- 13 Mar, 2018 2 commits
-
-
Bart Van Assche authored
Avoid that building with W=1 causes the following warning to appear: drivers/infiniband/hw/hfi1/qp.c:484: warning: Cannot understand * on line 484 - I thought it was a doc line Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Doug Ledford authored
Merge tag 'mlx5-updates-2018-02-28-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next mlx5-updates-2018-02-28-2 (IPSec-2) This series follows our previous one to lay out the foundations for IPSec in user-space and extend current kernel netdev IPSec support. As noted in our previous pull request cover letter "mlx5-updates-2018-02-28-1 (IPSec-1)", the IPSec mechanism will be supported through our flow steering mechanism. Therefore, we need to change the initialization order. Furthermore, IPsec is also supported in both egress and ingress. Since our current flow steering is egress only, we add an empty (only implemented through FPGA steering ops) egress namespace to handle that case. We also implement the required flow steering callbacks and logic in our FPGA driver. We extend the FPGA support for ESN and modifying a xfrm too. Therefore, we add support for some new FPGA command interface that supports them. The other required bits are added too. The new features and requirements are advertised via cap bits. Last but not least, we revise our driver's accel_esp API. This API will be shared between our netdev and IB driver, so we need to have all the required functionality from both worlds. Regards, Aviad and Matan Signed-off-by:
-
- 08 Mar, 2018 10 commits
-
-
Steve Wise authored
Implement the RDMA nldev netlink interface for dumping detailed PD information. Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Steve Wise authored
Zero out the fields of the struct ib_pd for user mode pds so that users querying pds via nldev will not get garbage. For simplicity, use kzalloc() to allocate the mlx4_ib_pd struct. Signed-off-by:
-
Steve Wise authored
Implement the RDMA nldev netlink interface for dumping detailed MR information. Signed-off-by:
-
Steve Wise authored
Setting iova, length, and page_size allows this information to be seen via NLDEV netlink queries, which can aid in user rdma debugging. Signed-off-by:
-
Steve Wise authored
Some of the struct ib_mr fields weren't getting initialized. This was benign, but will cause problems when dumping the mr resource via nldev/restrack. Signed-off-by:
-
Steve Wise authored
Implement the RDMA nldev netlink interface for dumping detailed CQ information. Reviewed-by:
-
Steve Wise authored
Implement RDMA nldev netlink interface to get detailed CM_ID information. Because cm_id's are attached to rdma devices in various work queue contexts, the pid and task information at restrak_add() time is sometimes not useful. For example, an nvme/f host connection cm_id ends up being bound to a device in a work queue context and the resulting pid at attach time no longer exists after connection setup. So instead we mark all cm_id's created via the rdma_ucm as "user", and all others as "kernel". This required tweaking the restrack code a little. It also required wrapping some rdma_cm functions to allow passing the module name string. Signed-off-by:
-
Steve Wise authored
Move struct rdma_id_private to a new header cma_priv.h so the resource tracking services in core/nldev.c can read useful information about cm_ids. Signed-off-by:
-
Steve Wise authored
Create a common dumpit function that can be used by all common resource types. This reduces code replication and simplifies the code as we add more resource types. Signed-off-by:
-
Steve Wise authored
Simplify res_to_dev() to make it easier to read/maintain. Reviewed-by:
-
- 07 Mar, 2018 28 commits
-
-
Leon Romanovsky authored
The kernel compiled with CONFIG_REFCOUNT_FULL produces the following error. The reason to it that initial value of refcount_t is supposed to be more than 0, change it. [ 3.106634] ------------[ cut here ]------------ [ 3.107756] refcount_t: increment on 0; use-after-free. [ 3.109130] WARNING: CPU: 0 PID: 1 at lib/refcount.c:153 refcount_inc+0x27/0x30 [ 3.110085] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00028-gf683e04bdccc #137 [ 3.110085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 3.110085] RIP: 0010:refcount_inc+0x27/0x30 [ 3.110085] RSP: 0000:ffffaa620000fba0 EFLAGS: 00010286 [ 3.110085] RAX: 0000000000000000 RBX: ffff9a6d1a1821c8 RCX: ffffffff98a50f48 [ 3.110085] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000246 [ 3.110085] RBP: ffff9a6d1ac800a0 R08: 0000000000000289 R09: 000000000000000a [ 3.110085] R10: fffff03bc0682840 R11: ffffffff9949856d R12: ffff9a6d1b4a4000 [ 3.110085] R13: 0000000000000000 R14: ffff9a6d1a0a6c00 R15: ffffaa620000fc5c [ 3.110085] FS: 0000000000000000(0000) GS:ffff9a6d1fc00000(0000) knlGS:0000000000000000 [ 3.110085] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.110085] CR2: 0000000000000000 CR3: 000000000ba0a000 CR4: 00000000000006b0 [ 3.110085] Call Trace: [ 3.110085] mlx5_core_create_cq+0xde/0x250 [ 3.110085] ? __kmalloc+0x1ce/0x1e0 [ 3.110085] mlx5e_create_cq+0x15c/0x1e0 [ 3.110085] mlx5e_open_drop_rq+0xea/0x190 [ 3.110085] mlx5e_attach_netdev+0x53/0x140 [ 3.110085] mlx5e_attach+0x3d/0x60 [ 3.110085] mlx5e_add+0x11d/0x2f0 [ 3.110085] mlx5_add_device+0x77/0x170 [ 3.110085] mlx5_register_interface+0x74/0xc0 [ 3.110085] ? set_debug_rodata+0x11/0x11 [ 3.110085] init+0x67/0x72 [ 3.110085] ? mlx4_en_init_ptys2ethtool_map+0x346/0x346 [ 3.110085] do_one_initcall+0x98/0x147 [ 3.110085] ? set_debug_rodata+0x11/0x11 [ 3.110085] kernel_init_freeable+0x164/0x1e0 [ 3.110085] ? rest_init+0xb0/0xb0 [ 3.110085] kernel_init+0xa/0x100 [ 3.110085] ret_from_fork+0x35/0x40 [ 3.110085] Code: 00 00 00 00 e8 ab ff ff ff 84 c0 74 02 f3 c3 80 3d 3b c3 64 01 00 75 f5 48 c7 c7 68 0b 81 98 c6 05 2b c3 64 01 01 e8 79 d7 a3 ff <0f> ff c3 66 0f 1f 44 00 00 8b 06 83 f8 ff 74 39 31 c9 39 f8 89 [ 3.110085] ---[ end trace a0068e1c68438a74 ]--- Fixes: f105b45b ("net/mlx5: CQ hold/put API") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aviad Yehezkel authored
Currently ESN is not supported with IPSec device offload. This patch adds ESN support to IPsec device offload. Implementing new xfrm device operation to synchronize offloading device ESN with xfrm received SN. New QP command to update SA state at the following: ESN 1 ESN 2 ESN 3 |-----------*-----------|-----------*-----------|-----------* ^ ^ ^ ^ ^ ^ ^ - marks where QP command invoked to update the SA ESN state machine. | - marks the start of the ESN scope (0-2^32-1). At this point move SA ESN overlap bit to zero and increment ESN. * - marks the middle of the ESN scope (2^31). At this point move SA ESN overlap bit to one. Signed-off-by:Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by:
Yossef Efraim <yossefe@mellanox.com> Signed-off-by:
-
Aviad Yehezkel authored
New function for getting driver internal sa entry from xfrm state. All checks are done in one function. Signed-off-by:
-
Aviad Yehezkel authored
In order to add a context to the FPGA, we need to get both the software transform context (which includes the keys, etc) and the source/destination IPs (which are included in the steering rule). Therefore, we register new set of firmware like commands for the FPGA. Each time a rule is added, the steering core infrastructure calls the FPGA command layer. If the rule is intended for the FPGA, it combines the IPs information with the software transformation context and creates the respective hardware transform. Afterwards, it calls the standard steering command layer. Signed-off-by:
-
Aviad Yehezkel authored
The current code has one layer that executed FPGA commands and the Ethernet part directly used this code. Since downstream patches introduces support for IPSec in mlx5_ib, we need to provide some abstractions. This patch refactors the accel code into one layer that creates a software IPSec transformation and another one which creates the actual hardware context. The internal command implementation is now hidden in the FPGA core layer. The code also adds the ability to share FPGA hardware contexts. If two contexts are the same, only a reference count is taken. Signed-off-by:
-
Aviad Yehezkel authored
Currently our device requires additional metadata in packet to perform ipsec crypto offload. Signed-off-by:
-
Aviad Yehezkel authored
We will need that for ipsec verbs. Signed-off-by:
-
Aviad Yehezkel authored
This patch adds V2 command support. New fpga devices support extended features (udp encap, esn etc...), this features require new hardware sadb format therefore we have a new version of commands to manipulate it. Signed-off-by:
-
Yossi Kuperman authored
Current hardware decrypts and authenticates incoming ESP packets. Subsequently, the software extracts the nexthdr field, truncates the trailer and adjusts csum accordingly. With this patch and a capable device, the trailer is being removed by the hardware and the nexthdr field is conveyed via PET. This way we avoid both the need to access the trailer (cache miss) and to compute its relative checksum, which significantly improve the performance. Experiment shows that trailer removal improves the performance by 2Gbps, (netperf). Both forwarding and host-to-host configurations. Signed-off-by:
Yossi Kuperman <yossiku@mellanox.com> Signed-off-by:
-
Yossi Kuperman authored
The current code assume only SA QP commands. Refactor in order to pave the way for new QP commands: 1. Generic cmd response format. 2. SA cmd checks are in dedicated functions. 3. Aligned debug prints. Signed-off-by:
-
Saeed Mahameed authored
Fix build break of mlx5_accel_ipsec_device_caps is not defined when MLX5_ACCEL is not selected, use MLX5_IPSEC_DEV instead which handles such case. Signed-off-by:
-
Yishai Hadas authored
This struct is involved in the user API for mlx4 and should not be hidden inside a driver header file. Fixes: 09d208b2 ("IB/mlx4: Add report for RSS capabilities by vendor channel") Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Doug Ledford authored
Merge tag 'mlx5-updates-2018-02-28-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next mlx5-updates-2018-02-28-1 (IPSec-1) This series consists of some fixes and refactors for the mlx5 drivers, especially around the FPGA and flow steering. Most of them are trivial fixes and are the foundation of allowing IPSec acceleration from user-space. We use flow steering abstraction in order to accelerate IPSec packets. When a user creates a steering rule, [s]he states that we'll carry an encrypt/decrypt flow action (using a specific configuration) for every packet which conforms to a certain match. Since currently offloading these packets is done via FPGA, we'll add another set of flow steering ops. These ops will execute the required FPGA commands and then call the standard steering ops. In order to achieve this, we need that the commands will get all the required information. Therefore, we pass the fte object and embed the flow_action struct inside the fte. In addition, we add the shim layer that will later be used for alternating between the standard and the FPGA steering commands. Some fixes, like " net/mlx5e: Wait for FPGA command responses with a timeout" are very relevant for user-space applications, as these applications could be killed, but we still want to wait for the FPGA and update the kernel's database. Regards, Aviad and Matan Signed-off-by:
-
Zhu Yanjun authored
The function rxe_init_device_param always return 0. So the function type is changed to void. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Zhu Yanjun authored
In the function rxe_send, the variable rxe is not used in it. So it should be removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Zhu Yanjun authored
In send_atomic_ack function, it is not necessary to make a skb_clone. To gain better performance (high throughput and low latency), this skb_clone is removed. The following tests are made. server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512 The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server and client. This test runs for several hours. There is no memory leak and the whole system can work well. Based on the above network, the following tests are made. Server: ibv_rc_pingpong -d rxe0 -g 1 Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1 The test results on Server(10 tests are made). Before: Throughput is 137.07 Mbit/sec Latency is 517.76 usec/iter After: Throughput is 148.85 Mbit/sec Latency is 476.64 usec/iter The throughput is enhanced and the latency is reduced. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Add a parameter for configuring the port on which the ib_srpt driver listens for incoming RDMA/CM connections, namely /sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port. The default value for this parameter is 0 which means "do not listen for incoming RDMA/CM connections". Add RDMA/CM support to all code that handles connection state changes. Modify srpt_init_nodeacl() such that ACLs can be configured for IPv4 and IPv6 addresses. Note: incoming connection requests are only accepted for ports that have been enabled. See also the "if (!sport->enabled)" code in the connection request handler. See also the following configfs attribute: /sys/kernel/config/target/srpt/$port/$port/enable. Signed-off-by:
-
Aviad Yehezkel authored
Previously, deleting a flow steering entry only got the index. Since the FPGA implementation of FTE's deletion might need to dig inside the FTE itself, we would like to get the FTE's context. Changing the interface to pass the FTE context. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Boris Pismenny authored
Add helper functions that check if a protocol is part of a flow steering match criteria. Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
-
Matan Barak authored
fte objects contain the match value and action. Currently, extending the actions require in adding them both to the API and fs_fte. Signed-off-by:
-
Aviad Yehezkel authored
Currently, we don't support egress flow steering namespace in mlx5 flow steering core implementation. However, when we want to encrypt a packet, we model it as a flow steering rule in the egress path. To overcome this, we add an empty egress namespace to flow steering. This namespace is initialized only when ipsec support exists. In the future, this will grow to a full blown full steering implementation, resembling the ingress path. Signed-off-by:
-
Matan Barak authored
The shim layer allows each namespace to define possibly different functionality for add/delete/update commands. The shim layer introduced here, will be used to support flow steering with the FPGA. Signed-off-by:
-
Matan Barak authored
The has_tag member will indicate whether a tag action was specified in flow specification. A flow tag 0 = MLX5_FS_DEFAULT_FLOW_TAG is assumed a valid flow tag that is currently used by mlx5 RDMA driver, whereas in HW flow_tag = 0 means that the user doesn't care about flow_tag. HW always provide a flow_tag = 0 if all flow tags requested on a specific flow are 0. So we need a way (in the driver) to differentiate between a user really requesting flow_tag = 0 and a user who does not care, in order to be able to report conflicting flow tags on a specific flow. Signed-off-by:
-
Boris Pismenny authored
Group and pass all function arguments of parse_flow_attr call in one common struct mlx5_flow_act. This patch passes all the action arguments of parse_flow_attr in one common struct mlx5_flow_act. It allows us to scale the number of actions without adding new arguments to the function. Signed-off-by:
-
Matan Barak authored
Some flow steering namespace initialization (i.e. egress namespace) might depend on FPGA capabilities. Changing the initialization order such that the FPGA will be initialized before flow steering. Flow steering fs cmds initialization might depend on IPSec capabilities. Changing the initialization order such that the IPSec will be initialized before flow steering as well. Signed-off-by:
-
Aviad Yehezkel authored
This is already done by xfrm layer between state_dev_del callback to state_dev_free callback. Signed-off-by:
-
Aviad Yehezkel authored
We can't allocate with GFP_KERNEL inside spinlock. Actually ida_simple doesn't require spinlock so remove it. Fixes: 547eede0 ("net/mlx5e: IPSec, Innova IPSec offload infrastructure") Signed-off-by:
-
Aviad Yehezkel authored
Generally, FPGA IPSec commands must always complete. We want to wait for one minute for them to complete gracefully also when killing a process. Signed-off-by:
-
