- 13 Jun, 2014 1 commit
-
-
Christoph Hellwig authored
If we need to drain a queue we need to run all queues, even if they are marked stopped to make sure the driver has a chance to error out on all queued requests. This fixes surprise removal with scsi-mq. Reported-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Jens Axboe <axboe@fb.com>
-
- 11 Jun, 2014 14 commits
-
-
Matias Bjørling authored
blk-mq issues async requests through kblockd. To issue a work request on a specific CPU, kblockd_schedule_delayed_work_on is used. However, the specific CPU choice may not be honored, if the power_efficient option for workqueues is set. blk-mq requires that we have strict per-cpu scheduling, so it wont work properly if kblockd is marked POWER_EFFICIENT and power_efficient is set. Remove the kblockd WQ_POWER_EFFICIENT flag to prevent this behavior. This essentially reverts part of commit 695588f9, which added the WQ_POWER_EFFICIENT marker to kblockd. Signed-off-by:
Matias Bjørling <m@bjorling.me> Signed-off-by:
-
Mike Snitzer authored
'use_mq' is not the name of the module parameter, 'queue_mode' is. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
elv_abort_queue has no callers, and blk_abort_flushes is only called by elv_abort_queue. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull part two of ARM SoC updates from Arnd Bergmann: "This is a small follow-up to the larger ARM SoC updates merged last week, almost entirely for the keystone platform. The main change here is to use the new dma-ranges parsing code that came in through Russell's ARM tree. This allows the keystone platform to do cache-coherent DMA and to finally support all the available physical memory when LPAE is enabled. Aside from this, the keystone reset driver has been rewritten, and there is a small bug fix to allow building the orion5x platform again" * tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: Drop use of meminfo since its not available anymore ARM: orion5x: fix mvebu_mbus_dt_init call ARM: configs: keystone: enable reset driver support ARM: dts: keystone: update reset node to work with reset driver ARM: keystone: remove redundant reset stuff ARM: keystone: Update the dma offset for non-dt platform devices ARM: keystone: Switch over to coherent memory address space ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80) ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull reiserfs and ext3 changes from Jan Kara: "Big reiserfs cleanup from Jeff, an ext3 deadlock fix, and some small cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits) reiserfs: Fix compilation breakage with CONFIG_REISERFS_CHECK ext3: Fix deadlock in data=journal mode when fs is frozen reiserfs: call truncate_setsize under tailpack mutex fs/jbd/revoke.c: replace shift loop by ilog2 reiserfs: remove obsolete __constant_cpu_to_le32 reiserfs: balance_leaf refactor, split up balance_leaf_when_delete reiserfs: balance_leaf refactor, format balance_leaf_finish_node reiserfs: balance_leaf refactor, format balance_leaf_new_nodes_paste reiserfs: balance_leaf refactor, format balance_leaf_paste_right reiserfs: balance_leaf refactor, format balance_leaf_insert_right reiserfs: balance_leaf refactor, format balance_leaf_paste_left reiserfs: balance_leaf refactor, format balance_leaf_insert_left reiserfs: balance_leaf refactor, pull out balance_leaf{left, right, new_nodes, finish_node} reiserfs: balance_leaf refactor, pull out balance_leaf_finish_node_paste reiserfs: balance_leaf refactor pull out balance_leaf_finish_node_insert reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_paste reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_insert reiserfs: balance_leaf refactor, pull out balance_leaf_paste_right reiserfs: balance_leaf refactor, pull out balance_leaf_insert_right reiserfs: balance_leaf refactor, pull out balance_leaf_paste_left ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs updates from Chris Mason: "The biggest change here is Josef's rework of the btrfs quota accounting, which improves the in-memory tracking of delayed extent operations. I had been working on Btrfs stack usage for a while, mostly because it had become impossible to do long stress runs with slab, lockdep and pagealloc debugging turned on without blowing the stack. Even though you upgraded us to a nice king sized stack, I kept most of the patches. We also have some very hard to find corruption fixes, an awesome sysfs use after free, and the usual assortment of optimizations, cleanups and other fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (80 commits) Btrfs: convert smp_mb__{before,after}_clear_bit Btrfs: fix scrub_print_warning to handle skinny metadata extents Btrfs: make fsync work after cloning into a file Btrfs: use right type to get real comparison Btrfs: don't check nodes for extent items Btrfs: don't release invalid page in btrfs_page_exists_in_range() Btrfs: make sure we retry if page is a retriable exception Btrfs: make sure we retry if we couldn't get the page btrfs: replace EINVAL with EOPNOTSUPP for dev_replace raid56 trivial: fs/btrfs/ioctl.c: fix typo s/substract/subtract/ Btrfs: fix leaf corruption after __btrfs_drop_extents Btrfs: ensure btrfs_prev_leaf doesn't miss 1 item Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled btrfs: free delayed node outside of root->inode_lock btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAX Btrfs: fix transaction leak during fsync call btrfs: Avoid trucating page or punching hole in a already existed hole. Btrfs: update commit root on snapshot creation after orphan cleanup Btrfs: ioctl, don't re-lock extent range when not necessary Btrfs: avoid visiting all extent items when cloning a range ...
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs updates from Dave Chinner: "This update contains: - cleanup removing unused function args - rework of the filestreams allocator to use dentry cache parent lookups - new on-disk free inode btree and optimised inode allocator - various bug fixes - rework of internal attribute API - cleanup of superblock feature bit support to remove historic cruft - more fixes and minor cleanups - added a new directory/attribute geometry abstraction - yet more fixes and minor cleanups" * tag 'xfs-for-linus-3.16-rc1' of git://oss.sgi.com/xfs/xfs: (86 commits) xfs: fix xfs_da_args sparse warning in xfs_readdir xfs: Fix rounding in xfs_alloc_fix_len() xfs: tone down writepage/releasepage WARN_ONs xfs: small cleanup in xfs_lowbit64() xfs: kill xfs_buf_geterror() xfs: xfs_readsb needs to check for magic numbers xfs: block allocation work needs to be kswapd aware xfs: remove redundant geometry information from xfs_da_state xfs: replace attr LBSIZE with xfs_da_geometry xfs: pass xfs_da_args to xfs_attr_leaf_newentsize xfs: use xfs_da_geometry for block size in attr code xfs: remove mp->m_dir_geo from directory logging xfs: reduce direct usage of mp->m_dir_geo xfs: move node entry counts to xfs_da_geometry xfs: convert dir/attr btree threshold to xfs_da_geometry xfs: convert m_dirblksize to xfs_da_geometry xfs: convert m_dirblkfsbs to xfs_da_geometry xfs: convert directory segment limits to xfs_da_geometry xfs: convert directory db conversion to xfs_da_geometry xfs: convert directory dablk conversion to xfs_da_geometry ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "Final small batch of fixes to be included before -rc1. Some general cleanups in here as well, but some of the blk-mq fixes we need for the NVMe conversion and/or scsi-mq. The pull request contains: - Support for not merging across a specified "chunk size", if set by the driver. Some NVMe devices perform poorly for IO that crosses such a chunk, so we need to support it generically as part of request merging avoid having to do complicated split logic. From me. - Bump max tag depth to 10Ki tags. Some scsi devices have a huge shared tag space. Before we failed with EINVAL if a too large tag depth was specified, now we truncate it and pass back the actual value. From me. - Various blk-mq rq init fixes from me and others. - A fix for enter on a dying queue for blk-mq from Keith. This is needed to prevent oopsing on hot device removal. - Fixup for blk-mq timer addition from Ming Lei. - Small round of performance fixes for mtip32xx from Sam Bradshaw. - Minor stack leak fix from Rickard Strandqvist. - Two __init annotations from Fabian Frederick" * 'for-linus' of git://git.kernel.dk/linux-block: block: add __init to blkcg_policy_register block: add __init to elv_register block: ensure that bio_add_page() always accepts a page for an empty bio blk-mq: add timer in blk_mq_start_request blk-mq: always initialize request->start_time block: blk-exec.c: Cleaning up local variable address returnd mtip32xx: minor performance enhancements blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init() blk-mq: don't allow queue entering for a dying queue blk-mq: bump max tag depth to 10K tags block: add blk_rq_set_block_pc() block: add notion of a chunk size for request merging -
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md updates from Neil Brown: "Assorted md fixes for 3.16 Mostly performance improvements with a few corner-case bug fixes" * tag 'md/3.16' of git://neil.brown.name/md: raid5: speedup sync_request processing md/raid5: deadlock between retry_aligned_read with barrier io raid5: add an option to avoid copy data from bio to stripe cache md/bitmap: remove confusing code from filemap_get_page. raid5: avoid release list until last reference of the stripe md: md_clear_badblocks should return an error code on failure. md/raid56: Don't perform reads to support writes until stripe is ready. md: refuse to change shape of array if it is active but read-only
-
Jan Kara authored
There was a bug in debug printout when CONFIG_REISERFS_CHECK was enabled so one of the assertions in do_balan.c didn't compile. Fix it. Fixes: 0080e9f9Signed-off-by:
Jan Kara <jack@suse.cz>
-
Brian Norris authored
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: "This contains: - addition of the Intel MID watchdog - removal of W83697HF and W83697UG drivers (code was merged into w83627hf_wdt driver) - addition of Armada 375/380 SoC support - conversion of imx2_wdt to regmap API and to watchdog core API - lots of other small improvements and fixes" [ Wim was also tagged by gmail as a spammer, but not delayed by days unlike Ben ] * git://www.linux-watchdog.org/linux-watchdog: (25 commits) x86: intel-mid: add watchdog platform code for Merrifield watchdog: add Intel MID watchdog driver support watchdog: sp805: Set watchdog_device->timeout from ->set_timeout() booke/watchdog: refine and clean up the codes watchdog: iop_wdt only builds for mach-iop13xx watchdog: Remove drivers for W83697HF and W83697UG watchdog: w83627hf_wdt: Add early_disable module parameter ARM: mvebu: Add A375/A380 watchdog binding documentation watchdog: orion: Add Armada 375/380 SoC support watchdog: orion: Introduce per-SoC enabled() function watchdog: orion: Introduce per-SoC stop() function watchdog: orion: Remove unneeded atomic access watchdog: orion: Introduce a SoC-specific RSTOUT mapping watchdog: orion: Move the register ioremap'ing to its own function watchdog: xilinx: Make of_device_id array const watchdog: imx2_wdt: convert to watchdog core api watchdog: imx2_wdt: convert to use regmap API. watchdog: imx2_wdt: Sort the header files alphabetically watchdog: ath79_wdt: switch to clk_prepare/clk_disable watchdog: ath79_wdt: avoid spurious restarts on AR934x ... -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Ben Herrenschmidt: "Here is the bulk of the powerpc changes for this merge window. It got a bit delayed in part because I wasn't paying attention, and in part because I discovered I had a core PCI change without a PCI maintainer ack in it. Bjorn eventually agreed it was ok to merge it though we'll probably improve it later and I didn't want to rebase to add his ack. There is going to be a bit more next week, essentially fixes that I still want to sort through and test. The biggest item this time is the support to build the ppc64 LE kernel with our new v2 ABI. We previously supported v2 userspace but the kernel itself was a tougher nut to crack. This is now sorted mostly thanks to Anton and Rusty. We also have a fairly big series from Cedric that add support for 64-bit LE zImage boot wrapper. This was made harder by the fact that traditionally our zImage wrapper was always 32-bit, but our new LE toolchains don't really support 32-bit anymore (it's somewhat there but not really "supported") so we didn't want to rely on it. This meant more churn that just endian fixes. This brings some more LE bits as well, such as the ability to run in LE mode without a hypervisor (ie. under OPAL firmware) by doing the right OPAL call to reinitialize the CPU to take HV interrupts in the right mode and the usual pile of endian fixes. There's another series from Gavin adding EEH improvements (one day we *will* have a release with less than 20 EEH patches, I promise!). Another highlight is the support for the "Split core" functionality on P8 by Michael. This allows a P8 core to be split into "sub cores" of 4 threads which allows the subcores to run different guests under KVM (the HW still doesn't support a partition per thread). And then the usual misc bits and fixes ..." [ Further delayed by gmail deciding that BenH is a dirty spammer. Google knows. ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits) powerpc/powernv: Add missing include to LPC code selftests/powerpc: Test the THP bug we fixed in the previous commit powerpc/mm: Check paca psize is up to date for huge mappings powerpc/powernv: Pass buffer size to OPAL validate flash call powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC() powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC() powerpc/powernv: Set memory_block_size_bytes to 256MB powerpc: Allow ppc_md platform hook to override memory_block_size_bytes powerpc/powernv: Fix endian issues in memory error handling code powerpc/eeh: Skip eeh sysfs when eeh is disabled powerpc: 64bit sendfile is capped at 2GB powerpc/powernv: Provide debugfs access to the LPC bus via OPAL powerpc/serial: Use saner flags when creating legacy ports powerpc: Add cpu family documentation powerpc/xmon: Fix up xmon format strings powerpc/powernv: Add calls to support little endian host powerpc: Document sysfs DSCR interface powerpc: Fix regression of per-CPU DSCR setting powerpc: Split __SYSFS_SPRSETUP macro arch: powerpc/fadump: Cleaning up inconsistent NULL checks ...
-
- 10 Jun, 2014 25 commits
-
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Matthew Garrett: "Very little of excitement here - the most significant is a new driver for detecting device freefall on Dells, other than that it's pretty much entirely minor fixes for specific machines" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: hp-wmi: Enable hotkeys on some systems thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540 platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810) ideapad_laptop: Introduce the use of the managed version of kzalloc platform/x86: Fix run-time dependencies of OLPC drivers platform: x86: asus-wmi.c: Cleaning up uninitialized variables ix86/mid/thermal: Introduce the use of the managed version of kzalloc platform x86 Kconfig: Refer to the laptop list in the Compal driver help Documentation: Add list of laptop models supported by the Compal driver ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11 asus-wmi: Set WAPF to 4 for Asus X550CA alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status alienware-wmi: Update WMAX brightness method limit to 15 pvpanic: Set high notifier priority platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models. toshiba_acpi: Add alternative keymap support for Satellite M840 platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
-
Kyle Evans authored
This is a third attempt to enable these buttons. The new variable being commit 997daa1b (i.e. hp-wmi: detect "2009 BIOS or later"). Older systems that do not have the 2009 BIOS query method respond with a dummy value, in this case 4. Using that, we can target a fairly narrow group of systems. i.e. old enough to not have HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9. This group may be further limited if some systems respond with something other than 4 to non-existant feature queries. Signed-off-by:
Kyle Evans <kvans32@gmail.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com>
-
Hans de Goede authored
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12 keys should be mapped to: control-panel, search, show-all-windows and Computer. These keys generate the sofar unused 28 - 31 hotkey scancodes. For the first 2 this nicely matches the icons on the keys, for the latter 2 the icons are somewhat creative, which is why I ended up looking them up in the user manual. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Pali Rohár authored
This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which can be found on Dell Latitude laptops. Driver register /dev/freefall misc device which has same interface as driver hp_accel freefall driver. So any existing applications for HP freefall sensor /dev/freefall will work for with this new driver for Dell Latitude laptops too. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Cc: Sonal Santan <sonal.santan@gmail.com> Tested-By:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-By:
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The label sysfs_failed is removed as it is no longer required. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by:Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Jean Delvare authored
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers already do. Add COMPILE_TEST as an alternative for both xo1-rfkill and xo15-ebook, to increase the build testing coverage. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Rickard Strandqvist authored
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: -
Ismael Luceno authored
Signed-off-by:
Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by:
-
Ismael Luceno authored
Signed-off-by:
-
Hans de Goede authored
The Lenovo Yoga 2 11 always reports everything as blocked, causing userspace to not even try to use the wlan / bluetooth even though they work fine. Note this patch also removes the "else priv->rfk[i] = NULL;" bit of the rfkill initialization, it is not necessary as the priv struct is allocated with kzalloc. Reported-and-tested-by:
Vincent Gerris <vgerris@gmail.com> Signed-off-by:
-
Andreas Utterberg authored
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational. Signed-off-by:
Andreas Utterberg <andreas.utterberg@thundera.se> Signed-off-by:
-
Mario Limonciello authored
Since there are now multiple HDMI attributes associated with the WMAX method, create a sysfs group for them instead. Signed-off-by:
Mario Limonciello <mario_limonciello@dell.com> Signed-off-by:
-
Linus Torvalds authored
Merge leftovers from Andrew Morton: "A few leftovers: ocfs2, gcov, RTC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rtc: s5m: consolidate two device type switch statements rtc: s5m: add support for S2MPS14 RTC rtc: s5m: support different register layout rtc: s5m: use shorter time of register update rtc: s5m: remove undocumented time init on first boot mfd/rtc: sec/s5m: rename SEC* symbols to S5M gcov: add support for GCC 4.9 ocfs2/o2net: incorrect to terminate accepting connections loop upon rejecting an invalid one
-
Krzysztof Kozlowski authored
In probe the configuration of driver for different chipsets was done in two switch (pdata->device_type) statements. Consolidate them into one switch statement to increase code readability. Additionally check the return value of regmap_irq_get_virq and exit probe on error. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Kozlowski authored
Add support for S2MPS14 to the rtc-s5m driver. Differences in S2MPS14 (in comparison to S5M8767): - Layout of registers - Lack of century support for time and alarms (7 registers used for storing time/alarm) - Two buffer control registers: WUDR and RUDR - No register for enabling writing time - RTC interrupts are reported in main PMIC I2C device Signed-off-by:
-
Krzysztof Kozlowski authored
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Add a map of registers used by the driver which differ between the chipsets (S5M876X and S2MPS14). 2. Move code of checking for alarm pending to separate function. Signed-off-by:
-
Krzysztof Kozlowski authored
Set the time needed for updating alarm and time registers to 0.45 ms. The default is 7.32 ms which is too long and leads to warnings when setting alarm or time: s5m-rtc: waiting for UDR update, reached max number of retries Signed-off-by:
-
Krzysztof Kozlowski authored
Remove the code for initializing time if this is first boot. The code for detecting first boot uses undocumented field RTC_TCON in RTC_UDR_CON register. According to S5M8767's datasheet this field is reserved. On S2MPS14 it is not documented at all. On device first boot the registers will be initialized with reset value (2000-01-01 00:00:00). The code might work on S5M8763 but still this does not look like a task for RTC driver. Signed-off-by:
-
Krzysztof Kozlowski authored
Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver: 1. Rename SEC* symbols to S5M. 2. Add S5M prefix to some of defines which are different between S5M876X and S2MPS14. This is only a rename-like patch, new code is not added. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Yuan Pengfei authored
This patch handles the gcov-related changes in GCC 4.9: A new counter (time profile) is added. The total number is 9 now. A new profile merge function __gcov_merge_time_profile is added. See gcc/gcov-io.h and libgcc/libgcov-merge.c For the first change, the layout of struct gcov_info is affected. For the second one, a dummy function is added to kernel/gcov/base.c similarly. Signed-off-by:
Yuan Pengfei <coolypf@qq.com> Acked-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Tariq Saeed authored
When o2net-accept-one() rejects an illegal connection, it terminates the loop picking up the remaining queued connections. This fix will continue accepting connections till the queue is emtpy. Addresses Orabug 17489469. Signed-off-by:
Tariq Saseed <tariq.x.saeed@oracle.com> Signed-off-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Sasha Levin authored
Right now when people try to report issues in the kernel they send stack dumps to eachother, which looks something like this: [ 6.906437] [<ffffffff811f0e90>] ? backtrace_test_irq_callback+0x20/0x20 [ 6.907121] [<ffffffff84388ce8>] dump_stack+0x52/0x7f [ 6.907640] [<ffffffff811f0ec8>] backtrace_regression_test+0x38/0x110 [ 6.908281] [<ffffffff813596a0>] ? proc_create_data+0xa0/0xd0 [ 6.908870] [<ffffffff870a8040>] ? proc_modules_init+0x22/0x22 [ 6.909480] [<ffffffff810020c2>] do_one_initcall+0xc2/0x1e0 [...] However, most of the text you get is pure garbage. The only useful thing above is the function name. Due to the amount of different kernel code versions and various configurations being used, the kernel address and the offset into the function are not really helpful in determining where the problem actually occured. Too often the result of someone looking at a stack dump is asking the person who sent it for a translation for one or more 'addr2line' translations. Which slows down the entire process of debugging the issue (and really annoying). The decode_stacktrace script is an attempt to make the output more useful and easy to work with by translating all kernel addresses in the stack dump into line numbers. Which means that the stack dump would look like this: [ 635.148361] dump_stack (lib/dump_stack.c:52) [ 635.149127] warn_slowpath_common (kernel/panic.c:418) [ 635.150214] warn_slowpath_null (kernel/panic.c:453) [ 635.151031] _oalloc_pages_slowpath+0x6a/0x7d0 [ 635.152171] ? zone_watermark_ok (mm/page_alloc.c:1728) [ 635.152988] ? get_page_from_freelist (mm/page_alloc.c:1939) [ 635.154766] __alloc_pages_nodemask (mm/page_alloc.c:2766) It's pretty obvious why this is better than the previous stack dump before. Usage is pretty simple: ./decode_stacktrace.sh [vmlinux] [base path] Where vmlinux is the vmlinux to extract line numbers from and base path is the path that points to the root of the build tree, for example: ./decode_stacktrace.sh vmlinux /home/sasha/linux/ < input.log > output.log The stack trace should be piped through it (I, for example, just pipe the output of the serial console of my KVM test box through it). Signed-off-by:Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Highlights include: - massive cleanup of the NFS read/write code by Anna and Dros - support multiple NFS read/write requests per page in order to deal with non-page aligned pNFS striping. Also cleans up the r/wsize < page size code nicely. - stable fix for ensuring inode is declared uptodate only after all the attributes have been checked. - stable fix for a kernel Oops when remounting - NFS over RDMA client fixes - move the pNFS files layout driver into its own subdirectory" * tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits) NFS: populate ->net in mount data when remounting pnfs: fix lockup caused by pnfs_generic_pg_test NFSv4.1: Fix typo in dprintk NFSv4.1: Comment is now wrong and redundant to code NFS: Use raw_write_seqcount_begin/end int nfs4_reclaim_open_state xprtrdma: Disconnect on registration failure xprtrdma: Remove BUG_ON() call sites xprtrdma: Avoid deadlock when credit window is reset SUNRPC: Move congestion window constants to header file xprtrdma: Reset connection timeout after successful reconnect xprtrdma: Use macros for reconnection timeout constants xprtrdma: Allocate missing pagelist xprtrdma: Remove Tavor MTU setting xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting xprtrdma: Reduce the number of hardway buffer allocations xprtrdma: Limit work done by completion handler xprtrmda: Reduce calls to ib_poll_cq() in completion handlers xprtrmda: Reduce lock contention in completion handlers xprtrdma: Split the completion queue xprtrdma: Make rpcrdma_ep_destroy() return void ... -
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC update from Chris Ball: "MMC highlights for 3.16: Core: - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v - if card init at 3.3v doesn't work, try 1.8v and 1.2v too Drivers: - moxart: New driver for MOXA ART SoCs - rtsx_usb_sdmmc: New driver for Realtek USB card readers - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support - sunxi: New driver for Allwinner sunxi SoCs - usdhi6rol0: New driver for Renesas SD/SDIO controller" * tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits) mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller mmc: sdhci-of-esdhc: Fixup compile error mmc: tegra: fix reporting of base clock frequency mmc: tegra: disable UHS modes mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler MAINTAINERS: mmc: Add path to git tree mmc: dove: fix missing MACH_DOVE dependency mmc: sdhci: SD tuning is broken for some controllers mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support mmc: omap_hsmmc: split omap-dma header file mmc: omap_hsmmc: fix cmd23 multiblock read/write mmc: omap_hsmmc: use devm_ioremap_resource mmc: omap_hsmmc: use devm_request_threaded_irq mmc: omap_hsmmc: use devm_request_irq mmc: omap_hsmmc: use devm_clk_get mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value mmc: omap: Use DIV_ROUND_UP instead of open coded ...
-
