- 19 Sep, 2009 40 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/dvb/pt1/pt1.c: In function ‘pt1_probe’: drivers/media/dvb/pt1/pt1.c:915: warning: ‘DMA_nnBIT_MASK’ is deprecated Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Huang Weiyi authored
Remove #include <linux/version.h> Cc: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Pete Eberlein authored
Use v4l2_info and v4l2_err where appropriate. Signed-off-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
-
Pete Eberlein authored
The brightness and contrast controls were added to the Sensoray 2250 device. A read register function was added to set the correct bit fields. Signed-off-by:
-
Pete Eberlein authored
In some error cases, allocated buffers need to be freed before returning. Signed-off-by:
-
Pete Eberlein authored
Implemented the vidio_g_std and vidio_querystd ioctls. Signed-off-by:
-
Pete Eberlein authored
The declarations for struct go7007_file *gofh and struct go7007 *go can be merged when gofh isn't used by the function. Signed-off-by:
-
Pete Eberlein authored
MPEG controls were disabled by Mauro's ioctl conversion patch. They are now re-enabled and cleaned up. Signed-off-by:
-
Pete Eberlein authored
Trailing whitespace is removed. Source lines wrap at 80 columns. Signed-off-by:
-
Pete Eberlein authored
Replace "weird device" with accurate descriptions. Add menu options and makefile lines for the i2c modules. Added comment about why dvb-usb is included. Added include sound/config.h for Ubuntu 8.04 distro kernel. Signed-off-by:
-
Richard Röjfors authored
This is an initial driver for Analog Devices ADV7180 Video Decoder. So far it only supports query standard. [akpm@linux-foundation.org: remove unneeded cast] Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Roel Kluin authored
Prevent NULL dereference if kzalloc() fails. Cc: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Roel Kluin authored
Prevent NULL dereference if kmalloc() fails. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Roel Kluin authored
Prevent NULL dereference if kmalloc() fails. Cc: Markus Rechberger <mrechberger@sundtek.de> Signed-off-by:
-
Roel Kluin authored
Prevent NULL dereference if kmalloc() fails. Signed-off-by:
-
Vladimir Geroy authored
Adding Compro VideoMate E800 (DVB-T part only) Cc: Steven Toth <stoth@linuxtv.org> Signed-off-by:
Vladimir Geroy <geroin22@yandex.ru> Signed-off-by:
-
Matti J. Aaltonen authored
Fixed two typos. Signed-off-by:
Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by:
Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by:
-
Julia Lawall authored
Move the kzalloc and associated test after the stream/query test, to avoid the need to free the allocated if the stream/query test fails. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dmitry Belimov authored
Change tuner type to correct for BeholdTV cards with FM1216MK5. Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
James Blanford authored
Due to rounding and clipping, exposure and gain settings do not map to unique register values. Rather than read the registers and report gain and exposure that may be different than the values that were set, just cache the latest values that were set and report them. Reduce exposure range from 0-65535 to 0-255 so libv4l's autogain doesn't take forever. Remove vestiges of driver signal processing that is now handled by libv4l. Signed-off-by:
James Blanford <jhblanford@gmail.com> Signed-off-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
James Blanford authored
Initialize image size before it's used to initialize exposure. Work around lack of exposure set hardware latch with a sequence of register writes in a single I2C command packet. Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Andreas Mohr authored
V4L/DVB (13003): Correct dangerous and inefficient msecs_to_jiffies() calculation in some V4L2 drivers Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Henk Vergonet authored
http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner test status analog (PAL-B): - Sometimes picture is noisy, but it becomes crystal clear after switching between channels. (happens for example at 687.25 Mhz) - On a lower frequency (511.25 Mhz) the picture is always sharp, but lacks colour. - No sound problems. - radio untested. Digital: - DVB-T/H stream reception works. - Would expect to see some more channels in the higher frequency region. Overall is the impression that sensitivity still needs improvement both in analog and digital modes. Signed-off-by:
Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
When fast push-pull button of remote control we can received incorrect key code 0x00. Key information from IR decoder has ID of remote control 2 bytes, byte of key code and byte of mirror key code. Correct data 0x86 0x6B 0x00 0xFF Wrong data 0x86 0x6B 0x00 0x00 This patch added additional test of mirror byte for filtering. Signed-off-by:
-
Akihiro Tsukada authored
This patch adds driver for 774 Friio White, ISDB-T USB receiver Friio White is an USB 2.0 ISDB-T receiver. (http://www.friio.com/) The device has a GL861 chip and a Comtech JDVBT90502 canned tuner module. This driver ignores all the frontend_parameters except frequency, as ISDB-T shares the same parameter configuration across the country and thus the device can work like an intelligent one. As this device does not include a CAM nor hardware descrambling feature, the driver passes through scrambled TS streams. There is Friio Black, a variant for ISDB-S, which shares the same USB Vendor/Product ID with White, but it is not supported in this driver. They should be identified in the initialization sequence, but this feature is not tested. Signed-off-by:
Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by:
-
Mauro Carvalho Chehab authored
Add a driver for Earthsoft PT1 Eearthsoft PT1 is a PCI card for Japanese broadcasting with two ISDB-S and ISDB-T demodulators. This card has neither MPEG decoder nor conditional access module onboard. It transmits only compressed and possibly encrypted MPEG data over the PCI bus, so you need an external software decoder and a decrypter to watch TV on your computer. This driver is originally developed by Tomoaki Ishikawa <tomy@users.sourceforge.jp> by reverse engineering. [mchehab@redhat.com: renamed isdb_ts to isdbs_ts to use the current standard] Signed-off-by:
HIRANO Takahito <hiranotaka@zng.info> Signed-off-by:
-
HIRANO Takahito authored
In ISDB-S, time-devision duplex is used to multiplexing several waves in the same frequency. Each wave is identified by its own transport stream ID, or TS ID. We need to provide some way to specify this ID from user applications to handle ISDB-S frontends. This code has been tested with the Earthsoft PT1 driver. [mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID] Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/gspca/gl860/gl860.c: In function ‘gl860_build_control_table’: drivers/media/video/gspca/gl860/gl860.c:119: warning: ‘sd_ctrls’ may be used uninitialized in this function Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/saa7164/saa7164-buffer.c: In function ‘saa7164_buffer_alloc’: drivers/media/video/saa7164/saa7164-buffer.c:110: warning: cast to pointer from integer of different size drivers/media/video/saa7164/saa7164-buffer.c:112: warning: cast to pointer from integer of different size Signed-off-by: -
Muralidharan Karicheri authored
Following changes done for vpif driver to support vpif capture:- 1) Current version of display driver defined vpif register space as part for vpif display platform driver resource This is not correct since vpif is common across capture and display drivers. So the resource iomap function is moved to this module 2) Since there are common registers, a spinlock is added for mutual exclusion. This has incorporated comments against version v0 of the patch series Resending to merge to V4L linux-next Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Muralidharan Karicheri authored
This is the vpif capture bridge driver for DM6467. This video supports two video channels each having a tvp5147 device at the input. This allows simultaneous capture of NTSC/PAL video in each of this channel. Both MMAP and USERPTR io mechanism are supported. Currently buffer allocation happens at REQBUF ioctl request. Since USERPTR IO is supported, this is not an issue since user applications can allocate buffers and pass the user space address to the driver. Following are TODOs :- 1) Adding support for allocation of buffers at init 2) VBI/HBI data service This has incorporated comments received against version v0 of the patch series. Resending to merge V4l linux-next create mode 100644 drivers/media/video/davinci/vpif_capture.c create mode 100644 drivers/media/video/davinci/vpif_capture.h Reviewed-by:
-
Muralidharan Karicheri authored
Adds Kconfig and Makefile changes required for vpif capture driver Resending to merge to V4L linux-next Reviewed-by:
-
Muralidharan Karicheri authored
The structure name for vpif display driver changed since it was not unique. So this update is done to reflect the same. Also removed the code related to register address space iomap. Uses v4l2_i2c_new_subdev_board() instead of v4l2_i2c_new_probed_subdev() so that platform data can be added for subdevice configuration for polarities. This has incorporated comments against version v0 of the patch series. Resending the original patch for merge to V4L linux-next Reviewed-by:
-
Hans Verkuil authored
Warn when the desired device node number is already in use, except when the new video_register_device_no_warn function is called since in some use-cases that warning is not relevant. Signed-off-by:
-
Hans Verkuil authored
There are some subtle differences in the way the devnode numbers are handled depending on whether the FIXED_MINOR_RANGES config option is set. Add some simple wrapper functions to handle that correctly. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
