- 28 Nov, 2006 9 commits
-
-
Burman Yan authored
Signed-off-by: Yan Burman <yan_952@hotmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Randy Dunlap authored
Fix printk format warning: drivers/mtd/maps/physmap.c:93: warning: long long unsigned int format, long unsigned int arg (arg 2) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-
Vitaly Wool authored
As was discussed between Ricard Wanderlöf, David Woodhouse, Artem Bityutskiy and me, the current API for reading/writing OOB is confusing. The thing that introduces confusion is the need to specify ops.len together with ops.ooblen for reads/writes that concern only OOB not data area. So, ops.len is overloaded: when ops.datbuf != NULL it serves to specify the length of the data read, and when ops.datbuf == NULL, it serves to specify the full OOB read length. The patch inlined below is the slightly updated version of the previous patch serving the same purpose, but with the new Artem's comments taken into account. Artem, BTW, thanks a lot for your valuable input! Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Richard Purdie authored
Currently, mtd_blkdevs enforces a block size of 512, even if the drivers can seemingly request a different size. This patch fixes mtd_blkdevs so block sizes other than 512 work correctly. Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Dave Olsen authored
Add support for accessing BIOS flash chips connected to the NVIDIA ck804 southbridge. Signed-off-by: Ryan Jackson <rjackson@lnxi.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Stefan Roese authored
The writel() call accidentally clears all bits in the NDFC_CCR register (endianess problem). Now __raw_writel() is used instead. Tested on Bamboo with NAND on chip select 0 and chip select 1. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Adrian Bunk authored
This patch makes the needlessly global mtdpart_setup() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Adrian Bunk authored
This patch converts drivers/mtd/nand/rtc_from4.c to use the new lib/bitrev.c Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 01 Nov, 2006 1 commit
-
-
David Woodhouse authored
We were resetting cafe->ctl2 to zero after an erase (and also during a write, but it was correctly reset after that). This meant that ECC reads after an erase were failing. Doh. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 31 Oct, 2006 2 commits
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Also use cafe_readl() and cafe_writel() abstraction to make code slightly cleaner -- especially if we want to use it in PIO mode. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 28 Oct, 2006 1 commit
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 27 Oct, 2006 5 commits
-
-
David Woodhouse authored
They fixed the hardware so that ECC doesn't fail on reading an empty block. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Fixes http://dev.laptop.org/ticket/237Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Being a value which isn't in the table is a case we explicitly check for in the caller. Don't BUG_ON() because it does actually happen in practice. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 26 Oct, 2006 1 commit
-
-
Ricard Wanderlöf authored
When a flash-based BBT is not used, nand_default_mark_blockbad() is supposed to mark the block bad in the oob. However, it sets the wrong length variable so that no bad block marker is in fact written. This patch attempts to rectify that. (As note, it seems to be that logically, it shouldn't be necessary to set both length variables, as one appears to be for the main buffer, and one for the oob buffer, but this is how it is done in several places, including the code for the mtd character device MEMWRITEOOB and MEMREADOOB ioctls. I'm not sure if this is a temporary solution during some rework of the mtd infrastructure, or whether there is a deeper thought here.) Signed-off-by: Ricard Wanderlöf <ricardw@axis.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 23 Oct, 2006 1 commit
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 22 Oct, 2006 4 commits
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
git://git.infradead.org/~dwmw2/cafe-2.6David Woodhouse authored
Conflicts: drivers/mtd/nand/Kconfig
-
David Woodhouse authored
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
- 21 Oct, 2006 16 commits
-
-
David Woodhouse authored
Ditch the separate oobrbuf and oobwbuf fields from the chip buffers, and use only a single buffer immediately after the data. This accommodates NAND controllers such as the OLPC CAFÉ chip, which can't do scatter/gather DMA so needs the OOB buffer to be contiguous with the data, for both read and write. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Artem Bityutskiy authored
As flash cannot do 0->1 bit transitions when programming, do not do this in the simulator too. This makes nandsim able to accept subpage writes. Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
David Anders authored
During some testing with several samsung s3c24xx based devices it was discovered that often the cfi_cmdset_0001.c would not leave the chip in read-array mode on suspend. this is an issue if the same flash chip is used for the bootloader that needs to be read on resume. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Artem Bityutskiy authored
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Vijay Kumar authored
Removes line break after return type in function definitions, to be consistent with the Linux coding style. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Vijay Kumar authored
For page wise allocation, an array of flash page pointers is allocated during initialization. The flash pages are themselves allocated when a write occurs to the page. The flash pages are deallocated when they are erased. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Vijay Kumar authored
This patch removes code that does chip mapping. The chip mapping code is no longer used. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Yoichi Yuasa authored
This patch has removed ITE 8172G and Globespan IVR MTD support. These boards support have already been removed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Bächle <ralf@linux-mips.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Ricard Wanderlöf authored
1. The ECCGETLAYOUT ioctl copy_to_user() call has a superfluous '&' causing the resulting information to be garbage rather than the intended mtd->ecclayout. 2. The MEMGETOOBSEL misses copying mtd->ecclayout->eccbytes so the resulting field of the returned structure contains garbage. Signed-off-by: Ricard Wanderlöf <ricardw@axis.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Andrew Victor authored
This version only differs from version posted by Savin Zlobec (20 Jun 2006) in that the AT91RM9200-specific chip-select / bus setup code has been moved from the at91_nand.c driver into the processor-specific file. From: Savin Zlobec <savin@epico.si> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Qi Yong authored
typo fix: noticed this typo while reading the patch "jffs2: fix symlink error handling" Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Alan Cox authored
Fairly self explanatory. Keep a reference initially, drop it when we free up the driver resources. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Akinobu Mita authored
Use rb_first() and rb_last() to implement frag_first() and frag_last(). Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Lew Glendenning authored
Add MTD map driver for BIOS flash chips connected to the Intel ESB2 southbridge. [akpm@osdl.org: coding-style fixes, build fix] Signed-off-by: Ryan Jackson <rjackson@lnxi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-