This patch adds exit operations for the Sound Blaster ZxR.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds a control for 600 ohm gain on the Sound Blaster ZxR.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch removes the input select control for the ZxR, as it only has
one input option, rear microphone.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds commands for selecting input and output on the Sound
Blaster ZxR. The ZxR has no front panel header, and has line-in on the
separate daughter board, so it only does rear-mic.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds commands for setting up the ZxR after the DSP is
downloaded. The ZxR already shares most of the post-download commands
from the regular Sound Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds init commands for the main Sound Blaster ZxR card.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds separate hda_codec_ops for the DBPro daughter board, as
it behaves more like a generic HDA codec than the other ca0132 cards,
despite having a ca0132 on board.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds a pincfg for the ZxR, and defines which pins are used
for both.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds quirk ID's for the ZxR and it's daughter board, the
DBPro. It also adds a function for determining the quirk for each board
through HDA subsytem ID's instead of PCI subsystem ID's.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch fixes an issue where if surround sound was the selected
output and output effects were enabled, the sound wasn't sent to all
channels correctly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch corrects the control type of the additional AE-5 controls
added in a previous patch from HDA_INPUT to HDA_OUTPUT.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA timer core has a comment referring to 'SNDRV_MIXER_PSFLG_*' in
a definition of 'struct snd_timer_params' of UAPI header. I can see
this in initial state of ALSA timer core, at least in
'alsa-driver-0.4.0.tar.gz'.

This commit fixes the comment.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

E.g. for snd_hdac_ext_bus_link_power_up(), we should set mask to be
AZX_MLCTL_SPA(it was 0), and AZX_MLCTL_SPA as value to power up it,
here correct it and several similar mismatches.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds exit commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds controls for the AE-5's headphone gain setting, and the
DAC's interpolation filter setting.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds output selection commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch cleans up ca0132_alt_out_select by moving the card specific
output commands into a separate function. As more cards are added, the
function ca0132_alt_out_select is going to get more bloated with these,
so moving into a separate function tries to keep that from happening.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds DSP setup functions for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch cleans up some of the formatting of the post-dsp load setup
functions, and also merges some of the sub functions into individual
ones.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename
this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set
the AE-5 and Recon3D to use it as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds AE-5 specific stuff to the ca0132_alt_init function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds AE-5 pre-init functions that happen before the main
ca0132_alt_init, and gives functions related to the ca0113 a ca0113
prefix instead of ca0132. It also adds functions to write to the 8051's
SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds the unique writes for the AE-5 on startup to
ca0132_mmio_init. The other cards share some addresses written to, but
use different values.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch sets the bool values for the AE-5, as well as selects the
mixer it will use.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up
the function it's assigned in.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch defines some new verbs found from reverse engineering of the
onboard 8051 CPU, and a control param found there as well. This clears
up usage of these verbs in other parts of the driver, and removes their
usage where they're now known to be unnecessary.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_pcm_ops are not supposed to change. So mark the
non-const structs as const. Also, refine indentation
to ncrease readability.
Signed-off-by: Nick Simonov <nicksimonovv@gmail.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The interrupt handler has to be acquired after the other resource
initialization when allocated with IRQF_SHARED.  Otherwise it's
triggered before the resource gets ready, and may lead to unpleasant
behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When CONFIG_X86=n function azx_snoop doesn't use the variable chip it
only returns true.

sound/pci/hda/hda_intel.c: In function ‘dma_alloc_pages’:
sound/pci/hda/hda_intel.c:2002:14: warning: unused variable ‘chip’ [-Wunused-variable]
  struct azx *chip = bus_to_azx(bus);
              ^~~~

Create a inline function of azx_snoop.

Fixes: a41d1224 ("ALSA: hda - Embed bus into controller object")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This ensures the transfer loop won't waste a run to read
the few frames (if any) between start and hw_ptr update.
It will wait for the next interrupt with wait_for_avail().
Signed-off-by: Ricardo Biehl Pasquali <pasqualirb@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

We shouldn't set up the indirect PCM parameters at trigger but they
should be set at prepare.  Also, remove a useless debug message, too.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.

Also, with the proper ack callback, we need no longer prefill at
trigger start.  The relevant code can be killed.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.

Also, with the proper ack callback, we need no longer prefill at
trigger start.  The relevant code can be killed.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

E.g. for snd_hdac_ext_link_clear_stream_id(), we should set (1 << stream)
as mask, and 0 as value, here correct it and several similar mismatches.

And, here also remove unreadable register_mask usage for those mask value
updating.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>