- 04 Jun, 2013 28 commits
-
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
pfc-r8a7778 will have many devices pfc support in the future, and current pfc-r8a7778 is using pin/mux definition macro for SCIF. The device definition style using macro is readable code IMO, but creating new macro for each devices is not good sense. This patch adds common SH_PFC_xx() macro for each new feature devices Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
Add VIN DATA[0:7]/CLK/HSYNC/VSYNC pin groups to R8A7779 PFC driver. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [horms+renesas@verge.net.au: trivial rebase on top of "sh-pfc: r8a7779: Don't group USB OVC and PENC pins"] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Use the RCAR_GP_PIN macro to convert from the documentation pin number space to the linear pinctrl space. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Bastian Hecht authored
Add SCIFA1 as preparation to switch to pinctrl in board files. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms@verge.net.au>
-
Laurent Pinchart authored
Refactor the GPIO macro magic to use GPIO numbers directly instead of the GPIO_GP_x_y enum entries. This will allow removing the GPIO enum entries from the mach/r8a7790.h header. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
No r8a7770 platform use the function GPIOs API. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au: fixed typo in changelog: r8a7779 -> r8a7770] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
GPIOs are now handled by a separate driver, remove GPIO data from the SoC information structure. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Make GPIO support optional for platforms that don't support GPIOLIB. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Bastian Hecht authored
We add all necessary entries to support the external IRQs from the INTC. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Koji Matsuoka authored
Add initial PFC support for the r8a7790 SoC. At this point only GPIO interface is supported, move to newer interfaces planned as incremental changes. Original authors is Koji Matsuoka-san, thanks for him and his team for the heavy lifting. Adjusted by Magnus to work together with updated code in drivers/pinctrl. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@rms.renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
R-Car series gpio_rcar driver can control GPIO IRQ today. It needs base IRQ number for gpio_rcar_config :: .irq_base This patch adds macro for GPIO IRQ. This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Pins are numbered in the R-Car family documentation using a bank number and a pin number in the bank. As the Linux pin number space is linear, we need to flatten this by multiplying the bank number by 32 and adding the pin number. The resulting number bear no directly visible relationship to the documentation, making it error-prone. Add a RCAR_GP_PIN macro to convert from the documentation pin number space to the linear Linux space. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au: non-trivial rebase on top of "sh-pfc: r8a7779: Don't group USB OVC and PENC pins"] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. The motivation for this is to allow use of the gpio-keys driver on the lager board which is based on the r8a7790 SoC. The V2 of this patch has been fully exercised using that driver on that board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The gpio_base field is used to specify the desired GPIO base for the GPIO controller. The GPIO core can automatically allocate a GPIO number range when the base is set to -1. To make this possible, make the field signed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
R-Car H1 or Gen2 GPIO interrupts are assigned per each GPIO domain, but, Gen1 E1/M1 GPIO interrupts are shared for all GPIO domain. gpio-rcar driver needs IRQF_SHARED flags for these. This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Update the CMT clockevent rating from 125 to 80. This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b ("ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real"). The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The USB_OVCn pins are alternate options for USB over-current detection when using a 3.3V USB interface. As they're not mandatory they can be used independently of the USB PENC pins. Don't group the USB_OVCn and PENC pins to avoid conflicts when the USB_OVCn pins are used by another function. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- 20 May, 2013 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Regression fix in xen privcmd fixing a memory leak. - Add Documentation for tmem driver. - Simplify and remove code in the tmem driver. - Cleanups. * tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fixed assignment error in if statement xen/xenbus: Fixed over 80 character limit issue xen/xenbus: Fixed indentation error in switch case xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off. xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead. xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the boot options and fold them in the tmem.X parameters. xen/tmem: s/disable_// and change the logic. xen/tmem: Fix compile warning. xen/tmem: Split out the different module/boot options. xen/tmem: Move all of the boot and module parameters to the top of the file. xen/tmem: Cleanup. Remove the parts that say temporary. xen/privcmd: fix condition in privcmd_close()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: - Error path fixes for abituguru and iio_hwmon drivers. - Drop erroneously created attributes from nct6775 driver. - Drop redundant safety on cache lifetime for tmp401 driver. - Add explicit maintainer for LM95234 and TMP401 drivers. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers hwmon: (tmp401) Drop redundant safety on cache lifetime hwmon: fix error return code in abituguru_probe() hwmon: (iio_hwmon) Fix null pointer dereference hwmon: (nct6775) Do not create non-existing attributes hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail
-
Linus Torvalds authored
In commit 78d77df7 ("x86-64, init: Do not set NX bits on non-NX capable hardware") we added the early_pmd_flags that gets the NX bit set when a CPU supports NX. However, the new variable was marked __initdata, because the main _use_ of this is in an __init routine. However, the bit setting happens from secondary_startup_64(), which is called not only at bootup, but on every secondary CPU start. Including resuming from STR and at CPU hotplug time. So the value cannot be __initdata. Reported-bisected-and-tested-by: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # v3.9 Acked-by: Peter Anvin <hpa@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lisa Nguyen authored
Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Lisa Nguyen authored
Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Lisa Nguyen authored
Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Linus Torvalds authored
Merge tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: - Three fixes to make the boot path for device tree work properly on the Nomadik pin controller. - Compile warning fix for the vt8500 driver. - Fix error path in pinctrl-single. - Free mappings in error path of the Lantiq controller. - Documentation fixes. * tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/lantiq: Free mapping configs for both pin and groups pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry() pinctrl: generic: Fix typos and clarify comments pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table pinctrl: abx500: Rejiggle platform data and DT initialisation pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild fix from Michal Marek: "In an attempt to improve make rpm-pkg, I broke make binrpm-pkg" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: package: Makefile: unbreak binrpm-pkg target
-
Guenter Roeck authored
I wrote the LM95234 driver and extended the TMP401 driver substantially, and I have hardware to test both, so it makes sense to explicitly maintain them. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
-
- 19 May, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device mapper fix from Alasdair Kergon: "A patch to fix metadata resizing with device-mapper thin devices." * tag 'dm-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: fix metadata dev resize detection
-
Alasdair G Kergon authored
Fix detection of the need to resize the dm thin metadata device. The code incorrectly tried to extend the metadata device when it didn't need to due to a merging error with patch 24347e95 ("dm thin: detect metadata device resizing"). device-mapper: transaction manager: couldn't open metadata space map device-mapper: thin metadata: tm_open_with_sm failed device-mapper: thin: aborting transaction failed device-mapper: thin: switching pool to failure mode Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-