- 06 Jan, 2013 35 commits
-
-
Arun Kumar K authored
Flushing of delay DPB buffers have to be done during stream off. In MFC v6, it is done with a risc to host command. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
Arun Mankuzhi <arun.m@samsung.com> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Wei Yongjun authored
The variable index is initialized but never used otherwise, so remove the unused variable. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Arun Kumar K authored
This patch will add the device tree support for MFC driver. Signed-off-by:
-
Shaik Ameer Basha authored
This patch adds the dmabuf export buffer feature to the Exynos G-Scaler driver. Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
Tony Prisk authored
Replace IS_ERR_OR_NULL with IS_ERR on clk_get results. Signed-off-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: sizeof *fmt should be sizeof(*fmt) WARNING: sizeof *res should be sizeof(*res) WARNING: sizeof *res should be sizeof(*res) WARNING: sizeof sd->name should be sizeof(sd->name) Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: sizeof *ctx should be sizeof(*ctx) FILE: media/platform/s5p-tv/hdmiphy_drv.c:287: ctx = kzalloc(sizeof *ctx, GFP_KERNEL); Signed-off-by:
-
Sachin Kamat authored
Silences checkpatch warnings of type: WARNING: sizeof mdev->res should be sizeof(mdev->res) FILE: media/platform/s5p-tv/mixer_drv.c:301: memset(&mdev->res, 0, sizeof mdev->res); WARNING: sizeof *mdev should be sizeof(*mdev) FILE: media/platform/s5p-tv/mixer_drv.c:385: mdev = kzalloc(sizeof *mdev, GFP_KERNEL); Signed-off-by:
-
Sachin Kamat authored
Silences checkpatch warnings of the type: WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8) FILE: media/platform/s5p-tv/mixer_reg.c:473: filter_y_horiz_tap8, sizeof filter_y_horiz_tap8); Signed-off-by:
-
Sachin Kamat authored
Silences several checkpatch warnings of the type: WARNING: sizeof *out should be sizeof(*out) FILE: media/platform/s5p-tv/mixer_video.c:98: out = kzalloc(sizeof *out, GFP_KERNEL); Signed-off-by:
-
Sachin Kamat authored
Silences the following checkpatch warnings: WARNING: sizeof *sdev should be sizeof(*sdev) FILE: media/platform/s5p-tv/sdo_drv.c:304: sdev = devm_kzalloc(&pdev->dev, sizeof *sdev, GFP_KERNEL); WARNING: sizeof sdev->sd.name should be sizeof(sdev->sd.name) FILE: media/platform/s5p-tv/sdo_drv.c:394: strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name); Signed-off-by:
-
Tony Prisk authored
Replace IS_ERR_OR_NULL with IS_ERR on clk_get results. Signed-off-by:
-
Sylwester Nawrocki authored
Use proper return value test for clk_get() and devm_regulator_get() functions and propagate any errors from the clock and the regulator subsystem to the driver core. In two cases a proper error code is now returned rather than 0. Reported-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch patch eliminates potential AB-BA deadlock when one process calls open(), or VIDIOC_S/TRY_FMT ioctl on the FIMC capture video node, while other thread is reconfiguring media links via media device node: /dev/video? open() /dev/media? MEDIA_IOC_SETUP_LINK ioctl mutex_lock(video_lock) mutex_lock(graph_lock) fimc_pipeline_open() fimc_md_link_notify() mutex_lock(graph_lock) mutex_lock(video_lock) ... ... The deadlock is avoided by always taking the graph mutex first in video node open() or an ioctl, before the video lock is acquired. Reversed order seems impossible, since media device driver's link_notify callback is called with media graph mutex already held. To ensure proper locking order VIDIOC_S_FMT and VIDIOC_TRY_FMT ioctls are not serialized in the v4l2-core and the driver takes care of it itself. Signed-off-by: -
Tony Prisk authored
Replace IS_ERR_OR_NULL with IS_ERR on clk_get results. Signed-off-by:
-
Sylwester Nawrocki authored
Replace the hard coded csi_sensors[] array size with a relevant constant to make sure we don't iterate beyond the actual array. Signed-off-by:
-
Sylwester Nawrocki authored
This fixes following issue found with a static analysis tool: Pointer 'ffmt' returned from call to function 'fimc_capture_try_format' at line 1522 may be NULL and may be dereferenced at line 1535. Although it shouldn't happen in practice, add the NULL pointer check to be on the safe side. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
There is no need to keep dummy sleep() callback implementation as DVB-core checks existence of it before calls callback. Due to that we can remove it. FC0012 is based of direct-conversion receiver architecture (aka Zero-IF) where is no IF used. Due to that IF is always 0 Hz. Fix comment to point that. Signed-off-by:
Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
No need to copy config to the driver state. Those are coming from the const struct and could be used directly. Signed-off-by:
-
Antti Palosaari authored
That adds support for AF9035 dual devices having FC0012 tuners. Signed-off-by:
-
Antti Palosaari authored
We need feed clock to slave demodulator at the very beginning in case of dual tuner configuration. I am not sure if that configuration changes clock output divider or enable clock output itself... Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
I need even more configuration options and overloading dvb_attach() for all those sounds quite stupid. Due to that switch struct and make room for new options. Signed-off-by:
-
Antti Palosaari authored
Various small changes and fixes releated to dual mode. Signed-off-by:
-
Jose Alberto Reguero authored
Adds initial support for af9035 dual mode designs. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> [crope@iki.fi: fix merge conflict] Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Now that it uses videobuf2, em28xx can support DMABUF. Tested with an HVR-950 on analog mode and a 2gen i5core machine with an i915 graphics adapter. Signed-off-by:
-
- 05 Jan, 2013 5 commits
-
-
Mauro Carvalho Chehab authored
The above commit were applied only partially; it broke tuner and demod attach, but the part that added it to ngene_info was missing. Not sure what happened there, but, without this patch, a regression would be happening. Also, gcc complains about a defined but not used symbol. So, apply manually the missing part. Cc: Patrice Chotard <patricechotard@free.fr> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: -
Fabio Estevam authored
Converting it to platform code can make the code smaller. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Javier Martin authored
After removing i.mx25 support and buf_cleanup() callback, buffer states are not used in the code any longer. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Javier Martin authored
All necessary tasks to end the streaming properly are already implemented in mx2_stop_streaming() and nothing remains to be done in this callback. Furthermore, it only included debug messages so it can be removed. Signed-off-by:
-
Javier Martin authored
i.MX25 support has been broken for several releases now and nobody seems to care about it. Signed-off-by:
-
