- 18 May, 2010 40 commits
-
-
Olimpiu Pascariu authored
>From 9473816c446a6ca91905fc49a73732f70b5223b4 Mon Sep 17 00:00:00 2001 This is a patch to the cx25821-alsa.c file that fixes up errors and warnings found by the checkpatch.pl tool [mchehab@redhat.com: a few adjustments on the comments to improve readability] Signed-off-by:
Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in drivers/media/video/tlg2300/pd-main.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Julia Lawall authored
In quickcam_messenger.c, if the NULL test on uvd is needed, then the dereference should be after the NULL test. In vpif_display.c, std_info is initialized to the address of a structure field. This seems unlikely to be NULL. Test std_info->stdid instead. In saa7134-alsa.c, the function is only called from one place, where the chip argument has already been dereferenced. On the other hand, if it should be kept, then card should be initialized after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Andy Walls authored
Get rid of the magic number 0x28c0 used in several places in the ivtv and ivtvfb driver and define the register address to a meaningful name. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Ian Armstrong authored
Changing the decoder video standard just prior to, or during, the output of the lower field may result in a hard system lock. To avoid this, try to ensure the firmware call occurs only during the first 100 lines of the top field. (Minor comment addition and a line break added Andy Walls <awalls@radix.net>.) Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
-
Andy Walls authored
This is a guess at the proper configuration for component video on the Leadtek PVR2100 and DVR3100 H. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Jean Delvare authored
Some variants of the ASUS TV-FM 7135 are handled as the ASUSTeK P7131 Analog (card=146). However, by the time we find out, some card-specific initialization is missed. In particular, the fact that the IR is GPIO-based. Set it when we change the card type, and run saa7134_input_init1(). Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Yet another naming replace magic thanks to perl scripts. This time, it is done with: cat tm6000-regs.h |perl -ne 'if (m/(TM6010_REQ[^\s]+)\s+0x([a-f0-9]+)\, 0x([a-f0-9]+)/) { $name="$1"; $req=$2; $val=$3; printf "s/REQ_${req}_SET_GET_USBREG, 0x[0]*$3,/$1,/\n" }' >a; for i in tm*.c; do sed -f a $i >b && mv b $i; done Signed-off-by: -
Mauro Carvalho Chehab authored
Yet another script magic. This time, the change were generated by this script: cat tm6000-regs.h |perl -ne 'if (m/^(\#define TM6010_REQ)(05)([^\s]+)(\s+)0x([A-F0-9].)/) { \ $name="$1$2$3"; $sp=$4; $req=$2; $val=$5; $val=~tr/A-F/a-f/; \ printf "$name%s0x%s, 0x%s\n", $sp, $req, $val; } else { print $_ }' \ >a; mv a tm6000-regs.h Signed-off-by: -
Mauro Carvalho Chehab authored
After looking at the "magic" registers, it is clear that usb registers belong to request 5. Replace them with this script: cat /tmp/reg3 |perl -ne 'if (m/define (TM6000_U_)([^\s]+)\s+0x([A-F0-9].)/) { \ $name=$2; $val=$3; printf "s,$1$2,TM6010_REQ05_R%s_%s,g\n", $val, $name; }' >a; sed -f a tm6000-regs.h >b; mv b tm6000-regs.h Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of using magic pairs of req/reg, replace them by the defined values. This patch were generated by the following script: cat tm6000-regs.h |perl -ne 'if (m/(TM6010_REQ[^\s]+)\s+0x([a-f0-9]+)\, 0x([a-f0-9]+)/) { $name="$1"; $req=$2; $val=$3; printf "s/REQ_${req}_SET_GET_AVREG[_BIT]*, 0x[0]*$3,/$1,/\n" }' >a; for i in tm*.c; do sed -f a $i >b && mv b $i; done Signed-off-by: -
Mauro Carvalho Chehab authored
Use a pair Req/Reg for all registers at req07 and req08 groups. This makes easier to replace them at the code with a script and helps to avoid using the wrong req with some register. This change were generated by this script: if (m/^(\#define TM6010_REQ)([0-9].)([^\s]+)(\s+)0x([A-F0-9].)/) { $name="$1$2$3"; $sp=$4; $req=$2; $val=$5; $val=~tr/A-F/a-f/; printf "$name%s0x%s, 0x%s\n", $sp, $req, $val; } else { print $_ } Signed-off-by: -
Mauro Carvalho Chehab authored
According with the original patch that added the register names, those are related to tm6010, so name it properly as such. Also, clearly indicates when a register belongs to Request 0x08 and add its register value at the name. This makes easier to double check if the proper register is used along the driver. This patch were made with the help of this simple perl script, applied over the definitions of the last register groups: if (m/define (TM6000_)([^\s]+)\s+0x([A-F0-9].)/) { $name=$2; $val=$3; printf "s,$1$2,TM6010_REQ08_R%s_%s,g\n", $val, $name; } And were manually adjusted to fix a few minor issues. Signed-off-by: -
Mauro Carvalho Chehab authored
According with the original patch that added the register names, those are related to tm6010, so name it properly as such. Also, clearly indicates when a register belongs to Request 0x07 and add its register value at the name. This makes easier to double check if the proper register is used along the driver. This patch were made with the help of this simple perl script: if (m/define (TM6000_)([^\s]+)\s+0x([A-F0-9].)/) { $name=$2; $val=$3; printf "s,$1$2,TM6010_REQ07_R%s_%s,g\n", $val, $name; } And were manually adjusted to fix a few minor issues. Signed-off-by: -
Michael Krufky authored
Some DVB USB devices use a separate endpoint for responses to control messages sent with bulk transfers via the generic_bulk_ctrl_endpoint. When generic_bulk_ctrl_endpoint_response is set, it will be used instead of the generic_bulk_ctrl_endpoint when reading usb responses in the dvb_usb_generic_rw helper function. Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Reviewed-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Now, both driver and keytable names are exported to userspace. This will help userspace to decide when a table need to be replaced by another one. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Change the ir-sysfs approach to create irrcv0 as a device, instead of using class_dev. Also, change the way input is registered, in order to make its parent to be the irrcv device. Due to this change, now the event device is created under /sys/class/ir/irrcv class: /sys/class/irrcv/irrcv0/ |-- current_protocol |-- device -> ../../../1-3 |-- input9 | |-- capabilities | | |-- abs ... Signed-off-by: -
Stefan Ringel authored
-add Hauppauge WinTV HVR 900H/WinTV USB2-Stick vid/pid 0x2040/6601 0x2040/6610 0x2040/6611 -add Terratec Cinergy Hybrid-Stick vid/pid 0x0ccd/0x00a5 -add Twinhan TU501(704D1) vid/pid 0x13d3/0x3240 0x13d3/0x3241 0x13d3/0x3243 0x13d3/0x3264 Signed-off-by:
Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Max Thrun authored
Signed-off-by:
Max Thrun <bear24rw@gmail.com> Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Mosalam Ebrahimi authored
Note that setting this options to 50Hz can reduce the framerate, so it is still disabled (60Hz) by default. Signed-off-by:
Mosalam Ebrahimi <m.ebrahimi@ieee.org> Signed-off-by:
-
Antonio Ospite authored
* Indent with tabs, not with spaces, nor with mixed style. * Less indentation for controls index comments. * Use lowercase hex digits. Signed-off-by:
-
Max Thrun authored
Also set default values unconditionally, for readability. Signed-off-by:
-
Max Thrun authored
* Adjust comments for sharpness control * Set default value unconditionally, for readability Signed-off-by:
-
Max Thrun authored
Set only the needed bits for AWB, and enable it by default. Signed-off-by:
-
Antonio Ospite authored
Document that even if the state is a u8 value, both MSB and LSB are set as sd->exposure represents half of the value we are going to set into registers. Skip setting exposure when AEC is enabled. Signed-off-by:
-
Max Thrun authored
This also makes manual exposure actually work: it never worked before because AEC was always enabled. Signed-off-by:
-
Max Thrun authored
* Use 'agc' instead of 'autogain' in the code so to align the naming as in AEC/AWB. * Tweak brightness and contrast default values. * Fix setting/resetting registers values for AGC. * Set actual gain back when disabling AGC. * Skip setting GAIN register when AGC is enabled. * Enable AGC by default. Note that as Auto Gain Control is now enabled by default, if you are using the driver for visual computing applications you might need to disable it explicitly in your software. Signed-off-by: -
Antonio Ospite authored
Hue control doesn't work and the sensor datasheet is not clear about how to set hue properly. Signed-off-by:
-
Max Thrun authored
Remove Blue/Red Channel Target Value, they are meant for Black Level Calibration but it is not completely clear how to use them. Signed-off-by:
-
Oliver Endriss authored
Add support for - Linux4Media cineS2 DVB-S2 Twin Tuner (v5) - Mystique SaTiX-S2 Dual (v2) Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Julia Lawall authored
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Andreas Regel authored
V4L/DVB: Budget/STV090x/STV6110x: Initialize the demodulator immediately after the tuner is attached Signed-off-by:
Andreas Regel <andreas.regel@gmx.de> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
Manu Abraham authored
Oliver Endriss <o.endriss@gmx.de> pointed out: Imho not a good idea, as the frontend thread calls - fe->ops.tuner_ops.init - fe->ops.tuner_ops.sleep If you remove fe->ops.i2c_gate_ctrl, init and sleep will fail, because gate_ctrl was never called... -- Signed-off-by:
Manu Abraham <manu@gmail.com> Signed-off-by:
-
Manu Abraham authored
- Remove a redundant exported gate control function Signed-off-by:
-
