The panic function will first print the panic message to the console,
then stop additional cpus with smp_send_stop and finally call the
function on the panic notifier list.
In case of an I/O based console the panic message will cause I/O to
be started and a function on the panic notifier list will wait for the
completion of the I/O. That does not work if an I/O completion interrupt
has already been delivered to a cpu that is then stopped by smp_send_stop.
To break this cyclic dependency add code to smp_send_stop that gives
the additional cpu the opportunity to complete outstanding interrupts.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Call generic IPC demultiplexer instead of having a nearly identical
s390 variant. Also make sure that native and compat handling now have
the same behaviour.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Return EINVAL instead of EFAULT for invalid input parameter.
Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix length checking of the expected reply and remove re-adjustment of
expected control block length.
Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Move the program interruption code and the translation exception identifier
to the pt_regs structure as 'int_code' and 'int_parm_long' and make the
first level interrupt handler in entry[64].S store the two values. That
makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct
and to reduce the number of arguments to a lot of functions. Finally
un-inline do_trap. Overall this saves 5812 bytes in the .text section of
the 64 bit kernel.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove last traces of our kerntypes patch which was always an addon
patch which never got upstream. Somehow a few bits got upstream
anyway.
Since kerntypes aren't used anymore and lcrash isn't maintained (for
s390 at least) remove the last traces of kerntypes that somehow went
upstream. Also remove the documentation that mentions lcrash.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Increase cpu topology change poll frequency if a change is anticipated.
Otherwise a user might be a bit confused to have to wait up to a minute
in order to see a change this should be visible immediatly.
However there is no guarantee that the change will happen during the
time frame the poll frequency is increased.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Another round of cleanup for entry[64].S, in particular the program check
handler looks more reasonable now. The code size for the 31 bit kernel
has been reduced by 616 byte and by 528 byte for the 64 bit version.
Even better the code is a bit faster as well.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Only add subdirectories of arch/s390 to kbuild if their respective
config option is selected.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

There is no reason for the cpu-measurement-facility host id constant to
reside in the lowcore where space is precious. Use an entry in the literal
pool in HANDLE_SIE_INTERCEPT and a stack slot in sie64a.
While we are at it replace the id -1 with 0 to indicate host execution.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Cleanup z10 topology handling. This adds some more code but hopefully
the result is more readable and easier to maintain.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch disables the check for MACHINE_IS_VM when initializing the
pfault infrastructure. The code checks for successful completion of
diag 258 anyway, thus it's safe to try initialization on LPAR anyway.
This is needed to use pfault on kvm
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

drivers/s390/cio/qdio_setup.c:24:32:
  warning: non-ANSI function declaration of function 'qdio_allocate_aob'

While at it also simplify the function.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove all ifdefs from topology code and also only compile it for the
CONFIG_SCHED_BOOK case. The new code selects SCHED_MC if SCHED_BOOK is
selected. SCHED_MC without SCHED_BOOK is not possible anymore.
Furthermore various sysfs attributes are not available anymore for the
!SCHED_BOOK case. In particular all attributes that correspond to
CPU polarization.
But since all real world kernels have SCHED_BOOK selected anyway this
doesn't matter too much.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Currently, when smp_switch_to_ipl_cpu() is done, the backchain in the dump
analysis tool crash looks like the following:

 #0 [1f746e70] __machine_kexec at 11dd92
 #1 [1f746eb8] smp_restart_cpu at 11820e
 #0 [00907eb0] cpu_idle at 10602e
 #1 [00907ef8] start_kernel at 979a08

It would be good to see the registers of the interrupted function.
To achieve this, the backchain on the new stack has to be set to zero.
This looks then like the following:

 #0 [1f746e70] __machine_kexec at 11dd8e
 #1 [1f746eb8] smp_restart_cpu at 11820a
 PSW:  0706000180000000 00000000005c6fe6 (vtime_stop_cpu+134)
 GPRS: 0000000000000000 00000000005c6fe6 0000000001ad0228 0000000001ad0248
       0000000000907f08 0000000001ad0b40 0000000000979344 0000000000000000
       00000000009c0000 00000000009c0010 00000000009ab024 0000000001ad0200
       0000000001ad0238 00000000005cc9d8 000000000010602e 0000000000907e68
 #0 [00907eb0] cpu_idle at 10602e
 #1 [00907ef8] start_kernel at 979a08

In addition to this, now also the correct PSW is stored in the pt_regs
structure that is located at the start of the panic stack.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The kernel address space of a 64 bit kernel currently uses a three level
page table and the vmemmap array has a fixed address and a fixed maximum
size. A three level page table is good enough for systems with less than
3.8TB of memory, for bigger systems four page table levels need to be
used. Each page table level costs a bit of performance, use 3 levels for
normal systems and 4 levels only for the really big systems.
To avoid bloating sparse.o too much set MAX_PHYSMEM_BITS to 46 for a
maximum of 64TB of memory.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch makes the create_mem_hole() function more readable and
fixes some minor bugs (e.g. off-by-one problems).
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

commit cc772456
    [S390] fix list corruption in gmap reverse mapping

added a potential dead lock:

BUG: sleeping function called from invalid context at mm/page_alloc.c:2260
in_atomic(): 1, irqs_disabled(): 0, pid: 1108, name: qemu-system-s39
3 locks held by qemu-system-s39/1108:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<000003e004866542>] kvm_set_memory_region+0x3a/0x6c [kvm]
 #1:  (&mm->mmap_sem){++++++}, at: [<0000000000123790>] gmap_map_segment+0x9c/0x298
 #2:  (&(&mm->page_table_lock)->rlock){+.+.+.}, at: [<00000000001237a8>] gmap_map_segment+0xb4/0x298
CPU: 0 Not tainted 3.1.3 #45
Process qemu-system-s39 (pid: 1108, task: 00000004f8b3cb30, ksp: 00000004fd5978d0)
00000004fd5979a0 00000004fd597920 0000000000000002 0000000000000000
       00000004fd5979c0 00000004fd597938 00000004fd597938 0000000000617e96
       0000000000000000 00000004f8b3cf58 0000000000000000 0000000000000000
       000000000000000d 000000000000000c 00000004fd597988 0000000000000000
       0000000000000000 0000000000100a18 00000004fd597920 00000004fd597960
Call Trace:
([<0000000000100926>] show_trace+0xee/0x144)
 [<0000000000131f3a>] __might_sleep+0x12a/0x158
 [<0000000000217fb4>] __alloc_pages_nodemask+0x224/0xadc
 [<0000000000123086>] gmap_alloc_table+0x46/0x114
 [<000000000012395c>] gmap_map_segment+0x268/0x298
 [<000003e00486b014>] kvm_arch_commit_memory_region+0x44/0x6c [kvm]
 [<000003e004866414>] __kvm_set_memory_region+0x3b0/0x4a4 [kvm]
 [<000003e004866554>] kvm_set_memory_region+0x4c/0x6c [kvm]
 [<000003e004867c7a>] kvm_vm_ioctl+0x14a/0x314 [kvm]
 [<0000000000292100>] do_vfs_ioctl+0x94/0x588
 [<0000000000292688>] SyS_ioctl+0x94/0xac
 [<000000000061e124>] sysc_noemu+0x22/0x28
 [<000003fffcd5e7ca>] 0x3fffcd5e7ca
3 locks held by qemu-system-s39/1108:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<000003e004866542>] kvm_set_memory_region+0x3a/0x6c [kvm]
 #1:  (&mm->mmap_sem){++++++}, at: [<0000000000123790>] gmap_map_segment+0x9c/0x298
 #2:  (&(&mm->page_table_lock)->rlock){+.+.+.}, at: [<00000000001237a8>] gmap_map_segment+0xb4/0x298

Fix this by freeing the lock on the alloc path. This is ok, since the
gmap table is never freed until we call gmap_free, so the table we are
walking cannot go.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The current code in setup_boot_command_line() uses a heuristic to
detect an EBCDIC command line. It checks if any of the bytes in
the command line has bit one (0x80) set. In that case it is assumed
that we have an EBCDIC string and the complete command line is
converted.

On s390 there are cases where the boot loader provides a kernel
command line that is NULL terminated, but has random data after
the NULL termination. In that case, setup_boot_command_line()
might misinterpret an ASCII string for an EBCDIC string. A
subsequent string conversion can then damage the ASCII string.

This patch solves the problem by checking for NULL termination.
If no EBCDIC character has been found until the the NULL
termination has been found, we now assume that we have an ASCII
string.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Mask the extint_code parameter of the smp external interrupt handler
to get the interruption code. Otherwise emergency call interrupts
erroneously might be accounted as emergency signal interrupts.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

RC6 fails again.

> I found my system freeze mostly during starting up X and KDE. Sometimes it
> works for some minutes, sometimes it freezes immediatly. When the freeze
> happens, everything is dead (even the reset button does not work, I need to
> power cycle).

> I disabled RC6, and my system runs wonderfully.

> The system is a Z68 Pro board with Sandybridge i5-2500K processor, 8
> GB of RAM and UEFI firmware.
Reported-by: Kai Krakow <hurikhan77@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Semaphores still cause problems on some machines:

> From Udo Steinberg:
>
> With Linux-3.2-rc6 I'm frequently seeing GPU hangs when large amounts of
> text scroll in an xterm, such as when extracting a tar archive. Such as this
> one (note the timestamps):
>
>  I can reproduce it fairly easily with something
>  as simple as:
>
>	  while true; do dmesg; done

This patch turns them off on SNB while leaving them on for IVB.
Reported-by: Udo Steinberg <udo@hypervisor.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eugeni Dodonov <eugeni@dodonov.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: e500: include linux/export.h
  KVM: PPC: fix kvmppc_start_thread() for CONFIG_SMP=N
  KVM: PPC: protect use of kvmppc_h_pr
  KVM: PPC: move compute_tlbie_rb to book3s_64 common header
  KVM: Don't automatically expose the TSC deadline timer in cpuid
  KVM: Device assignment permission checks
  KVM: Remove ability to assign a device without iommu support
  KVM: x86: Prevent starting PIT timers in the absence of irqchip support

post 3.2-rc7 pull request

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  MAINTAINERS: firewire git URL update

Bruce Fields notes that commit 778fc546 ("locks: fix tracking of
inprogress lease breaks") introduced a possible error pointer
dereference on failure to allocate memory.  locks_conflict() will
dereference the passed-in new lease lock structure that may be an error pointer.

This means an open (without O_NONBLOCK set) on a file with a lease
applied (generally only done when Samba or nfsd (with v4) is running)
could crash if a kmalloc() fails.

So instead of playing games with IS_ERROR() all over the place, just
check the allocation failure early.  That makes the code more
straightforward, and avoids this possible bad pointer dereference.
Based-on-patch-by: J. Bruce Fields <bfields@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is required for THIS_MODULE.  We recently stopped acquiring
it via some other header.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Currently kvmppc_start_thread() tries to wake other SMT threads via
xics_wake_cpu().  Unfortunately xics_wake_cpu only exists when
CONFIG_SMP=Y so when compiling with CONFIG_SMP=N we get:

  arch/powerpc/kvm/built-in.o: In function `.kvmppc_start_thread':
  book3s_hv.c:(.text+0xa1e0): undefined reference to `.xics_wake_cpu'

The following should be fine since kvmppc_start_thread() shouldn't
called to start non-zero threads when SMP=N since threads_per_core=1.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

kvmppc_h_pr is only available if CONFIG_KVM_BOOK3S_64_PR.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

compute_tlbie_rb is only used on ppc64 and cannot be compiled on ppc32.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Unlike all of the other cpuid bits, the TSC deadline timer bit is set
unconditionally, regardless of what userspace wants.

This is broken in several ways:
 - if userspace doesn't use KVM_CREATE_IRQCHIP, and doesn't emulate the TSC
   deadline timer feature, a guest that uses the feature will break
 - live migration to older host kernels that don't support the TSC deadline
   timer will cause the feature to be pulled from under the guest's feet;
   breaking it
 - guests that are broken wrt the feature will fail.

Fix by not enabling the feature automatically; instead report it to userspace.
Because the feature depends on KVM_CREATE_IRQCHIP, which we cannot guarantee
will be called, we expose it via a KVM_CAP_TSC_DEADLINE_TIMER and not
KVM_GET_SUPPORTED_CPUID.

Fixes the Illumos guest kernel, which uses the TSC deadline timer feature.

[avi: add the KVM_CAP + documentation]
Reported-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Only allow KVM device assignment to attach to devices which:

 - Are not bridges
 - Have BAR resources (assume others are special devices)
 - The user has permissions to use

Assigning a bridge is a configuration error, it's not supported, and
typically doesn't result in the behavior the user is expecting anyway.
Devices without BAR resources are typically chipset components that
also don't have host drivers.  We don't want users to hold such devices
captive or cause system problems by fencing them off into an iommu
domain.  We determine "permission to use" by testing whether the user
has access to the PCI sysfs resource files.  By default a normal user
will not have access to these files, so it provides a good indication
that an administration agent has granted the user access to the device.

[Yang Bai: add missing #include]
[avi: fix comment style]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yang Bai <hamo.by@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This option has no users and it exposes a security hole that we
can allow devices to be assigned without iommu protection.  Make
KVM_DEV_ASSIGN_ENABLE_IOMMU a mandatory option.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

User space may create the PIT and forgets about setting up the irqchips.
In that case, firing PIT IRQs will crash the host:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
IP: [<ffffffffa10f6280>] kvm_set_irq+0x30/0x170 [kvm]
...
Call Trace:
 [<ffffffffa11228c1>] pit_do_work+0x51/0xd0 [kvm]
 [<ffffffff81071431>] process_one_work+0x111/0x4d0
 [<ffffffff81071bb2>] worker_thread+0x152/0x340
 [<ffffffff81075c8e>] kthread+0x7e/0x90
 [<ffffffff815a4474>] kernel_thread_helper+0x4/0x10

Prevent this by checking the irqchip mode before starting a timer. We
can't deny creating the PIT if the irqchips aren't set up yet as
current user land expects this order to work.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  vmwgfx: fix incorrect VRAM size check in vmw_kms_fb_create()
  drm/radeon/kms: bail on BTC parts if MC ucode is missing

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Fix race between CPU hotplug and lglocks

for linus: writeback reason binary tracing format fix

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: show writeback reason with __print_symbolic

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: adapt update-po-config to new UML layout