- 28 Sep, 2010 1 commit
-
-
Kumar Sanghvi authored
Phonet stack assumes the presence of Pipe Controller, either in Modem or on Application Processing Engine user-space for the Pipe data. Nokia Slim Modems like WG2.5 used in ST-Ericsson U8500 platform do not implement Pipe controller in them. This patch adds Pipe Controller implemenation to Phonet stack to support Pipe data over Phonet stack for Nokia Slim Modems. Signed-off-by:
Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Sep, 2010 17 commits
-
-
David S. Miller authored
Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
-
Otavio Salvador authored
Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Signed-off-by:
-
Neil Horman authored
Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by:
-
Eric Dumazet authored
loopback driver uses dev->ml_priv to store its percpu stats pointer. It uses ugly casts "(void __percpu __force *)" to shut up sparse complains. Define an union to better document we use ml_priv in loopback driver and define a lstats field with appropriate types. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric Dumazet authored
__in_dev_get_rtnl(dev_out) is called while RTNL is not held, thus triggers a lockdep fault. At this point, we only perform a raw test of dev_out->ip_ptr being NULL, we dont need to make sure ip_ptr cant changed right after. We can use rcu_dereference_raw() for this. Reported-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Eric Dumazet authored
Instead of having two places were we allocate dev->_rx, introduce netif_alloc_rx_queues() helper and call it only from register_netdevice(), not from alloc_netdev_mq() Goal is to let drivers change dev->num_rx_queues after allocating netdev and before registering it. This also removes a lot of ifdefs in net/core/dev.c Signed-off-by:
-
Vasiliy Kulikov authored
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by:
-
Kulikov Vasiliy authored
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by:
-
Kulikov Vasiliy authored
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by:
-
Kulikov Vasiliy authored
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by:
-
Eric Dumazet authored
SOCK_MIN_RCVBUF current value is 256 bytes It doesnt permit to receive the smallest possible frame, considering socket sk_rmem_alloc/sk_rcvbuf account skb truesizes. On 64bit arches, sizeof(struct sk_buff) is 240 bytes. Add the typical 64 bytes of headroom, and we go over the limit. With old kernels and 32bit arches, we were under the limit, if netdriver was doing copybreak. Signed-off-by:
-
Vincent Stehlé authored
This enables auto loading for the smsc911x ethernet driver. Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by:
-
Tom Herbert authored
Reset queue mapping when an skb is reentering the stack via a tunnel. On second pass, the queue mapping from the original device is no longer valid. Signed-off-by:
Tom Herbert <therbert@google.com> Acked-by:
-
Eric Dumazet authored
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by:
-
Eric Dumazet authored
On 32bit arches, if PAGE_SIZE is smaller than 65536, we can use 16bit offset and size fields. This patch saves 72 bytes per skb on i386, or 128 bytes after rounding. Signed-off-by:
-
Karl Hiramoto authored
You can't call atomic_notifier_chain_unregister() while in atomic context. Fix, call un/register_atmdevice_notifier in module __init and __exit. Bug report: http://comments.gmane.org/gmane.linux.network/172603Reported-by:
Mikko Vinni <mmvinni@yahoo.com> Tested-by:
Karl Hiramoto <karl@hiramoto.org> Signed-off-by:
-
Eric Dumazet authored
Automatically allows vlans to get NETIF_F_HIGHDMA if underlying device supports it. On 32bit arches (and more precisely if CONFIG_HIGHMEM is enabled), it can help to reduce cost of illegal_highdma() and __skb_linearize() calls. Tested on tg3 , bnx2, bonding, this worked very well. This is a generalization of a patch provided by Yi Zou & Jeff Kirsher. Signed-off-by:
-
- 26 Sep, 2010 2 commits
-
-
Ondrej Zary authored
Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the SROM contains AUI port too. When TP loses link, the driver switches to non-existing AUI port (which reports that carrier is always present). Connecting TP back generates LinkPass interrupt but de_media_interrupt() is broken - it only updates the link state of currently connected media, ignoring the fact that LinkPass and LinkFail bits of MacStatus register belong to the TP port only (the chip documentation says that). This patch changes de_media_interrupt() to switch media to TP when link goes up (and media type is not locked) and also to update the link state only when the TP port is used. Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register need to be cleared (by writing 1) after reading or they're useless. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Ondrej Zary authored
At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by:
-
- 25 Sep, 2010 5 commits
-
-
Greg Rose authored
The function to resize the Tx/Rx rings had the potential to dereference a NULL pointer and the code would attempt to resize the Tx ring even if the Rx ring allocation had failed. This would cause some confusion in the return code semantics. Fixed up to just unwind the allocations if any of them fail and return an error. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Ondrej Zary authored
At least on older 21041-AA chips (mine is rev. 11), TP duplex autonegotiation causes the card not to work at all (link is up but no packets are transmitted). de4x5 disables autonegotiation completely. But it seems to work on newer (21041-PA rev. 21) so disable it only on rev<20 chips. Signed-off-by:
-
Eric Dumazet authored
We have for each socket : One spinlock (sk_slock.slock) One rwlock (sk_callback_lock) Possible scenarios are : (A) (this is used in net/sunrpc/xprtsock.c) read_lock(&sk->sk_callback_lock) (without blocking BH) <BH> spin_lock(&sk->sk_slock.slock); ... read_lock(&sk->sk_callback_lock); ... (B) write_lock_bh(&sk->sk_callback_lock) stuff write_unlock_bh(&sk->sk_callback_lock) (C) spin_lock_bh(&sk->sk_slock) ... write_lock_bh(&sk->sk_callback_lock) stuff write_unlock_bh(&sk->sk_callback_lock) spin_unlock_bh(&sk->sk_slock) This (C) case conflicts with (A) : CPU1 [A] CPU2 [C] read_lock(callback_lock) <BH> spin_lock_bh(slock) <wait to spin_lock(slock)> <wait to write_lock_bh(callback_lock)> We have one problematic (C) use case in inet_csk_listen_stop() : local_bh_disable(); bh_lock_sock(child); // spin_lock_bh(&sk->sk_slock) WARN_ON(sock_owned_by_user(child)); ... sock_orphan(child); // write_lock_bh(&sk->sk_callback_lock) lockdep is not happy with this, as reported by Tetsuo Handa It seems only way to deal with this is to use read_lock_bh(callbacklock) everywhere. Thanks to Jarek for pointing a bug in my first attempt and suggesting this solution. Reported-by:Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by:
-
Giuseppe Cavallaro authored
If the PM support is available this is passed through the platform instead to be hard-coded in the core files. WoL on Magic Frame can be enabled by using the ethtool support. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Masayuki Ohtake authored
Signed-off-by:
Masayuki Ohtake <masa-korg@dsn.okisemi.com> Signed-off-by:
-
- 24 Sep, 2010 1 commit
-
-
Eric Dumazet authored
While investigating a bit, I found ip_fragment() slow path was taken because ip_append_data() provides following layout for a send(MTU + N*(MTU - 20)) syscall : - one skb with 1500 (mtu) bytes - N fragments of 1480 (mtu-20) bytes (before adding IP header) last fragment gets 17 bytes of trail data because of following bit: if (datalen == length + fraggap) alloclen += rt->dst.trailer_len; Then esp4 adds 16 bytes of data (while trailer_len is 17... hmm... another bug ?) In ip_fragment(), we notice last fragment is too big (1496 + 20) > mtu, so we take slow path, building another skb chain. In order to avoid taking slow path, we should correct ip_append_data() to make sure last fragment has real trail space, under mtu... Signed-off-by:
-
- 23 Sep, 2010 14 commits
-
-
Eric Dumazet authored
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by:
-
Jesse Brandeburg authored
E1000 can benefit from calling the GRO receive functions. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
-
Jesse Brandeburg authored
Net drivers in general have an issue where timers fired by mod_timer or work threads with schedule_work are running outside of the rtnl_lock. With no other lock protection these routines are vulnerable to races with driver unload or reset paths. The longer term solution to this might be a redesign with safer locks being taken in the driver to guarantee no reentrance, but for now a safe and effective fix is to take the rtnl_lock in these routines. Signed-off-by:
-
Jesse Brandeburg authored
E1000 is using several timers that in a follow on patch will need to acquire the rtnl_lock in order to be safe. This patch moves the timer bodies into work queues which will allow the next patch to add rtnl_lock. Signed-off-by:
-
Yi Zou authored
If the netdev->features is set with NETIF_F_HIGHDMA, we should set the corresponding netdev->vlan_features as well to allow VLAN netdev created on top of the real netdev to be able to also benefit from HIGHDMA on 32bit system, reducing the performance hit that is caused by __skb_linearize(), particularly for large send. This is fixed in this patch for all Intel e1000, e1000e, igb, ixgbe, and ixgbe drivers since this should be beneficial to all devices supported by these drivers. Signed-off-by:
Yi Zou <yi.zou@intel.com> Tested-by:
-
Joseph Gasparakis authored
This patch adds support for the Intel(r) DH89xxCC series. The new device will be using Intel(r) i347-AT4 and Marvell(r) M88E1322 and M88E1112 PHYs. Support for these devices has also been added here. Signed-off-by:
Joseph Gasparakis <joseph.gasparakis@intel.com> Tested-by:
-
Alexander Duyck authored
This change corrects an issue in which we were setting all flag bits except for promisc instead of clearing the promisc bits due to the incorrect use of an |= instead of an &=. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Bruce Allan authored
For non-managed versions of 82579, set the bit that prevents the hardware from automatically configuring the PHY after resets only when the driver performs a reset, clear the bit after resets. This is so the hardware can configure the PHY automatically when the part is reset in a manner that is not controlled by the driver (e.g. in a virtual environment via PCI FLR) otherwise the PHY will be mis-configured causing issues such as failing to link at 1000Mbps. For managed versions of 82579, keep the previous behavior since the manageability firmware will handle the PHY configuration. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Bruce Allan authored
The subject workaround was causing CRC errors due to writing the wrong register with updates of the RCTL register. It was also found that the workaround function which modifies the RCTL register was being called in the middle of a read-modify-write operation of the RCTL register, so the function call has been moved appropriately. Lastly, jumbo frames must not be allowed when CRC stripping is disabled by a module parameter because the workaround requires the CRC be stripped. Signed-off-by:
-
Bruce Allan authored
On 82579, there is a hardware bug that can cause received packets to not get transferred from the PHY to the MAC due to K1 (a power saving feature of the PHY-MAC interconnect similar to ASPM L1). Since the MAC controls the accounting of missed packets, these will go unnoticed. Workaround the issue by setting the K1 beacon duration according to the link speed. Signed-off-by:
-
Bruce Allan authored
Two recent patches to cleanup the reset[1] and initial PHY configuration[2] code paths for ICH/PCH devices inadvertently left out a 10msec delay and device ID check respectively which are necessary for the 82566DC (device id 0x104b) to be configured properly, otherwise it will not get link. [1] commit e98cac44 [2] commit 3f0c16e8 CC: stable@kernel.org Signed-off-by:
-
Bruce Allan authored
Since the hardware is prevented from performing automatic PHY configuration (the driver does it instead), the OEM_WRITE_ENABLE bit in the EXTCNF_CTRL register will not get cleared preventing the SMBus address and the LED configuration to be written to the PHY registers. On 82579, do not check the OEM_WRITE_ENABLE bit. Signed-off-by:
-
Bruce Allan authored
When going to Sx, disable gigabit in PHY (e1000_oem_bits_config_ich8lan) in addition to the MAC before configuring PHY wakeup otherwise the PHY configuration writes might be missed. Also write the LED configuration and SMBus address to the PHY registers (e1000_oem_bits_config_ich8lan and e1000_write_smbus_addr, respectively). The reset is no longer needed since re-auto-negotiation is forced in e1000_oem_bits_config_ich8lan and leaving it in causes issues with auto-negotiating the link. Signed-off-by:
-
Ulrich Weber authored
otherwise ECT(1) bit will get interpreted as RTO_ONLINK and routing will fail with XfrmOutBundleGenError. Signed-off-by:
Ulrich Weber <uweber@astaro.com> Signed-off-by:
-
