It is stored in the board specific file
  ./arch/arm/mach-s3c2412/mach-jive.c
as .rgb_if2.

Actually, the value is correct, only semantic is wrong.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Use platform_device_register_simple() and also fix error
handling when platform_device_alloc() fails (cr_backlight_driver
is left registered).
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Use platform_device_register_simple() and also fix error
handling when platform_device_alloc() fails (progearbl_driver
is left registered).
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

Use platform_device_register_simple() and also fix error
handling when platform_device_alloc() fails (hp680_bl_driver
is left registered).
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Work around branch tracer warning.
  sparc64: Fix unsigned long long warnings in drivers.
  sparc64: Use unsigned long long for u64.
  sparc: refactor code in fault_32.c
  sparc64: refactor code in init_64.c
  sparc64: refactor code in viohs.c
  sparc: make proces_ver_nack a bit more readable

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (10191a): Update MAINTAINERS entries on media drivers
  V4L/DVB (10190): cx88: Fix some Kbuild troubles
  V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y
  V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc
  V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
  V4L/DVB (10181): v4l2-device: Fix some sparse warnings
  V4L/DVB (10180): drivers/media: Fix a number of sparse warnings
  V4L/DVB (10179): tda8290: Fix two sparse warnings
  V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols
  V4L/DVB (10177): Fix sparse warnings on em28xx
  V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions
  V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage

* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: (67 commits)
  nfsd: get rid of NFSD_VERSION
  nfsd: last_byte_offset
  nfsd: delete wrong file comment from nfsd/nfs4xdr.c
  nfsd: git rid of nfs4_cb_null_ops declaration
  nfsd: dprint each op status in nfsd4_proc_compound
  nfsd: add etoosmall to nfserrno
  NFSD: FIDs need to take precedence over UUIDs
  SUNRPC: The sunrpc server code should not be used by out-of-tree modules
  svc: Clean up deferred requests on transport destruction
  nfsd: fix double-locks of directory mutex
  svc: Move kfree of deferral record to common code
  CRED: Fix NFSD regression
  NLM: Clean up flow of control in make_socks() function
  NLM: Refactor make_socks() function
  nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT
  SUNRPC: Ensure the server closes sockets in a timely fashion
  NFSD: Add documenting comments for nfsctl interface
  NFSD: Replace open-coded integer with macro
  NFSD: Fix a handful of coding style issues in write_filehandle()
  NFSD: clean up failover sysctl function naming
  ...

As reported by Sam Ravnborg, Gcc-3.4.5 does not handle:

	if (get_user() || get_user())

with the new branch tracer enabled.

Just seperate it out into seperate statements for now
so people can get work done.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the MAINTAINERS entries for the media drivers.

We are doing a few changes during 2009 to improve patch handling for
drivers/media stuff.

Currently, v4l-dvb-maintainer list at linuxtv.org were used to to be v4l/dvb
driver maintainers ML, in order to keep track of patch merge requests and to
receive bug fixes. This list allows posting for everybody, but, in order to
avoid spam, the user subscribe/unsubscribe at the ML is moderated. Other
development discussions and end-user forums happened on two separated ML (one
for V4L and another for DVB).

At the beginning of 2009, we've created linux-media@vger.kernel.org, meaning to
be the main upstream development mailing list for drivers/media, including V4L
and DVB core and drivers.

The choice for vger.kernel.org were due to the fact that most of upstream lists
are there. Also, its anti-spam filtering rules are better than what we
currently have at linuxtv.org.

For now, both video4linux-list and linux-dvb ML will remain active, but more
focused on end users. It is expected that those lists will gradually be
replaced also by linux-media@vger.kernel.org.

This patch reflect those changes at linux MAINTAINERS file.

Since the development and bug fix discussions will now happen at
linux-media@vger.kernel.org, this patch does the following changes

	- replaces v4l-dvb-maintainer ML for the new
	  linux-media@vger.kernel.org;

	- replaces video4linux ML for the new linux-media@vger.kernel.org;

While here, it also:

	- Fixes the existing -git tree entries for drivers/media (since the
          repository name changed);

	- Adds the missing drivers/media -git tree entry on a few maintainers
          entries that don't point to a tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

As Randy Dunlap <randy.dunlap@oracle.com> reported, cx88 has some compilation issues:

drivers/built-in.o: In function `cx88_call_i2c_clients':
(.text+0x20af17): undefined reference to `videobuf_dvb_get_frontend'
drivers/built-in.o: In function `cx8802_probe':
cx88-mpeg.c:(.devinit.text+0x268c4): undefined reference to `videobuf_dvb_alloc_frontend'
cx88-mpeg.c:(.devinit.text+0x268ea): undefined reference to `videobuf_dvb_dealloc_frontends'

With those configs:

CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=m
CONFIG_DVB_CORE=m

After carefully examining the code, with the current code, several cx88 drivers
(cx8800, cx8802, cx88_dvb and cx88_blackbird) should be compiled as a module,
if one of them is marked as such. Just fixing Kconfig could create a very complex
set of rules. Also, this hides a problem with the current approach where the dvb
functionality weren't confined inside dvb module.

What happens is that:
	- cx88-i2c (part of cx8800) has some special rules if DVB;
	- cx88-mpeg (cx8802 module) has also part of DVB init code;
	- cx88-dvb has the rest of the dvb code;
	- cx88-blackbird can be used with cx88-mpeg, having cx88-dvb or not.

So, instead of doing some tricks at Kconfig and wait for a next breakage,
this patch moves the dvb code inside cx88-i2c and cx88-mpeg into cx88-dvb.

Another problem is that cx8802 were being compiled, even without cx88-dvb
and cx88-blackbird modules.

While on this code, let's fix also a reported problem:
http://www.linuxtv.org/pipermail/linux-dvb/2009-January/031225.html

A solution for the issue were proposed here:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg00021.html

Thanks to Randy, Andy, Gregoire and Thomas for helping us to detect
and solve the issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

As reported by Randy Dunlap <randy.dunlap@oracle.com>:

With CONFIG_INPUT=m and CONFIG_DVB_DM1105=y:

drivers/built-in.o: In function `input_sync':
dm1105.c:(.text+0x120c33): undefined reference to `input_event'
drivers/built-in.o: In function `dm1105_emit_key':
dm1105.c:(.text+0x120c6c): undefined reference to `input_event'
dm1105.c:(.text+0x120c82): undefined reference to `input_event'
dm1105.c:(.text+0x120cb2): undefined reference to `input_event'
dm1105.c:(.text+0x120cd1): undefined reference to `input_event'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xd8ae): undefined reference to `input_allocate_device'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xd9f6): undefined reference to `input_register_device'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xda09): undefined reference to `input_free_device'
drivers/built-in.o: In function `dm1105_ir_exit':
(.devexit.text+0xcde): undefined reference to `input_unregister_device'

This is due to the lack of a dependency between dm1105 and CONFIG_INPUT

Cc: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch extends 13417982 by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Don't call tda8290_init_tuner unless we have either a TDA8275 or TDA8275A
present. Calling this function will cause a TDA18271 to get sick, so we
should only call it when needed.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

/home/v4l/master/v4l/v4l2-device.c:32:2: warning: Using plain integer as NULL pointer
/home/v4l/master/v4l/v4l2-device.c:64:2: warning: Using plain integer as NULL pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static?
cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static?
stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static?
stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static?
stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static?
stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static?
stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static?
budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static?
/home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static?
/home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

/home/v4l/master/v4l/tda8290.c:233:7: warning: symbol 'i' shadows an earlier one
/home/v4l/master/v4l/tda8290.c:178:3: warning: symbol 'fm_mode' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

/home/v4l/master/v4l/dvb_frontend.c:838:19: warning: symbol 'dtv_cmds' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1035:6: warning: symbol 'dtv_property_dump' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1066:5: warning: symbol 'is_legacy_delivery_system' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1080:6: warning: symbol 'dtv_property_cache_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1132:6: warning: symbol 'dtv_property_legacy_params_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1187:6: warning: symbol 'dtv_property_adv_params_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1222:6: warning: symbol 'dtv_property_cache_submit' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1253:5: warning: symbol 'dtv_property_process_get' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1362:5: warning: symbol 'dtv_property_process_set' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

/home/v4l/master/v4l/em28xx-core.c:396:25: warning: symbol 'outputs' was not declared. Should it be static?
/home/v4l/master/v4l/em28xx-input.c:324:6: warning: symbol 'em28xx_ir_start' was not declared. Should it be static?
/home/v4l/master/v4l/em28xx-cards.c:1925:5: warning: symbol 'em28xx_init_dev' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1. now pxa_camera.c uses ioremap() for register access, pxa_camera.h is
   totally useless. Remove it.

2. <asm/dma.h> does no longer include <mach/dma.h>, include the latter
   file explicitly

 delete mode 100644 drivers/media/video/pxa_camera.h
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Not all architectures provide clear_user_page(), but clear_user_highpage()
is available everywhere at least via the compatibility inline function.

Is this the "trivial patch" that's required for these two drivers?
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix possible recursive rq->lock

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (98 commits)
  PCI PM: Put PM callbacks in the order of execution
  PCI PM: Run default PM callbacks for all devices using new framework
  PCI PM: Register power state of devices during initialization
  PCI PM: Call pci_fixup_device from legacy routines
  PCI PM: Rearrange code in pci-driver.c
  PCI PM: Avoid touching devices behind bridges in unknown state
  PCI PM: Move pci_has_legacy_pm_support
  PCI PM: Power-manage devices without drivers during suspend-resume
  PCI PM: Add suspend counterpart of pci_reenable_device
  PCI PM: Fix poweroff and restore callbacks
  PCI: Use msleep instead of cpu_relax during ASPM link retraining
  PCI: PCIe portdrv: Add kerneldoc comments to remining core funtions
  PCI: PCIe portdrv: Rearrange code so that related things are together
  PCI: PCIe portdrv: Fix suspend and resume of PCI Express port services
  PCI: PCIe portdrv: Add kerneldoc comments to some core functions
  x86/PCI: Do not use interrupt links for devices using MSI-X
  net: sfc: Use pci_clear_master() to disable bus mastering
  PCI: Add pci_clear_master() as opposite of pci_set_master()
  PCI hotplug: remove redundant test in cpq hotplug
  PCI: pciehp: cleanup register and field definitions
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits)
  wimax/i2400m: add CREDITS and MAINTAINERS entries
  wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install
  i2400m: Makefile and Kconfig
  i2400m/SDIO: TX and RX path backends
  i2400m/SDIO: firmware upload backend
  i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends
  i2400m/SDIO: header for the SDIO subdriver
  i2400m/USB: TX and RX path backends
  i2400m/USB: firmware upload backend
  i2400m/USB: probe/disconnect, dev init/shutdown and reset backends
  i2400m/USB: header for the USB bus driver
  i2400m: debugfs controls
  i2400m: various functions for device management
  i2400m: RX and TX data/control paths
  i2400m: firmware loading and bootrom initialization
  i2400m: linkage to the networking stack
  i2400m: Generic probe/disconnect, reset and message passing
  i2400m: host/device procotol and core driver definitions
  i2400m: documentation and instructions for usage
  wimax: Makefile, Kconfig and docbook linkage for the stack
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async:
  async: don't do the initcall stuff post boot
  bootchart: improve output based on Dave Jones' feedback
  async: make the final inode deletion an asynchronous event
  fastboot: Make libata initialization even more async
  fastboot: make the libata port scan asynchronous
  fastboot: make scsi probes asynchronous
  async: Asynchronous function calls to speed up kernel boot

Due to changeset ba84be23 ("remove
linux/hardirq.h from asm-generic/local.h") the sparc64 build started
failing on drivers/base/topology.c:

  drivers/base/topology.c: In function ‘show_physical_package_id’:
  drivers/base/topology.c:103: error: implicit declaration of function ‘cpu_data’
  drivers/base/topology.c:103: error: request for member ‘proc_id’ in something not a structure or union
  drivers/base/topology.c: In function ‘show_core_id’:
  drivers/base/topology.c:106: error: request for member ‘core_id’ in something not a structure or union

Adding the obvious fix of including asm/cpudata.h into asm/topology.h on
sparc64 doesn't fix it, in fact it makes things worse because of the
header file dependency chain:

	linux/gfp.h --> linux/mmzone.h --> linux/topology.h -->
	asm/topology.h --> asm/cpudata.h --> linux/percpu.h -->
	linux/slab.h

which results in:

  include/linux/slub_def.h: In function ‘kmalloc_large’:
  include/linux/slub_def.h:209: error: implicit declaration of function ‘__get_free_pages’
  include/linux/slub_def.h:209: error: ‘__GFP_COMP’ undeclared (first use in this function)
  include/linux/slub_def.h:209: error: (Each undeclared identifier is reported only once
  include/linux/slub_def.h:209: error: for each function it appears in.)
  include/linux/slub_def.h:209: warning: cast to pointer from integer of different size

The simplest thing to do is to add yet another one-off hack like parts
of the guilty changeset did, by putting an explicit linux/hardirq.h
include into drivers/base/topology.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

refactor the nfs4 server lock code to use last_byte_offset
to compute the last byte covered by the lock.  Check for overflow
so that the last byte is set to NFS4_MAX_UINT64 if offset + len
wraps around.

Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

A race between svc_revisit and svc_delete_xprt can result in
deferred requests holding references on a transport that can never be
recovered because dead transports are not enqueued for subsequent
processing.

Check for XPT_DEAD in revisit to clean up completing deferrals on a dead
transport and sweep a transport's deferred queue to do the same for queued
but unprocessed deferrals.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
  kbuild: add a symlink to the source for separate objdirs
  kconfig: add script to manipulate .config files on the command line
  kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
  bootchart: improve output based on Dave Jones' feedback
  fix modules_install via NFS
  qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types

The text always mentions ...bin.o_shipped, just the example makefiles
actually use ...bin_shipped. It was corrected in one place some time
ago, these ones seem to have been forgotten.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

I have some scripts which need to map back to the source directory
from an objdir. This was so far done by parsing the Makefile,
but the Makefile format changes occasionally and breaks my scripts
then.

To make this more reliable add a "source" symlink back.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

I often change single options in .config files. Instead of using
an editor or one of the frontends it's convenient to do this from
the command line. It's also useful to do from automated build scripts
when building different variants from a base config file.

I extracted most of the CONFIG manipulation code from one of my
build scripts into a new shell script scripts/config

The script is not integrated with the normal Kconfig machinery
and doesn't do any checking against Kconfig files, but just manipulates
that text format. This is always done at make time anyways.

I believe this script would be a useful standard addition for scripts/*

Sample usage:

./scripts/config --disable smp
Disable SMP in .config file

./scripts/config --file otherdir/.config --module e1000e
Enable E1000E as module in otherdir/.config

./scripts/config --state smp
y
Check state of config option CONFIG_SMP

After merging into git please make scripts/config executable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>