Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits)
  OMAP3: PM: Boot message is not an error, and not helpful, remove it
  OMAP3: cpuidle: change the power domains modes determination logic
  OMAP3: cpuidle: code rework for improved readability
  OMAP3: cpuidle: re-organize the C-states data
  OMAP3: clean-up mach specific cpuidle data structures
  OMAP3 cpuidle: remove useless SDP specific timings
  usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
  usb: otg: OMAP4430: Fixing the omap4430_phy_init function
  usb: musb: am35x: fix compile error when building am35x
  usb: musb: OMAP4430: Power down the PHY during board init
  omap: drop board-igep0030.c
  omap: igep0020: add support for IGEP3
  omap: igep0020: minor refactoring
  omap: igep0020: name refactoring for future merge with IGEP3
  omap: Remove support for omap2evm
  arm: omap2plus: GPIO cleanup
  omap: musb: introduce default board config
  omap: move detection of NAND CS to common-board-devices
  omap: use common initialization for PMIC i2c bus
  omap: consolidate touch screen initialization among different boards
  ...

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/4xx: Adding PCIe MSI support
  powerpc: Fix irq_free_virt by adjusting bounds before loop
  powerpc/irq: Protect irq_radix_revmap_lookup against irq_free_virt
  powerpc/irq: Check desc in handle_one_irq and expand generic_handle_irq
  powerpc/irq: Always free duplicate IRQ_LEGACY hosts
  powerpc/irq: Remove stale and misleading comment
  powerpc/cell: Rename ipi functions to match current abstractions
  powerpc/cell: Use common smp ipi actions
  Remove unused MSG_ flags in linux/smp.h
  powerpc/pseries: Update MAX_HCALL_OPCODE to reflect page coalescing
  powerpc/oprofile: Handle events that raise an exception without overflowing
  powerpc/ftrace: Implement raw syscall tracepoints on PowerPC

I stupidly broke the case of CONFIG_HUGETLBFS=n when doing the
conversion to vm_flags_t in commit ca16d140 ("mm: don't access
vm_flags as 'int'").  And my 'allyesconfig' build didn't find it, for
obvious reasons..

Include <linux/mm_types.h> in <linux/hugetlb.h>.  The problem could have
been avoided by just turning the hugetlb_file_setup() error wrapper into
a macro, but mm_types.h is a reasonable include in this file.
Reported-by: Richard -rw- Weinberger <richard.weinberger@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits)
  Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly.
  ocfs2/dlm: Do not migrate resource to a node that is leaving the domain
  ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG
  Ocfs2/move_extents: Set several trivial constraints for threshold.
  Ocfs2/move_extents: Let defrag handle partial extent moving.
  Ocfs2/move_extents: move/defrag extents within a certain range.
  Ocfs2/move_extents: helper to calculate the defraging length in one run.
  Ocfs2/move_extents: move entire/partial extent.
  Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode.
  Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.
  Ocfs2/move_extents: helper to validate and adjust moving goal.
  Ocfs2/move_extents: find the victim alloc group, where the given #blk fits.
  Ocfs2/move_extents: defrag a range of extent.
  Ocfs2/move_extents: move a range of extent.
  Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving.
  Ocfs2/move_extents: Add basic framework and source files for extent moving.
  Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2.
  Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c
  Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl.
  Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
  xen: cleancache shim to Xen Transcendent Memory
  ocfs2: add cleancache support
  ext4: add cleancache support
  btrfs: add cleancache support
  ext3: add cleancache support
  mm/fs: add hooks to support cleancache
  mm: cleancache core ops functions and config
  fs: add field to superblock to support cleancache
  mm/fs: cleancache documentation

Fix up trivial conflict in fs/btrfs/extent_io.c due to includes

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: correctly decrement the extent buffer index in xfs_bmap_del_extent
  xfs: check for valid indices in xfs_iext_get_ext and xfs_iext_idx_to_irec
  xfs: fix up asserts in xfs_iflush_fork
  xfs: do not do pointer arithmetic on extent records
  xfs: do not use unchecked extent indices in xfs_bunmapi
  xfs: do not use unchecked extent indices in xfs_bmapi
  xfs: do not use unchecked extent indices in xfs_bmap_add_extent_*
  xfs: remove if_lastex
  xfs: remove the unused XFS_BMAPI_RSVBLOCKS flag
  xfs: do not discard alloc btree blocks
  xfs: add online discard support

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits)
  jbd2: Add MAINTAINERS entry
  jbd2: fix a potential leak of a journal_head on an error path
  ext4: teach ext4_ext_split to calculate extents efficiently
  ext4: Convert ext4 to new truncate calling convention
  ext4: do not normalize block requests from fallocate()
  ext4: enable "punch hole" functionality
  ext4: add "punch hole" flag to ext4_map_blocks()
  ext4: punch out extents
  ext4: add new function ext4_block_zero_page_range()
  ext4: add flag to ext4_has_free_blocks
  ext4: reserve inodes and feature code for 'quota' feature
  ext4: add support for multiple mount protection
  ext4: ensure f_bfree returned by ext4_statfs() is non-negative
  ext4: protect bb_first_free in ext4_trim_all_free() with group lock
  ext4: only load buddy bitmap in ext4_trim_fs() when it is needed
  jbd2: Fix comment to match the code in jbd2__journal_start()
  ext4: fix waiting and sending of a barrier in ext4_sync_file()
  jbd2: Add function jbd2_trans_will_send_data_barrier()
  jbd2: fix sending of data flush on journal commit
  ext4: fix ext4_ext_fiemap_cb() to handle blocks before request range correctly
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (25 commits)
  cifs: remove unnecessary dentry_unhash on rmdir/rename_dir
  ocfs2: remove unnecessary dentry_unhash on rmdir/rename_dir
  exofs: remove unnecessary dentry_unhash on rmdir/rename_dir
  nfs: remove unnecessary dentry_unhash on rmdir/rename_dir
  ext2: remove unnecessary dentry_unhash on rmdir/rename_dir
  ext3: remove unnecessary dentry_unhash on rmdir/rename_dir
  ext4: remove unnecessary dentry_unhash on rmdir/rename_dir
  btrfs: remove unnecessary dentry_unhash in rmdir/rename_dir
  ceph: remove unnecessary dentry_unhash calls
  vfs: clean up vfs_rename_other
  vfs: clean up vfs_rename_dir
  vfs: clean up vfs_rmdir
  vfs: fix vfs_rename_dir for FS_RENAME_DOES_D_MOVE filesystems
  libfs: drop unneeded dentry_unhash
  vfs: update dentry_unhash() comment
  vfs: push dentry_unhash on rename_dir into file systems
  vfs: push dentry_unhash on rmdir into file systems
  vfs: remove dget() from dentry_unhash()
  vfs: dentry_unhash immediately prior to rmdir
  vfs: Block mmapped writes while the fs is frozen
  ...

The type of vma->vm_flags is 'unsigned long'. Neither 'int' nor
'unsigned int'. This patch fixes such misuse.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
[ Changed to use a typedef - we'll extend it to cover more cases
  later, since there has been discussion about making it a 64-bit
  type..                      - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch provides a shim between the kernel-internal cleancache
API (see Documentation/mm/cleancache.txt) and the Xen Transcendent
Memory ABI (see http://oss.oracle.com/projects/tmem).

Xen tmem provides "hypervisor RAM" as an ephemeral page-oriented
pseudo-RAM store for cleancache pages, shared cleancache pages,
and frontswap pages.  Tmem provides enterprise-quality concurrency,
full save/restore and live migration support, compression
and deduplication.

A presentation showing up to 8% faster performance and up to 52%
reduction in sectors read on a kernel compile workload, despite
aggressive in-kernel page reclamation ("self-ballooning") can be
found at:

http://oss.oracle.com/projects/tmem/dist/documentation/presentations/TranscendentMemoryXenSummit2010.pdfSigned-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

This eighth patch of eight in this cleancache series "opts-in"
cleancache for ocfs2.  Clustered filesystems must explicitly enable
cleancache by calling cleancache_init_shared_fs anytime an instance
of the filesystem is mounted.  Ocfs2 is currently the only user of
the clustered filesystem interface but nevertheless, the cleancache
hooks in the VFS layer are sufficient for ocfs2 including the matching
cleancache_flush_fs hook which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v8: trivial merge conflict update]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Nitin Gupta <ngupta@vflare.org>

This seventh patch of eight in this cleancache series "opts-in"
cleancache for ext4.  Filesystems must explicitly enable cleancache
by calling cleancache_init_fs anytime an instance of the filesystem
is mounted. For ext4, all other cleancache hooks are in
the VFS layer including the matching cleancache_flush_fs
hook which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

This sixth patch of eight in this cleancache series "opts-in"
cleancache for btrfs.  Filesystems must explicitly enable
cleancache by calling cleancache_init_fs anytime an instance
of the filesystem is mounted.  Btrfs uses its own readpage
which must be hooked, but all other cleancache hooks are in
the VFS layer including the matching cleancache_flush_fs hook
which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

This fifth patch of eight in this cleancache series "opts-in"
cleancache for ext3.  Filesystems must explicitly enable
cleancache by calling cleancache_init_fs anytime an instance
of the filesystem is mounted. For ext3, all other cleancache
hooks are in the VFS layer including the matching cleancache_flush_fs
hook which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

This fourth patch of eight in this cleancache series provides the
core hooks in VFS for: initializing cleancache per filesystem;
capturing clean pages reclaimed by page cache; attempting to get
pages from cleancache before filesystem read; and ensuring coherency
between pagecache, disk, and cleancache.  Note that the placement
of these hooks was stable from 2.6.18 to 2.6.38; a minor semantic
change was required due to a patchset in 2.6.39.

All hooks become no-ops if CONFIG_CLEANCACHE is unset, or become
a check of a boolean global if CONFIG_CLEANCACHE is set but no
cleancache "backend" has claimed cleancache_ops.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v8: minchan.kim@gmail.com: adapt to new remove_from_page_cache function]
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

This third patch of eight in this cleancache series provides
the core code for cleancache that interfaces between the hooks in
VFS and individual filesystems and a cleancache backend.  It also
includes build and config patches.

Two new files are added: mm/cleancache.c and include/linux/cleancache.h.

Note that CONFIG_CLEANCACHE can default to on; in systems that do
not provide a cleancache backend, all hooks devolve to a simple
check of a global enable flag, so performance impact should
be negligible but can be reduced to zero impact if config'ed off.
However for this first commit, it defaults to off.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

Credits: Cleancache_ops design derived from Jeremy Fitzhardinge
design for tmem

[v8: dan.magenheimer@oracle.com: fix exportfs call affecting btrfs]
[v8: akpm@linux-foundation.org: use static inline function, not macro]
[v7: dan.magenheimer@oracle.com: cleanup sysfs and remove cleancache prefix]
[v6: JBeulich@novell.com: robustly handle buggy fs encode_fh actor definition]
[v5: jeremy@goop.org: clean up global usage and static var names]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
[v5: hch@infradead.org: cleaner non-global interface for ops registration]
[v4: adilger@sun.com: interface must support exportfs FS's]
[v4: hch@infradead.org: interface must support 64-bit FS on 32-bit kernel]
[v3: akpm@linux-foundation.org: use one ops struct to avoid pointer hops]
[v3: akpm@linux-foundation.org: document and ensure PageLocked reqts are met]
[v3: ngupta@vflare.org: fix success/fail codes, change funcs to void]
[v2: viro@ZenIV.linux.org.uk: use sane types]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Acked-by: Jan Beulich <JBeulich@novell.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>

This second patch of eight in this cleancache series adds a field to
the generic superblock to squirrel away a pool identifier that is
dynamically provided by cleancache-enabled filesystems at mount time
to uniquely identify files and pages belonging to this mounted filesystem.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v8: trivial merge conflict update]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

This patchset introduces cleancache, an optional new feature exposed
by the VFS layer that potentially dramatically increases page cache
effectiveness for many workloads in many environments at a negligible
cost.  It does this by providing an interface to transcendent memory,
which is memory/storage that is not otherwise visible to and/or directly
addressable by the kernel.

Instead of being discarded, hooks in the reclaim code "put" clean
pages to cleancache.  Filesystems that "opt-in" may "get" pages
from cleancache that were previously put, but pages in cleancache are
"ephemeral", meaning they may disappear at any time. And the size
of cleancache is entirely dynamic and unknowable to the kernel.
Filesystems currently supported by this patchset include ext3, ext4,
btrfs, and ocfs2.  Other filesystems (especially those built entirely
on VFS) should be easy to add, but should first be thoroughly tested to
ensure coherency.

Details and a FAQ are provided in Documentation/vm/cleancache.txt

This first patch of eight in this cleancache series only adds two
new documentation files.

[v8: minor documentation changes by author]
[v3: akpm@linux-foundation.org: document sysfs API]
[v3: hch@infradead.org: move detailed description to Documentation/vm]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

Create a separate MAINTAINERS entry for jbd2

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Cifs has no problems with lingering references to unlinked directory
inodes.

CC: Steve French <sfrench@samba.org>
CC: linux-cifs@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Ocfs2 has no issues with lingering references to unlinked directory inodes.

CC: Mark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Exofs has no problems with lingering references to unlinked directory
inodes.

CC: Benny Halevy <bhalevy@panasas.com>
CC: osd-dev@open-osd.org
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

NFS has no problems with lingering references to unlinked directory
inodes.

CC: Trond Myklebust <Trond.Myklebust@netapp.com>
CC: linux-nfs@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext2 has no problems with lingering references to unlinked directory
inodes.

CC: Jan Kara <jack@suse.cz>
CC: linux-ext4@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext3 has no problems with lingering references to unlinked directory
inodes.

CC: Jan Kara <jack@suse.cz>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Andreas Dilger <adilger.kernel@dilger.ca>
CC: linux-ext4@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ext4 has no problems with lingering references to unlinked directory
inodes.

CC: "Theodore Ts'o" <tytso@mit.edu>
CC: Andreas Dilger <adilger.kernel@dilger.ca>
CC: linux-ext4@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Btrfs has no problems with lingering references to unlinked directory
inodes.

CC: Chris Mason <chris.mason@oracle.com>
CC: linux-btrfs@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Ceph does not need these, and they screw up our use of the dcache as a
consistent cache.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Simplify control flow to match vfs_rename_dir.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Simplify control flow through vfs_rename_dir.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Simplify the control flow with an out label.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vfs_rename_dir() doesn't properly account for filesystems with
FS_RENAME_DOES_D_MOVE.  If new_dentry has a target inode attached, it
unhashes the new_dentry prior to the rename() iop and rehashes it after,
but doesn't account for the possibility that rename() may have swapped
{old,new}_dentry.  For FS_RENAME_DOES_D_MOVE filesystems, it rehashes
new_dentry (now the old renamed-from name, which d_move() expected to go
away), such that a subsequent lookup will find it.  Currently all
FS_RENAME_DOES_D_MOVE filesystems compensate for this by failing in
d_revalidate.

The bug was introduced by: commit 349457cc
"[PATCH] Allow file systems to manually d_move() inside of ->rename()"

Fix by not rehashing the new dentry.  Rehashing used to be needed by
d_move() but isn't anymore.
Reported-by: Sage Weil <sage@newdream.net>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

There are no libfs issues with dangling references to empty directories.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The helper is now only called by file systems, not the VFS.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Only a few file systems need this.  Start by pushing it down into each
rename method (except gfs2 and xfs) so that it can be dealt with on a
per-fs basis.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Only a few file systems need this.  Start by pushing it down into each
fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs
basis.

This does not change behavior for any in-tree file systems.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This serves no useful purpose that I can discern.  All callers (rename,
rmdir) hold their own reference to the dentry.

A quick audit of all file systems showed no relevant checks on the value
of d_count in vfs_rmdir/vfs_rename_dir paths.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This presumes that there is no reason to unhash a dentry if we fail because
it is a mountpoint or the LSM check fails, and that the LSM checks do not
depend on the dentry being unhashed.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We should not allow file modification via mmap while the filesystem is
frozen. So block in block_page_mkwrite() while the filesystem is frozen.
We cannot do the blocking wait in __block_page_mkwrite() since e.g. ext4
will want to call that function with transaction started in some cases
and that would deadlock. But we can at least do the non-blocking reliable
check in __block_page_mkwrite() which is the hardest part anyway.

We have to check for frozen filesystem with the page marked dirty and under
page lock with which we then return from ->page_mkwrite(). Only that way we
cannot race with writeback done by freezing code - either we mark the page
dirty after the writeback has started, see freezing in progress and block, or
writeback will wait for our page lock which is released only when the fault is
done and then writeback will writeout and writeprotect the page again.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Create __block_page_mkwrite() helper which does all what block_page_mkwrite()
does except that it passes back errors from __block_write_begin /
block_commit_write calls.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>