Skip to content

L
linux
Switch branch/tag
  1. 05 Jan, 2018 13 commits
  3. 04 Jan, 2018 10 commits
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2018-01-04' of... · bc6fe533
      Dave Airlie authored 
      Merge tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v4.15-rc7
- couple of documentation build fixes
- serialize non-blocking modesets
- prevent DMC from messing up GMBUS transfers
- PSR regression fix

* tag 'drm-intel-fixes-2018-01-04' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
  docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
  documentation/gpu/i915: fix docs build error after file rename
  drm/i915: Put all non-blocking modesets onto an ordered wq
  drm/i915: Disable DC states around GMBUS on GLK
  drm/i915/psr: Fix register name mess up.
      bc6fe533
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · 0007b9ca
      Dave Airlie authored 
      - backport of a DC change which fixes a greenish tint on some RV hw
- properly handle kzalloc fail in ttm

* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux:
  drm/ttm: check the return value of kzalloc
  drm/amd/display: call set csc_default if enable adjustment is false
      0007b9ca
    • Dave Airlie's avatar
      Merge branch 'drm-armada-fixes-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-fixes · dc042da0
      Dave Airlie authored 
      Armada fixes.

* 'drm-armada-fixes-4.15' of git://git.armlinux.org.uk/~rmk/linux-arm:
  drm/armada: fix YUV planar format framebuffer offsets
  drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
  drm/armada: fix UV swap code
  drm/armada: fix SRAM powerdown
  drm/armada: fix leak of crtc structure
      dc042da0
    • Dave Airlie's avatar
      Merge tag 'omapdrm-4.15-fixes' of... · 041ea478
      Dave Airlie authored 
      Merge tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes

omapdrm fixes for 4.15

* Fix OMAP4 HDMI CEC interrupt handling and a possible buffer overflow

* tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  omapdrm/dss/hdmi4_cec: fix interrupt handling
      041ea478
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · e1915c81
      Linus Torvalds authored 
      Pull ARM SoC fixes from Arnd Bergmann:
 "Fixes this time include mostly device tree changes, as usual, the
  notable ones include:

   - A number of patches to fix most of the remaining DTC warnings that
     got introduced when DTC started warning about some obvious
     mistakes. We still have some remaining warnings that probably may
     have to wait until 4.16 to get fixed while we try to figure out
     what the correct contents should be.

   - On Allwinner A64, Ethernet PHYs need a fix after a mistake in
     coordination between patches merged through multiple branches.

   - Various fixes for PMICs on allwinner based boards

   - Two fixes for ethernet link detection on some Renesas machines

   - Two stability fixes for rockchip based boards

  Aside from device-tree, two other areas got fixes for older problems:

   - For TI Davinci DM365, a couple of fixes were needed to repair the
     MMC DMA engine support, apparently this has been broken for a
     while.

   - One important fix for all Allwinner chips with the PMIC driver as a
     loadable module"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  arm64: dts: uniphier: fix gpio-ranges property of PXs3 SoC
  arm64: dts: renesas: ulcb: Remove renesas, no-ether-link property
  arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
  ARM: dts: tango4: remove bogus interrupt-controller property
  ARM: dts: ls1021a: fix incorrect clock references
  ARM: dts: aspeed-g4: Correct VUART IRQ number
  ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine
  ARM: dts: sun8i: a711: Reinstate the PMIC compatible
  ARM: davinci: fix mmc entries in dm365's dma_slave_map
  ARM: dts: da850-lego-ev3: Fix battery voltage gpio
  ARM: davinci: Add dma_mask to dm365's eDMA device
  ARM: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA
  arm64: dts: rockchip: limit rk3328-rock64 gmac speed to 100MBit for now
  arm64: dts: rockchip: remove vdd_log from rk3399-puma
  arm64: dts: orange-pi-zero-plus2: fix sdcard detect
  arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
  ARM: dts: sunxi: Convert to CCU index macros for HDMI controller
  sunxi-rsb: Include OF based modalias in device uevent
  ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850
  arm64: dts: rockchip: fix trailing 0 in rk3328 tsadc interrupts
  ...
      e1915c81
    • Masahiro Yamada's avatar
      arm64: dts: uniphier: fix gpio-ranges property of PXs3 SoC · abb62c46
      Masahiro Yamada authored 
      This is probably a copy-paste mistake.  The gpio-ranges of PXs3 is
different from that of LD20.

Fixes: 277b51e7 ("arm64: dts: uniphier: add GPIO controller nodes")
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      abb62c46
    • Arnd Bergmann's avatar
      Merge tag 'sunxi-fixes-for-4.15' of... · d84baa5a
      Arnd Bergmann authored 
      Merge tag 'sunxi-fixes-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes

Pull "Allwinner fixes for 4.15" from Chen-Yu Tsai:

First, one fix that adds proper regulator references for the EMAC
external PHYs on A64 boards. The EMAC bindings were developed for 4.13,
but reverted at the last minute. They were finalized and brought back
for 4.15. However in the time between, regulator support for the A64
boards was merged. When EMAC device tree changes were reintroduced,
this was not taken into account.

Second, a patch that adds OF based modalias uevent for RSB slave devices.
This has been missing since the introduction of RSB, and recently with
PMIC regulator support introduced for the A64, has been seen affecting
distributions, which have the all-important PMIC mfd drivers built as
modules, which then don't get loaded.

Other minor cleanups include final conversion of raw indices to CCU
binding macros for sun[4567]i HDMI, cleanup of dummy regulators on the
A64 SOPINE, a SD card detection polarity fix for the Orange Pi Zero
Plus2, and adding a missing compatible for the PMIC on the TBS A711
tablet.

* tag 'sunxi-fixes-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i: a711: Reinstate the PMIC compatible
  arm64: dts: orange-pi-zero-plus2: fix sdcard detect
  arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3
  ARM: dts: sunxi: Convert to CCU index macros for HDMI controller
  sunxi-rsb: Include OF based modalias in device uevent
  arm64: allwinner: a64: add Ethernet PHY regulator for several boards
      d84baa5a
    • Arnd Bergmann's avatar
      Merge tag 'renesas-fixes-for-v4.15' of... · 3bfbed8d
      Arnd Bergmann authored 
      Merge tag 'renesas-fixes-for-v4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Pull "Renesas ARM Based SoC Fixes for v4.15" from Simon Horman:

Vladimir Zapolskiy says:

The present change is a bug fix for AVB link iteratively up/down.

Steps to reproduce:
- start AVB TX stream (Using aplay via MSE),
- disconnect+reconnect the eth cable,
- after a reconnection the eth connection goes iteratively up/down
  without user interaction,
- this may heal after some seconds or even stay for minutes.

As the documentation specifies, the "renesas,no-ether-link" option
should be used when a board does not provide a proper AVB_LINK signal.
There is no need for this option enabled on RCAR H3/M3 Salvator-X/XS
and ULCB starter kits since the AVB_LINK is correctly handled by HW.

Choosing to keep or remove the "renesas,no-ether-link" option will
have impact on the code flow in the following ways:
- keeping this option enabled may lead to unexpected behavior since
  the RX & TX are enabled/disabled directly from adjust_link function
  without any HW interrogation,
- removing this option, the RX & TX will only be enabled/disabled after
  HW interrogation. The HW check is made through the LMON pin in PSR
  register which specifies AVB_LINK signal value (0 - at low level;
  1 - at high level).

In conclusion, the change is also a safety improvement because it
removes the "renesas,no-ether-link" option leading to a proper way
of detecting the link state based on HW interrogation and not on
software heuristic.

Note that DTS files for V3M Starter Kit, Draak and Eagle boards
contain the same property, the files are untouched due to unavailable
schematics to verify if the fix applies to these boards as well.

* tag 'renesas-fixes-for-v4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: ulcb: Remove renesas, no-ether-link property
  arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
      3bfbed8d
    • Lucas De Marchi's avatar
      drm/i915: Apply Display WA #1183 on skl, kbl, and cfl · 30414f30
      Lucas De Marchi authored 
      Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
 enabling or in previous enabling."

This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.

We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.

This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.

Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com
(cherry picked from commit 53421c2f)
[ Lucas: Backport to 4.15 adding back variable that has been removed on
  commits not meant to be backported ]
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102201837.6812-1-lucas.demarchi@intel.com
      30414f30
    • Linus Torvalds's avatar
      Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 00a5ae21
      Linus Torvalds authored 
      Pull x86 page table isolation fixes from Thomas Gleixner:
 "A couple of urgent fixes for PTI:

   - Fix a PTE mismatch between user and kernel visible mapping of the
     cpu entry area (differs vs. the GLB bit) and causes a TLB mismatch
     MCE on older AMD K8 machines

   - Fix the misplaced CR3 switch in the SYSCALL compat entry code which
     causes access to unmapped kernel memory resulting in double faults.

   - Fix the section mismatch of the cpu_tss_rw percpu storage caused by
     using a different mechanism for declaration and definition.

   - Two fixes for dumpstack which help to decode entry stack issues
     better

   - Enable PTI by default in Kconfig. We should have done that earlier,
     but it slipped through the cracks.

   - Exclude AMD from the PTI enforcement. Not necessarily a fix, but if
     AMD is so confident that they are not affected, then we should not
     burden users with the overhead"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/process: Define cpu_tss_rw in same section as declaration
  x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()
  x86/dumpstack: Print registers for first stack frame
  x86/dumpstack: Fix partial register dumps
  x86/pti: Make sure the user/kernel PTEs match
  x86/cpu, x86/pti: Do not enable PTI on AMD processors
  x86/pti: Enable PTI by default
      00a5ae21
  5. 03 Jan, 2018 11 commits
  7. 02 Jan, 2018 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7