Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

The help text refers to AMD instead of Broadcom, presumably because it
was copied from the former.

Fixes: adfc5217 ("broadcom: Move the Broadcom drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

The help text refers to IBM instead of Apple, presumably because it was
copied from the former.

Fixes: 8fb6b090 ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

The help text refers to Western Digital instead of National
Semiconductor 8390, presumably because it was copied from the former.

Fixes: 644570b8 ("8390: Move the 8390 related drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

mvpp2 uses a delayed workqueue to gather traffic statistics.
On module removal the workqueue can be destroyed before calling
cancel_delayed_work_sync() on its works.
Fix it by moving the destroy_workqueue() call after mvpp2_port_remove().
Also remove an unneeded call to flush_workqueue()

    # rmmod mvpp2
    [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full
    [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down
    [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full
    [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down
    [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full
    [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down
    [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
    [ 2744.115615] Mem abort info:
    [ 2744.115616]   ESR = 0x96000005
    [ 2744.115617]   Exception class = DABT (current EL), IL = 32 bits
    [ 2744.115618]   SET = 0, FnV = 0
    [ 2744.115619]   EA = 0, S1PTW = 0
    [ 2744.115620] Data abort info:
    [ 2744.115621]   ISV = 0, ISS = 0x00000005
    [ 2744.115622]   CM = 0, WnR = 0
    [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000
    [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000
    [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP
    [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2]
    [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1
    [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink]
    [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO)
    [ 2744.115675] pc : __queue_work+0x9c/0x4d8
    [ 2744.115677] lr : __queue_work+0x170/0x4d8
    [ 2744.115678] sp : ffffff801001bd50
    [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600
    [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018
    [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004
    [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017
    [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8
    [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000
    [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000
    [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff
    [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967
    [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040
    [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0
    [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000
    [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000
    [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000
    [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000
    [ 2744.115714] Call trace:
    [ 2744.115716]  __queue_work+0x9c/0x4d8
    [ 2744.115718]  delayed_work_timer_fn+0x28/0x38
    [ 2744.115722]  call_timer_fn+0x3c/0x180
    [ 2744.115723]  expire_timers+0x60/0x168
    [ 2744.115724]  run_timer_softirq+0xbc/0x1e8
    [ 2744.115727]  __do_softirq+0x128/0x320
    [ 2744.115731]  irq_exit+0xa4/0xc0
    [ 2744.115734]  __handle_domain_irq+0x70/0xc0
    [ 2744.115735]  gic_handle_irq+0x58/0xa8
    [ 2744.115737]  el1_irq+0xb8/0x140
    [ 2744.115738]  console_unlock+0x3a0/0x568
    [ 2744.115740]  vprintk_emit+0x200/0x2a0
    [ 2744.115744]  dev_vprintk_emit+0x1c8/0x1e4
    [ 2744.115747]  dev_printk_emit+0x6c/0x7c
    [ 2744.115751]  __netdev_printk+0x104/0x1d8
    [ 2744.115752]  netdev_printk+0x60/0x70
    [ 2744.115756]  phylink_resolve+0x38c/0x3c8 [phylink]
    [ 2744.115758]  process_one_work+0x1f8/0x448
    [ 2744.115760]  worker_thread+0x54/0x500
    [ 2744.115762]  kthread+0x12c/0x130
    [ 2744.115764]  ret_from_fork+0x10/0x1c
    [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261)

Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This variant of netif_napi_add() should be used from drivers
using NAPI to exclusively poll a TX queue.
Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When permanent entries were introduced by the commit below, they were
exempt from timing out and thus igmp leave wouldn't affect them unless
fast leave was enabled on the port which was added before permanent
entries existed. It shouldn't matter if fast leave is enabled or not
if the user added a permanent entry it shouldn't be deleted on igmp
leave.

Before:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

< join and leave 229.1.1.1 on eth4 >

$ bridge mdb show
$

After:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

< join and leave 229.1.1.1 on eth4 >

$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent

Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed()

In phy_led_trigger_change_speed(), there is an if statement on line 48
to check whether phy->last_triggered is NULL:
    if (!phy->last_triggered)

When phy->last_triggered is NULL, it is used on line 52:
    led_trigger_event(&phy->last_triggered->trigger, LED_OFF);

Thus, a possible null-pointer dereference may occur.

To fix this bug, led_trigger_event(&phy->last_triggered->trigger,
LED_OFF) is called when phy->last_triggered is not NULL.

This bug is found by a static analysis tool STCheck written by
the OSLAB group in Tsinghua University.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.

Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb3 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since linux 4.9 it is not possible to use buffers on the stack for DMA transfers.

During usb probe the driver crashes with "transfer buffer is on stack" message.

This fix k-allocates a buffer to be used on "read_reg_atomic", which is a macro
that calls "usb_control_msg" under the hood.

Kernel 4.19 backtrace:

usb_hcd_submit_urb+0x3e5/0x900
? sched_clock+0x9/0x10
? log_store+0x203/0x270
? get_random_u32+0x6f/0x90
? cache_alloc_refill+0x784/0x8a0
usb_submit_urb+0x3b4/0x550
usb_start_wait_urb+0x4e/0xd0
usb_control_msg+0xb8/0x120
hfcsusb_probe+0x6bc/0xb40 [hfcsusb]
usb_probe_interface+0xc2/0x260
really_probe+0x176/0x280
driver_probe_device+0x49/0x130
__driver_attach+0xa9/0xb0
? driver_probe_device+0x130/0x130
bus_for_each_dev+0x5a/0x90
driver_attach+0x14/0x20
? driver_probe_device+0x130/0x130
bus_add_driver+0x157/0x1e0
driver_register+0x51/0xe0
usb_register_driver+0x5d/0x120
? 0xf81ed000
hfcsusb_drv_init+0x17/0x1000 [hfcsusb]
do_one_initcall+0x44/0x190
? free_unref_page_commit+0x6a/0xd0
do_init_module+0x46/0x1c0
load_module+0x1dc1/0x2400
sys_init_module+0xed/0x120
do_fast_syscall_32+0x7a/0x200
entry_SYSENTER_32+0x6b/0xbe
Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is
no need for individual driver config symbols to duplicate this
dependency.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just a few fixes:
 * revert NETIF_F_LLTX usage as it caused problems
 * avoid warning on WMM parameters from AP that are too short
 * fix possible null-ptr dereference in hwsim
 * fix interface combinations with 4-addr and crypto control
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) memleak in ebtables from the error path for the 32/64 compat layer,
   from Florian Westphal.

2) Fix inverted meta ifname/ifidx matching when no interface is set
   on either from the input/output path, from Phil Sutter.

3) Remove goto label in nft_meta_bridge, also from Phil.

4) Missing include guard in xt_connlabel, from Masahiro Yamada.

5) Two patch to fix ipset destination MAC matching coming from
   Stephano Brivio, via Jozsef Kadlecsik.

6) Fix set rename and listing concurrency problem, from Shijie Luo.
   Patch also coming via Jozsef Kadlecsik.

7) ebtables 32/64 compat missing base chain policy in rule count,
   from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough.
The 'kcalloc()' just a few lines above, already uses GFP_KERNEL.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no good reason to use GFP_ATOMIC here. Other memory allocations
are performed with GFP_KERNEL (see other 'dma_alloc_coherent()' below and
'kzalloc()' in 'et131x_rx_dma_memory_alloc()')

Use GFP_KERNEL which should be enough.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 6e43650c ("add maintainer for network drop monitor kernel service")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Two small fixes

Patch #1 from Jiri fixes the error path of the module initialization
function. Found during manual code inspection.

Patch #2 from Petr further reduces the default shared buffer pool sizes
in order to work around a problem that was originally described in
commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on
Spectrum-2").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on
Spectrum-2"), pool size was reduced to mitigate a problem in port buffer
usage of ports split four ways. It turns out that this work around does not
solve the issue, and a further reduction is required.

Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the
whole number of cells.

Fixes: e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of sp2 pci driver registration fail, fix the error path to
start with sp1 pci driver unregister.

Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set phy device advertising to enable MAC flow control.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.

Guillaume Nault adds:

  And the implementation was broken until 2016 (see 29e73269 ("pppoe:
  fix reference counting in PPPoE proxy")), and nobody ever noticed. I
  should probably have removed this ioctl entirely instead of fixing it.
  Clearly, it has never been used.

Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.

All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.

This should apply to all stable kernels.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Our test suite somtimes provokes the following crash:

Description of problem:
[ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
[ 1092.605072] PGD 0 P4D 0
[ 1092.607620] Oops: 0000 [#1] SMP PTI
[ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1
[ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018
[ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc]
[ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7
[ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282
[ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045
[ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000
[ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a
[ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000
[ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a
[ 1092.692614] FS:  0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000
[ 1092.700702] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0
[ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1092.727843] PKRU: 55555554
[ 1092.730556] Call Trace:
[ 1092.733010]  <IRQ>
[ 1092.735034]  tipc_sk_filter_rcv+0x7ca/0xb80 [tipc]
[ 1092.739828]  ? __kmalloc_node_track_caller+0x1cb/0x290
[ 1092.744974]  ? dev_hard_start_xmit+0xa5/0x210
[ 1092.749332]  tipc_sk_rcv+0x389/0x640 [tipc]
[ 1092.753519]  tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc]
[ 1092.758224]  tipc_rcv+0x57a/0xf20 [tipc]
[ 1092.762154]  ? ktime_get_real_ts64+0x40/0xe0
[ 1092.766432]  ? tpacket_rcv+0x50/0x9f0
[ 1092.770098]  tipc_l2_rcv_msg+0x4a/0x70 [tipc]
[ 1092.774452]  __netif_receive_skb_core+0xb62/0xbd0
[ 1092.779164]  ? enqueue_entity+0xf6/0x630
[ 1092.783084]  ? kmem_cache_alloc+0x158/0x1c0
[ 1092.787272]  ? __build_skb+0x25/0xd0
[ 1092.790849]  netif_receive_skb_internal+0x42/0xf0
[ 1092.795557]  napi_gro_receive+0xba/0xe0
[ 1092.799417]  mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core]
[ 1092.804564]  mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core]
[ 1092.809536]  mlx5e_napi_poll+0xb2/0xce0 [mlx5_core]
[ 1092.814415]  ? __wake_up_common_lock+0x89/0xc0
[ 1092.818861]  net_rx_action+0x149/0x3b0
[ 1092.822616]  __do_softirq+0xe3/0x30a
[ 1092.826193]  irq_exit+0x100/0x110
[ 1092.829512]  do_IRQ+0x85/0xd0
[ 1092.832483]  common_interrupt+0xf/0xf
[ 1092.836147]  </IRQ>
[ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0
[ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f
[ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f
[ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000
[ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940
[ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78
[ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000
[ 1092.905196]  ? cpuidle_enter_state+0x92/0x2a0
[ 1092.909555]  do_idle+0x236/0x280
[ 1092.912785]  cpu_startup_entry+0x6f/0x80
[ 1092.916715]  start_secondary+0x1a7/0x200
[ 1092.920642]  secondary_startup_64+0xb7/0xc0
[...]

The reason is that the skb list tipc_socket::mc_method.deferredq only
is initialized for connectionless sockets, while nothing stops arriving
multicast messages from being filtered by connection oriented sockets,
with subsequent access to the said list.

We fix this by initializing the list unconditionally at socket creation.
This eliminates the crash, while the message still is dropped further
down in tipc_sk_filter_rcv() as it should be.
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
Here are a couple of fixes for rxrpc:

 (1) Fix a potential deadlock in the peer keepalive dispatcher.

 (2) Fix a missing notification when a UDP sendmsg error occurs in rxrpc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If PHYLIB is not set, build enetc will fails:

drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open':
enetc.c: undefined reference to `phy_disconnect'
enetc.c: undefined reference to `phy_start'
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close':
enetc.c: undefined reference to `phy_stop'
enetc.c: undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_get_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_set_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_mdio.o: In function `enetc_mdio_probe':
enetc_mdio.c: undefined reference to `mdiobus_alloc_size'
enetc_mdio.c: undefined reference to `mdiobus_free'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With recent changes that introduced support for Page Pool in stmmac, Jon
reported that NFS boot was no longer working on an ARM64 based platform
that had the IP behind an IOMMU.

As Page Pool API does not guarantee DMA syncing because of the use of
DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon
re-allocation because we are always re-using same pages.

In fact, ARM64 code invalidates the DMA area upon two situations [1]:
	- sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE
	- sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE

So, as we must invalidate both the current RX buffer and the newly allocated
buffer we propose this fix.

[1] arch/arm64/mm/cache.S
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently are duplicated checks on orig_egr_types which are
redundant, I believe this is a typo and should actually be
orig_ing_types || orig_egr_types instead of the expression
orig_egr_types || orig_egr_types.  Fix these.

Addresses-Coverity: ("Same on both sides")
Fixes: c6b36bdd ("mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using the define here makes the code more expressive.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is perfectly ok to not have an gpio attached to the fixed-link node. So
the driver should not throw an error message when the gpio is missing.

Fixes: 5468e82f ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()")
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the fact that a notification isn't sent to the recvmsg side to indicate
a call failed when sendmsg() fails to transmit a DATA packet with the error
ENETUNREACH, EHOSTUNREACH or ECONNREFUSED.

Without this notification, the afs client just sits there waiting for the
call to complete in some manner (which it's not now going to do), which
also pins the rxrpc call in place.

This can be seen if the client has a scope-level IPv6 address, but not a
global-level IPv6 address, and we try and transmit an operation to a
server's IPv6 address.

Looking in /proc/net/rxrpc/calls shows completed calls just sat there with
an abort code of RX_USER_ABORT and an error code of -ENETUNREACH.

Fixes: c54e43d7 ("rxrpc: Fix missing start of call timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby
rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces
the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which
the tries to take the already held lock.

Fix this by providing a version of rxrpc_put_peer() that can be called in
situations where the lock is already held.

The bug may produce the following lockdep report:

============================================
WARNING: possible recursive locking detected
5.2.0-next-20190718 #41 Not tainted
--------------------------------------------
kworker/0:3/21678 is trying to acquire lock:
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
__rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435

but task is already holding lock:
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430

Fixes: 330bdcfa ("rxrpc: Fix the keepalive generator [ver #2]")
Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

Revert this for now, it has been reported multiple times that it
completely breaks connectivity on various devices.

Cc: stable@vger.kernel.org
Fixes: 8dbb000e ("mac80211: set NETIF_F_LLTX when using intermediate tx queues")
Reported-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Peter Lebbing <peter@digitalbrains.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Jozsef Kadlecsik says:

====================
ipset patches for the nf tree

- When the support of destination MAC addresses for hash:mac sets was
  introduced, it was forgotten to add the same functionality to hash:ip,mac
  types of sets. The patch from Stefano Brivio adds the missing part.
- When the support of destination MAC addresses for hash:mac sets was
  introduced, a copy&paste error was made in the code of the hash:ip,mac
  and bitmap:ip,mac types: the MAC address in these set types is in
  the second position and not in the first one. Stefano Brivio's patch
  fixes the issue.
- There was still a not properly handled concurrency handling issue
  between renaming and listing sets at the same time, reported by
  Shijie Luo.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ebtables doesn't include the base chain policies in the rule count,
so we need to add them manually when we call into the x_tables core
to allocate space for the comapt offset table.

This lead syzbot to trigger:
WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649
xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649

Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com
Fixes: 2035f3ff ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_phy_detect’:
drivers/net/ethernet/smsc/smc911x.c:677:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (cfg & HW_CFG_EXT_PHY_DET_) {
       ^
drivers/net/ethernet/smsc/smc911x.c:715:3: note: here
   default:
   ^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: i386):

drivers/net/hamradio/baycom_epp.c: In function ‘transmit’:
drivers/net/hamradio/baycom_epp.c:491:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (i) {
       ^
drivers/net/hamradio/baycom_epp.c:504:3: note: here
   default:  /* fall through */
   ^~~~~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: i386):

drivers/net/wan/sdla.c: In function ‘sdla_errors’:
drivers/net/wan/sdla.c:414:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (cmd == SDLA_INFORMATION_WRITE)
       ^
drivers/net/wan/sdla.c:417:3: note: here
   default:
   ^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IS_ERR() already calls unlikely(), so this extra unlikely() call
around IS_ERR() is not needed.
Signed-off-by: Enrico Weigelt <info@metux.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spectrum systems have a configurable limit on how far into the packet they
parse. By default, the limit is 96 bytes.

An IPv6 PTP packet is layered as Ethernet/IPv6/UDP (14+40+8 bytes), and
sequence ID of a PTP event is only available 32 bytes into payload, for a
total of 94 bytes. When an additional 802.1q header is present as
well (such as when ptp4l is running on a VLAN port), the parsing limit is
exceeded. Such packets are not recognized as PTP, and are not timestamped.

Therefore generalize the current VXLAN-specific parsing depth setting to
allow reference-counted requests from other modules as well. Keep it in the
VXLAN module, because the MPRS register also configures UDP destination
port number used for VXLAN, and is thus closely tied to the VXLAN code
anyway.

Then invoke the new interfaces from both VXLAN (in obvious places), as well
as from PTP code, when the (global) timestamping configuration changes from
disabled to enabled or vice versa.

Fixes: 87486427 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>