- 17 Apr, 2020 1 commit
-
-
Cezary Rojewski authored
Update D0 <-> D3 sequence to correctly transition hardware and DSP core from and to D3. On top of that, set SHIM registers to their recommended defaults during D0 and D3 proceduces as HW does not reset registers for us. Connected to: [alsa-devel][BUG] bdw-rt5650 DSP boot timeout https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html Github issue ticket reference: https://github.com/thesofproject/linux/pull/1842 Tested on: - BDW-Y RVP with rt286 - SAMUS with rt5677 Proposed solution (both in July 2019 and on github): 'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"' is NAKed as it only covers the problem up and actually brings back the undefined behavior: some registers (e.g.: APLLSE) are describing LPT offsets rather than WPT ones. In consequence, during power-transitions driver issues incorrect writes and leaves the regs of interest alone. Existing patch - the non-revert - does not resolve the HW D3 issue at all as it ignores the recommended sequence and does not initialize hardware registers as expected. And thus, leaving things as are is also unacceptable. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Tested-by:
Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20200330194520.13253-1-cezary.rojewski@intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 16 Apr, 2020 2 commits
-
-
Geert Uytterhoeven authored
According to https://www.analog.com/, the company name is spelled "Analog Devices". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20200416103058.15269-7-geert+renesas@glider.beSigned-off-by:
-
Stephan Gerhold authored
Change the listed examples to use more generic node names, representing the class of the device nodes: - apr-service@<id> - dai@<id> Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi. Also add #address-cells + #size-cells to the q6asm example, without them the example produces dtc warnings. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200415081159.1098-1-stephan@gerhold.netSigned-off-by:
-
- 15 Apr, 2020 37 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: topology and firmware IPC updates for 5.8" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Long series made of a relatively small changes from multiple SOF contributors. I didn't find a good way to split this series since it tracks SOF minor ABI changes (backwards-compatible with older firmware files) and needs to be kept in-order. Future series should be much shorter. The main addition is support for an extended firmware manifest, which helps retrieve capabilities directly from the firmware file instead of the current IPC mechanism (still supported but will be deprecated). The IPC is realigned with the firmware, along with type cleanups, and the DMIC interface is simplified. The topology changes are mainly about a multi-cpu DAI fix, a new DC blocking component, better parsing of tuples and new parameters for ALH (SoundWire) and HDaudio DAIs. New tokens are also added to clarify the firmware behavior in the case of dependent pipelines, e.g. for echo reference generation. Artur Kloniecki (1): ASoC: SOF: Add XRUN flags field to struct sof_ipc_buffer. Bard Liao (5): ASoC: SOF: topology: fix: handle DAI widget connections properly with multiple CPU DAI's ASoC: SOF: align sof_ipc_dai_alh_params with FW ASoC: SOF: topology: Get ALH rate amd channels from topology ASoC: SOF: topology: fix: parse hda_tokens to &config->hda ASoC: SOF: topology: Get HDA rate and channels from topology Jaska Uimonen (2): ASoC: SOF: topology: stop parsing when all tokens have been found ASoC: SOF: topology: handle multiple sets of tuple arrays Karol Trzcinski (6): ASoC: SOF: Mark get_ext* function ext_hdr arguments as const ASoC: SOF: Introduce offset in firmware data ASoC: SOF: Introduce extended manifest ASoC: SOF: ext_manifest: parse firmware version ASoC: SOF: ext_manifest: parse windows ASoC: SOF: ext_manifest: parse compiler version Pan Xiuli (6): ASoC: SOF: add probe support extend data ASoC: SOF: add debug ABI version ASoC: SOF: change type char to uint8_t in info.h ASoC: SOF: change type char to uint8_t in trace.h ASoC: SOF: change type char to uint8_t in topology.h ASoC: SOF: make sof_ipc_cc_version to fixed length Sebastiano Carlucci (1): ASoC: SOF: topology: Add support for DC Blocker Seppo Ingalsuo (3): ASoC: SOF: Intel: Fix typo in header file comment text ASoC: SOF: Intel: Change DMIC load IPC to fixed length ASoC: SOF: Intel: Rename deprecated DMIC IPC struct field include/sound/sof.h | 3 + include/sound/sof/dai-intel.h | 20 +- include/sound/sof/info.h | 26 ++- include/sound/sof/topology.h | 16 +- include/sound/sof/trace.h | 2 +- include/uapi/sound/sof/abi.h | 2 +- include/uapi/sound/sof/ext_manifest.h | 91 ++++++++ include/uapi/sound/sof/tokens.h | 8 + sound/soc/sof/intel/hda-loader.c | 9 +- sound/soc/sof/loader.c | 226 ++++++++++++++++-- sound/soc/sof/topology.c | 323 ++++++++++++++++---------- 11 files changed, 568 insertions(+), 158 deletions(-) create mode 100644 include/uapi/sound/sof/ext_manifest.h base-commit: 83b35f45 -- 2.20.1 -
Mark Brown authored
Daniel Baluta <daniel.baluta@nxp.com>: From: Daniel Baluta <daniel.baluta@nxp.com> This patch series adds support for SOF on i.MX8M family. First board from this family that has a DSP is i.MX8MP. First 2 patches are trying to fix some compilation issues, the next two are adding the imx8m support and the last one adds the devicetree binding. Changes since v2: - add reviewed by from Rob to DT patch - fix ownership for patch 2 Daniel Baluta (3): ASoC: SOF: imx: Add i.MX8M HW support ASoC: SOF: Add i.MX8MP device descriptor dt-bindings: dsp: fsl: Add fsl,imx8mp-dsp entry Pierre-Louis Bossart (1): ASoC: SOF: imx: fix undefined reference issue YueHaibing (1): ASoC: SOF: imx8: Fix randbuild error .../devicetree/bindings/dsp/fsl,dsp.yaml | 2 + sound/soc/sof/imx/Kconfig | 32 +- sound/soc/sof/imx/Makefile | 2 + sound/soc/sof/imx/imx8m.c | 279 ++++++++++++++++++ sound/soc/sof/sof-of-dev.c | 14 + 5 files changed, 325 insertions(+), 4 deletions(-) create mode 100644 sound/soc/sof/imx/imx8m.c -- 2.17.1
-
Jaska Uimonen authored
Widget's parameters are set in topology and they usually consist of several different types of tuple arrays like strings, words and bytes. Here this kind of combination is called a "set". Lately we've seen more complex widget definitions with multiple identical sets of tuple arrays. One example is the dmic pdm configuration, which is currently handled as a special case in token parsing. This is not scalable for other components with multiple sets. So add a new function sof_parse_token_sets, which can be used to parse multiple sets. This function defines the number of sets and an offset to copy the tokens to correct positions in the destination ipc struct. Old sof_parse_token function will be a special case of calling sof_parse_token_sets to parse 1 set with offset 0. Finally modify the dmic dai link loading to use the new sof_parse_array_sets to load multiple pdm configs. Signed-off-by:
Jaska Uimonen <jaska.uimonen@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200415202816.934-25-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Jaska Uimonen authored
Optimize the parsing so that it will stop after all required tokens have been found as there is no reason to continue after that. Signed-off-by:
-
Bard Liao authored
FW interface for HDA DAI parameters was extended with information on sampling rate and channel count in version 3.16. Align kernel header with the FW change. This change is backwards compatible. Old firmware will ignore the values. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Bard Liao authored
Items in hda_tokens are for &config->hda. So fix it to the right object. This error has been harmless as hda_tokens array was empty. Signed-off-by:
-
Bard Liao authored
FW will need these params for synchronized playback over multiple DAIs. Signed-off-by:
Sławomir Błauciak <slawomir.blauciak@linux.intel.com> Reviewed-by:
-
Bard Liao authored
Aligned with FW change. The rate and channel values are needed in case of a connection with a demux for synchronize playback over multiple ALH DAIs. Signed-off-by:
-
Seppo Ingalsuo authored
This patch restores the field name to fifo_bits_b since the legacy firmware compatibility code (for firmware ABI 3.0.0 or earlier) sets it in sof_link_dmic_load() function in topology.c. Setting of reserved_2 didn't look appropriate. Signed-off-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by:
-
Seppo Ingalsuo authored
This patch changes the flexible array member pdm[] into a fixed array of four that is the max. number of stereo PDM controllers in the current Intel platforms. The change simplifies DMIC DAI load code and aligns the IPC with other DAI types. The change is compatible with old and new firmware with similar change. The ABI minor version is increased due to change in IPC headers. Signed-off-by:
-
Seppo Ingalsuo authored
This patch fixes the typo in word "microphone". Signed-off-by:
-
Artur Kloniecki authored
Currently if a component source buffer underruns or a component sink buffer overruns the pipeline will enter an XRUN status and attempt recovery. This is desired in most pipelines but some topologies need to support use cases where we expect buffers to underrun or overrun. Host ---> Proc----> Selector0 --> Buf0 ---- > DAI Playback | v Buf1 | v Host <---------------Selector1 <----- Buf2 <----- Echo Ref DAI In the example above we two host PCMs that can be independently started/stopped thereby causing buf1 to either underrun or overrun (and stop the pipelines). Buf1 should be permitted to underrun or overrun without invoking pipeline XRUN logic and should over write oldest data (for overrun) and readback 0s (for underrun). 2 flags have been added for use during buffer instantiation: SOF_BUF_OVERRUN_PERMITTED and SOF_BUF_UNDERRUN_PERMITTED, along with struct sof_ipc_buffer member fields: flags and reserved. Flags field is supposed to hold the above-mentioned flags to allow some control over XRUN behaviour. Also added reserved field to the structure in case it comes in handy some time in the future. This is an incremental ABI change as the new fields are ignored by older versions of the firmware. Signed-off-by:Artur Kloniecki <arturx.kloniecki@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
Align struct sof_ipc_cc_version to firmware definition in SOF ABI 3.15.0. The struct definition was changed due to errors in FW build. The Cadence XCC compiler produces incorrect linkage section sizes, when a variable length array is used in the compiler version struct. The firmware definition was changed to a fixed 32 byte compiler description string. This length covers all released firmware binaries and thus only a minor ABI change is needed. As the same structure is used in IPC messages between driver and firmware, the kernel needs to be aligned to firmware change. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Pan Xiuli authored
Use uint8_t to replace char in packed ABI structs to have fixed length for struct. Signed-off-by:
-
Pan Xiuli authored
Use uint8_t to replace char in packed ABI structs to have fixed length for struct. Signed-off-by:
-
Pan Xiuli authored
Use uint8_t to replace char in packed ABI structs to have fixed length for struct. Signed-off-by:
-
Pan Xiuli authored
Add new debug ABI version to be increased when changing user space debug interfaces while the the main FW ABI is not affected. The abi_dbg_version share same definition with SOF_ABI_VER This change main ABI to 3.14.0 Signed-off-by:
-
Pan Xiuli authored
Share how many injection probe DMAs and how many probe points driver can request from FW. injection_dmas_max 0 means injection is not supported probe_points_max 0 means whole probes subsystem in FW is not enabled and not compiled in. ABI version change to 3.14.0 Signed-off-by:
-
Sebastiano Carlucci authored
This commit adds the enumerations to support the dc blocker component from SOF. Signed-off-by:
Sebastiano Carlucci <scarlucci@google.com> Signed-off-by:
Curtis Malainey <curtis@malainey.com> Reviewed-by:
Seppo Ingalsuo <seppo.ingalsuo@intel.com> Reviewed-by:
-
Karol Trzcinski authored
The compiler version and description can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Signed-off-by:
-
Karol Trzcinski authored
The window description can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
-
Karol Trzcinski authored
The firmware version can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
-
Karol Trzcinski authored
Extended manifest is a place to store build time known firmware metadata, for example firmware version or used compiler description. Given information is read on host side before firmware startup. This part of output binary is located as a first structure in binary file. Extended manifest should be skipped in firmware loading routine. Signed-off-by:
-
Karol Trzcinski authored
It makes possible to provide extra information to host before downloading firmware. Extra data should be put at the beginning of firmware binary. Exchange is done without any effort on DSP side. This mechanism will be used in extended manifest. Signed-off-by:
-
Karol Trzcinski authored
This pointer can be mark as const to indicate that it is read only pointer. Signed-off-by:
-
Bard Liao authored
Currently, when connecting a DAI widget to the BE CPU DAI, we overwrite the previous connections. This worked because we only ever had 1 CPU DAI for each rtd until now. But with multiple CPU DAI's, a new connection between a BE CPU DAI and the DAI widget should be established without affecting the previous connections. So, modify the loop to set the playback/capture widget for the first BE CPU DAI that does not have a connection established previously. Fixes: 4a7e26a4d833 ("ASoC: SOF: topology: connect dai widget to all cpu-dais") Signed-off-by: -
Daniel Baluta authored
Minimal implementation needs the same DT properties as existing compatible strings. So, we just add the new compatible string in the list. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200409071832.2039-6-daniel.baluta@oss.nxp.comSigned-off-by:
-
Daniel Baluta authored
Add SOF device and DT descriptor for i.MX8MP platform. Signed-off-by:
-
Daniel Baluta authored
This adds skeleton support for the audio DSP hardware found on NXP i.MX8M platform. There is one notable difference between i.MX8M and i.MX8, which doesn't allow us to reuse HW support from imx8.c file designed for i.MX8: On i.MX8M resources (clocks, power, pinctrl, etc) are managed by the Linux kernel while on i.MX8 resources are managed by a separate System Controller Firmware. This makes the interface to those resources completely different. Signed-off-by:
-
Pierre-Louis Bossart authored
make.cross ARCH=mips allyesconfig fails with the following error: sound/soc/sof/sof-of-dev.o:(.data.sof_of_imx8qxp_desc+0x40): undefined reference to `sof_imx8x_ops'. This seems to be a Makefile order issue, solve by using the same structure as for Intel platforms. Fixes: f9ad7546 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency") Signed-off-by:
-
YueHaibing authored
when do randconfig like this: CONFIG_SND_SOC_SOF_IMX8_SUPPORT=y CONFIG_SND_SOC_SOF_IMX8=y CONFIG_SND_SOC_SOF_OF=y CONFIG_IMX_DSP=m CONFIG_IMX_SCU=y there is a link error: sound/soc/sof/imx/imx8.o: In function 'imx8_send_msg': imx8.c:(.text+0x380): undefined reference to 'imx_dsp_ring_doorbell' Select IMX_DSP in SND_SOC_SOF_IMX8_SUPPORT to fix this Fixes: f9ad7546 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Pierre-Louis Bossart authored
On Baytrail/Cherrytrail, the Atom/SST driver fails miserably: [ 9.741953] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01 [ 9.832992] intel_sst_acpi 80860F28:00: FW sent error response 0x40034 [ 9.833019] intel_sst_acpi 80860F28:00: FW alloc failed ret -4 [ 9.833028] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5 [ 9.833033] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 9.833037] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed [ 9.853942] intel_sst_acpi 80860F28:00: FW sent error response 0x40034 [ 9.853974] intel_sst_acpi 80860F28:00: FW alloc failed ret -4 [ 9.853984] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5 [ 9.853990] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 9.853994] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed Commit b56be800 ("ASoC: soc-pcm: call snd_soc_dai_startup()/shutdown() once") was the initial problematic commit. Commit 1ba616bd ("ASoC: soc-dai: fix DAI startup/shutdown sequence") was an attempt to fix things but it does not work on Baytrail, reverting all changes seems necessary for now. Fixes: 1ba616bd ("ASoC: soc-dai: fix DAI startup/shutdown sequence") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200415030437.23803-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
There is unnecessary semicolon after last bracket of if statement, remove it. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20200415162435.31859-1-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
As done in already existing cases, we should use le32_to_cpu macro while accessing hdr->magic. Found with sparse. Signed-off-by:
-
Stephan Gerhold authored
For some reason, the MI2S DAIs do not have channels_min/max defined. This means that snd_soc_dai_stream_valid() returns false, i.e. the DAIs have neither valid playback nor capture stream. It's quite surprising that this ever worked correctly, but in 5.7-rc1 this is now failing badly: :) Commit 0e9cf4c4 ("ASoC: pcm: check if cpu-dai supports a given stream") introduced a check for snd_soc_dai_stream_valid() before calling hw_params(), which means that the q6i2s_hw_params() function was never called, eventually resulting in: qcom-q6afe aprsvc:q6afe:4:4: no line is assigned ... even though "qcom,sd-lines" is set in the device tree. Commit 9b5db059 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") now even avoids creating PCM devices if the stream is not supported, which means that it is failing even earlier with e.g.: Primary MI2S: ASoC: no backend playback stream Avoid all that trouble by adding channels_min/max for the MI2S DAIs. Fixes: 24c4cbcf ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Signed-off-by:
-
Tang Bin authored
In the function fsl_micfil_probe(), when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by:
Shengju Zhang <zhangshengju@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200415044513.17492-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Pierre-Louis Bossart authored
Use macro and solve compilation issues Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
