- 28 Jan, 2012 3 commits
-
-
Johannes Berg authored
Fix multiple bugs in event tracing: 1) If you enable uCode tracing with the device down, it will still attempt to access the device and continuously log "MAC is in deep sleep!" errors. Fix this by only starting logging when the device is actually alive. 2) Now you can set the flag when the device is down, but logging doesn't happen when you bring it up. To fix that, start logging when the device comes alive. This means we don't log before -- we could do that but I don't need it right now. 3) For some reason we read the error instead of the event log -- use the right pointer. 4) Optimise SRAM reading of event log header. 5) Fix reading write pointer == capacity, which can happen due to racy SRAM access 6) Most importantly: fix an error where we would try to read WAY too many events (like 2^32-300) when we read the wrap counter before it is updated by the uCode -- this does happen in practice and will cause the driver to hang the machine. 7) Finally, change the timer to 10ms instead of 100ms as 100ms is too slow to capture all data with a normal event log and with 100ms the log will wrap multiple times before we have a chance to read it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Wey-Yi Guy authored
Fix few places of typo Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Wey-Yi Guy authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into wireless-next
-
- 27 Jan, 2012 17 commits
-
-
Yogesh Ashok Powar authored
While configuring the broadcast key in the hardware, in multi-BSS environment, BSSes other than first were incorrectly configured with the MAC address of first BSS. Fixing it with correct MAC addresses. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Nicolas Cavallari authored
Currently, when we are on an IBSS network with no active station, we would scan for other BSSID, even if fixed_bssid is on, due to a bug in ibss.c, where fixed_channel would be checked instead of fixed_bssid. This would trigger useless scans where scan results would not be used anyway. This patch also reverts commit 39d02a7d, which assumed that the ifibss->fixed_channel check was legitimate to disable single-channel scans. IBSS single-channel scan should now be fixed. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Eliad Peller authored
The sta might be in psm against the ap (e.g. because this was the before a hw restart), so we explicitly send a null packet in order to make sure it'll sync against the ap (and get out of psm). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
This is a pointer so it should be NULL instead of zero. Sparse complains about this stuff: net/nfc/nci/core.c:447:37: warning: Using plain integer as NULL pointer Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
This enables user to check beacon interval, DTIM period, short slot time and short preamble information using "iw dev mlan0 link" command when station is in connected state. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
Pass mwifiex_private pointer directly to wmm_add_buf_txqueue() instead of passing adapter and then deriving priv again in mwifiex_get_priv_by_id(). This reduces a 'for' loop in TX path. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
This seems to be only needed as workaround for hardware problem on PCI devices. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Zero all other bits than RESET_CSR and RESET_BBP when want to do the reset, that the vendor driver behaviour. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
We can receive frames just after firmware load with current code, so disable DMA just after firmware is loaded, not before. Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Ralink USB driver initialize H2M_INT_SRC to 0 after firmware load, and never touch this register later. It is not touched at all by Ralink PCI driver. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix new kernel-doc warnings: Warning(include/net/cfg80211.h:1165): No description found for parameter 'channel_type' Warning(include/net/cfg80211.h:2090): No description found for parameter 'probe_resp_offload' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
This patch implements a simple way of reducing the output power of the device by a configurable upper limit. Requested-by: Harshal Chhaya <harshal@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Chun-Yeow Yeoh authored
A mesh node that joins the mesh network is by default a forwarding entity. This patch allows the mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the mesh node can prevent itself from forwarding the traffic which is not destined to him. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
It seems that -Wshadow is no longer default in sparse runs, but let's fix the warnings anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
It seems that -Wshadow is no longer default in sparse runs, but let's fix the warnings anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Similar to the previous beacon filtering patch, make CQM RSSI support depend on the flags that the driver set for virtual interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 24 Jan, 2012 20 commits
-
-
John W. Linville authored
Avoids this: CC [M] drivers/net/wireless/orinoco/orinoco_usb.o drivers/net/wireless/orinoco/orinoco_usb.c:1759:13: warning: ‘version’ defined but not used Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Avoids this: CC [M] drivers/net/wireless/ath/ath5k/base.o drivers/net/wireless/ath/ath5k/base.c: In function ‘__check_no_hw_rfkill_switch’: drivers/net/wireless/ath/ath5k/base.c:85:1: warning: return from incompatible pointer type Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Antonio Quartulli authored
Skip group keys configuration in hardware in order to make IBSS RSN work. Keys will be managed using software. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Add the ability to select between multiple targets in NCI. If only one target is found, it will be auto-activated. If more than one target is found, then DISCOVER_NTF will be generated for each target, and the host should select one by calling DISCOVER_SELECT_CMD. Then, the target will be activated. If the activation fails, GENERIC_ERROR_NTF is generated. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
The NFC core layer should not set the target_idx. Instead, the driver layer (e.g. NCI, PN533) should set the target_idx, so that it will be able to identify the target when its I/F (e.g. activate_target) is called. This is required in order to support multiple targets. Note that currently supported drivers (PN533 and NCI) don't use the target_idx in their implementation. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Make a clear separation between NCI states and flags. This is required in order to support more NCI states (e.g. for multiple targets support). Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Antonio Quartulli authored
In case of a node re-joining the cell the sta_info structure belonging to it is first destroyed and then reinserted. In this way its internal state is reset. The joining operation is recognised thank the Auth frame being received. This operation is helpful in case of a node being rebooted that is joining the ad-hoc cell again, before its purge timeout on other nodes expires. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Antonio Quartulli authored
In IBSS mode, whenever a new station is added a 2-way authentication challenge is performed. Actually this event can be used to recognise a new station joining the cell even if its sta_info entry is already in the list. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Free sk_buff if nfcwilink_send fails. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Download TI NFC init script during nfcwilink open operation, after the NFC channel is registered with TI shared transport. TI NFC init script is written in BTS format. First, read the chip version via a special vendor specific command. Second, we request the relevant BTS file from the user space, and then send the BTS commands to the chip. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Add endian annotations to TI nfcwilink driver. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Add NCI data exchange timer to catch timeouts, and call the data exchange callback with an error. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
It seems exceedingly unlikely that we'll ever support swapping rate control algorithms at runtime, so remove the unused refcounting code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Yogesh's patch to destroy aggregation sessions when stations are destroyed was needed, but unnecessarily complex. Clean up this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Export new attributes sensb_res for tech B and sensf_res for tech F in the target info (returned as a response to NFC_CMD_GET_TARGET). The max size of the attributes nfcid1, sensb_res and sensf_res is exported to user space though include/linux/nfc. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
Convert a couple of pr_debug/print_hex_dump to the standard utility. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
Use pr_debug to allow dynamic debugging to work. Move an #endif to allow brcmf_dbg_hex_dump to be outside the #if/#endif block. Move a const char* declaration to be inside a pr_debug so the function doesn't need a #if/#endif block. Don't use temporaries in debugging functions so the code can be optimized away. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Perches authored
This doesn't do anything anymore. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-