Yury Norov reported that an arm64 KVM instance could not boot since
after v5.0-rc1 and could addressed by reverting the patches

  1c30844d ("mm: reclaim small amounts of memory when an external
  73444bc4 ("mm, page_alloc: do not wake kswapd with zone lock held")

The problem is that a division by zero error is possible if boosting
occurs very early in boot if the system has very little memory.  This
patch avoids the division by zero error.

Link: http://lkml.kernel.org/r/20190213143012.GT9565@techsingularity.net
Fixes: 1c30844d ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Evaluating page_mapping() on a poisoned page ends up dereferencing junk
and making PF_POISONED_CHECK() considerably crashier than intended:

    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c2f6ac38
    [0000000000000006] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] PREEMPT SMP
    Modules linked in:
    CPU: 2 PID: 491 Comm: bash Not tainted 5.0.0-rc1+ #1
    Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
    pstate: 00000005 (nzcv daif -PAN -UAO)
    pc : page_mapping+0x18/0x118
    lr : __dump_page+0x1c/0x398
    Process bash (pid: 491, stack limit = 0x000000004ebd4ecd)
    Call trace:
     page_mapping+0x18/0x118
     __dump_page+0x1c/0x398
     dump_page+0xc/0x18
     remove_store+0xbc/0x120
     dev_attr_store+0x18/0x28
     sysfs_kf_write+0x40/0x50
     kernfs_fop_write+0x130/0x1d8
     __vfs_write+0x30/0x180
     vfs_write+0xb4/0x1a0
     ksys_write+0x60/0xd0
     __arm64_sys_write+0x18/0x20
     el0_svc_common+0x94/0xf8
     el0_svc_handler+0x68/0x70
     el0_svc+0x8/0xc
    Code: f9400401 d1000422 f240003f 9a801040 (f9400402)
    ---[ end trace cdb5eb5bf435cecb ]---

Fix that by not inspecting the mapping until we've determined that it's
likely to be valid.  Now the above condition still ends up stopping the
kernel, but in the correct manner:

    page:ffffffbf20000000 is uninitialized and poisoned
    raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
    raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
    page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
    ------------[ cut here ]------------
    kernel BUG at ./include/linux/mm.h:1006!
    Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
    Modules linked in:
    CPU: 1 PID: 483 Comm: bash Not tainted 5.0.0-rc1+ #3
    Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
    pstate: 40000005 (nZcv daif -PAN -UAO)
    pc : remove_store+0xbc/0x120
    lr : remove_store+0xbc/0x120
    ...

Link: http://lkml.kernel.org/r/03b53ee9d7e76cda4b9b5e1e31eea080db033396.1550071778.git.robin.murphy@arm.com
Fixes: 1c6fb1d8 ("mm: print more information about mapping in __dump_page")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tetsuo has reported that creating a thousands of processes sharing MM
without SIGHAND (aka alien threads) and setting
/proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1]
to finish.  This is especially worrisome that all that printing is done
under RCU lock and this can potentially trigger RCU stall or softlockup
detector.

The primary reason for the printk was to catch potential users who might
depend on the behavior prior to 44a70ade ("mm, oom_adj: make sure
processes sharing mm have same view of oom_score_adj") but after more
than 2 years without a single report I guess it is safe to simply remove
the printk altogether.

The next step should be moving oom_score_adj over to the mm struct and
remove all the tasks crawling as suggested by [2]

[1] http://lkml.kernel.org/r/97fce864-6f75-bca5-14bc-12c9f890e740@i-love.sakura.ne.jp
[2] http://lkml.kernel.org/r/20190117155159.GA4087@dhcp22.suse.cz

Link: http://lkml.kernel.org/r/20190212102129.26288-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Enabling SLUB_DEBUG's SLAB_CONSISTENCY_CHECKS with KASAN_SW_TAGS
triggers endless false positives during boot below due to
check_valid_pointer() checks tagged pointers which have no addresses
that is valid within slab pages:

  BUG radix_tree_node (Tainted: G    B            ): Freelist Pointer check fails
  -----------------------------------------------------------------------------

  INFO: Slab objects=69 used=69 fp=0x          (null) flags=0x7ffffffc000200
  INFO: Object @offset=15060037153926966016 fp=0x

  Redzone: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 18 6b 06 00 08 80 ff d0  .........k......
  Object : 18 6b 06 00 08 80 ff d0 00 00 00 00 00 00 00 00  .k..............
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Redzone: bb bb bb bb bb bb bb bb                          ........
  Padding: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G    B             5.0.0-rc5+ #18
  Call trace:
    dump_backtrace+0x0/0x450
    show_stack+0x20/0x2c
    __dump_stack+0x20/0x28
    dump_stack+0xa0/0xfc
    print_trailer+0x1bc/0x1d0
    object_err+0x40/0x50
    alloc_debug_processing+0xf0/0x19c
    ___slab_alloc+0x554/0x704
    kmem_cache_alloc+0x2f8/0x440
    radix_tree_node_alloc+0x90/0x2fc
    idr_get_free+0x1e8/0x6d0
    idr_alloc_u32+0x11c/0x2a4
    idr_alloc+0x74/0xe0
    worker_pool_assign_id+0x5c/0xbc
    workqueue_init_early+0x49c/0xd50
    start_kernel+0x52c/0xac4
  FIX radix_tree_node: Marking all objects used

Link: http://lkml.kernel.org/r/20190209044128.3290-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When CONFIG_KASAN_SW_TAGS is enabled, ptr_addr might be tagged.  Normally,
this doesn't cause any issues, as both set_freepointer() and
get_freepointer() are called with a pointer with the same tag.  However,
there are some issues with CONFIG_SLUB_DEBUG code.  For example, when
__free_slub() iterates over objects in a cache, it passes untagged
pointers to check_object().  check_object() in turns calls
get_freepointer() with an untagged pointer, which causes the freepointer
to be restored incorrectly.

Add kasan_reset_tag to freelist_ptr(). Also add a detailed comment.

Link: http://lkml.kernel.org/r/bf858f26ef32eb7bd24c665755b3aee4bc58d0e4.1550103861.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CONFIG_SLAB_FREELIST_HARDENED hashes freelist pointer with the address of
the object where the pointer gets stored.  With tag based KASAN we don't
account for that when building freelist, as we call set_freepointer() with
the first argument untagged.  This patch changes the code to properly
propagate tags throughout the loop.

Link: http://lkml.kernel.org/r/3df171559c52201376f246bf7ce3184fe21c1dc7.1549921721.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With tag based KASAN page_address() looks at the page flags to see whether
the resulting pointer needs to have a tag set.  Since we don't want to set
a tag when page_address() is called on SLAB pages, we call
page_kasan_tag_reset() in kasan_poison_slab().  However in allocate_slab()
page_address() is called before kasan_poison_slab().  Fix it by changing
the order.

[andreyknvl@google.com: fix compilation error when CONFIG_SLUB_DEBUG=n]
  Link: http://lkml.kernel.org/r/ac27cc0bbaeb414ed77bcd6671a877cf3546d56e.1550066133.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/cd895d627465a3f1c712647072d17f10883be2a1.1549921721.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak keeps two global variables, min_addr and max_addr, which store
the range of valid (encountered by kmemleak) pointer values, which it
later uses to speed up pointer lookup when scanning blocks.

With tagged pointers this range will get bigger than it needs to be.  This
patch makes kmemleak untag pointers before saving them to min_addr and
max_addr and when performing a lookup.

Link: http://lkml.kernel.org/r/16e887d442986ab87fe87a755815ad92fa431a5f.1550066133.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Right now we call kmemleak hooks before assigning tags to pointers in
KASAN hooks.  As a result, when an objects gets allocated, kmemleak sees a
differently tagged pointer, compared to the one it sees when the object
gets freed.  Fix it by calling KASAN hooks before kmemleak's ones.

Link: http://lkml.kernel.org/r/cd825aa4897b0fc37d3316838993881daccbe9f5.1549921721.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When an object is kmalloc()'ed, two hooks are called: kasan_slab_alloc()
and kasan_kmalloc().  Right now we assign a tag twice, once in each of the
hooks.  Fix it by assigning a tag only in the former hook.

Link: http://lkml.kernel.org/r/ce8c6431da735aa7ec051fd6497153df690eb021.1549921721.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The system call, get_mempolicy() [1], passes an unsigned long *nodemask
pointer and an unsigned long maxnode argument which specifies the length
of the user's nodemask array in bits (which is rounded up).  The manual
page says that if the maxnode value is too small, get_mempolicy will
return EINVAL but there is no system call to return this minimum value.
To determine this value, some programs search /proc/<pid>/status for a
line starting with "Mems_allowed:" and use the number of digits in the
mask to determine the minimum value.  A recent change to the way this line
is formatted [2] causes these programs to compute a value less than
MAX_NUMNODES so get_mempolicy() returns EINVAL.

Change get_mempolicy(), the older compat version of get_mempolicy(), and
the copy_nodes_to_user() function to use nr_node_ids instead of
MAX_NUMNODES, thus preserving the defacto method of computing the minimum
size for the nodemask array and the maxnode argument.

[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/1545405631-6808-1-git-send-email-longman@redhat.com

Link: http://lkml.kernel.org/r/20190211180245.22295-1-rcampbell@nvidia.com
Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert ff1522bb ("initramfs: cleanup incomplete rootfs").

Andy reports

: This breaks my setup where I have U-boot provided more size of initramfs
: than needed.  This allows a bit of flexibility to increase or decrease
: initramfs compressed image without taking care of bootloader.  The proper
: solution is to do this if we sure that we didn't get enough memory,
: otherwise I can't consider the error fatal to clean up rootfs.

Fixes: ff1522bb ("initramfs: cleanup incomplete rootfs")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: David Engraf <david.engraf@sysgo.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "Here are a few last-minute fixes for 5.0.

  The most significant one is the OF-node refcount fix for ASoC
  simple-card, which could be triggered on many boards. Another fix for
  ASoC core is for the error handling in topology, while others are
  device-specific fixes for Samsung and HD-audio"

* tag 'sound-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: simple-card: fixup refcount_t underflow
  ASoC: topology: free created components in tplg load error
  ALSA: hda/realtek: Disable PC beep in passthrough on alc285
  ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5
  ASoC: samsung: i2s: Fix prescaler setting for the secondary DAI

Pull pin control fixes from Linus Walleij:
 "Some final pin control fixes (I hope) to round off the v5.0 pin
  control development cycle.

  Only driver fixes, one for stable:

   - Meson8B fixup for the sdc pins

   - Fix SDC tile position for Qualcomm QCS404"

* tag 'pinctrl-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins
  pinctrl: qcom: qcs404: Correct SDC tile

Pull GPIO fixes from Linus Walleij:
 "Two GPIO fixes for the v5.0 series:

   - Per-instance irqchip on the MT7621

   - Avoid direction setting using pin control on MMP2"

* tag 'gpio-v5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
  gpio: MT7621: use a per instance irq_chip structure

Pull MTD fixes from Boris Brezillon:

 - Don't add a digit to MTD-backed nvmem device names

 - Make sure powernv flash names are unique

* tag 'mtd/fixes-for-5.0-rc8' of git://git.infradead.org/linux-mtd:
  mtd: powernv_flash: Fix device registration error
  mtd: Use mtd->name when registering nvmem device

Merge branch 'fixes-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull keys fixes from James Morris:

 - Handle quotas better, allowing full quota to be reached.

 - Fix the creation of shortcuts in the assoc_array internal
   representation when the index key needs to be an exact multiple of
   the machine word size.

 - Fix a dependency loop between the request_key contruction record and
   the request_key authentication key. The construction record isn't
   really necessary and can be dispensed with.

 - Set the timestamp on a new key rather than leaving it as 0. This
   would ordinarily be fine - provided the system clock is never set to
   a time before 1970

* 'fixes-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  keys: Timestamp new keys
  keys: Fix dependency loop between construction record and auth key
  assoc_array: Fix shortcut creation
  KEYS: allow reaching the keys quotas exactly

Pull networking fixes from David Miller:

 1) Fix suspend and resume in mt76x0u USB driver, from Stanislaw
    Gruszka.

 2) Missing memory barriers in xsk, from Magnus Karlsson.

 3) rhashtable fixes in mac80211 from Herbert Xu.

 4) 32-bit MIPS eBPF JIT fixes from Paul Burton.

 5) Fix for_each_netdev_feature() on big endian, from Hauke Mehrtens.

 6) GSO validation fixes from Willem de Bruijn.

 7) Endianness fix for dwmac4 timestamp handling, from Alexandre Torgue.

 8) More strict checks in tcp_v4_err(), from Eric Dumazet.

 9) af_alg_release should NULL out the sk after the sock_put(), from Mao
    Wenan.

10) Missing unlock in mac80211 mesh error path, from Wei Yongjun.

11) Missing device put in hns driver, from Salil Mehta.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  sky2: Increase D3 delay again
  vhost: correctly check the return value of translate_desc() in log_used()
  net: netcp: Fix ethss driver probe issue
  net: hns: Fixes the missing put_device in positive leg for roce reset
  net: stmmac: Fix a race in EEE enable callback
  qed: Fix iWARP syn packet mac address validation.
  qed: Fix iWARP buffer size provided for syn packet processing.
  r8152: Add support for MAC address pass through on RTL8153-BD
  mac80211: mesh: fix missing unlock on error in table_path_del()
  net/mlx4_en: fix spelling mistake: "quiting" -> "quitting"
  net: crypto set sk to NULL when af_alg_release.
  net: Do not allocate page fragments that are not skb aligned
  mm: Use fixed constant in page_frag_alloc instead of size + 1
  tcp: tcp_v4_err() should be more careful
  tcp: clear icsk_backoff in tcp_write_queue_purge()
  net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
  qmi_wwan: apply SET_DTR quirk to Sierra WP7607
  net: stmmac: handle endianness in dwmac4_get_timestamp
  doc: Mention MSG_ZEROCOPY implementation for UDP
  mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable
  ...

Another platform requires even longer delay to make the device work
correctly after S3.

So increase the delay to 300ms.

BugLink: https://bugs.launchpad.net/bugs/1798921Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When fail, translate_desc() returns negative value, otherwise the
number of iovs. So we should fail when the return value is negative
instead of a blindly check against zero.

Detected by CoverityScan, CID# 1442593:  Control flow issues  (DEADCODE)

Fixes: cc5e7107 ("vhost: log dirty page correctly")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'asoc-fix-v5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.0

A few small fixes, a driver fix for Samsung, a fix for refcounting of
of_nodes in the simple-card driver that triggered on a lot of systems
and a fix for topology error handling.

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Follow up patch to fix a compilation warning in a recent IPVS fix:
   098e13f5 ("ipvs: fix dependency on nf_defrag_ipv6").

2) Bogus ENOENT error on flush after rule deletion in the same batch,
   reported by Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent commit below has introduced a bug in netcp driver that causes
the ethss driver probe failure and thus break the networking function
on K2 SoCs such as K2HK, K2L, K2E etc. This patch fixes the issue to
restore networking on the above SoCs.

Fixes: 21c328dc ("net: ethernet: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the missing device reference release-after-use in
the positive leg of the roce reset API of the HNS DSAF.

Fixes: c969c6e7 ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2019-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.0

Hopefully the last set of fixes for 5.0, only fix this time.

mt76

* fix regression with resume on mt76x0u USB devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We are saving the status of EEE even before we try to enable it. This
leads to a race with XMIT function that tries to arm EEE timer before we
set it up.

Fix this by only saving the EEE parameters after all operations are
performed with success.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: d765955d ("stmmac: add the Energy Efficient Ethernet support")
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kalderon says:

====================
qed: iWARP - fix some syn related issues.

This series fixes two bugs related to iWARP syn processing flow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The ll2 forwards all syn packets to the driver without validating the mac
address. Add validation check in the driver's iWARP listener flow and drop
the packet if it isn't intended for the device.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The assumption that the maximum size of a syn packet is 128 bytes
is wrong. Tunneling headers were not accounted for.
Allocate buffers large enough for mtu.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8099b047 ("exec: load_script: don't blindly truncate
shebang string") was trying to protect against a confused exec of a
truncated interpreter path. However, it was overeager and also refused
to truncate arguments as well, which broke userspace, and it was
reverted. This attempts the protection again, but allows arguments to
remain truncated. In an effort to improve readability, helper functions
and comments have been added.
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Graham Christensen <graham@grahamc.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTL8153-BD is used in Dell DA300 type-C dongle.
It should be added to the whitelist of devices to activate MAC address
pass through.

Per confirming with Realtek all devices containing RTL8153-BD should
activate MAC pass through and there won't use pass through bit on efuse
like in RTL8153-AD.
Signed-off-by: David Chen <david.chen7@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

spin_lock_bh() is used in table_path_del() but rcu_read_unlock()
is used for unlocking. Fix it by using spin_unlock_bh() instead
of rcu_read_unlock() in the error handling case.

Fixes: b4c3fbe6 ("mac80211: Use linked list instead of rhashtable walk for mesh tables")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a en_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KASAN has found use-after-free in sockfs_setattr.
The existed commit 6d8c50dc ("socket: close race condition between sock_close()
and sockfs_setattr()") is to fix this simillar issue, but it seems to ignore
that crypto module forgets to set the sk to NULL after af_alg_release.

KASAN report details as below:
BUG: KASAN: use-after-free in sockfs_setattr+0x120/0x150
Write of size 4 at addr ffff88837b956128 by task syz-executor0/4186

CPU: 2 PID: 4186 Comm: syz-executor0 Not tainted xxx + #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xca/0x13e
 print_address_description+0x79/0x330
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x18a/0x2e0
 ? sockfs_setattr+0x120/0x150
 sockfs_setattr+0x120/0x150
 ? sock_register+0x2d0/0x2d0
 notify_change+0x90c/0xd40
 ? chown_common+0x2ef/0x510
 chown_common+0x2ef/0x510
 ? chmod_common+0x3b0/0x3b0
 ? __lock_is_held+0xbc/0x160
 ? __sb_start_write+0x13d/0x2b0
 ? __mnt_want_write+0x19a/0x250
 do_fchownat+0x15c/0x190
 ? __ia32_sys_chmod+0x80/0x80
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 __x64_sys_fchownat+0xbf/0x160
 ? lockdep_hardirqs_on+0x39a/0x5e0
 do_syscall_64+0xc8/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462589
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89
ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3
48 c7 c1 bc ff ff
ff f7 d8 64 89 01 48
RSP: 002b:00007fb4b2c83c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000104
RAX: ffffffffffffffda RBX: 000000000072bfa0 RCX: 0000000000462589
RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000007
RBP: 0000000000000005 R08: 0000000000001000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb4b2c846bc
R13: 00000000004bc733 R14: 00000000006f5138 R15: 00000000ffffffff

Allocated by task 4185:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x14a/0x350
 sk_prot_alloc+0xf6/0x290
 sk_alloc+0x3d/0xc00
 af_alg_accept+0x9e/0x670
 hash_accept+0x4a3/0x650
 __sys_accept4+0x306/0x5c0
 __x64_sys_accept4+0x98/0x100
 do_syscall_64+0xc8/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4184:
 __kasan_slab_free+0x12e/0x180
 kfree+0xeb/0x2f0
 __sk_destruct+0x4e6/0x6a0
 sk_destruct+0x48/0x70
 __sk_free+0xa9/0x270
 sk_free+0x2a/0x30
 af_alg_release+0x5c/0x70
 __sock_release+0xd3/0x280
 sock_close+0x1a/0x20
 __fput+0x27f/0x7f0
 task_work_run+0x136/0x1b0
 exit_to_usermode_loop+0x1a7/0x1d0
 do_syscall_64+0x461/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Syzkaller reproducer:
r0 = perf_event_open(&(0x7f0000000000)={0x0, 0x70, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext}, 0x0, 0x0,
0xffffffffffffffff, 0x0)
r1 = socket$alg(0x26, 0x5, 0x0)
getrusage(0x0, 0x0)
bind(r1, &(0x7f00000001c0)=@alg={0x26, 'hash\x00', 0x0, 0x0,
'sha256-ssse3\x00'}, 0x80)
r2 = accept(r1, 0x0, 0x0)
r3 = accept4$unix(r2, 0x0, 0x0, 0x0)
r4 = dup3(r3, r0, 0x0)
fchownat(r4, &(0x7f00000000c0)='\x00', 0x0, 0x0, 0x1000)

Fixes: 6d8c50dc ("socket: close race condition between sock_close() and sockfs_setattr()")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit da215354 ("ASoC: simple-card: merge simple-scu-card")
merged simple-card and simple-scu-card. Then it had refcount
underflow bug. This patch fixup it.
We will get below error without this patch.

	OF: ERROR: Bad of_node_put() on /sound
	CPU: 3 PID: 237 Comm: kworker/3:1 Not tainted 5.0.0-rc6+ #1514
	Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
	Workqueue: events deferred_probe_work_func
	Call trace:
	 dump_backtrace+0x0/0x150
	 show_stack+0x24/0x30
	 dump_stack+0xb0/0xec
	 of_node_release+0xd0/0xd8
	 kobject_put+0x74/0xe8
	 of_node_put+0x24/0x30
	 __of_get_next_child+0x50/0x70
	 of_get_next_child+0x40/0x68
	 asoc_simple_card_probe+0x604/0x730
	 platform_drv_probe+0x58/0xa8
	 ...
Reported-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Topology resources are no longer needed if any element failed to load.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'mailbox-fixes-v5.0-rc7' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox fixes from Jassi Brar:

 - API: Fix build breakge by exporting the function mbox_flush

 - BRCM: Fix FlexRM ring flush timeout issue

* tag 'mailbox-fixes-v5.0-rc7' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue
  mailbox: Export mbox_flush()

Pull ARM fixes from Russell King:
 "A few ARM fixes:

   - Dietmar Eggemann noticed an issue with IRQ migration during CPU
     hotplug stress testing.

   - Mathieu Desnoyers noticed that a previous fix broke optimised
     kprobes.

   - Robin Murphy noticed a case where we were not clearing the dma_ops"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8835/1: dma-mapping: Clear DMA ops on teardown
  ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction
  ARM: 8824/1: fix a migrating irq bug when hotplug cpu

Pull tracing fixes from Steven Rostedt:
 "Two more tracing fixes

   - Have kprobes not use copy_from_user() to access kernel addresses,
     because kprobes can legitimately poke at bad kernel memory, which
     will fault. Copy from user code should never fault in kernel space.
     Using probe_mem_read() can handle kernel address space faulting.

   - Put back the entries counter in the tracing output that was
     accidentally removed"

* tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix number of entries in trace header
  kprobe: Do not use uaccess functions to access kernel memory that can fault

RING_CONTROL reg was not written due to wrong address, hence all
the subsequent ring flush was timing out.

Fixes: a371c10e ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>