - Time namespace support for arm64.

   - Export the virtual and physical address sizes in vmcoreinfo for
     makedumpfile and crash utilities.

   - CPU feature handling cleanups and checks for programmer errors
     (overlapping bit-fields).

   - ACPI updates for arm64: disallow AML accesses to EFI code regions
     and kernel memory.

   - perf updates for arm64.

   - Miscellaneous fixes and cleanups, most notably PLT counting
     optimisation for module loading, recordmcount fix to ignore
     relocations other than R_AARCH64_CALL26, CMA areas reserved for
     gigantic pages on 16K and 64K configurations.

   - Trivial typos, duplicate words"

Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
  arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
  arm64/mm: save memory access in check_and_switch_context() fast switch path
  arm64: sigcontext.h: delete duplicated word
  arm64: ptrace.h: delete duplicated word
  arm64: pgtable-hwdef.h: delete duplicated words
  bus: fsl-mc: Add ACPI support for fsl-mc
  bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
  of/irq: Make of_msi_map_rid() PCI bus agnostic
  of/irq: make of_msi_map_get_device_domain() bus agnostic
  dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
  of/device: Add input id to of_dma_configure()
  of/iommu: Make of_map_rid() PCI agnostic
  ACPI/IORT: Add an input ID to acpi_dma_configure()
  ACPI/IORT: Remove useless PCI bus walk
  ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
  ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
  ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
  arm64: enable time namespace support
  arm64/vdso: Restrict splitting VVAR VMA
  arm64/vdso: Handle faults on timens page
  ...

Pull m68k updates from Geert Uytterhoeven:

 - several Kbuild improvements

 - several Mac fixes

 - minor cleanups and fixes

 - defconfig updates

* tag 'm68k-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v5.8-rc3
  m68k: Use CLEAN_FILES to clean up files
  m68k: mac: Improve IOP debug messages
  m68k: mac: Don't send uninitialized data in IOP message reply
  m68k: mac: Fix IOP status/control register writes
  m68k: mac: Don't send IOP message until channel is idle
  m68k: atari: Annotate dummy read in ROM port IO code as __maybe_unused
  m68k: Use sizeof_field() helper
  m68k: Pass -D options to KBUILD_CPPFLAGS instead of KBUILD_{A,C}FLAGS
  m68k: Optimize cc-option calls for cpuflags-y
  m68k: sun3: Descend to prom from arch/m68k/sun3
  m68k: Add arch/m68k/Kbuild

Pull unicore32 removal from Mike Rapoport:
 "Remove unicore32 support.

  The unicore32 port do not seem maintained for a long time now, there
  is no upstream toolchain that can create unicore32 binaries and all
  the links to prebuilt toolchains for unicore32 are dead. Even
  compilers that were available are not supported by the kernel anymore.

  Guenter Roeck says:
    "I have stopped building unicore32 images since v4.19 since there is
     no available compiler that is still supported by the kernel. I am
     surprised that support for it has not been removed from the kernel"

  However, it's worth pointing out two things:

   - Guan Xuetao is still listed as maintainer and asked for the port to
     be kept around the last time Arnd suggested removing it two years
     ago. He promised that there would be compiler sources (presumably
     llvm), but has not made those available since.

   - https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both
     released in 2016, with patches dated early 2019. These patches
     mainly restore a syscall ABI that was never part of mainline Linux
     but apparently used in production. qemu-2.8 removed support for
     that ABI and newer kernels (4.19+) can no longer be built with the
     old toolchain, so apparently there will not be any future updates
     to that git tree"

* tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux:
  MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry
  rtc: remove fb-puv3  driver
  video: fbdev: remove fb-puv3  driver
  pwm: remove pwm-puv3  driver
  input: i8042: remove support for 8042-unicore32io
  i2c/buses: remove i2c-puv3  driver
  cpufreq: remove unicore32 driver
  arch: remove unicore32 port

Pull s390 updates from Heiko Carstens:

 - Add support for function error injection.

 - Add support for custom exception handlers, as required by
   BPF_PROBE_MEM.

 - Add support for BPF_PROBE_MEM.

 - Add trace events for idle enter / exit for the s390 specific idle
   implementation.

 - Remove unused zcore memmmap device.

 - Remove unused "raw view" from s390 debug feature.

 - AP bus + zcrypt device driver code refactoring.

 - Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver.

 - Expose only minimal interface to walk physmem for mm/memblock. This
   is a common code change and it has been agreed on with Mike Rapoport
   and Andrew Morton that this can go upstream via the s390 tree.

 - Rework of the s390 vmem/vmmemap code to allow for future memory hot
   remove.

 - Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10
   allocations again, instead of only order-8 allocations.

 - Various small improvements and fixes.

* tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390/vmemmap: coding style updates
  s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections
  s390/vmemmap: remember unused sub-pmd ranges
  s390/vmemmap: fallback to PTEs if mapping large PMD fails
  s390/vmem: cleanup empty page tables
  s390/vmemmap: take the vmem_mutex when populating/freeing
  s390/vmemmap: cleanup when vmemmap_populate() fails
  s390/vmemmap: extend modify_pagetable() to handle vmemmap
  s390/vmem: consolidate vmem_add_range() and vmem_remove_range()
  s390/vmem: rename vmem_add_mem() to vmem_add_range()
  s390: enable HAVE_FUNCTION_ERROR_INJECTION
  s390/pci: clarify comment in s390_mmio_read/write
  s390/time: improve comparison for tod steering
  s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE
  s390/time: use CLOCKSOURCE_MASK
  s390/bpf: implement BPF_PROBE_MEM
  s390/kernel: expand exception table logic to allow new handling options
  s390/kernel: unify EX_TABLE* implementations
  s390/mm: allow order 10 allocations
  s390/mm: avoid trimming to MAX_ORDER
  ...

Pull io_uring updates from Jens Axboe:
 "Lots of cleanups in here, hardening the code and/or making it easier
  to read and fixing bugs, but a core feature/change too adding support
  for real async buffered reads. With the latter in place, we just need
  buffered write async support and we're done relying on kthreads for
  the fast path. In detail:

   - Cleanup how memory accounting is done on ring setup/free (Bijan)

   - sq array offset calculation fixup (Dmitry)

   - Consistently handle blocking off O_DIRECT submission path (me)

   - Support proper async buffered reads, instead of relying on kthread
     offload for that. This uses the page waitqueue to drive retries
     from task_work, like we handle poll based retry. (me)

   - IO completion optimizations (me)

   - Fix race with accounting and ring fd install (me)

   - Support EPOLLEXCLUSIVE (Jiufei)

   - Get rid of the io_kiocb unionizing, made possible by shrinking
     other bits (Pavel)

   - Completion side cleanups (Pavel)

   - Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)

   - Request environment grabbing cleanups (Pavel)

   - File and socket read/write cleanups (Pavel)

   - Improve kiocb_set_rw_flags() (Pavel)

   - Tons of fixes and cleanups (Pavel)

   - IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"

* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
  io_uring: flip if handling after io_setup_async_rw
  fs: optimise kiocb_set_rw_flags()
  io_uring: don't touch 'ctx' after installing file descriptor
  io_uring: get rid of atomic FAA for cq_timeouts
  io_uring: consolidate *_check_overflow accounting
  io_uring: fix stalled deferred requests
  io_uring: fix racy overflow count reporting
  io_uring: deduplicate __io_complete_rw()
  io_uring: de-unionise io_kiocb
  io-wq: update hash bits
  io_uring: fix missing io_queue_linked_timeout()
  io_uring: mark ->work uninitialised after cleanup
  io_uring: deduplicate io_grab_files() calls
  io_uring: don't do opcode prep twice
  io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
  io_uring: batch put_task_struct()
  tasks: add put_task_struct_many()
  io_uring: return locked and pinned page accounting
  io_uring: don't miscount pinned memory
  io_uring: don't open-code recv kbuf managment
  ...

Pull core block updates from Jens Axboe:
 "Good amount of cleanups and tech debt removals in here, and as a
  result, the diffstat shows a nice net reduction in code.

   - Softirq completion cleanups (Christoph)

   - Stop using ->queuedata (Christoph)

   - Cleanup bd claiming (Christoph)

   - Use check_events, moving away from the legacy media change
     (Christoph)

   - Use inode i_blkbits consistently (Christoph)

   - Remove old unused writeback congestion bits (Christoph)

   - Cleanup/unify submission path (Christoph)

   - Use bio_uninit consistently, instead of bio_disassociate_blkg
     (Christoph)

   - sbitmap cleared bits handling (John)

   - Request merging blktrace event addition (Jan)

   - sysfs add/remove race fixes (Luis)

   - blk-mq tag fixes/optimizations (Ming)

   - Duplicate words in comments (Randy)

   - Flush deferral cleanup (Yufen)

   - IO context locking/retry fixes (John)

   - struct_size() usage (Gustavo)

   - blk-iocost fixes (Chengming)

   - blk-cgroup IO stats fixes (Boris)

   - Various little fixes"

* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
  block: blk-timeout: delete duplicated word
  block: blk-mq-sched: delete duplicated word
  block: blk-mq: delete duplicated word
  block: genhd: delete duplicated words
  block: elevator: delete duplicated word and fix typos
  block: bio: delete duplicated words
  block: bfq-iosched: fix duplicated word
  iocost_monitor: start from the oldest usage index
  iocost: Fix check condition of iocg abs_vdebt
  block: Remove callback typedefs for blk_mq_ops
  block: Use non _rcu version of list functions for tag_set_list
  blk-cgroup: show global disk stats in root cgroup io.stat
  blk-cgroup: make iostat functions visible to stat printing
  block: improve discard bio alignment in __blkdev_issue_discard()
  block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
  block: defer flush request no matter whether we have elevator
  block: make blk_timeout_init() static
  block: remove retry loop in ioc_release_fn()
  block: remove unnecessary ioc nested locking
  block: integrate bd_start_claiming into __blkdev_get
  ...

Pull mtd fix from Richard Weinberger.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: properly check all write ioctls for permissions

Instead of waiting in a loop for the userfaultfd condition to become
true, just wait once and return VM_FAULT_RETRY.

We've already dropped the mmap lock, we know we can't really
successfully handle the fault at this point and the caller will have to
retry anyway.  So there's no point in making the wait any more
complicated than it needs to be - just schedule away.

And once you don't have that complexity with explicit looping, you can
also just lose all the 'userfaultfd_signal_pending()' complexity,
because once we've set the correct process sleeping state, and don't
loop, the act of scheduling itself will be checking if there are any
pending signals before going to sleep.

We can also drop the VM_FAULT_MAJOR games, since we'll be treating all
retried faults as major soon anyway (series to regularize and share more
of fault handling across architectures in a separate series by Peter Xu,
and in the meantime we won't worry about the possible minor - I'll be
here all week, try the veal - accounting difference).

Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull file locking fix from Jeff Layton:
 "Just a single, one-line patch to fix an inefficiency in the posix
  locking code that can lead to it doing more wakeups than necessary"

* tag 'filelock-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: add locks_move_blocks in posix_lock_inode

Pull crypto updates from Herbert Xu:
 "API:
   - Add support for allocating transforms on a specific NUMA Node
   - Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users

  Algorithms:
   - Drop PMULL based ghash on arm64
   - Fixes for building with clang on x86
   - Add sha256 helper that does the digest in one go
   - Add SP800-56A rev 3 validation checks to dh

  Drivers:
   - Permit users to specify NUMA node in hisilicon/zip
   - Add support for i.MX6 in imx-rngc
   - Add sa2ul crypto driver
   - Add BA431 hwrng driver
   - Add Ingenic JZ4780 and X1000 hwrng driver
   - Spread IRQ affinity in inside-secure and marvell/cesa"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
  crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
  hwrng: core - remove redundant initialization of variable ret
  crypto: x86/curve25519 - Remove unused carry variables
  crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
  dt-bindings: RNG: Add Ingenic RNG bindings.
  crypto: caam/qi2 - add module alias
  crypto: caam - add more RNG hw error codes
  crypto: caam/jr - remove incorrect reference to caam_jr_register()
  crypto: caam - silence .setkey in case of bad key length
  crypto: caam/qi2 - create ahash shared descriptors only once
  crypto: caam/qi2 - fix error reporting for caam_hash_alloc
  crypto: caam - remove deadcode on 32-bit platforms
  crypto: ccp - use generic power management
  crypto: xts - Replace memcpy() invocation with simple assignment
  crypto: marvell/cesa - irq balance
  crypto: inside-secure - irq balance
  crypto: ecc - SP800-56A rev 3 local public key validation
  crypto: dh - SP800-56A rev 3 local public key validation
  crypto: dh - check validity of Z before export
  lib/mpi: Add mpi_sub_ui()
  ...

Pull fsverity update from Eric Biggers:
 "One fix for fs/verity/ to strengthen a memory barrier which might be
  too weak. This mirrors a similar fix in fs/crypto/"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: use smp_load_acquire() for ->i_verity_info

Pull fscrypt updates from Eric Biggers:
 "This release, we add support for inline encryption via the blk-crypto
  framework which was added in 5.8.

  Now when an ext4 or f2fs filesystem is mounted with '-o inlinecrypt',
  the contents of encrypted files will be encrypted/decrypted via
  blk-crypto, instead of directly using the crypto API. This model
  allows taking advantage of the inline encryption hardware that is
  integrated into the UFS or eMMC host controllers on most mobile SoCs.

  Note that this is just an alternate implementation; the ciphertext
  written to disk stays the same.

  (This pull request does *not* include support for direct I/O on
  encrypted files, which blk-crypto makes possible, since that part is
  still being discussed.)

  Besides the above feature update, there are also a few fixes and
  cleanups, e.g. strengthening some memory barriers that may be too
  weak.

  All these patches have been in linux-next with no reported issues.
  I've also tested them with the fscrypt xfstests, as usual. It's also
  been tested that the inline encryption support works with the support
  for Qualcomm and Mediatek inline encryption hardware that will be in
  the scsi pull request for 5.9. Also, several SoC vendors are already
  using a previous, functionally equivalent version of these patches"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: don't load ->i_crypt_info before it's known to be valid
  fscrypt: document inline encryption support
  fscrypt: use smp_load_acquire() for ->i_crypt_info
  fscrypt: use smp_load_acquire() for ->s_master_keys
  fscrypt: use smp_load_acquire() for fscrypt_prepared_key
  fscrypt: switch fscrypt_do_sha256() to use the SHA-256 library
  fscrypt: restrict IV_INO_LBLK_* to AES-256-XTS
  fscrypt: rename FS_KEY_DERIVATION_NONCE_SIZE
  fscrypt: add comments that describe the HKDF info strings
  ext4: add inline encryption support
  f2fs: add inline encryption support
  fscrypt: add inline encryption support
  fs: introduce SB_INLINECRYPT

Pull btrfs updates from David Sterba:
 "We don't have any big feature updates this time, there are lots of
  small enhacements or fixes. A highlight perhaps is the parallel fsync
  performance improvements, numbers below.

  Regarding the dio/iomap that was reverted last time, the required API
  changes are likely to land in the upcoming cycle, the btrfs part will
  be updated afterwards.

  User visible changes:

   - new mount option rescue= to group all recovery-related mount
     options so we don't have many specific options, currently
     introducing only aliases for existing options, future extensions
     are in development to allow read-only mount with partially damaged
     structures:
      - usebackuproot is an alias for rescue=usebackuproot
      - nologreplay is an alias for rescue=nologreplay

   - start deprecation of mount option inode_cache, removal scheduled to
     v5.11

   - removed deprecated mount options alloc_start and subvolrootid

   - device stats corruption counter gets incremented when a checksum
     mismatch is found

   - qgroup information exported in /sys/fs/btrfs/<UUID>/qgroups/<id>
     using sysfs

   - add link /sys/fs/btrfs/<UUID>/bdi pointing to the associated
     backing dev info

   - FS_INFO ioctl enhancements:
      - add flags to request/describe newly added items
      - new item: numeric checksum type and checksum size
      - new item: generation
      - new item: metadata_uuid

   - seed device: with one new read-write device added, print the new
     device information in /proc/mounts

   - balance: detect cancellation by Ctrl-C in existing cancellation
     points

  Performance improvements:

   - optimized versions of various helpers on little-endian
     architectures, where we don't have to do LE/BE conversion from
     on-disk format

   - tree-log/fsync optimizations leading to lower max latency reported
     by dbench, reduced by about 12%

   - all chunk tree leaves are prefetched at mount time, can improve
     mount time on large (terabyte-sized) filesystems

   - speed up parallel fsync of files with reflinked/deduped extents,
     with jobs 16 to 1024 the throughput gets improved roughly by 50% on
     average and runtime decreased roughly by 30% on average, notable
     outlier is 128 jobs with +121.2% on throughput and -54.6% runtime

   - another speed up of parallel fsync, reduce number of checksum tree
     lookups and contention, the improvements start to show up with 2
     tasks with +20% throughput and -16% runtime up to 64 with +200%
     throughput and -66% runtime

  Core:

   - umount-time qgroup leak checker

   - qgroups
      - add a way to unreserve partial range after failure, avoiding
        some EDQUOT errors
      - improved flushing logic when EDQUOT is hit

   - possible EINTR interruption caused by failed reservations after
     transaction start is better handled and documented

   - transaction abort errors are unified to EROFS in case it's not the
     original reason of abort or we don't have other way to determine
     the reason

  Fixes:

   - make truncate succeed on a NOCOW file even if data space is
     exhausted

   - fix cancelling balance on filesystem with exhausted metadata space

   - anon block device:
      - preallocate anon bdev when subvolume is created to report
        failure early
      - shorten time the anon bdev id is allocated
      - don't allocate anon bdev for internal roots

   - minor memory leak in ref-verify

   - refuse invalid combinations of compression and NOCOW file flags

   - lockdep fixes, updating the device locks

   - remove obsolete fallback logic for block group profile adjustments
     when switching from 1 to more devices, causing allocation of
     unwanted block groups

  Other cleanups, refactoring, simplifications:

   - conversions from struct inode to struct btrfs_inode in internal
     functions

   - removal of unused struct members"

* tag 'for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (151 commits)
  btrfs: do not set the full sync flag on the inode during page release
  btrfs: release old extent maps during page release
  btrfs: fix race between page release and a fast fsync
  btrfs: open-code remount flag setting in btrfs_remount
  btrfs: if we're restriping, use the target restripe profile
  btrfs: don't adjust bg flags and use default allocation profiles
  btrfs: fix lockdep splat from btrfs_dump_space_info
  btrfs: move the chunk_mutex in btrfs_read_chunk_tree
  btrfs: open device without device_list_mutex
  btrfs: sysfs: use NOFS for device creation
  btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases
  btrfs: document special case error codes for fs errors
  btrfs: don't WARN if we abort a transaction with EROFS
  btrfs: reduce contention on log trees when logging checksums
  btrfs: remove done label in writepage_delalloc
  btrfs: add comments for btrfs_reserve_flush_enum
  btrfs: relocation: review the call sites which can be interrupted by signal
  btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree
  btrfs: relocation: allow signal to cancel balance
  btrfs: raid56: remove out label in __raid56_parity_recover
  ...