It is possible for a resource group to consist out of MBA as well as
CAT/CDP resources. The "exclusive" resource mode only applies to the
CAT/CDP resources since MBA allocations cannot be specified to overlap
or not. When a user requests a resource group to become "exclusive" then it
can only be successful if there are CAT/CDP resources in the group
and none of their CBMs associated with the group's CLOSID overlaps with
any other resource group.

Fix the "exclusive" mode setting by failing if there isn't any CAT/CDP
resource in the group and ensuring that the CBM checking is only done on
CAT/CDP resources.

Fixes: 49f7b4ef ("x86/intel_rdt: Enable setting of exclusive mode")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-9-git-send-email-fenghua.yu@intel.com

A loop is used to check if a CAT resource's CBM of one CLOSID
overlaps with the CBM of another CLOSID of the same resource. The loop
is run over all CLOSIDs supported by the resource.

The problem with running the loop over all CLOSIDs supported by the
resource is that its number of supported CLOSIDs may be more than the
number of supported CLOSIDs on the system, which is the minimum number of
CLOSIDs supported across all resources.

Fix the loop to only consider the number of system supported CLOSIDs,
not all that are supported by the resource.

Fixes: 49f7b4ef ("x86/intel_rdt: Enable setting of exclusive mode")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-8-git-send-email-fenghua.yu@intel.com

A system supporting pseudo-locking may have MBA as well as CAT
resources of which only the CAT resources could support cache
pseudo-locking. When the schemata to be pseudo-locked is provided it
should be checked that that schemata does not attempt to pseudo-lock a
MBA resource.

Fixes: e0bdfe8e ("x86/intel_rdt: Support creation/removal of pseudo-locked region")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-7-git-send-email-fenghua.yu@intel.com

When a new resource group is created, it is initialized with sane
defaults that currently assume the resource being initialized is a CAT
resource. This code path is also followed by a MBA resource that is not
allocated the same as a CAT resource and as a result we encounter the
following unchecked MSR access error:

unchecked MSR access error: WRMSR to 0xd51 (tried to write 0x0000
000000000064) at rIP: 0xffffffffae059994 (native_write_msr+0x4/0x20)
Call Trace:
mba_wrmsr+0x41/0x80
update_domains+0x125/0x130
rdtgroup_mkdir+0x270/0x500

Fix the above by ensuring the initial allocation is only attempted on a
CAT resource.

Fixes: 95f0b77e ("x86/intel_rdt: Initialize new resource group with sane defaults")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-6-git-send-email-fenghua.yu@intel.com

When multiple resources are managed by RDT, the number of CLOSIDs used
is the minimum of the CLOSIDs supported by each resource. In the function
rdt_bit_usage_show(), the annotated bitmask is created to depict how the
CAT supporting caches are being used. During this annotated bitmask
creation, each resource group is queried for its mode that is used as a
label in the annotated bitmask.

The maximum number of resource groups is currently assumed to be the
number of CLOSIDs supported by the resource for which the information is
being displayed. This is incorrect since the number of active CLOSIDs is
the minimum across all resources.

If information for a cache instance with more CLOSIDs than another is
being generated we thus encounter a warning like:

invalid mode for closid 8
WARNING: CPU: 88 PID: 1791 at [SNIP]/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
:827 rdt_bit_usage_show+0x221/0x2b0

Fix this by ensuring that only the number of supported CLOSIDs are
considered.

Fixes: e6519011 ("x86/intel_rdt: Introduce "bit_usage" to display cache allocations details")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-5-git-send-email-fenghua.yu@intel.com

The number of CLOSIDs supported by a system is the minimum number of
CLOSIDs supported by any of its resources. Care should be taken when
iterating over the CLOSIDs of a resource since it may be that the number
of CLOSIDs supported on the system is less than the number of CLOSIDs
supported by the resource.

Introduce a helper function that can be used to query the number of
CLOSIDs that is supported by all resources, irrespective of how many
CLOSIDs are supported by a particular resource.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-4-git-send-email-fenghua.yu@intel.com

Chen Yu reported a divide-by-zero error when accessing the 'size'
resctrl file when a MBA resource is enabled.

divide error: 0000 [#1] SMP PTI
CPU: 93 PID: 1929 Comm: cat Not tainted 4.19.0-rc2-debug-rdt+ #25
RIP: 0010:rdtgroup_cbm_to_size+0x7e/0xa0
Call Trace:
rdtgroup_size_show+0x11a/0x1d0
seq_read+0xd8/0x3b0

Quoting Chen Yu's report: This is because for MB resource, the
r->cache.cbm_len is zero, thus calculating size in rdtgroup_cbm_to_size()
will trigger the exception.

Fix this issue in the 'size' file by getting correct memory bandwidth value
which is in MBps when MBA software controller is enabled or in percentage
when MBA software controller is disabled.

Fixes: d9b48c86 ("x86/intel_rdt: Display resource groups' allocations in bytes")
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Xiaochen Shen" <xiaochen.shen@intel.com>
Link: https://lkml.kernel.org/r/20180904174614.26682-1-yu.c.chen@intel.com
Link: https://lkml.kernel.org/r/1537048707-76280-3-git-send-email-fenghua.yu@intel.com

Each resource is associated with a parsing callback to parse the data
provided from user space when writing schemata file.

The 'data' parameter in the callbacks is defined as a void pointer which
is error prone due to lack of type check.

parse_bw() processes the 'data' parameter as a string while its caller
actually passes the parameter as a pointer to struct rdt_cbm_parse_data.
Thus, parse_bw() takes wrong data and causes failure of parsing MBA
throttle value.

To fix the issue, the 'data' parameter in all parsing callbacks is defined
and handled as a pointer to struct rdt_parse_data (renamed from struct
rdt_cbm_parse_data).

Fixes: 7604df6e ("x86/intel_rdt: Support flexible data to parsing callbacks")
Fixes: 9ab9aa15 ("x86/intel_rdt: Ensure requested schemata respects mode")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H Peter Anvin" <hpa@zytor.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: "Chen Yu" <yu.c.chen@intel.com>
Link: https://lkml.kernel.org/r/1537048707-76280-2-git-send-email-fenghua.yu@intel.com

The recent removal of the memblock dependency from kvmclock caused a SEV
guest regression because the wall_clock and hv_clock_boot variables are
no longer mapped decrypted when SEV is active.

Use the __bss_decrypted attribute to put the static wall_clock and
hv_clock_boot in the .bss..decrypted section so that they are mapped
decrypted during boot.

In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer
assigns either an element of the static array or dynamically allocated
memory for the pvclock data pointer. The static array are now mapped
decrypted but the dynamically allocated memory is not mapped decrypted.
However, when SEV is active this memory range must be mapped decrypted.

Add a function which is called after the page allocator is up, and
allocate memory for the pvclock data pointers for the all possible cpus.
Map this memory range as decrypted when SEV is active.

Fixes: 368a540e ("x86/kvmclock: Remove memblock dependency")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com

kvmclock defines few static variables which are shared with the
hypervisor during the kvmclock initialization.

When SEV is active, memory is encrypted with a guest-specific key, and
if the guest OS wants to share the memory region with the hypervisor
then it must clear the C-bit before sharing it.

Currently, we use kernel_physical_mapping_init() to split large pages
before clearing the C-bit on shared pages. But it fails when called from
the kvmclock initialization (mainly because the memblock allocator is
not ready that early during boot).

Add a __bss_decrypted section attribute which can be used when defining
such shared variable. The so-defined variables will be placed in the
.bss..decrypted section. This section will be mapped with C=0 early
during boot.

The .bss..decrypted section has a big chunk of memory that may be unused
when memory encryption is not active, free it when memory encryption is
not active.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Radim Krčmář<rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Link: https://lkml.kernel.org/r/1536932759-12905-2-git-send-email-brijesh.singh@amd.com

Pull x86 fixes from Ingol Molnar:
 "Misc fixes:

   - EFI crash fix

   - Xen PV fixes

   - do not allow PTI on 2-level 32-bit kernels for now

   - documentation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/APM: Fix build warning when PROC_FS is not enabled
  Revert "x86/mm/legacy: Populate the user page-table with user pgd's"
  x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3
  x86/xen: Disable CPU0 hotplug for Xen PV
  x86/EISA: Don't probe EISA bus for Xen PV guests
  x86/doc: Fix Documentation/x86/earlyprintk.txt

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: various scheduler metrics corner case fixes, a
  sched_features deadlock fix, and a topology fix for certain NUMA
  systems"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix kernel-doc notation warning
  sched/fair: Fix load_balance redo for !imbalance
  sched/fair: Fix scale_rt_capacity() for SMT
  sched/fair: Fix vruntime_normalized() for remote non-migration wakeup
  sched/pelt: Fix update_blocked_averages() for RT and DL classes
  sched/topology: Set correct NUMA topology type
  sched/debug: Fix potential deadlock when writing to sched_features

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also breakpoint and x86 PMU driver fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  perf tools: Fix maps__find_symbol_by_name()
  tools headers uapi: Update tools's copy of linux/if_link.h
  tools headers uapi: Update tools's copy of linux/vhost.h
  tools headers uapi: Update tools's copies of kvm headers
  tools headers uapi: Update tools's copy of drm/drm.h
  tools headers uapi: Update tools's copy of asm-generic/unistd.h
  tools headers uapi: Update tools's copy of linux/perf_event.h
  perf/core: Force USER_DS when recording user stack data
  perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use
  perf/x86/intel: Add support/quirk for the MISPREDICT bit on Knights Landing CPUs
  perf annotate: Fix parsing aarch64 branch instructions after objdump update
  perf probe powerpc: Ignore SyS symbols irrespective of endianness
  perf event-parse: Use fixed size string for comms
  perf util: Fix bad memory access in trace info.
  perf tools: Streamline bpf examples and headers installation
  perf evsel: Fix potential null pointer dereference in perf_evsel__new_idx()
  perf arm64: Fix include path for asm-generic/unistd.h
  perf/hw_breakpoint: Simplify breakpoint enable in perf_event_modify_breakpoint
  perf/hw_breakpoint: Enable breakpoint in modify_user_hw_breakpoint
  perf/hw_breakpoint: Remove superfluous bp->attr.disabled = 0
  ...

Pull locking fixes from Ingo Molnar:
 "Misc fixes: liblockdep fixes and ww_mutex fixes"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/ww_mutex: Fix spelling mistake "cylic" -> "cyclic"
  locking/lockdep: Delete unnecessary #include
  tools/lib/lockdep: Add dummy task_struct state member
  tools/lib/lockdep: Add empty nmi.h
  tools/lib/lockdep: Update Sasha Levin email to MSFT
  jump_label: Fix typo in warning message
  locking/mutex: Fix mutex debug call and ww_mutex documentation

Fix build warning in apm_32.c when CONFIG_PROC_FS is not enabled:

../arch/x86/kernel/apm_32.c:1643:12: warning: 'proc_apm_show' defined but not used [-Wunused-function]
 static int proc_apm_show(struct seq_file *m, void *v)

Fixes: 3f3942ac ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jiri Kosina <jikos@kernel.org>
Link: https://lkml.kernel.org/r/be39ac12-44c2-4715-247f-4dcc3c525b8b@infradead.org

Pull cifs fixes from Steve French:
 "Fixes for four CIFS/SMB3 potential pointer overflow issues, one minor
  build fix, and a build warning cleanup"

* tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: read overflow in is_valid_oplock_break()
  cifs: integer overflow in in SMB2_ioctl()
  CIFS: fix wrapping bugs in num_entries()
  cifs: prevent integer overflow in nxt_dir_entry()
  fs/cifs: require sha512
  fs/cifs: suppress a string overflow warning

Pull NFS client bugfixes from Anna Schumaker:
 "These are a handful of fixes for problems that Trond found. Patch #1
  and #3 have the same name, a second issue was found after applying the
  first patch.

  Stable bugfixes:
   - v4.17+: Fix tracepoint Oops in initiate_file_draining()
   - v4.11+: Fix an infinite loop on I/O

  Other fixes:
   - Return errors if a waiting layoutget is killed
   - Don't open code clearing of delegation state"

* tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Don't open code clearing of delegation state
  NFSv4.1 fix infinite loop on I/O.
  NFSv4: Fix a tracepoint Oops in initiate_file_draining()
  pNFS: Ensure we return the error if someone kills a waiting layoutget
  NFSv4: Fix a tracepoint Oops in initiate_file_draining()

Pull tracing fix from Steven Rostedt:
 "This fixes an issue with the build system caused by a change that
  modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies
  and causes "make targz-pkg" to rebuild the entire world"

* tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE

Pull DeviceTree fix from Rob Herring:
 "One regression for a 20 year old PowerMac:

   - Fix a regression on systems having a DT without any phandles which
     happens on a PowerMac G3"

* tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fix phandle cache creation for DTs with no phandles

Pull xen fixes from Juergen Gross:
 "This contains some minor cleanups and fixes:

   - a new knob for controlling scrubbing of pages returned by the Xen
     balloon driver to the Xen hypervisor to address a boot performance
     issue seen in large guests booted pre-ballooned

   - a fix of a regression in the gntdev driver which made it impossible
     to use fully virtualized guests (HVM guests) with a 4.19 based dom0

   - a fix in Xen cpu hotplug functionality which could be triggered by
     wrong admin commands (setting number of active vcpus to 0)

  One further note: the patches have all been under test for several
  days in another branch. This branch has been rebased in order to avoid
  merge conflicts"

* tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: fix up blockable calls to mn_invl_range_start
  xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
  xen: avoid crash in disable_hotplug_cpu
  xen/balloon: add runtime control for scrubbing ballooned out pages
  xen/manage: don't complain about an empty value in control/sysrq node

Pull Xtensa fixes and cleanups from Max Filippov:

 - don't allocate memory in platform_setup as the memory allocator is
   not initialized at that point yet;

 - remove unnecessary ifeq KBUILD_SRC from arch/xtensa/Makefile;

 - enable SG chaining in arch/xtensa/Kconfig.

* tag 'xtensa-20180914' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: enable SG chaining in Kconfig
  xtensa: remove unnecessary KBUILD_SRC ifeq conditional
  xtensa: ISS: don't allocate memory in platform_setup

Pull arm64 fixes from Will Deacon:
 "The trickle of arm64 fixes continues to come in.

  Nothing that's the end of the world, but we've got a fix for PCI IO
  port accesses, an accidental naked "asm goto" and a fix to the
  vmcoreinfo PT_NOTE merged this time around which we'd like to get
  sorted before it becomes ABI.

   - Fix ioport_map() mapping the wrong physical address for some I/O
     BARs

   - Remove direct use of "asm goto", since some compilers don't like
     that

   - Ensure kimage_voffset is always present in vmcoreinfo PT_NOTE"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
  arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE
  arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"

Add a helper for the case when the nfs4 open state has been set to use
a delegation stateid, and we want to revert to using the open stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The previous fix broke recovery of delegated stateids because it assumes
that if we did not mark the delegation as suspect, then the delegation has
effectively been revoked, and so it removes that delegation irrespectively
of whether or not it is valid and still in use. While this is "mostly
harmless" for ordinary I/O, we've seen pNFS fail with LAYOUTGET spinning
in an infinite loop while complaining that we're using an invalid stateid
(in this case the all-zero stateid).

What we rather want to do here is ensure that the delegation is always
correctly marked as needing testing when that is the case. So we want
to close the loophole offered by nfs4_schedule_stateid_recovery(),
which marks the state as needing to be reclaimed, but not the
delegation that may be backing it.

Fixes: 0e3d3e5d ("NFSv4.1 fix infinite loop on IO BAD_STATEID error")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to
change the test in the tracepoint.

Fixes: ce5624f7 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If someone interrupts a wait on one or more outstanding layoutgets in
pnfs_update_layout() then return the ERESTARTSYS/EINTR error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to
change the test in the tracepoint.

Fixes: ce5624f7 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull dmaengine fix from Vinod Koul:
 "Fix the mic_x100_dma driver to use devm_kzalloc for driver memory, so
  that it is freed properly when it unregisters from dmaengine using
  managed API"

* tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mic_x100_dma: use devm_kzalloc to fix an issue

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for -rc4.

  The usual suspects of gadget, xhci, and dwc2/3 are in here, along with
  some reverts of reported problem changes, and a number of build
  documentation warning fixes. Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  Revert "cdc-acm: implement put_char() and flush_chars()"
  usb: Change usb_of_get_companion_dev() place to usb/common
  usb: xhci: fix interrupt transfer error happened on MTK platforms
  usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
  usb: misc: uss720: Fix two sleep-in-atomic-context bugs
  usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
  usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
  linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
  usb/typec: fix kernel-doc notation warning for typec_match_altmode
  usb: Don't die twice if PCI xhci host is not responding in resume
  usb: mtu3: fix error of xhci port id when enable U3 dual role
  usb: uas: add support for more quirk flags
  USB: Add quirk to support DJI CineSSD
  usb: typec: fix kernel-doc parameter warning
  usb/dwc3/gadget: fix kernel-doc parameter warning
  USB: yurex: Check for truncation in yurex_read()
  USB: yurex: Fix buffer over-read in yurex_write()
  usb: host: xhci-plat: Iterate over parent nodes for finding quirks
  xhci: Fix use after free for URB cancellation on a reallocated endpoint
  USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
  ...

Pull tty fixes from Greg KH:
 "Here are three small HVC tty driver fixes to resolve a reported
  regression from 4.19-rc1.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: hvc: hvc_write() fix break condition
  tty: hvc: hvc_poll() fix read loop batching
  tty: hvc: hvc_poll() fix read loop hang

Pull staging/IIO driver fixes from Greg KH:
 "Here are a few small staging and iio driver fixes for -rc4.

  Nothing major, just a few small bugfixes for some reported issues, and
  a MAINTAINERS file update for the fbtft drivers.

  We also re-enable the building of the erofs filesystem as the XArray
  patches that were causing it to break never got merged in the -rc1
  cycle, so there's no reason it can't be turned back on for now. The
  problem that was previously there is now being handled in the Xarray
  tree at the moment, so it will not hit us again in the future.

  All of these patches have been in linux-next with no reported issues"

* tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vboxvideo: Change address of scanout buffer on page-flip
  staging: vboxvideo: Fix IRQs no longer working
  staging: gasket: TODO: re-implement using UIO
  staging/fbtft: Update TODO and mailing lists
  staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)
  iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
  Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
  Revert "staging: erofs: disable compiling temporarile"
  MAINTAINERS: Switch a maintainer for drivers/staging/gasket
  staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"

Pull char/misc driver fixes from Greg KH:
 "Here are a small handful of char/misc driver fixes for 4.19-rc4.

  All of them are simple, resolving reported problems in a few drivers.
  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  firmware: Fix security issue with request_firmware_into_buf()
  vmbus: don't return values for uninitalized channels
  fpga: dfl: fme: fix return value check in in pr_mgmt_init()
  misc: hmc6352: fix potential Spectre v1
  Tools: hv: Fix a bug in the key delete code
  misc: ibmvsm: Fix wrong assignment of return code
  android: binder: fix the race mmap and alloc_new_buf_locked
  mei: bus: need to unlink client before freeing
  mei: bus: fix hw module get/put balance
  mei: fix use-after-free in mei_cl_write
  mei: ignore not found client in the enumeration

This reverts commit 1f40a46c.

It turned out that this patch is not sufficient to enable PTI on 32 bit
systems with legacy 2-level page-tables. In this paging mode the huge-page
PTEs are in the top-level page-table directory, where also the mirroring to
the user-space page-table happens. So every huge PTE exits twice, in the
kernel and in the user page-table.

That means that accessed/dirty bits need to be fetched from two PTEs in
this mode to be safe, but this is not trivial to implement because it needs
changes to generic code just for the sake of enabling PTI with 32-bit
legacy paging. As all systems that need PTI should support PAE anyway,
remove support for PTI when 32-bit legacy paging is used.

Fixes: 7757d607 ('x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32')
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: https://lkml.kernel.org/r/1536922754-31379-1-git-send-email-joro@8bytes.org

Patch series "mmu_notifiers follow ups".

Tetsuo has noticed some fallouts from 93065ac7 ("mm, oom: distinguish
blockable mode for mmu notifiers").  One of them has been fixed and picked
up by AMD/DRM maintainer [1].  XEN issue is fixed by patch 1.  I have also
clarified expectations about blockable semantic of invalidate_range_end.
Finally the last patch removes MMU_INVALIDATE_DOES_NOT_BLOCK which is no
longer used nor needed.

[1] http://lkml.kernel.org/r/20180824135257.GU29735@dhcp22.suse.cz

This patch (of 3):

93065ac7 ("mm, oom: distinguish blockable mode for mmu notifiers") has
introduced blockable parameter to all mmu_notifiers and the notifier has
to back off when called in !blockable case and it could block down the
road.

The above commit implemented that for mn_invl_range_start but both
in_range checks are done unconditionally regardless of the blockable mode
and as such they would fail all the time for regular calls.  Fix this by
checking blockable parameter as well.

Once we are there we can remove the stale TODO.  The lock has to be
sleepable because we wait for completion down in gnttab_unmap_refs_sync.

Link: http://lkml.kernel.org/r/20180827112623.8992-2-mhocko@kernel.org
Fixes: 93065ac7 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

This patch removes duplicate macro useage in events_base.c.

It also fixes gcc warning:
variable ‘col’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0:

BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010
RIP: e030:device_offline+0x9/0xb0
Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6
RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000
R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30
R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0
FS:  00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660
Call Trace:
 handle_vcpu_hotplug_event+0xb5/0xc0
 xenwatch_thread+0x80/0x140
 ? wait_woken+0x80/0x80
 kthread+0x112/0x130
 ? kthread_create_worker_on_cpu+0x40/0x40
 ret_from_fork+0x3a/0x50

This happens because handle_vcpu_hotplug_event is called twice. In the
first iteration cpu_present is still true, in the second iteration
cpu_present is false which causes get_cpu_device to return NULL.
In case of cpu#0, cpu_online is apparently always true.

Fix this crash by checking if the cpu can be hotplugged, which is false
for a cpu that was just removed.

Also check if the cpu was actually offlined by device_remove, otherwise
leave the cpu_present state as it is.

Rearrange to code to do all work with device_hotplug_lock held.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.

Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

When guest receives a sysrq request from the host it acknowledges it by
writing '\0' to control/sysrq xenstore node. This, however, make xenstore
watch fire again but xenbus_scanf() fails to parse empty value with "%c"
format string:

 sysrq: SysRq : Emergency Sync
 Emergency Sync complete
 xen:manage: Error -34 reading sysrq code in control/sysrq

Ignore -ERANGE the same way we already ignore -ENOENT, empty value in
control/sysrq is totally legal.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

The !CONFIG_GENERIC_IOMAP version of ioport_map uses MMIO_UPPER_LIMIT to
prevent users from making I/O accesses outside the expected I/O range -
however it erroneously treats MMIO_UPPER_LIMIT as a mask which is
contradictory to its other users.

The introduction of CONFIG_INDIRECT_PIO, which subtracts an arbitrary
amount from IO_SPACE_LIMIT to form MMIO_UPPER_LIMIT, results in ioport_map
mangling the given port rather than capping it.

We address this by aligning more closely with the CONFIG_GENERIC_IOMAP
implementation of ioport_map by using the comparison operator and
returning NULL where the port exceeds MMIO_UPPER_LIMIT. Though note that
we preserve the existing behavior of masking with IO_SPACE_LIMIT such that
we don't break existing buggy drivers that somehow rely on this masking.

Fixes: 5745392e ("PCI: Apply the new generic I/O management on PCI IO hosts")
Reported-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull printk fix from Petr Mladek:
 "Revert a commit that caused "quiet", "debug", and "loglevel" early
  parameters to be ignored for early boot messages"

* tag 'printk-for-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  Revert "printk: make sure to print log on console."