- 11 Dec, 2009 40 commits
-
-
Michal Nazarewicz authored
Changed definition of usb_composite_unregister() function removing __exit declaration. This way, the function is included even if the whole code was not compiled as module. This is required if a compiled-in code would like to unregister a composite gadget. Signed-off-by:
Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Michal Nazarewicz authored
Most of the data from fsg_dev have been moved to fsg_common structure. The fsg_dev structure holds only endpoint dependent data. The fsg_common structure has a fsg pointer which points to active fsg_dev structure -- endpoints are referenced via this pointer. This fixes the problem of several threads created when a single instance of MSF is used in several USB configurations. Signed-off-by:
-
Michal Nazarewicz authored
Fixed most of the errors and warnings in f_mass_storage.c and storage_common.c reported by checkpatch.pl as well as updated comments. Signed-off-by:
-
Michal Nazarewicz authored
A two fsg_config fields were added: * lun_name_format which lets one specify format of a name used when registering LUN devices. It is useful if there would be ever need for two MSFs to be used in a single composite gadget (as opposed to single MSF in two configuration); and * thread_name which lets one specify the name of a kernel thread used by MSF. This is not required since two or more threads can have the same name but nevertheless it's here for consistency. Signed-off-by:
-
Michal Nazarewicz authored
Removed all references to mod_data in f_mass_storage.c and instead created fsg_config structure fsg_common_init() takes as an argument -- it stores all configuration options that were previously taken from mod_data. Moreover, The fsg_config structure allows per-LUN configuration of removable and CD-ROM emulation. Module parameters are handled by defining an object of fsg_module_parameters structure and then declaring module parameters via FSG_MODULE_PARAMETERS() macro. It adds proper declarations to the code making specified object be populated from module parameters. To use values stored there one may use either fsg_config_from_params() which will will a fsg_config structure with values taken from fsg_module_parameters structure or fsg_common_from_params() which will initialise fsg_common structure directly. Signed-off-by:
-
Michal Nazarewicz authored
The f_mass_storage.c has been changed into a composite function. mass_storage.c file has been introduced which defines a g_mass_storage gadget based on composite framework. Signed-off-by:
-
Sarah Sharp authored
It's not surprising that the transfer request buffer (TRB) physical to virtual address translation function has bugs in it, since I wrote most of it at 4am last October. Add a test suite to check the TRB math. This runs at memory initialization time, and causes the driver to fail to load if the TRB math fails. Please excuse the excessively long lines in the test vectors; they can't really be made shorter and still be readable. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Vikram Pandita authored
Allow module_param to be writeable. This allows us to change the parameter if usbtest is built-in in the kernel. Signed-off-by:
Vikram Pandita <vikram.pandita@ti.com> Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Dan Carpenter authored
Add a missing goto. We dereference usb_class on the next line. Found by smatch static checker. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
td and dev can not be null. Also they are dereferenced in list_for_each_entry_safe and list_for_each before the check happens so we would have an oops if it were possible for them to be null. Found using the smatch static checker. Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Alan Stern authored
This patch (as1302) removes the auto_pm flag from struct usb_device. The flag's only purpose was to distinguish between autosuspends and external suspends, but that information is now available in the pm_message_t argument passed to suspend methods. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
H Hartley Sweeten authored
Quiet the following sparse noise: warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Zhang Le authored
Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by:
Zhang Le <r0bertz@gentoo.org> Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
Bart Hartgers <bart.hartgers@gmail.com> Cc: Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
bart.hartgers@gmail.com authored
Signed-off-by:
-
Russ Dill authored
USB drivers that create character devices call usb_register_dev in their probe function. This associates the usb_interface device with that minor number and creates the character device and announces it to the world. However, the driver's probe function is called before the new usb_interface is added to the driver's klist_devices. This is a problem because userspace will respond to the character device creation announcement by opening the character device. The driver's open function will the call usb_find_interface to find the usb_interface associated with that minor number. usb_find_interface will walk the driver's list of devices and find the usb_interface with the matching minor number. Because the announcement happens before the usb_interface is added to the driver's klist_devices, a race condition exists. A straightforward fix is to walk the list of devices on usb_bus_type instead since the device is added to that list before the announcement occurs. bus_find_device calls get_device to bump the reference count on the found device. It is arguable that the reference count should be dropped by the caller of usb_find_interface instead of usb_find_interface, however, the current users of usb_find_interface do not expect this. Signed-off-by:
Russ Dill <Russ.Dill@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Roel Kluin authored
istl_flip is a signed bitfield of one bit so it can be -1 or 0. However in drivers/usb/host/isp1362-hcd.c:1103: finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[isp1362_hcd->istl_flip]); So if isp1362_hcd->istl_flip is set, the 2nd argument becomes &isp1362_hcd->istl_queue[-1], which is invalid. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Nathaniel McCallum authored
This patch fixes a bug when incrementing/decrementing on a BCD formatted integer (i.e. 0x09++ should be 0x10 not 0x0A). It just adds a function for incrementing/decrementing BCD integers by converting to decimal, doing the increment/decrement and then converting back to BCD. Signed-off-by:
Nathaniel McCallum <nathaniel@natemccallum.com> Signed-off-by:
-
Nathaniel McCallum authored
The current code to generate usb modaliases from usb_device_id assumes that the device's bcdDevice descriptor will actually be in BCD format. While this should be a sane assumption, some devices don't follow spec and just use plain old hex. This causes drivers for these devices to generate invalid modalias lines which will never actually match for the hardware. The following patch adds hex support for bcdDevice in file2alias.c by detecting when a driver uses a hex formatted bcdDevice_(lo|hi) and adjusts the output to hex format accordingly. Drivers for devices which have bcdDevice conforming to BCD will have no change in modalias output. Drivers for devices which don't conform (i.e. ibmcam) should now generate valid modaliases. EXAMPLE OUTPUT (ibmcam; space added to highlight change) Old: usb:v0545p800D d030[10-9] dc*dsc*dp*ic*isc*ip* New: usb:v0545p800D d030a dc*dsc*dp*ic*isc*ip* Signed-off-by: -
Adrian Taylor authored
Nokia S60 phones expose two ACM channels. The first is a modem and is picked up by the standard AT-command interface information in the CDC-ACM driver. The second is marked as having a vendor-specific protocol. Normally, we don't expose those as ttys. (On some other devices, they may be claimed by the rndis_host driver and used as a network interface). But on S60 this second ACM channel is the way that third-party S60 application developers are expected to communicate over USB. It acts as a serial device at the S60 end, and so it should on Linux too. The list of devices is largely derived from: http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs and includes only the S60 3rd Edition+ devices documented there. There are many devices for which the USB device ID is not documented, including: Nokia 6290 Nokia E63 Nokia 5630 XpressMusic Nokia 5730 XpressMusic Nokia 6710 Navigator Nokia 6720 classic Nokia 6730 Classic Nokia 6760 slide Nokia 6790 slide Nokia 6790 Surge Nokia E52 Nokia E55 Nokia E71x (AT&T) Nokia E72 Nokia E75 Nokia E75 US+LTA variant Nokia N79 Nokia N86 8MP Nokia 5230 (RM-588) Nokia 5230 (RM-594) Nokia 5530 XpressMusic Nokia 5530 XpressMusic (china) Nokia 5800 XM Nokia N97 (RM-506) Nokia N97 mini Nokia X6 It would be good to add those subsequently. Signed-off-by:
Adrian Taylor <aat@realvnc.com> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Larry Finger authored
In map_urb_for_dma(), the DMA address returned by dma_map_single() is not checked to determine if it is legal. This lack of checking contributed to a problem with the libertas wireless driver (http://marc.info/?l=linux-wireless&m=125695331205062&w=2). The difficulty was not detected until the buffer was unmapped. By this time memory corruption had occurred. The situation is fixed by testing the returned DMA address, and returning -EAGAIN if the address is invalid. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Anand Gadiyar authored
usb: ehci: Allow EHCI to be built on OMAP3 OMAP3 chips have a built-in EHCI controller. The recently introduced omap ehci-hcd driver missed out on selecting USB_ARCH_HAS_EHCI in Kconfig. Without this, the driver cannot be built. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Alan Stern authored
This patch (as1301) adds support to usbmon for scatter-gather URBs. The text interface looks at only the first scatterlist element, since it never copies more than 32 bytes of data anyway. The binary interface copies as much data as possible up to the first non-addressable buffer. Signed-off-by:
-
Alan Stern authored
This patch (as1300) adds native scatter-gather support to ehci-hcd. Signed-off-by:
-
Elina Pasheva authored
This patch deals with reducing the memory footprint for sierra driver. This optimization is aimed for embedded software customers. Some sierra modems can expose upwards of 7 USB interfaces, each possibly offering different services. In general, interfaces used for the exchange of wireless data require much higher throughput, hence require more memory (i.e. more URBs) than lower performance interfaces. URBs used for the IN direction are pre-allocated by the driver and this patch introduces a way to configure the number of IN URBs allocated on a per-interface basis. Interfaces with lower throughput requirements receive fewer URBs, thereby reducing the RAM memory consumed by the driver. NOTE1: This driver has always pre-allocated URBs for the IN direction. NOTE2: The number of URBs pre-allocated for the low-performance interfaces has already been extensively tested in previous versions of this driver. We also added the capability to log function calls by adding DEBUG flag. Please note that this flag is commented out because this is the default state for it. Signed-off-by:
Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by:
-
Michal Nazarewicz authored
Without Interface Association Descriptor, the CDC serial and RNDIS functions did not work correctly when added to a composite gadget with other functions. This is because, it defined two interfaces and some hosts tried to treat each interface separatelly. Signed-off-by:
-
Michal Nazarewicz authored
Moved code initialising fsg_common structure to fsg_common_init() function which is called from fsg_bind(). Moreover, changed reference counting mechanism: fsg_common has a reference counter which counts how many fsg_dev structures uses it. When this reaches zero fsg_common_release() is run which unregisters LUN devices and frees memory. fsg_common_init() takes pointer to fsg_common structure as an argument. If it is NULL function allocates storage otherwise uses pointed to memory (handy if fsg_common is a field of another structure or a static variable). fsg_common_release() will free storage only if free_storage_on_release is set -- it is initialised by fsg_common_init(): set if allocation was done, unset otherwise (one may overwrite it of course). Signed-off-by:
-
Michal Nazarewicz authored
Using version of fsg_buffhd structure with buf field being an array of characters with predefined size. Since mass storage function does not define changing buffer size on run-time it is not required for the field to be a pointer to void and allocating space dynamically. Signed-off-by:
-
Michal Nazarewicz authored
In the final version, many fsg_dev structures will (be able to) refer to a single fsg_common structure and so it is required to move common data to another object which can be shared. Situation where many fsg_dev structures refer single fsg_common structure is when a single instance of MSF is used in several USB configurations. Signed-off-by:
-
Michal Nazarewicz authored
Removed code that was included when CONFIG_USB_FILE_STORAGE_TEST was defined. If this functionality is required one may still use the original File-backed Storage Gadget. It has been agreed that testing functionality is not required in the composite function. Also removed fsg_suspend() and fsg_resume() which were no operations. Moreover, storage_common.c has been modified in such a way that defining certain macros skips parts of the file. Those macros are: * FSG_NO_INTR_EP -- skips interrupt endpoint descriptors * FSG_NO_DEVICE_STRINGS -- skips certain strings * FSG_NO_OTG -- skips OTG descriptor Signed-off-by:
-
Michal Nazarewicz authored
Copied file_storage.c to f_mass_storage.c which will be used as template for the Mass Storage composite Function. Signed-off-by:
-
Michal Nazarewicz authored
Since storage_common.c no longer references mod_data object it is now possible to include it before mod_data object is defined. This makes it possible to move some defines that are used as default values of mod_data fields to be defined in storage_common.c file (where they should be set from the beginning). Also, show_ro(), show_file(), store_ro() and store_file() have been moved to storage_common.c with LUN's device's drvdata changed from pointing to fsg_dev to pointing to rw_semaphore (&fsg->filesem). Signed-off-by:
-
Michal Nazarewicz authored
removable and cdrom flag has been added to the fsg_lun structure removing any references to mod_data object from storage_common.c. As of read-only flag, previously it was set if a read-only backing file was specified (which is good) and remained set even after the file has been closed (which may be considered an issue). Currently, the initial read-only flag is preserved so if it was unset each time file is opened code will try to open it read-write even if previous file was opened read-only. Signed-off-by:
-
Michal Nazarewicz authored
Prefixed some identifiers that were defined in storage_common.c file with "fsg_". Not all identifiers were prefixed but the ones that are most likely to produce conflicts when used with other USB functions. Signed-off-by:
-
Michal Nazarewicz authored
Moved parts of the file_storage.c file which do not reference fsg_dev structure to newly created storage_common.c file. dump_msg() and dump_cdb() have been changed to macros to remove fsg_dev reference. Signed-off-by:
-
Daniel Mack authored
The Freescale MX27 and MX31 SoCs have a EHCI controller onboard. The controller is capable of USB on the go. This patch adds a driver to support all three of them. Users have to pass details about serial interface configuration in the platform data. The USB OTG core used here is the ARC core, so the driver should be renamed and probably be merged with ehci-fsl.c eventually. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Daniel Mack <daniel@caiaq.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
