- 24 Mar, 2009 40 commits
-
-
Avi Kivity authored
If we aren't doing mmio there's no need to exit to userspace (which will just be confused). Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Allow emulate_pop() to read into arbitrary memory rather than just the source operand. Needed for complicated instructions like far returns. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
If we've just emulated an instruction, we won't have any valid exit reason and associated information. Fix by moving the clearing of the emulation_required flag to the exit handler. This way the exit handler can notice that we've been emulating and abort early. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
The ususable bit is important for determining state validity; don't clobber it. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
The vmx guest state validity checks are full of bugs. Make them conform to the manual. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
e500 has additional interrupt vectors (and corresponding IVORs) for SPE and performance monitoring interrupts. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
When itlb or dtlb miss happens, E500 needs to update some mmu registers. So that the auto-load mechanism can work on E500 when write a tlb entry. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
E500 deosn't support this instruction. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Kernel for E500 need clear dbsr when startup. So add dbsr register in kvm_vcpu_arch for BOOKE. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
The Book E code will be shared with e500. I've left PID in kvmppc_core_emulate_op() just so that we don't need to move kvmppc_set_pid() right now. Once we have the e500 implementation, we can probably share that too. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
e500 will provide its own implementation of these. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Passing just the TLB index will ease an e500 implementation. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Hollis Blanchard authored
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
This is an x86 specific stucture and has no business living in common code. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Marcelo Tosatti authored
Certain clocks (such as TSC) in older 2.6 guests overaccount for lost ticks, causing severe time drift. Interrupt reinjection magnifies the problem. Provide an option to disable it. [avi: allow room for expansion in case we want to disable reinjection of other timers] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Since we advertise MSR_VM_HSAVE_PA, userspace will attempt to read it even on Intel. Implement fake support for this MSR to avoid the warnings. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Izik Eidus authored
vmap() on guest pages hides those pages from the Linux mm for an extended (userspace determined) amount of time. Get rid of it. Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Izik Eidus authored
This commit change the name of emulator_read_std into kvm_read_guest_virt, and add new function name kvm_write_guest_virt that allow writing into a guest virtual address. Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Marcelo Tosatti authored
VMX initializes the TSC offset for each vcpu at different times, and also reinitializes it for vcpus other than 0 on APIC SIPI message. This bug causes the TSC's to appear unsynchronized in the guest, even if the host is good. Older Linux kernels don't handle the situation very well, so gettimeofday is likely to go backwards in time: http://www.mail-archive.com/kvm@vger.kernel.org/msg02955.html http://sourceforge.net/tracker/index.php?func=detail&aid=2025534&group_id=180599&atid=893831 Fix it by initializating the offset of each vcpu relative to vm creation time, and moving it from vmx_vcpu_reset to vmx_vcpu_setup, out of the APIC MP init path. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Effectively reverting to the pre walk_shadow() version -- but now with the reusable for_each(). Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Eliminating a callback and a useless structure. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Using a for_each loop style removes the need to write callback and nasty casts. Implement the walk_shadow() using the for_each_shadow_entry(). Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jan Kiszka authored
Limit KVM_CAP_SET_GUEST_DEBUG only to those archs (currently x86) that support it. This simplifies user space stub implementations. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
The AMD SVM instruction family all overload the 0f 01 /3 opcode, further multiplexing on the three r/m bits. But the code decided that anything that isn't a vmmcall must be an lidt (which shares the 0f 01 /3 opcode, for the case that mod = 3). Fix by aborting emulation if this isn't a vmmcall. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
If cr4.pge is cleared, we ought to treat any ptes in the page as non-global. This allows us to remove the check from set_spte(). Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Don't allow a vcpu with cr4.pge cleared to use a shadow page created with cr4.pge set; this might cause a cr3 switch not to sync ptes that have the global bit set (the global bit has no effect if !cr4.pge). This can only occur on smp with different cr4.pge settings for different vcpus (since a cr4 change will resync the shadow ptes), but there's no cost to being correct here. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Instead of "calculating" it on every shadow page allocation, set it once when switching modes, and copy it when allocating pages. This doesn't buy us much, but sets up the stage for inheriting more information related to the mmu setup. Signed-off-by: Avi Kivity <avi@redhat.com>
-
Xiantao Zhang authored
Remove some unnecessary blank lines to accord with Kernel's coding style. Also remove vcpu_get_itir_on_fault due to no reference to it. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jan Kiszka authored
Remove the remaining arch fragments of the old guest debug interface that now break non-x86 builds. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-
Jes Sorensen authored
Implement KVM_IA64_VCPU_[GS]ET_STACK ioctl calls. This is required for live migrations. Patch is based on previous implementation that was part of old GET/SET_REGS ioctl calls. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Avi Kivity <avi@redhat.com>
-