Currently there's some CMO (Cooperative Memory Overcommit) code, in
plpar_wrappers.h. Some of it is #ifdef CONFIG_PSERIES and some of it
isn't. The end result being if a file includes plpar_wrappers.h it won't
build with CONFIG_PSERIES=n.

Fix it by moving the CMO code into platforms/pseries. The two hcall
wrappers can just be moved into their only caller, cmm.c, and the
accessors can go in pseries.h.

Note we need the accessors because cmm.c can be built as a module, so
there needs to be a split between the built-in code vs the module, and
that's achieved by using those accessors.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Rename "sift" to "shift".
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts storcenter_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts pseries_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts ppc6xx_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts ppc64e_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts ppc64_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts pmac32_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This patch disables deprecated IDE subsystem in pasemi_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).

Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts maple_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts g5_defconfig to use libata PATA drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts chrp32_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts cell_defconfig to use libata PATA drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts amigaone_defconfig to use libata PATA
drivers.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Returning a negative value for a boolean function seem to have the
undesired effect of returning true. require_paranoia_below() is a
boolean function, but the variable used to store the return value is an
integer, receiving -1 or 0. This patch converts rc to bool, replaces -1
by false, and 0 by true.

mpe: This wasn't exhibiting in practice because the common case, where
we do the comparison of the desired level vs the current value, was
being compiled into a computation based on the result of the comparison,
ie. it wasn't using the default -1 value at all. However that was just
luck and the code is still wrong.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make sure to drop any device reference taken by vio_find_node() when
adding and removing virtual I/O slots.

Fixes: 5eeb8c63 ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add comment clarifying that vio_find_node() takes a reference to the
embedded struct device which needs to be dropped after use.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make sure to drop any reference taken by bus_find_device() when creating
devices during init and driver registration.

Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make sure to drop any reference taken by bus_find_device() in the sysfs
callbacks that are used to create and destroy devices based on
device-tree entries.

Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This condenses the opal node searching into a single function that finds
all compatible nodes, instead of just searching the ibm,opal children,
for ipmi, flash, and prd similar to how opal-i2c nodes are found.
Signed-off-by: Jack Miller <jack@codezen.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Load monitored is no longer supported on POWER9 so let's remove the
code.

This reverts commit bd3ea317 ("powerpc: Load Monitor Register
Support").
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Load monitored won't be supported in POWER9, so PPC_FEATURE2_ARCH_3_00
(in HWCAP2) will no longer imply Load monitor support.

These Load monitored tests are enabled by PPC_FEATURE2_ARCH_3_00 so
they are now bogus and need to be removed.

This reverts commit 16c19a2e ("selftests/powerpc: Load Monitor
Register Tests").
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

No one uses reiserfs much these days, or is likely to in future. So drop
it from pseries and powernv defconfigs to save time and space. It's
still enabled in ppc64_defconfig so we get some build coverage.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We can use the front led of powerbooks/ibooks to visualize disk activity
without the deprecated IDE_GD_ATA.
Signed-off-by: Elimar Riesebieter <riesebie@lxtec.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In ISA v2.05, the tlbiel instruction takes two arguments, RB and L:

tlbiel RB,L

+---------+---------+----+---------+---------+---------+----+
|    31   |    /    | L  |    /    |    RB   |   274   | /  |
| 31 - 26 | 25 - 22 | 21 | 20 - 16 | 15 - 11 |  10 - 1 | 0  |
+---------+---------+----+---------+---------+---------+----+

In ISA v2.06 tlbiel takes only one argument, RB:

tlbiel RB

+---------+---------+---------+---------+---------+----+
|    31   |    /    |    /    |    RB   |   274   | /  |
| 31 - 26 | 25 - 21 | 20 - 16 | 15 - 11 |  10 - 1 | 0  |
+---------+---------+---------+---------+---------+----+

And in ISA v3.00 tlbiel takes five arguments:

tlbiel RB,RS,RIC,PRS,R

+---------+---------+----+---------+----+----+---------+---------+----+
|    31   |    RS   | /  |   RIC   |PRS | R  |    RB   |   274   | /  |
| 31 - 26 | 25 - 21 | 20 | 19 - 18 | 17 | 16 | 15 - 11 |  10 - 1 | 0  |
+---------+---------+----+---------+----+----+---------+---------+----+

However the assembler also accepts "tlbiel RB", and generates
"tlbiel RB,r0,0,0,0".

As you can see above the L field from the v2.05 encoding overlaps with the
reserved field of the v2.06 encoding, and the low bit of the RS field of the
v3.00 encoding.

Currently in __tlbiel() we generate two tlbiel instructions manually using hex
constants. In the first case, for MMU_PAGE_4K, we generate "tlbiel RB,0", which
is safe in all cases, because the L bit is zero.

However in the default case we generate "tlbiel RB,1", therefore setting bit 21
to 1.

This is not an actual bug on v2.06 processors, because the CPU ignores the value
of the reserved field. However software is supposed to encode the reserved
fields as zero to enable forward compatibility.

On v3.00 processors setting bit 21 to 1 and no other bits of RS, means we are
using r1 for the value of RS.

Although it's not obvious, the code sets the IS field (bits 10-11) to 0 (by
omission), and L=1, in the va value, which is passed as RB. We also pass R=0 in
the instruction.

The combination of IS=0, L=1 and R=0 means the value of RS is not used, so even
on ISA v3.00 there is no actual bug.

We should still fix it, as setting a reserved bit on v2.06 is naughty, and we
are only avoiding a bug on v3.00 by accident rather than design. Use
ASM_FTR_IFSET() to generate the single argument form on ISA v2.06 and later, and
the two argument form on pre v2.06.

Although there may be very old toolchains which don't understand tlbiel, we have
other code in the tree which has been using tlbiel for over five years, and no
one has reported any build failures, so just let the assembler generate the
instructions.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Rewrite change log, use IFSET instead of IFCLR]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When we're not compiling for a specific CPU, ie. none of the
CONFIG_POWERx_CPU options are set, and CONFIG_GENERIC_CPU *is* set, we
currently don't pass any -mcpu option to the compiler. This means the
compiler builds for a "generic" Power CPU.

But back in 2014 we dropped support for pre power4 CPUs in commit
468a3302 ("powerpc: Drop support for pre-POWER4 cpus").

Given that, there's no point in building the kernel to run on pre power4
cpus. So update the flags we pass to the compiler when
CONFIG_GENERIC_CPU is set, to specify -mcpu=power4.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This adds a config option that can help exercise the case when
the kernel is not running at PAGE_OFFSET.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

An hcall was recently added that does exactly what we need during kexec
- it clears the entire MMU hash table, ignoring any VRMA mappings.

Try it and fall back to the old method if we get a failure.

On a POWER8 box with 5TB of memory, this reduces the time it takes to
kexec a new kernel from from 4 minutes to 1 minute.
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
[mpe: Split into separate functions and tweak function naming]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

That's unclear why lockdep shows the following warning but adding a
lockdep class to struct pmac_i2c_bus solves it

[   20.507795] ======================================================
[   20.507796] [ INFO: possible circular locking dependency detected ]
[   20.507800] 4.8.0-rc7-00037-gd2ffb010 #21 Not tainted
[   20.507801] -------------------------------------------------------
[   20.507803] swapper/0/1 is trying to acquire lock:
[   20.507818]  (&bus->mutex){+.+.+.}, at: [<c000000000052830>] .pmac_i2c_open+0x30/0x100
[   20.507819]
[   20.507819] but task is already holding lock:
[   20.507829]  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
[   20.507830]
[   20.507830] which lock already depends on the new lock.
[   20.507830]
[   20.507832]
[   20.507832] the existing dependency chain (in reverse order) is:
[   20.507837]
[   20.507837] -> #4 (&policy->rwsem){+.+.+.}:
[   20.507844]        [<c00000000082385c>] .down_write+0x6c/0x110
[   20.507849]        [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
[   20.507855]        [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110
[   20.507860]        [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250
[   20.507866]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
[   20.507872]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
[   20.507878]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
[   20.507883]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
[   20.507887]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
[   20.507894]
[   20.507894] -> #3 (subsys mutex#2){+.+.+.}:
[   20.507899]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
[   20.507903]        [<c0000000004d7f24>] .bus_probe_device+0x44/0xe0
[   20.507907]        [<c0000000004d5208>] .device_add+0x508/0x730
[   20.507911]        [<c0000000004dd528>] .register_cpu+0x118/0x190
[   20.507916]        [<c000000000b14450>] .topology_init+0x148/0x248
[   20.507921]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
[   20.507925]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
[   20.507929]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
[   20.507934]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
[   20.507939]
[   20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}:
[   20.507944]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
[   20.507950]        [<c000000000087a9c>] .register_cpu_notifier+0x2c/0x70
[   20.507955]        [<c000000000b267e0>] .spawn_ksoftirqd+0x18/0x4c
[   20.507959]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
[   20.507964]        [<c000000000b0f770>] .kernel_init_freeable+0xb0/0x28c
[   20.507968]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
[   20.507972]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
[   20.507978]
[   20.507978] -> #1 (&host->mutex){+.+.+.}:
[   20.507982]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
[   20.507987]        [<c0000000000527e8>] .kw_i2c_open+0x18/0x30
[   20.507991]        [<c000000000052894>] .pmac_i2c_open+0x94/0x100
[   20.507995]        [<c000000000b220a0>] .smp_core99_probe+0x260/0x410
[   20.507999]        [<c000000000b185bc>] .smp_prepare_cpus+0x280/0x2ac
[   20.508003]        [<c000000000b0f748>] .kernel_init_freeable+0x88/0x28c
[   20.508008]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
[   20.508012]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
[   20.508018]
[   20.508018] -> #0 (&bus->mutex){+.+.+.}:
[   20.508023]        [<c0000000000ed5b4>] .lock_acquire+0x84/0x100
[   20.508027]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
[   20.508032]        [<c000000000052830>] .pmac_i2c_open+0x30/0x100
[   20.508037]        [<c000000000052e14>] .pmac_i2c_do_begin+0x34/0x120
[   20.508040]        [<c000000000056bc0>] .pmf_call_one+0x50/0xd0
[   20.508045]        [<c00000000068ff1c>] .g5_pfunc_switch_volt+0x2c/0xc0
[   20.508050]        [<c00000000068fecc>] .g5_pfunc_switch_freq+0x1cc/0x1f0
[   20.508054]        [<c00000000068fc2c>] .g5_cpufreq_target+0x2c/0x40
[   20.508058]        [<c0000000006873ec>] .__cpufreq_driver_target+0x23c/0x840
[   20.508062]        [<c00000000068c798>] .cpufreq_gov_performance_limits+0x18/0x30
[   20.508067]        [<c00000000068915c>] .cpufreq_start_governor+0xac/0x100
[   20.508071]        [<c00000000068a788>] .cpufreq_set_policy+0x208/0x260
[   20.508076]        [<c00000000068abdc>] .cpufreq_init_policy+0x6c/0xb0
[   20.508081]        [<c00000000068ae70>] .cpufreq_online+0x250/0x9d0
[   20.508085]        [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110
[   20.508090]        [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250
[   20.508094]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
[   20.508099]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
[   20.508103]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
[   20.508107]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
[   20.508112]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
[   20.508113]
[   20.508113] other info that might help us debug this:
[   20.508113]
[   20.508121] Chain exists of:
[   20.508121]   &bus->mutex --> subsys mutex#2 --> &policy->rwsem
[   20.508121]
[   20.508123]  Possible unsafe locking scenario:
[   20.508123]
[   20.508124]        CPU0                    CPU1
[   20.508125]        ----                    ----
[   20.508128]   lock(&policy->rwsem);
[   20.508132]                                lock(subsys mutex#2);
[   20.508135]                                lock(&policy->rwsem);
[   20.508138]   lock(&bus->mutex);
[   20.508139]
[   20.508139]  *** DEADLOCK ***
[   20.508139]
[   20.508141] 3 locks held by swapper/0/1:
[   20.508150]  #0:  (cpu_hotplug.lock){++++++}, at: [<c000000000087838>] .get_online_cpus+0x48/0xc0
[   20.508159]  #1:  (subsys mutex#2){+.+.+.}, at: [<c0000000004d7670>] .subsys_interface_register+0x50/0x110
[   20.508168]  #2:  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
[   20.508169]
[   20.508169] stack backtrace:
[   20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc7-00037-gd2ffb010 #21
[   20.508175] Call Trace:
[   20.508180] [c0000000790c2b90] [c00000000082cc70] .dump_stack+0xe0/0x14c (unreliable)
[   20.508184] [c0000000790c2c20] [c000000000828c88] .print_circular_bug+0x350/0x388
[   20.508188] [c0000000790c2cd0] [c0000000000ecb0c] .__lock_acquire+0x196c/0x1d30
[   20.508192] [c0000000790c2e50] [c0000000000ed5b4] .lock_acquire+0x84/0x100
[   20.508196] [c0000000790c2f20] [c000000000820448] .mutex_lock_nested+0xa8/0x590
[   20.508201] [c0000000790c3030] [c000000000052830] .pmac_i2c_open+0x30/0x100
[   20.508206] [c0000000790c30c0] [c000000000052e14] .pmac_i2c_do_begin+0x34/0x120
[   20.508209] [c0000000790c3150] [c000000000056bc0] .pmf_call_one+0x50/0xd0
[   20.508213] [c0000000790c31e0] [c00000000068ff1c] .g5_pfunc_switch_volt+0x2c/0xc0
[   20.508217] [c0000000790c3250] [c00000000068fecc] .g5_pfunc_switch_freq+0x1cc/0x1f0
[   20.508221] [c0000000790c3320] [c00000000068fc2c] .g5_cpufreq_target+0x2c/0x40
[   20.508226] [c0000000790c3390] [c0000000006873ec] .__cpufreq_driver_target+0x23c/0x840
[   20.508230] [c0000000790c3440] [c00000000068c798] .cpufreq_gov_performance_limits+0x18/0x30
[   20.508235] [c0000000790c34b0] [c00000000068915c] .cpufreq_start_governor+0xac/0x100
[   20.508239] [c0000000790c3530] [c00000000068a788] .cpufreq_set_policy+0x208/0x260
[   20.508244] [c0000000790c35d0] [c00000000068abdc] .cpufreq_init_policy+0x6c/0xb0
[   20.508249] [c0000000790c3940] [c00000000068ae70] .cpufreq_online+0x250/0x9d0
[   20.508253] [c0000000790c3a30] [c0000000004d76d8] .subsys_interface_register+0xb8/0x110
[   20.508258] [c0000000790c3ad0] [c000000000689bb0] .cpufreq_register_driver+0x1d0/0x250
[   20.508262] [c0000000790c3b60] [c000000000b4f8f4] .g5_cpufreq_init+0x9cc/0xa28
[   20.508267] [c0000000790c3c20] [c00000000000a98c] .do_one_initcall+0x5c/0x1d0
[   20.508271] [c0000000790c3d00] [c000000000b0f86c] .kernel_init_freeable+0x1ac/0x28c
[   20.508276] [c0000000790c3db0] [c00000000000b3bc] .kernel_init+0x1c/0x140
[   20.508280] [c0000000790c3e30] [c0000000000098f4] .ret_from_kernel_thread+0x58/0x64
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This halves the exception table size on 64-bit builds, and it allows
build-time sorting of exception tables to work on relocated kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Minor asm fixups and bits to keep the selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This macro is taken from s390, and allows more flexibility in
changing exception table format.

mpe: Put it in ppc_asm.h and only define one version using
stringinfy_in_c(). Add some empty definitions and headers to keep the
selftests happy.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If the result returned by load_unaligned_zeropad() doesn't match what we
expect we should fail the test!
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If the load unaligned zeropad test takes a SEGV which can't be handled,
we increment segv_error, print the offending NIP and then return without
taking any further action. In almost all cases this means we'll just
take the SEGV again, and loop eternally spamming the console.

Instead just abort(), it's a fatal error in the test. The test harness
will notice that the child died and print a nice message for us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We haven't seen these before, but the soon to be merged relative
exception tables support causes them to be generated.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There's no reason to #error if we include ppc_asm.h in asm files, the
ifdef already prevents any problems.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Exception handlers are aligned to 128 bytes (L1 cache) on 64s, which is
overkill. It can reduce the icache footprint of any individual exception
path. However taken as a whole, the expansion in icache footprint seems
likely to be counter-productive and cause more total misses.

Create IFETCH_ALIGN_SHIFT/BYTES, which should give optimal ifetch
alignment with much more reasonable alignment. This saves 1792 bytes
from head_64.o text with an allmodconfig build.

Other subarchitectures should define appropriate IFETCH_ALIGN_SHIFT
values if this becomes more widely used.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There are three #ifdef CONFIG_PPC_BOOK3E sections in nohash/64/pgtable.h.
And there should be no configurations possible which use nohash/64/pgtable.h
but don't also enable CONFIG_PPC_BOOK3E.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull in a version of Anton's null_syscall benchmark:
  http://ozlabs.org/~anton/junkcode/null_syscall.cSuggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@au.ibm.com>
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>