- 11 Sep, 2013 40 commits
-
-
Dave Hansen authored
I was investigating some TLB flush scaling issues and realized that we do not have any good methods for figuring out how many TLB flushes we are doing. It would be nice to be able to do these in generic code, but the arch-independent calls don't explicitly specify whether we actually need to do remote flushes or not. In the end, we really need to know if we actually _did_ global vs. local invalidations, so that leaves us with few options other than to muck with the counters from arch-specific code. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sunghan Suh authored
There is a proper macro to get the corresponding swapper address space from a swap entry. Instead of directly accessing "swapper_spaces" array, use the "swap_address_space" macro. Signed-off-by:
Sunghan Suh <sunghan.suh@samsung.com> Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
correct_wcount and inode in mmap_region() just complicate the code. This boolean was needed previously, when deny_write_access() was called before vma_merge(), now we can simply check VM_DENYWRITE and do allow_write_access() if it is set. allow_write_access() checks file != NULL, so this is safe even if it was possible to use VM_DENYWRITE && !file. Just we need to ensure we use the same file which was deny_write_access()'ed, so the patch also moves "file = vma->vm_file" down after allow_write_access(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Colin Cross <ccross@android.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Oleg Nesterov authored
Simple cleanup. Move "struct inode *inode" variable into "if (file)" block to simplify the code and avoid the unnecessary check. Signed-off-by:
-
Oleg Nesterov authored
mmap() doesn't allow the non-anonymous mappings with VM_GROWS* bit set. In particular this means that mmap_region()->vma_merge(file, vm_flags) must always fail if "vm_flags & VM_GROWS" is set incorrectly. So it does not make sense to check VM_GROWS* after we already allocated the new vma, the only caller, do_mmap_pgoff(), which can pass this flag can do the check itself. And this looks a bit more correct, mmap_region() already unmapped the old mapping at this stage. But if mmap() is going to fail, it should avoid do_munmap() if possible. Note: we check VM_GROWS at the end to ensure that do_mmap_pgoff() won't return EINVAL in the case when it currently returns another error code. Many thanks to Hugh who nacked the buggy v1. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Andrew Morton authored
A few 80-col gymnastics were cleaned up as a result. Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Raymond Jennings authored
It is possible to swapon a swap area that is too big for the pte width to handle. Presently this failure happens silently. Instead, emit a diagnostic to warn the user. Testing results, root prompt commands and kernel log messages: # lvresize /dev/system/swap --size 16G # mkswap /dev/system/swap # swapon /dev/system/swap Jul 7 04:27:22 warfang kernel: Adding 16777212k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:16777212k # lvresize /dev/system/swap --size 64G # mkswap /dev/system/swap # swapon /dev/system/swap Jul 7 04:27:22 warfang kernel: Truncating oversized swap area, only using 33554432k out of 67108860k Jul 7 04:27:22 warfang kernel: Adding 33554428k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:33554428k [akpm@linux-foundation.org: fix warning] Signed-off-by:
Raymond Jennings <shentino@gmail.com> Acked-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Vladimir Cernov authored
This fixes following errors: - ERROR: "(foo*)" should be "(foo *)" - ERROR: "foo ** bar" should be "foo **bar" Signed-off-by:
Vladimir Cernov <gg.kaspersky@gmail.com> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Oleg Nesterov authored
Simple cleanup. Every user of vma_set_policy() does the same work, this looks a bit annoying imho. And the new trivial helper which does mpol_dup() + vma_set_policy() to simplify the callers. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mike Miller authored
At one time we used to set the maximum number of scatter gather elements on all Smart Array controllers to 32. At some point in time the firmware began to write the "appropriate" value for each controller into the config table. The cciss driver would then read that and set h->maxsgentries. h->maxsgentries = readl(&(h->cfgtable->MaxSGElements); On the P600 that value is 544. Under some workloads a significant performance reduction may result. This patch forces the P600 to use only 32 scatter gather elements. Other controllers are not affected. Signed-off-by:Mike Miller <mike.miller@hp.com> Signed-off-by:
Dwight (Bud) Brown <bubrown@redhat.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Acked-by:
Stephen M. Cameron <steve.cameron@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jingoo Han authored
mg_times_out() is used only in this file. Fix the following sparse warning: drivers/block/mg_disk.c:639:6: warning: symbol 'mg_times_out' was not declared. Should it be static? Signed-off-by:
-
Cai Zhiyong authored
Read block device partition table from command line. The partition used for fixed block device (eMMC) embedded device. It is no MBR, save storage space. Bootloader can be easily accessed by absolute address of data on the block device. Users can easily change the partition. This code reference MTD partition, source "drivers/mtd/cmdlinepart.c" About the partition verbose reference "Documentation/block/cmdline-partition.txt" [akpm@linux-foundation.org: fix printk text] [yongjun_wei@trendmicro.com.cn: fix error return code in parse_parts()] Signed-off-by:
Cai Zhiyong <caizhiyong@huawei.com> Cc: Karel Zak <kzak@redhat.com> Cc: "Wanglin (Albert)" <albert.wanglin@huawei.com> Cc: Marius Groeger <mag@sysgo.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Jingoo Han authored
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by:
-
Jingoo Han authored
The use of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by:
-
Oleg Nesterov authored
task_struct->pid/tgid should go away. 1. Change same_thread_group() to use task->signal for comparison. 2. Change has_group_leader_pid(task) to compare task_pid(task) with signal->leader_pid. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Jie Liu authored
Call fiemap ioctl(2) with given start offset as well as an desired mapping range should show extents if possible. However, we somehow figure out the end offset of mapping via 'mapping_end -= cpos' before iterating the extent records which would cause problems if the given fiemap length is too small to a cluster size, e.g, Cluster size 4096: debugfs.ocfs2 1.6.3 Block Size Bits: 12 Cluster Size Bits: 12 The extended fiemap test utility From David: https://gist.github.com/anonymous/6172331 # dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000 # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 0 extents: # Logical Physical Length Flags ^^^^^ <-- No extent is shown In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the loop of searching extent records was not executed at all. This patch remove the in question 'mapping_end -= cpos', and loops until the cpos is larger than the mapping_end as usual. # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 1 extents: # Logical Physical Length Flags 0: 0000000000000000 0000000056a01000 0000000006a00000 0000 Signed-off-by:Jie Liu <jeff.liu@oracle.com> Reported-by:
David Weber <wb@munzinger.de> Tested-by:
-
Joseph Qi authored
Variable ip in dlmfs_get_root_inode() is defined but not used. So clean it up. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
-
Joyce authored
In o2hb_shutdown_slot() and o2hb_check_slot(), since event is defined as local, it is only valid during the call stack. So the following tiny race case may happen in a multi-volumes mounted environment: o2hb-vol1 o2hb-vol2 1) o2hb_shutdown_slot allocate local event1 2) queue_node_event add event1 to global o2hb_node_events 3) o2hb_shutdown_slot allocate local event2 4) queue_node_event add event2 to global o2hb_node_events 5) o2hb_run_event_list delete event1 from o2hb_node_events 6) o2hb_run_event_list event1 empty, return 7) o2hb_shutdown_slot event1 lifecycle ends 8) o2hb_fire_callbacks event1 is already *invalid* This patch lets it wait on o2hb_callback_sem when another thread is firing callbacks. And for performance consideration, we only call o2hb_run_event_list when there is an event queued. Signed-off-by:Joyce <xuejiufei@huawei.com> Signed-off-by:
-
Joseph Qi authored
Since o2nm_get_node_by_num() may return NULL, we add this check in o2net_accept_one() to avoid possible NULL pointer dereference. Signed-off-by:
-
Joseph Qi authored
Code in o2net_handler_tree_lookup() may be corrupted by mistake. So adjust it to promote readability. Signed-off-by:
-
Younger Liu authored
In ocfs2_remove_inode_range(), there is a memory leak. The variable path has allocated memory with ocfs2_new_path_from_et(), but it is not free. Signed-off-by:
Younger Liu <younger.liu@huawei.com> Reviewed-by:
-
Joseph Qi authored
In ocfs2_reflink_xattr_rec(), meta_ac and data_ac are allocated by calling ocfs2_lock_reflink_xattr_rec_allocators(). Once an error occurs when allocating *data_ac, it frees *meta_ac which is allocated before. Here it mistakenly sets meta_ac to NULL but *meta_ac. Then ocfs2_reflink_xattr_rec() will try to free meta_ac again which is already invalid. Signed-off-by:
-
Xue jiufei authored
dlm_do_local_recovery_cleanup() should force clean refmap if the owner of lockres is UNKNOWN. Otherwise node may hang when umounting filesystems. Here's the situation: Node1 Node2 dlmlock() -> dlm_get_lock_resource() send DLM_MASTER_REQUEST_MSG to other nodes. trying to master this lockres, return MAYBE. selected as the master of lockresA, set mle->master to Node1, and do assert_master, send DLM_ASSERT_MASTER_MSG to Node2. Node 2 has interest on lockresA and return DLM_ASSERT_RESPONSE_MASTERY_REF then something happened and Node2 crashed. Receiving DLM_ASSERT_RESPONSE_MASTERY_REF, set Node2 into refmap, and keep sending DLM_ASSERT_MASTER_MSG to other nodes o2hb found node2 down, calling dlm_hb_node_down() --> dlm_do_local_recovery_cleanup() the master of lockresA is still UNKNOWN, no need to call dlm_free_dead_locks(). Set the master of lockresA to Node1, but Node2 stills remains in refmap. When Node1 umount, it found that the refmap of lockresA is not empty and attempted to migrate it to Node2, But Node2 is already down, so umount hang, trying to migrate lockresA again and again. Signed-off-by: -
Younger Liu authored
In ocfs2_xattr_set(), if ocfs2_start_trans failed, meta_ac and data_ac should be free. Otherwise, It would lead to a memory leak. Signed-off-by:
-
Joseph Qi authored
In ocfs2_xattr_value_attach_refcount(), if error occurs when calling ocfs2_xattr_get_clusters(), it will go with unexpected behavior since local variables p_cluster, num_clusters and ext_flags are declared without initialization. Signed-off-by:
-
Jie Liu authored
The ocfs2 path is not properly freed which leads to a memory leak at __ocfs2_move_extents(). This patch stops the leaks of the ocfs2_path structure. Signed-off-by:
-
Joseph Qi authored
In ocfs2_attach_refcount_tree() and ocfs2_duplicate_extent_list(), if error occurs when calling ocfs2_get_clusters(), it will go with unexpected behavior as local variables p_cluster, num_clusters and ext_flags are declared without initialization. Signed-off-by:
-
Joseph Qi authored
In ocfs2_acl_from_xattr(), if size is less than sizeof(struct posix_acl_entry), it returns ERR_PTR(-EINVAL) directly. Then assign (size / sizeof(struct posix_acl_entry)) to count which will be at least 1, that means the following branch (count < 0) and (count == 0) will never be true. Signed-off-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Dong Fang authored
[dan.carpenter@oracle.com: fix up some NULL dereference bugs] Signed-off-by:
Dong Fang <yp.fangdong@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jeff Liu <jeff.liu@oracle.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sunil Mushran authored
Fix some possible null pointer dereferences that were detected by the static code analyser, smatch. Signed-off-by:
Sunil Mushran <sunil.mushran@oracle.com> Reported-by:
Dan Carpenter <error27@gmail.com> Reported-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Younger Liu authored
There is an issue in reserving and claiming space for localalloc, When localalloc space is not enough, it would claim space from global_bitmap. And if there is not enough free space in global_bitmap, the size of claiming space would set to half of orignal size and retry. The issue is as follows: osb->local_alloc_bits is set to half of orignal size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to osb->local_alloc_default_bits which is not changed. localalloc always reserves and claims local_alloc_default_bits space and returns ENOSPC. So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be changed. Signed-off-by:
-
Xue jiufei authored
dlm_request_all_locks() should deal with the status sent from target node if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall into endless loop, waiting for other nodes to send locks and DLM_RECO_DATA_DONE_MSG to me. NodeA NodeB selected as recovery master dlm_remaster_locks() ->dlm_request_all_locks() send DLM_LOCK_REQUEST_MSG to nodeA It happened that NodeA cannot alloc memory when it processes this message. dlm_request_all_locks_handler() do not queue dlm_request_all_locks_worker and returns -ENOMEM. It will never send locks and DLM_RECO_DATA_DONE_MSG to NodeB. NodeB do not deal with the status sent from nodeA, and will fall in endless loop waiting for the recovery state of NodeA to be changed. Signed-off-by: -
Junxiao Bi authored
Though ocfs2 uses inode->i_mutex to protect i_size, there are both i_size_read/write() and direct accesses. Clean up all direct access to eliminate confusion. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Younger Liu authored
The issue scenario is as following: When fallocating a very large disk space for a small file, __ocfs2_extend_allocation attempts to get a very large transaction. For some journal sizes, there may be not enough room for this transaction, and the fallocate will fail. The patch below extends & restarts the transaction as necessary while allocating space, and should work with even the smallest journal. This patch refers ext4 resize. Test: # mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc ...(jounral size is 32M) # mount.ocfs2 /dev/sdc /mnt/ocfs2/ # touch /mnt/ocfs2/1.log # fallocate -o 0 -l 400G /mnt/ocfs2/1.log fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory # tail -f /var/log/messages [ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048) [ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12 [ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12 [ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12 ^C With this patch, the test works well. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Libo Chen <libo.chen@huawei.com> Signed-off-by:
-
Paul Bolle authored
acornfb checks for HAS_VIDC while support for that macro was removed in v2.6.23 (when the arm26 port was removed). So we can remove a bit of dead code. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Oleg Nesterov authored
do_fork() denies CLONE_THREAD | CLONE_PARENT if NEWUSER | NEWPID. Then later copy_process() denies CLONE_SIGHAND if the new process will be in a different pid namespace (task_active_pid_ns() doesn't match current->nsproxy->pid_ns). This looks confusing and inconsistent. CLONE_NEWPID is very similar to the case when ->pid_ns was already unshared, we want the same restrictions so copy_process() should also nack CLONE_PARENT. And it would be better to deny CLONE_NEWUSER && CLONE_SIGHAND as well just for consistency. Kill the "CLONE_NEWUSER | CLONE_NEWPID" check in do_fork() and change copy_process() to do the same check along with ->pid_ns check we already have. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Colin Walters <walters@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
Commit 8382fcac ("pidns: Outlaw thread creation after unshare(CLONE_NEWPID)") nacks CLONE_NEWPID if the forking process unshared pid_ns. This is correct but unnecessary, copy_pid_ns() does the same check. Remove the CLONE_NEWPID check to cleanup the code and prepare for the next change. Test-case: static int child(void *arg) { return 0; } static char stack[16 * 1024]; int main(void) { pid_t pid; assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0); pid = clone(child, stack + sizeof(stack) / 2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid < 0 && errno == EINVAL); return 0; } clone(CLONE_NEWPID) correctly fails with or without this change. Signed-off-by:
-
Oleg Nesterov authored
Commit 8382fcac ("pidns: Outlaw thread creation after unshare(CLONE_NEWPID)") nacks CLONE_VM if the forking process unshared pid_ns, this obviously breaks vfork: int main(void) { assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0); assert(vfork() >= 0); _exit(0); return 0; } fails without this patch. Change this check to use CLONE_SIGHAND instead. This also forbids CLONE_THREAD automatically, and this is what the comment implies. We could probably even drop CLONE_SIGHAND and use CLONE_THREAD, but it would be safer to not do this. The current check denies CLONE_SIGHAND implicitely and there is no reason to change this. Eric said "CLONE_SIGHAND is fine. CLONE_THREAD would be even better. Having shared signal handling between two different pid namespaces is the case that we are fundamentally guarding against." Signed-off-by:
Colin Walters <walters@redhat.com> Acked-by:
-
