- 26 Sep, 2018 10 commits
-
-
Lijun Ou authored
This patch mainly sets the vlan_id field in the WC for rdma_listen() to work over vlan. This is required by ib_init_ah_attr_from_wc() which is called by the CM REQ handler. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
This patch adds atomic operations for hip08, includes fetchadd and cmpswap operation. In order to enable atomic, the driver needs to do the following steps: 1. Enable the atomic caps for RoCE device 2. Post the wqe context of atomic type 3. Configure the atomic type of mtpt Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
Currently the transport opcodes which come from users configuration is set by similar code. This patch simplifies it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
-
Jason Gunthorpe authored
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
-
Jason Gunthorpe authored
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
-
Jason Gunthorpe authored
Kernel convention is that a driver for a subsystem will print using dev_* on the subsystem's struct device, or with dev_* on the physical device. Drivers should rarely use a pr_* function. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Any messages related to a device should be printed with the dev_* formatters. This provides greater consistency for the user. The core does not set pr_fmt so this has no significant change. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
-
Jason Gunthorpe authored
The current code has two copies of the device name, ibdev->dev and dev_name(&ibdev->dev), and they are setup at different times, which is very confusing. Set them both up at the same time and make dev_name() the lead name, which is the proper use of the driver core APIs. To make it very clear that the name is not valid until registration pass it in to the ib_register_device() call rather than messing with ibdev->name directly. Also the reorganization now checks that dev_name is unique even if it does not contain a %. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
-
Arnd Bergmann authored
The mlx4 driver produces a link error when it is configured as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m: drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap': main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io' The same function is called from mlx5, which already has a dependency to ensure we can call it, and from hns, which appears to suffer from the same problem. This adds the same dependency that mlx5 uses to the other two. Fixes: 6745d356 ("RDMA/hns: Use rdma_user_mmap_io") Fixes: c282da41 ("RDMA/mlx4: Use rdma_user_mmap_io") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 25 Sep, 2018 28 commits
-
-
Doug Ledford authored
Given a large enough memory allocation, it is possible to wrap the pinned_vm counter. Check for addition overflow to prevent such eventualities. Fixes: 40ddacf2 ("RDMA/umem: Don't hold mmap_sem for too long") Reported-by: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Doug Ledford <dledford@redhat.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Doug Ledford authored
Noticed while reviewing commit d4b4dd1b ("RDMA/umem: Do not use current->tgid to track the mm_struct") patch. Why would we take a lock, adjust a protected variable, drop the lock, and *then* check the input into our protected variable adjustment? Then we have to take the lock again on our error unwind. Let's just check the input early and skip taking the locks needlessly if the input isn't valid. It was also noticed that we set mm = current->mm, we then never modify mm, but we still go back and reference current->mm a number of times needlessly. Be consistent in using the stored reference in mm. Signed-off-by: Doug Ledford <dledford@redhat.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion from enumeration type 'enum t4_bar2_qtype' to different enumeration type 'enum cxgb4_bar2_qtype' [-Wenum-conversion] T4_BAR2_QTYPE_EGRESS, ^~~~~~~~~~~~~~~~~~~~ c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the corresponding values from that type so Clang is satisfied without changing the meaning of the code. T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0 T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1 Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Mark Bloch authored
When profiles were introduced to MLX5 IB an unneeded version print when creating an MLX5 IB device was added. Remove the print, we still have a printk for driver version in mlx5_ib_add(). Fixes: 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Colin Ian King authored
Trivial fix to spelling mistake in usnic_err error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set valid umem bit on DEVX commands that use umem. This will enforce the umem usage by the firmware and not the 'pas' info. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of TD commands so that the firmware can manage the TD object in a secured way. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of XRCD commands so that the firmware can manage the XRCD object in a secured way. That will enable using an XRCD that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of CQ creation so that the firmware can manage the CQ object in a secured way. The uid for the destroy and the modify commands is set by mlx5_core. This will enable using a CQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of PD allocation, this uid is used for other mlx5 objects upon calling the firmware. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of RQT commands so that the firmware can manage the RQT object in a secured way. That will enable using an RQT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of TIS commands so that the firmware can manage the TIS object in a secured way. That will enable using a TIS that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of TIR commands so that the firmware can manage the TIR object in a secured way. That will enable using a TIR that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of MCG commands so that the firmware can manage the MCG object in a secured way. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of DCT create command so that the firmware can manage the DCT object in a secured way. The uid for the destroy and drain commands are set by mlx5_core. That will enable using a DCT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of SRQ create command so that the firmware can manage the SRQ object in a secured way. The uid for the destroy and modify commands are set by mlx5_core. That will enable using a SRQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of SQ commands so that the firmware can manage the SQ object in a secured way. The uid for the destroy command is set by mlx5_core. This will enable using an SQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of RQ commands so that the firmware can manage the RQ object in a secured way. The uid for the destroy command is set by mlx5_core. This will enable using an RQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Set uid as part of QP creation so that the firmware can manage the QP object in a secured way. The uid for the destroy and the modify commands is set by mlx5_core. This will enable using a QP that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Use uid as part of PD commands so that the firmware can manage the PD object in a secured way. For example when a QP is created its uid must match the CQ uid which it uses. Next patches in this series will use the uid from the PD, then will come a patch to set the uid on the PD so that all objects will be properly work in one change. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git This is required to resolve dependencies of the next series of RDMA patches. * branch 'mellanox/mlx5-next': net/mlx5: Update mlx5_ifc with DEVX UID bits net/mlx5: Set uid as part of DCT commands net/mlx5: Set uid as part of SRQ commands net/mlx5: Set uid as part of SQ commands net/mlx5: Set uid as part of RQ commands net/mlx5: Set uid as part of QP commands net/mlx5: Set uid as part of CQ commands Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Leon Romanovsky authored
Add DEVX information to WQ, SRQ, CQ, TIR, TIS, QP, RQ, XRCD, PD, MKEY and MCG. Each object that is created/destroyed/modified via verbs will be stamped with a UID based on its user context. This is already done for DEVX objects commands. This will enable the firmware to enforce the usage of kernel objects from the DEVX flow by validating that the same UID is used and the resources are really related to the same user. The addition of *_valid fields are needed to distinguish how various addresses are passed. For non-DEVX callers, all those fields will be zero. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
Yishai Hadas authored
Set uid as part of DCT commands so that the firmware can manage the DCT object in a secured way. That will enable using a DCT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
Yishai Hadas authored
Set uid as part of SRQ commands so that the firmware can manage the SRQ object in a secured way. That will enable using an SRQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
Yishai Hadas authored
Set uid as part of SQ commands so that the firmware can manage the SQ object in a secured way. That will enable using an SQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
Yishai Hadas authored
Set uid as part of RQ commands so that the firmware can manage the RQ object in a secured way. That will enable using an RQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
Yishai Hadas authored
Set uid as part of QP commands so that the firmware can manage the QP object in a secured way. That will enable using a QP that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
Yishai Hadas authored
Set uid as part of CQ commands so that the firmware can manage the CQ object in a secured way. The firmware should mark this CQ with the given uid so that it can be used later on only by objects with the same uid. Upon DEVX flows that use this CQ (e.g. create QP command), the pointed CQ must have the same uid as of the issuer uid command. When a command is issued with uid=0 it means that the issuer of the command is trusted (i.e. kernel), in that case any pointed object can be used regardless of its uid. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
-
- 22 Sep, 2018 2 commits
-
-
Doug Ledford authored
For dependencies, branch based on 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git mlx5 mcast/ucast loopback control enhancements from Leon Romanovsky: ==================== This is short series from Mark which extends handling of loopback traffic. Originally mlx5 IB dynamically enabled/disabled both unicast and multicast based on number of users. However RAW ethernet QPs need more granular access. ==================== Fixed failed automerge in mlx5_ib.h (minor context conflict issue) mlx5-vport-loopback branch: RDMA/mlx5: Enable vport loopback when user context or QP mandate RDMA/mlx5: Allow creating RAW ethernet QP with loopback support RDMA/mlx5: Refactor transport domain bookkeeping logic net/mlx5: Rename incorrect naming in IFC file Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Mark Bloch authored
A user can create a QP which can accept loopback traffic, but that's not enough. We need to enable loopback on the vport as well. Currently vport loopback is enabled only when more than 1 users are using the IB device, update the logic to consider whatever a QP which supports loopback was created, if so enable vport loopback even if there is only a single user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-