- 12 Oct, 2017 29 commits
-
-
Wanpeng Li authored
SDM mentioned: "If either the “unrestricted guest†VM-execution control or the “mode-based execute control for EPT†VM- execution control is 1, the “enable EPT†VM-execution control must also be 1." However, we can still observe unrestricted_guest is Y after inserting the kvm-intel.ko w/ ept=N. It depends on later starts a guest in order that the function vmx_compute_secondary_exec_control() can be executed, then both the module parameter and exec control fields will be amended. This patch fixes it by amending module parameter immediately during vmcs data setup. Reviewed-by:
Jim Mattson <jmattson@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
- XCR0 is reset to 1 by RESET but not INIT - XSS is zeroed by both RESET and INIT - BNDCFGU, BND0-BND3, BNDCFGS, BNDSTATUS are zeroed by both RESET and INIT This patch does this according to SDM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
-
Radim Krčmář authored
Our routines look at tscdeadline and period when deciding state of a timer. The timer is disarmed when switching between TSC deadline and other modes, so we should set everything to disarmed state. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Reviewed-by:
-
Radim Krčmář authored
preemption timer only looks at tscdeadline and could inject already disarmed timer. Signed-off-by:
-
Radim Krčmář authored
0 should disable the timer, but start_hv_timer will recognize it as an expired timer instead. Signed-off-by:
-
Shakeel Butt authored
The kvm slabs can consume a significant amount of system memory and indeed in our production environment we have observed that a lot of machines are spending significant amount of memory that can not be left as system memory overhead. Also the allocations from these slabs can be triggered directly by user space applications which has access to kvm and thus a buggy application can leak such memory. So, these caches should be accounted to kmemcg. Signed-off-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
-
David Hildenbrand authored
Let's just name these according to the SDM. This should make it clearer that the are used to enable exiting and not the feature itself. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
David Hildenbrand authored
Changing it afterwards doesn't make too much sense and will only result in inconsistencies. Reviewed-by:
-
David Hildenbrand authored
Setting it to 0 leads to setting it to the default value, let's document this. Reviewed-by:
-
David Hildenbrand authored
No need for another enable_ept check. kvm->arch.ept_identity_map_addr only has to be inititalized once. Having alloc_identity_pagetable() is overkill and dropping BUG_ONs is always nice. Reviewed-by:
-
David Hildenbrand authored
They are inititally 0, so no need to reset them to 0. Signed-off-by:
-
David Hildenbrand authored
vcpu->cpu is not cleared when doing a vmx_vcpu_put/load, so this can be dropped. Reviewed-by:
-
David Hildenbrand authored
Reviewed-by:
-
David Hildenbrand authored
Without this, we won't be able to do any flushes, so let's just require it. Should be absent in very strange configurations. Suggested-by:
-
David Hildenbrand authored
ept_* function should only be called with enable_ept being set. Reviewed-by:
-
David Hildenbrand authored
This function is only called with enable_ept. Reviewed-by:
-
David Hildenbrand authored
vmx and svm use zalloc, so this is not necessary. Reviewed-by:
-
David Hildenbrand authored
Make it a void and drop error handling code. Reviewed-by:
-
David Hildenbrand authored
And also get rid of that superfluous local variable "kvm". Reviewed-by:
-
David Hildenbrand authored
Reviewed-by:
-
David Hildenbrand authored
Let's just drop the return. Reviewed-by:
-
Wanpeng Li authored
The description in the Intel SDM of how the divide configuration register is used: "The APIC timer frequency will be the processor's bus clock or core crystal clock frequency divided by the value specified in the divide configuration register." Observation of baremetal shown that when the TDCR is change, the TMCCT does not change or make a big jump in value, but the rate at which it count down change. The patch update the emulation to APIC timer to so that a change to the divide configuration would be reflected in the value of the counter and when the next interrupt is triggered. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
If we take TSC-deadline mode timer out of the picture, the Intel SDM does not say that the timer is disable when the timer mode is change, either from one-shot to periodic or vice versa. After this patch, the timer is no longer disarmed on change of mode, so the counter (TMCCT) keeps counting down. So what does a write to LVTT changes ? On baremetal, the change of mode is probably taken into account only when the counter reach 0. When this happen, LVTT is use to figure out if the counter should restard counting down from TMICT (so periodic mode) or stop counting (if one-shot mode). This patch is based on observation of the behavior of the APIC timer on baremetal as well as check that they does not go against the description written in the Intel SDM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
Extract the logic of limit lapic periodic timer frequency to a new function, this function will be used by later patches. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
SDM 10.5.4.1 TSC-Deadline Mode mentioned that "Transitioning between TSC-Deadline mode and other timer modes also disarms the timer". So the APIC Timer Initial Count Register for one-shot/periodic mode should be reset. This patch do it. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Jeremy Cline authored
Make kvm_stat support Python 3 by changing the use of "print" to a function rather than a statement, switching from "iteritems" and "iterkeys" (removed in Python 3) to "items" and "keys" respectively, and decoding bytes to strings when dealing with text. With this change, kvm_stat is usable with Python 2.6 and greater. Signed-off-by:
Jeremy Cline <jeremy@jcline.org> Signed-off-by:
-
Wanpeng Li authored
KVM doesn't expose the PLE capability to the L1 hypervisor, however, ple_window still shows the default value on L1 hypervisor. This patch fixes it by clearing all the PLE related module parameter if there is no PLE capability. Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Thomas Huth authored
Paul is handling almost all of the powerpc related KVM patches nowadays, so he should be mentioned in the MAINTAINERS file accordingly. Signed-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Haozhong Zhang authored
When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the guest CR4. Before this CR4 loading, the guest CR4 refers to L2 CR4. Because these two CR4's are in different levels of guest, we should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which is used to handle guest writes to its CR4, checks the guest change to CR4 and may fail if the change is invalid. The failure may cause trouble. Consider we start a L1 guest with non-zero L1 PCID in use, (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0) and a L2 guest with L2 PCID disabled, (i.e. L2 CR4.PCIDE == 0) and following events may happen: 1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4 into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e. vcpu->arch.cr4) is left to the value of L2 CR4. 2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit, kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID, because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1 CR3.PCID != 0, L0 KVM will inject GP to L1 guest. Fixes: 4704d0be ("KVM: nVMX: Exiting from L2 to L1") Cc: qemu-stable@nongnu.org Signed-off-by:Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
-
- 10 Oct, 2017 2 commits
-
-
Ladi Prosek authored
is_last_gpte() is not equivalent to the pseudo-code given in commit 6bb69c9b ("KVM: MMU: simplify last_pte_bitmap") because an incorrect value of last_nonleaf_level may override the result even if level == 1. It is critical for is_last_gpte() to return true on level == 1 to terminate page walks. Otherwise memory corruption may occur as level is used as an index to various data structures throughout the page walking code. Even though the actual bug would be wherever the MMU is initialized (as in the previous patch), be defensive and ensure here that is_last_gpte() returns the correct value. This patch is also enough to fix CVE-2017-12188. Fixes: 6bb69c9b Cc: stable@vger.kernel.org Cc: Andy Honig <ahonig@google.com> Signed-off-by:
Ladi Prosek <lprosek@redhat.com> [Panic if walk_addr_generic gets an incorrect level; this is a serious bug and it's not worth a WARN_ON where the recovery path might hide further exploitable issues; suggested by Andrew Honig. - Paolo] Signed-off-by:
-
Ladi Prosek authored
The function updates context->root_level but didn't call update_last_nonleaf_level so the previous and potentially wrong value was used for page walks. For example, a zero value of last_nonleaf_level would allow a potential out-of-bounds access in arch/x86/mmu/paging_tmpl.h's walk_addr_generic function (CVE-2017-12188). Fixes: 155a97a3Signed-off-by:
-
- 09 Oct, 2017 1 commit
-
-
Linus Torvalds authored
-
- 07 Oct, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: - a couple of serious fixes: use after free and blacklist for WRITE SAME - one error leg fix: write_pending failure - one user experience problem: do not override max_sectors_kb - one minor unused function removal * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsis: Fix write_pending failure path scsi: libiscsi: Remove iscsi_destroy_session scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown scsi: sd: Do not override max_sectors_kb sysfs setting scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has three driver fixes for the newly introduced drivers and one ID addition for the i801 driver" * 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: make structure stm32f7_setup static const i2c: ensure termination of *_device_id tables i2c: i801: Add support for Intel Cedar Fork i2c: stm32f7: fix setup structure
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix driver strength selection when selecting hs400es - Delete bounce buffer handling: This change fixes a problem related to how bounce buffers are being allocated. However, instead of trying to fix that, let's just remove the mmc bounce buffer code altogether, as it has practically no use. MMC host: - meson-gx: A couple of fixes related to clock/phase/tuning - sdhci-xenon: Fix clock resource by adding an optional bus clock" * tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock mmc: meson-gx: include tx phase in the tuning process mmc: meson-gx: fix rx phase reset mmc: meson-gx: make sure the clock is rounded down mmc: Delete bounce buffer handling mmc: core: add driver strength selection when selecting hs400es -
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix up error path in xgene driver" * tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'
-
- 06 Oct, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: - build fix to export the clk_bulk_prepare() symbol - suspend fix for Samsung Exynos SoCs where we need to keep clks on across suspend - two critical clk markings for clks that shouldn't ever turn off on Rockchip SoCs - a fix for a copy-paste mistake on Rockchip rk3128 causing some clks to touch the same bit and trample over one another * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle clk: Export clk_bulk_prepare() clk: rockchip: add sclk_timer5 as critical clock on rk3128 clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error clk: rockchip: add pclk_pmu as critical clock on rk3128
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC udpates from Vineet Gupta: - updates for various platforms - boot log updates for upcoming HS48 family of cores (dual issue) * tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz ARC: fix allnoconfig build warning ARCv2: boot log: identify HS48 cores (dual issue) ARC: boot log: decontaminate ARCv2 ISA_CONFIG register arc: remove redundant UTS_MACHINE define in arch/arc/Makefile ARC: [plat-eznps] Update platform maintainer as Noam left ARC: [plat-hsdk] use actual clk driver to manage cpu clk ARC: [*defconfig] Reenable soft lock-up detector ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - fix a race between overlapping copy on write aio - fix cow fork swapping when we defragment reflinked files * tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: handle racy AIO in xfs_reflink_end_cow xfs: always swap the cow forks when swapping extents
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A collection of fixes for this series. This contains: - NVMe pull request from Christoph, one uuid attribute fix, and one fix for the controller memory buffer address for remapped BARs. - use-after-free fix for bsg, from Benjamin Block. - bcache race/use-after-free fix for a list traversal, fixing a regression in this merge window. From Coly Li. - null_blk change configfs dependency change from a 'depends' to a 'select'. This is a change from this merge window as well. From me. - nbd signal fix from Josef, fixing a regression introduced with the status code changes. - nbd MAINTAINERS mailing list entry update. - blk-throttle stall fix from Joseph Qi. - blk-mq-debugfs fix from Omar, fixing an issue where we don't register the IO scheduler debugfs directory, if the driver is loaded with it. Only shows up if you switch through the sysfs interface" * 'for-linus' of git://git.kernel.dk/linux-block: bsg-lib: fix use-after-free under memory-pressure nvme-pci: Use PCI bus address for data/queues in CMB blk-mq-debugfs: fix device sched directory for default scheduler null_blk: change configfs dependency to select blk-throttle: fix possible io stall when upgrade to max MAINTAINERS: update list for NBD nbd: fix -ERESTARTSYS handling nvme: fix visibility of "uuid" ns attribute bcache: use llist_for_each_entry_safe() in __closure_wake_up()
-
