- 15 Oct, 2007 8 commits
-
-
Ingo Molnar authored
remove the stat_gran code - it was disabled by default and it causes unnecessary overhead. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Mike Galbraith <efault@gmx.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de>
-
Ingo Molnar authored
use constants if !CONFIG_SCHED_DEBUG. this speeds up the code and reduces code-size: text data bss dec hex filename 27464 3014 16 30494 771e sched.o.before 26929 3010 20 29959 7507 sched.o.after Signed-off-by: -
Ingo Molnar authored
use the same defaults on both UP and SMP. Signed-off-by:
-
Ingo Molnar authored
track the maximum amount of time a task has executed while the CPU load was at least 2x. (i.e. at least two nice-0 tasks were runnable) Signed-off-by:
-
Ingo Molnar authored
small kernel/sched_debug.c cleanup - break up multi-variable assignment. no code changed: text data bss dec hex filename 38869 3550 24 42443 a5cb sched.o.before 38869 3550 24 42443 a5cb sched.o.after Signed-off-by:
-
Matthias Kaehlcke authored
Use list_for_each_entry_safe() instead of list_for_each_safe() in __wake_up_common() Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
-
Ingo Molnar authored
to get full child-runs-first semantics make sure the parent is rescheduled. Signed-off-by:
-
Ingo Molnar authored
fix the sched_child_runs_first flag: always call into ->task_new() if we are on the same CPU, as SCHED_OTHER tasks depend on it for correct initial setup. Signed-off-by:
-
- 14 Oct, 2007 32 commits
-
-
David Brownell authored
Make sure the mmc_spi driver can build without CONFIG_BLOCK. Issue noted by "Avuton Olrich" <avuton@gmail.com> and randconfig. While that won't be a common configuration, sometimes embedded boards use SDIO to interface WLAN or Bluetooth chips (vs some parallel interface), and don't provide an MMC/SD socket for use with flash memory cards. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86: x86: force timer broadcast on late AMD C1E detection x86: move local APIC timer init to the end of start_secondary() clockevents: introduce force broadcast notifier x86: fix missing include for vsyscall
-
Stephen Hemminger authored
The call to napi_disable() in the PCI shutdown handler is problematic, and is aggravated by the new NAPI. Also, make sure watchdog timer doesn't go off. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
The 64bit SMP bootup is slightly different to the 32bit one. It enables the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E systems have the C1E feature flag only set in the secondary CPU. Due to the early enable of the boot CPU local APIC timer the APIC timer is registered as a fully functional device. When we detect the wreckage during the bringup of the secondary CPU, we need to force the boot CPU into broadcast mode. Check the C1E caused APIC timer disable, when the secondary APIC timer is initialized. If the boot CPU APIC timer was registered as a functional clock event device, then fix this up and utilize the CLOCK_EVT_NOTIFY_BROADCAST_FORCE mechanism to force the already registered boot CPU APIC timer into broadcast mode. Tested by force injecting the failure mode. Signed-off-by: -
Thomas Gleixner authored
Preparatory patch for the AMD C1E wreckage fixup. Signed-off-by: -
Thomas Gleixner authored
The 64bit SMP bootup is slightly different to the 32bit one. It enables the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E systems have the C1E feature flag only set in the secondary CPU. Due to the early enable of the boot CPU local APIC timer the APIC timer is registered as a fully functional device. When we detect the wreckage during the bringup of the secondary CPU, we need to force the boot CPU into broadcast mode. Add a new notifier reason and implement the force broadcast in the clock events layer. Signed-off-by: -
Dave Jones authored
> Maybe I just picked a bad time to try, but... > > arch/x86/kernel/alternative.c: In function 'apply_alternatives': > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_START' undeclared (first use in this function) > arch/x86/kernel/alternative.c:191: error: (Each undeclared identifier is reported only once > arch/x86/kernel/alternative.c:191: error: for each function it appears in.) > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_END' undeclared (first use in this function) > make[1]: *** [arch/x86/kernel/alternative.o] Error 1 > make: *** [arch/x86/kernel] Error 2 Try this. Include missing header for vsyscall. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds authored
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits) hwmon: (vt8231) fix sparse warning hwmon: (sis5595) fix sparse warning hwmon: (w83627hf) don't assume bank 0 hwmon: (w83627hf) Fix setting fan min right after driver load hwmon: (w83627hf) De-macro sysfs callback functions hwmon: Add new combined driver for FSC chips hwmon: (ibmpex) Release IPMI user if hwmon registration fails hwmon: (dme1737) Add sch311x support hwmon: (dme1737) group functions logically hwmon: (dme1737) cleanups hwmon: IBM power meter driver hwmon: (coretemp) Add support for Celeron 4xx hwmon: (lm87) Disable VID when it should be hwmon: (w83781d) Add individual alarm and beep files hwmon: VRM is not read from registers MAINTAINERS: update hwmon subsystem git trees hwmon: Fix the code examples in documentation hwmon: update sysfs interface document - error handling hwmon: (thmc50) Fix a debug message hwmon: (thmc50) Don't create temp3 if not enabled ...
-
Martin Bachem authored
- killed paranoid NULL Pointer check - human readable LED states - support for "Eicon DIVA USB 4.0" (0x071d/0x1005) Signed-off-by:
Martin Bachem <info@colognechip.com> Signed-off-by:
-
Al Viro authored
if your mask is host-endian, you should apply it after le64_to_cpu(); if it's little-endian - before. Doing both (for the same mask and little-endian value) is broken. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
all uses of and almost all assignments to lro_desc->tcp_ack assume that it's net-endian; one converts net-endian to host-endian and sticks it in lro_desc->tcp_ack. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
... should be unsigned int Signed-off-by:
-
Al Viro authored
deal with signedness of the stuff passed to set_bit() et.al. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
copy_to_user() into on-stack array Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
... since that sucker is not 32bit-only and on 64bit skb->tail is an offset, not a pointer. Signed-off-by:
-
Mark M. Hoffman authored
Signed-off-by:Mark M. Hoffman <mhoffman@lightlink.com>
-
