A mistake was made in the identification of the four variants of the
System76 Gazelle (gaze14). This patch corrects the PCI ID of the
17-inch, GTX 1660 Ti variant from 0x8560 to 0x8551. This patch also
adds the correct fixups for the 15-inch and 17-inch GTX 1650 variants
with PCI IDs 0x8560 and 0x8561.

Tests were done on all four variants ensuring full audio capability.

Fixes: 80a5052d ("ALSA: hdea/realtek - Headset fixup for System76 Gazelle (gaze14)")
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Realtek codec driver applied the COEF setups to change the EAPD
control to the default mode (i.e. control by EPAD verbs) at the init
callback.  It works, but this is too excessive at the same time, since
it's called at each runtime PM resume.  That is, the initialization
should be done only once after the probe.  One may think that moving
this to the probe should be OK, but no -- there is a catch; when a
system resumes from S4 (hibernation), we need to re-initialize this
again manually, because it's out of regcache restoration.

This patch addresses the issue by introducing alc_pre_init() function
that performs such a task.  This is called from each codec probe
function, and it's called from the resume callback conditionally only
from S4 resume.
Reported-and-tested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Dell platform with ALC298.
system enter to runtime suspend. Headphone had noise.
Let Headset Mic not shutup will solve this issue.

[ Fixed minor coding style issues by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.2

A bunch of driver specific fixes that came in since the initial pull
request for v5.2, mainly warning fixes for the newly added Sound Open
Firmware code which people appeared to only start looking at after I'd
sent the pull request.

The recent fix for the build fix caused a couple of unused variable
compiler warnings when CONFIG_SND_SOC_SOF_NOCODEC isn't set:
  sound/soc/sof/core.c:263:6: warning: unused variable ‘ret’ [-Wunused-variable]
  sound/soc/sof/core.c:262:28: warning: unused variable ‘machine’ [-Wunused-variable]

Fix them by adding another ifdef.

Fixes: ce38a750 ("ASoC: SOF: core: fix undefined nocodec reference")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The line6 toneport driver has code for some delayed initialization,
and this hits the kernel Oops because mutex and other sleepable
functions are used in the timer callback.  Fix the abuse by a delayed
work instead so that everything works gracefully.

Reported-by: syzbot+a07d0142e74fdd595cfb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The build of aica sound driver has been broken since the timer API
conversion and some code rewrite.  This patch fixes the breakage by
using the common substream field, as well as a bit cleaning up wrt the
timer handling in the code.

Fixes: d522bb6a ("ALSA: sh: aica: Convert timers to use timer_setup()")
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove hp_pin = 0 return. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc256_init() and alc256_shutup() must run delay when headset jack
was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.

[ NOTE: this is a quite quite similar change for ALC295 by commit
  d3ba58bb ("ALSA: hda/realtek - Support low power consumption for
  ALC295"), but applied to ALC256 codec instead -- tiwai ]

Fixes: 8983eb60 ("ALSA: hda/realtek - Move to ACT_INIT state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.2

A bunch of driver specific fixes that came in since the initial pull
request for v5.2, mainly warning fixes for the newly added Sound Open
Firmware code which people appeared to only start looking at after I'd
sent the pull request.

- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Some userspace apps, like pulseaudio, may call open, hw_params,
prepare to judge whether the pcm is ready or not. Current hdac_hdmi
will return -ENODEV if monitor is not connected, which will cause
the apps believe the pcm is not ready. Actually PCM for hdmi is ready,
even the monitor is not connected.

This patch removes the check of monitor presence in hw_params, just like
what the legacy HD-Audio driver does.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

mt6358_amic_disable() resets PGA to 0.

Save the gain settings from mixer control and restore them when using
the microphone.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Output volume settings from mixer controls would be lost.

Imagine that "Headphone Volume" has set to -10dB via amixer:
- in mtk_hp_enable()
  - hp_store_gain() saves the volume setting -10dB from regmap_read()
    to ana_gain[AUDIO_ANALOG_VOLUME_HPOUTL]
  - headset_volume_ramp() ramps up from -10dB to -10dB
- in mtk_hp_disable()
  - headset_volume_ramp() ramps down from -10dB to -40dB

Next time in mtk_hp_enable(), hp_store_gain() would save -40dB but
not -10dB.  As a result, headset_volume_ramp() would ramp from -10dB to
-40dB (which is mute).
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Mt6358 ramps up from the smallest volume (i.e. -10dB) to target dB when
opening and ramps down from target dB to mute (i.e. -40dB) when closing.
If target is equal to -10dB when opening, headset_volume_ramp() simply
leaves current setting (which may not be -10dB) unchanged.

Execute the loop at least once to initialize the setting to the
starting point (i.e. from).
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The existing code mistakenly uses IS_ENABLED in C code instead of as
in conditional compilation, leading to the following error:

ld: sound/soc/sof/core.o: in function `sof_machine_check':
sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup'

Fix by using #if !IS_ENABLED()
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF
Kconfig files but is still selected instead of the correct
SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff,
leading to the following errors.

ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference
to `sof_xtensa_arch_ops'
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This fixes a compile warning below by properly handling the error code
from sof_get_ctrl_copy_params():
  include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
  sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here

The function returns an error before setting sparams.pl_size, so it'd
assign an uninitialized value at a later point.

Fixes: 53e0c72d ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

On the System76 Gazelle (gaze14), there is a headset microphone input
attached to 0x1a that does not have a jack detect. In order to get it
working, the pin configuration needs to be set correctly, and the
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is
identical to the patch already applied for the System76 Darter Pro
(darp5).
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add PCI IDs for LP and H skews.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Enter to close more power control widgets at suspend.
Remove hp_pin check. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc225_init() and alc225_shutup() must run delay when headset
jack was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.

[ A few compile fixes by tiwai ]

Fixes: 8983eb60 ("ALSA: hda/realtek - Move to ACT_INIT state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Paper over a trivial case leading to an uninitialized variable compile
warning:
  sound/soc/rockchip/rockchip_pdm.c:179:3: warning: ‘clk_out’ may be used uninitialized in this function [-Wmaybe-uninitialized]

Fixes: 624e8e00 ("ASoC: rockchip: pdm: fixup pdm fractional div")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

A trivial fix for the randconfig build error:
  sound/soc/sof/ops.c:20:6: warning: ‘ret’ is used uninitialized in this function [-Wuninitialized]

Fixes: d1d95fcb ("ASoC: SOF: Add DSP HW abstraction operations")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

A trivial fix for the randconfig build error:
  sound/soc/codecs/da7219.c:2366:6: warning: unused variable ‘i’ [-Wunused-variable]

Fixes: d90ba6c8 ("ASoC: da7219: Expose BCLK and WCLK control through CCF")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix kconfig warning for unmet dependency for IOSF_MBI when
PCI is not set/enabled.  Fixes this warning:

WARNING: unmet direct dependencies detected for IOSF_MBI
  Depends on [n]: PCI [=n]
  Selected by [y]:
  - SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Change trace level to debug to avoid spurious messages.
Return quietly when accessing iec958 control, while no
S/PDIF signal is available.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The max98090 driver defines 3 DAPM muxes; one for the right line output
(LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
and one for the right headphone mixer source (MIXHPRSEL Mux). The same
bit is used for the mux as well as the DAPM enable, and although the mux
can be correctly configured, after playback has completed, the mux will
be reset during the disable phase. This is preventing the state of these
muxes from being saved and restored correctly on system reboot. Fix this
by marking these muxes as SND_SOC_NOPM.

Note this has been verified this on the Tegra124 Nyan Big which features
the MAX98090 codec.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The current algorithm allows 3 types of transfers, 16bit, 32bit and
burst. According to Realtek, 16bit transfers have a special restriction
in that it is restricted to the memory region of
0x18020000 ~ 0x18021000. This region is the memory location of the I2C
registers. The current algorithm does not uphold this restriction and
therefore fails to complete writes.

Since this has been broken for some time it likely no one is using it.
Better to simply disable the 16 bit writes. This will allow users to
properly load firmware over SPI without data corruption.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

On the machines with AMD GPU or Nvidia GPU, we often meet this issue:
after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting
even there is no any monitors plugged.

When this problem happens, we check the /proc/asound/cardX/eld#N.M, we
will find the monitor_present=1, eld_valid=0.

The root cause is BIOS or GPU driver makes the PRESENCE valid even no
monitor plugged, and of course the driver will not get the valid
eld_data subsequently.

In this situation, we should not report the jack_plugged event, to do
so, let us change the function hdmi_present_sense_via_verbs(). In this
function, it reads the pin_sense via snd_hda_pin_sense(), after
calling this function, the jack_dirty is 0, and before exiting
via_verbs(), we change the shadow pin_sense according to both
monitor_present and eld_valid, then in the snd_hda_jack_report_sync(),
since the jack_dirty is still 0, it will report jack event according
to this modified shadow pin_sense.

After this change, the driver will not report Jack_is_plugged event
through hdmi_present_sense_via_verbs() if monitor_present is 1 and
eld_valid is 0.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The driver will check the monitor presence when resuming from suspend,
starting poll or interrupt triggers. In these 3 situations, the
jack_dirty will be set to 1 first, then the hda_jack.c reads the
pin_sense from register, after reading the register, the jack_dirty
will be set to 0. But hdmi_repoll_work() is enabled in these 3
situations, It will read the pin_sense a couple of times subsequently,
since the jack_dirty is 0 now, It does not read the register anymore,
instead it uses the shadow pin_sense which is read at the first time.

It is meaningless to check the shadow pin_sense a couple of times,
we need to read the register to check the real plugging state, so
we set the jack_dirty to 1 in the hdmi_repoll_work().
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.2

This is a pretty huge set of changes, it's been a pretty active release
all round but the big thing with this release is the Sound Open Firmware
changes from Intel, providing another DSP framework for use with the
DSPs in their SoCs.  This one works with the firmware of the same name
which is free software (unlike the previous DSP firmwares and framework)
and there has been some interest in adoption by other systems already so
hopefully we will see adoption by other vendors in the future.

Other highlights include:

 - Support for MCLK/sample rate ratio setting in the generic cards.
 - Support for pin switches in the generic cards.
 - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
   McDermond.
 - New drivers for Freescale audio mixers, several Intel machines,
   several Mediatek machines, Meson G12A, Sound Open Firmware and
   Spreadtrum compressed audio and DMA devices.

For Spreadtrum audio platform driver, it need allocate a larger DMA buffer
dynamically to copy audio data between userspace and kernel space, but that
will increase the risk of memory allocation failure especially the system
is under heavy load situation.

To make sure the audio can work in this scenario, we usually reserve one
region of memory to be used as a shared pool of DMA buffers for the
platform component. So add of_reserved_mem_device_init_by_idx() function
to initialize the shared pool of DMA buffers to be used by the platform
component.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This function is called from load_guspatch() and the rate is specified
by the user.  If they accidentally selected zero then it would crash the
kernel.  I've just changed the zero to a one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull perf fixes from Ingo Molnar:
 "I'd like to apologize for this very late pull request: I was dithering
  through the week whether to send the fixes, and then yesterday Jiri's
  crash fix for a regression introduced in this cycle clearly marked
  perf/urgent as 'must merge now'.

  Most of the commits are tooling fixes, plus there's three kernel fixes
  via four commits:

    - race fix in the Intel PEBS code

    - fix an AUX bug and roll back a previous attempt

    - fix AMD family 17h generic HW cache-event perf counters

  The largest diffstat contribution comes from the AMD fix - a new event
  table is introduced, which is a fairly low risk change but has a large
  linecount"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix race in intel_pmu_disable_event()
  perf/x86/intel/pt: Remove software double buffering PMU capability
  perf/ring_buffer: Fix AUX software double buffering
  perf tools: Remove needless asm/unistd.h include fixing build in some places
  tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv
  tools build: Add -ldl to the disassembler-four-args feature test
  perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet
  perf cs-etm: Don't check cs_etm_queue::prev_packet validity
  perf report: Report OOM in status line in the GTK UI
  perf bench numa: Add define for RUSAGE_THREAD if not present
  tools lib traceevent: Change tag string for error
  perf annotate: Fix build on 32 bit for BPF annotation
  tools uapi x86: Sync vmx.h with the kernel
  perf bpf: Return value with unlocking in perf_env__find_btf()
  MAINTAINERS: Include vendor specific files under arch/*/events/*
  perf/x86/amd: Update generic hardware cache events for Family 17h

Pull scheduler fix from Ingo Molnar:
 "Fix a kobject memory leak in the cpufreq code"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cpufreq: Fix kobject memleak

Pull x86 fix from Ingo Molnar:
 "Disable function tracing during early SME setup to fix a boot crash on
  SME-enabled kernels running distro kernels (some of which have
  function tracing enabled)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/mem_encrypt: Disable all instrumentation for early SME setup