- 31 May, 2015 3 commits
-
-
Rama Kiran Kumar Indrakanti authored
Updated the documentation for spi interface. Signed-off-by:
Rama Kiran Kumar Indrakanti <indrakanti_ram@hotmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rama Kiran Kumar Indrakanti authored
spi interface for sc16is7xx is added along with Kconfig flag to enable spi or i2c, thus in a instance we can have either spi or i2c or both, in sync to the hw. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Masahiro Yamada authored
The header file, include/linux/serial_8250.h, contains references to UART_LSR_BRK_ERROR_BITS and UART_MSR_ANY_DELTA that are defined in <linux/serial_reg.h>. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
- 27 May, 2015 1 commit
-
-
Thierry Reding authored
Commit 27a4c827 ("fbcon: use the cursor blink interval provided by vt") unconditionally removes the cursor blink timer. Unfortunately that wreaks havoc under some circumstances. An easily reproducible way is to use both the framebuffer console and a debug serial port as the console output for kernel messages (e.g. "console=ttyS0 console=tty1" on the kernel command-line. Upon boot this triggers a warning from within the del_timer_sync() function because it is called from IRQ context: [ 5.070096] ------------[ cut here ]------------ [ 5.070110] WARNING: CPU: 0 PID: 0 at ../kernel/time/timer.c:1098 del_timer_sync+0x4c/0x54() [ 5.070115] Modules linked in: [ 5.070120] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-rc4-next-20150519 #1 [ 5.070123] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5.070142] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5.070156] [] (show_stack) from [] (dump_stack+0x70/0xbc) [ 5.070164] [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [ 5.070169] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 5.070174] [] (warn_slowpath_null) from [] (del_timer_sync+0x4c/0x54) [ 5.070183] [] (del_timer_sync) from [] (fbcon_del_cursor_timer+0x2c/0x40) [ 5.070190] [] (fbcon_del_cursor_timer) from [] (fbcon_cursor+0x9c/0x180) [ 5.070198] [] (fbcon_cursor) from [] (hide_cursor+0x30/0x98) [ 5.070204] [] (hide_cursor) from [] (vt_console_print+0x2a8/0x340) [ 5.070212] [] (vt_console_print) from [] (call_console_drivers.constprop.23+0xc8/0xec) [ 5.070218] [] (call_console_drivers.constprop.23) from [] (console_unlock+0x498/0x4f0) [ 5.070223] [] (console_unlock) from [] (vprintk_emit+0x1f0/0x508) [ 5.070228] [] (vprintk_emit) from [] (vprintk_default+0x24/0x2c) [ 5.070234] [] (vprintk_default) from [] (printk+0x70/0x88) After which the system starts spewing all kinds of weird and seemingly unrelated error messages. This commit fixes this by restoring the condition under which the call to fbcon_del_cursor_timer() happens. Reported-by:
Daniel Stone <daniel@fooishbar.org> Reported-by:
Kevin Hilman <khilman@kernel.org> Tested-by:
Kevin Hilman <khilman@linaro.org> Tested-by:
Scot Doyle <lkml14@scotdoyle.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Tested-by:
Andrew Vagin <avagin@virtuozzo.com> Tested-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
- 24 May, 2015 31 commits
-
-
Graeme Gregory authored
Add the necessary driver boilerplate to let the driver be used when the respective ACPI table is discovered by the ACPI subsystem. [Andre: change table name, add MODULE_DEVICE_TABLE entry and improve commit message] Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
Graeme Gregory <graeme.gregory@linaro.org> Tested-by:
Mark Langsdorf <mlangsdo@redhat.com> Tested-by:
Naresh Bhat <nbhat@cavium.com> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Andre Przywara authored
The ARM Server Base System Architecture[1] document describes a generic UART which is a subset of the PL011 UART. It lacks DMA support, baud rate control and modem status line control, among other things. The idea is to move the UART initialization and setup into the firmware (which does this job today already) and let the kernel just use the UART for sending and receiving characters. We use the recent refactoring to build a new struct uart_ops variable which points to some new functions avoiding access to the missing registers. We reuse as much existing PL011 code as possible. In contrast to the PL011 the SBSA UART does not define any AMBA or PrimeCell relations, so we go with a pretty generic probe function which only uses platform device functions. A DT binding is provided with this patch, ACPI support is added in a separate one. Signed-off-by:
-
Andre Przywara authored
The SBSA UART has a fixed baud rate and flow control setting, which cannot be changed or queried by software. Add a vendor specific property to always return fixed values when trying to read the console options. Signed-off-by:
-
Andre Przywara authored
The SBSA UART should not be enabled or disabled (it is always on), and consequently the spec lacks the UART_CR register. Add a vendor specific property to skip disabling or enabling of the UART. This will be used later by the SBSA UART support. Signed-off-by:
-
Andre Przywara authored
To avoid lines with more than 80 characters and to make the pl011_int() function more readable, move the workaround out into a separate function. Signed-off-by:
-
Andre Przywara authored
The PL011 register UART_MIS is actually a bitwise AND of the UART_RIS and the UART_MISC register. Since the SBSA UART does not include the _MIS register, use the two separate registers to get the same behaviour. Since we are inside the spinlock and we read the _IMSC register only once, there should be no race issue. Signed-off-by:
-
Andre Przywara authored
Currently the pl011_probe() function is relying on some AMBA IDs and a device tree node to initialize the driver and a port. Both features are not necessarily required for the driver: - we lack AMBA IDs in the ARM SBSA generic UART and - we lack a DT node in ACPI systems. So lets refactor the function to ease later reuse. Signed-off-by:
-
Andre Przywara authored
Split the pl011_set_termios() function into smaller chunks to allow easier reuse later when adding SBSA support. Signed-off-by:
-
Andre Przywara authored
Split the pl011_shutdown() function into smaller chunks to allow easier reuse later when adding SBSA support. Signed-off-by:
-
Andre Przywara authored
Split the pl011_startup() function into smaller chunks to allow easier reuse later when adding SBSA support. Signed-off-by:
-
Andre Przywara authored
Although we care about not unregistering the driver if there are still ports connected during the .remove callback, we do miss this check in the pl011_probe function. So if the current port allocation fails, but there are other ports already registered, we will kill those. So factor out the port removal into a separate function and use that in the probe function, too. Signed-off-by:
-
Arnd Bergmann authored
If the mediatek serial port driver is built-in, but serial console is disabled in Kconfig (e.g. when the serial driver itself is a loadable module), we get this build error: drivers/built-in.o: In function `early_mtk8250_setup': undefined reference to `early_serial8250_setup' To avoid that problem, this patch encloses the early_mtk8250_setup function in #ifdef CONFIG_SERIAL_8250_CONSOLE, the same symbol that guards the early_serial8250_setup function. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Eddie Huang <eddie.huang@mediatek.com> Signed-off-by:
-
Arnd Bergmann authored
A configuration that enables earlycon but not the core console code causes a link error: drivers/built-in.o: In function `setup_earlycon': drivers/tty/serial/earlycon.c:70: undefined reference to `uart_parse_earlycon' That error can be triggered by the newly added samsung earlycon support, which is missing a 'select' statement. As suggested by Peter Hurley, solves the problem by moving the 'select SERIAL_EARLYCON' statement to the samsung console driver option, as it is done by all other console drivers. Signed-off-by:
-
Arnd Bergmann authored
The platform_sysrq_reset_seq code was intended as a way for an embedded platform to provide its own sysrq sequence at compile time. After over two years, nobody has started using it in an upstream kernel, and the platforms that were interested in it have moved on to devicetree, which can be used to configure the sequence without requiring kernel changes. The method is also incompatible with the way that most architectures build support for multiple platforms into a single kernel. Now the code is producing warnings when built with gcc-5.1: drivers/tty/sysrq.c: In function 'sysrq_init': drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds] key = platform_sysrq_reset_seq[i]; We could fix this, but it seems unlikely that it will ever be used, so let's just remove the code instead. We still have the option to pass the sequence either in DT, using the kernel command line, or using the /sys/module/sysrq/parameters/reset_seq file. Signed-off-by:
-
Uwe Kleine-König authored
The function mctrl_gpio_init returns failure if the assignment to any member of the gpio array results in an error pointer. So there is no need to check for such error values in the other functions. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes. Signed-off-by:
-
Geert Uytterhoeven authored
Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes. Signed-off-by:
-
Geert Uytterhoeven authored
Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Sebastian Andrzej Siewior authored
The currently in-use port->startup and port->shutdown are "okay". The startup part for instance does the tiny omap extra part and invokes serial8250_do_startup() for the remaining pieces. The workflow in serial8250_do_startup() is okay except for the part where UART_RX is read without a check if there is something to read. I tried to workaround it in commit 0aa525d1 ("tty: serial: 8250_core: read only RX if there is something in the FIFO") but then reverted it later in commit ca8bb4ae ("serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO""). This is the second attempt to get it to work on older OMAPs without breaking other chips this time Peter Hurley suggested to pull in the few needed lines from serial8250_do_startup() and drop everything else that is not required including making it simpler like using just request_irq() instead the chain handler like it is doing now. So lets try that. Fixes: ca8bb4ae ("serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO"") Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Jon Hunter authored
If the call to dmaengine_slave_config() fails, then the DMA buffer will not be freed/unmapped. Fix this by moving the code that stores the address of the buffer in the tegra_uart_port structure to before the call to dmaengine_slave_config(). Reported-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
-
Qipan Li authored
it seems this is a more typical behaviour from reviewing other console drivers. Signed-off-by:
Qipan Li <Qipan.Li@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Qipan Li authored
Signed-off-by:
-
Qipan Li authored
add overrun error's flag mark and parity's counter, we can show the statistic from procfs node. BTW, let the indentation of stick bits configuration look better. Signed-off-by:
-
Qipan Li authored
In special condition, when cpu schedule into rx_tmo_process_tl or rx_dma_complete_tl and all the receive dma tasks have done, it will go into endless loop because no dma task cookie status be changed. Signed-off-by:
-
Qipan Li authored
>From HW spec, when rxfifo's data is less than AFC_RX_THD(RX threshhold), RTS signal is active. otherwise, RTS signal is inactive. Crrently the RX threshhold is set as zero, so RTS has no chance to be active. This patch replaces the default 0 by a positive number. Signed-off-by:
-
Qipan Li authored
differentiate difference port types by re-defining the status MARCO or putting HW differences into private data of the related ports. Signed-off-by:
-
Masahiro Yamada authored
This comment does not reflect the actual code. It should be 57600, not 56000. Signed-off-by:
-
Masahiro Yamada authored
This comment does not reflect the actual code. It should be 57600, not 56000. Signed-off-by:
-
Nicolas Ferre authored
In RS485 mode, we may want to set the delay_rts_after_send value to 0. In the datasheet, the 0 value is said to "disable" the Transmitter Timeguard but this is exactly the expected behavior if we want no delay... Moreover, if the value was set to non-zero value by device-tree or earlier ioctl command, it was impossible to change it back to zero. Reported-by:
Sami Pietikäinen <Sami.Pietikainen@wapice.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org # 3.2+ Signed-off-by:
-
- 19 May, 2015 1 commit
-
-
Dave Martin authored
In commit 02730d3c (Merge 4.1-rc4 into tty-next), git mismerged some lines, reintroducing a reference to the removed field uart_amba_port.tx_irq_seen. This causes a build failure. This patch removes the mismerged lines, restoring the code to what was in tty-next (which was the intention). Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
-
- 18 May, 2015 4 commits
-
-
Greg Kroah-Hartman authored
This resolves some tty driver merge issues. Signed-off-by: -
Linus Torvalds authored
-
Peter Zijlstra authored
Two watchdog changes that came through different trees had a non conflicting conflict, that is, one changed the semantics of a variable but no actual code conflict happened. So the merge appeared fine, but the resulting code did not behave as expected. Commit 195daf66 ("watchdog: enable the new user interface of the watchdog mechanism") changes the semantics of watchdog_user_enabled, which thereafter is only used by the functions introduced by b3738d29 ("watchdog: Add watchdog enable/disable all functions"). There further appears to be a distinct lack of serialization between setting and using watchdog_enabled, so perhaps we should wrap the {en,dis}able_all() things in watchdog_proc_mutex. This patch fixes a s2r failure reported by Michal; which I cannot readily explain. But this does make the code internally consistent again. Reported-and-tested-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
-
