We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether
num_writers > 1 or should_grow at the top of the loop.  Then, much much
later, we wait for that timeout if either num_writers or should_grow is
true.  However, it's possible for a racing process (calling
btrfs_end_transaction()) to decrement num_writers such that we wait
forever instead of for 1.

Fix this by deciding how long to wait when we wait.  Include a smp_mb()
before checking if the waitqueue is active to ensure the num_writers
is visible.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

I'm no lockdep expert, but this appears to make the lockdep warning go
away for the i_mutex locking in the clone ioctl.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We had an edge case issue where the requested range was just
following an existing extent. Instead of skipping to the next
extent, we used the previous one which lead to having zero
sized extents.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The lookup_first_ordered_extent() was done on the wrong inode, and the
->delalloc_bytes test was wrong, as the following
btrfs_wait_ordered_range() would only invoke a range write and wouldn't
write the entire file data range. Also, a bad parameter was passed to
btrfs_wait_ordered_range().
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The alloc_target variable is not really used.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

These are all the cases where a variable is set, but not read which are
not bugs as far as I can see, but simply leftovers.

Still needs more review.

Found by gcc 4.6's new warnings
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

These are all the cases where a variable is set, but not
read which are really bugs.

- Couple of incorrect error handling fixed.
- One incorrect use of a allocation policy
- Some other things

Still needs more review.

Found by gcc 4.6's new warnings.

[akpm@linux-foundation.org: fix build.  Might have been bitrot]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)).  The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T x;
identifier f;
@@

T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
 ...+> }

@@
expression x;
@@

- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When btrfs is mounted in degraded mode, it has some internal structures
to track the missing devices.  This missing device is setup as readonly,
but the mapping code can get upset when we try to write to it.

This changes the mapping code to return -EIO instead of oops when we try
to write to the readonly device.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This patch reduces the CPU time spent in the extent buffer search by using the
radix tree instead of the rbtree and using the rcu lock instead of the spin
lock.

I did a quick test by the benchmark tool[1] and found the patch improve the
file creation/deletion performance problem that I have reported[2].

Before applying this patch:
Create files:
	Total files: 50000
	Total time: 0.971531
	Average time: 0.000019
Delete files:
	Total files: 50000
	Total time: 1.366761
	Average time: 0.000027

After applying this patch:
Create files:
	Total files: 50000
	Total time: 0.927455
	Average time: 0.000019
Delete files:
	Total files: 50000
	Total time: 1.292280
	Average time: 0.000026

[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
[2] http://marc.info/?l=linux-btrfs&m=128212635122920&w=2Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

restructure try_release_extent_buffer() and write a function to release the
extent buffer. It will be used later.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We have a fairly complex set of loops around walking our list of
delalloc inodes when we find metadata delalloc space running low.
It doesn't work very well, can use large amounts of CPU and doesn't
do very efficient writeback.

This switches us to kick the bdi flusher threads instead.  All dirty
data in btrfs is accounted as delalloc data, so this is very similar
in terms of what it writes, but we're able to just kick off the IO
and wait for progress.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

An earlier commit tried to keep us from allocating too many
empty metadata chunks.  It was somewhat too restrictive and could
lead to ENOSPC errors on empty filesystems.

This increases the limits to about 5% of the FS size, allowing more
metadata chunks to be preallocated.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When btrfs is running low on metadata space, it needs to force delayed
allocation pages to disk.  It currently does this with a suboptimal walk
of a private list of inodes with delayed allocation, and it would be
much better if we used the generic flusher threads.

writeback_inodes_sb_if_idle would be ideal, but it waits for the flusher
thread to start IO on all the dirty pages in the FS before it returns.
This adds variants of writeback_inodes_sb* that allow the caller to
control how many pages get sent down.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When btrfs discovers the generation number in a btree block is
incorrect, it can loop forever without forcing the RAID
code to try a valid mirror, and without returning EIO.

This changes things to properly kick out the EIO.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Conflicts:
	fs/btrfs/extent-tree.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>

If you mount -o space_cache, the option will be persistent across mounts, but to
make sure the user knows that they did this, emit a message telling them if they
didn't mount with -o space_cache but the feature is still used.
Signed-off-by: Josef Bacik <josef@redhat.com>

If something goes wrong with the free space cache we need a way to make sure
it's not loaded on mount and that it's cleared for everybody.  When you pass the
clear_cache option it will make it so all block groups are setup to be cleared,
which keeps them from being loaded and then they will be truncated when the
transaction is committed.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

There are just a few things that need to be fixed in the kernel to support mixed
data+metadata block groups.  Mostly we just need to make sure that if we are
using mixed block groups that we continue to allocate mixed block groups as we
need them.  Also we need to make sure __find_space_info will find our space info
if we search for DATA or METADATA only.  Tested this with xfstests and it works
nicely.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

With the free space disk caching we can mark the block group as started with the
caching, but we don't have a caching ctl.  This can race with anybody else who
tries to get the caching ctl before we cache (this is very hard to do btw).  So
instead check to see if cache->caching_ctl is set, and if not return NULL.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

This patch actually loads the free space cache if it exists.  The only thing
that really changes here is that we need to cache the block group if we're going
to remove an extent from it.  Previously we did not do this since the caching
kthread would pick it up.  With the on disk cache we don't have this luxury so
we need to make sure we read the on disk cache in first, and then remove the
extent, that way when the extent is unpinned the free space is added to the
block group.  This has been tested with all sorts of things.
Signed-off-by: Josef Bacik <josef@redhat.com>

This is a simple bit, just dump the free space cache out to our preallocated
inode when we're writing out dirty block groups.  There are a bunch of changes
in inode.c in order to account for special cases.  Mostly when we're doing the
writeout we're holding trans_mutex, so we need to use the nolock transacation
functions.  Also we can't do asynchronous completions since the async thread
could be blocked on already completed IO waiting for the transaction lock.  This
has been tested with xfstests and btrfs filesystem balance, as well as my ENOSPC
tests.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

In order to save free space cache, we need an inode to hold the data, and we
need a special item to point at the right inode for the right block group.  So
first, create a special item that will point to the right inode, and the number
of extent entries we will have and the number of bitmaps we will have.  We
truncate and pre-allocate space everytime to make sure it's uptodate.

This feature will be turned on as soon as you mount with -o space_cache, however
it is safe to boot into old kernels, they will just generate the cache the old
fashion way.  When you boot back into a newer kernel we will notice that we
modified and not the cache and automatically discard the cache.
Signed-off-by: Josef Bacik <josef@redhat.com>

Because btrfs_dirty_inode does a btrfs_join_transaction, it doesn't actually
reserve space.  It does this so we can try and dirty the inode quickly without
having to deal with the ENOSPC problems.  But if it does get back ENOSPC it
handles it properly.  The problem is use_block_rsv does a WARN_ON whenever this
case happens, even tho btrfs_dirty_inode takes it into account and actually
expects to get -ENOSPC if things are particularly tight.  So instead just remove
the warning.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

btrfs_commit_transaction will free our trans, but because we pass trans to
shrink_delalloc we could possibly have a use after free situation.  So instead
if we commit the transaction, set trans to null and set committed to true so we
don't keep trying to commit a transaction.  This fixes a panic I could reproduce
at will.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

If we failed to find the root subvol id, or the subvol=<name>, we would
deactivate the locked super and close the devices.  The problem is at this point
we have gotten the SB all setup, which includes setting super_operations, so
when we'd deactiveate the super, we'd do a close_ctree() which closes the
devices, so we'd end up closing the devices twice.  So if you do something like
this

mount /dev/sda1 /mnt/test1
mount /dev/sda1 /mnt/test2 -o subvol=xxx
umount /mnt/test1

it would blow up (if subvol xxx doesn't exist).  This patch fixes that problem.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

With multi-threaded writes we were getting ENOSPC early because somebody would
come in, start flushing delalloc because they couldn't make their reservation,
and in the meantime other threads would come in and use the space that was
getting freed up, so when the original thread went to check to see if they had
space they didn't and they'd return ENOSPC.  So instead if we have some free
space but not enough for our reservation, take the reservation and then start
doing the flushing.  The only time we don't take reservations is when we've
already overcommitted our space, that way we don't have people who come late to
the party way overcommitting ourselves.  This also moves all of the retrying and
flushing code into reserve_metdata_bytes so it's all uniform.  This keeps my
fs_mark test from returning -ENOSPC as soon as it starts and actually lets me
fill up the disk.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

Because the ENOSPC code over reserves super aggressively we end up allocating
chunks way more often than we should.  For example with my fs_mark tests on a
2gb fs I can end up reserved 1gb just for metadata, when only 34mb of that is
being used.  So instead check to see if the amount of space actually used is
less than 30% of the total space, and if so don't allocate a chunk, but only if
we have at least 256mb of free space to make sure we don't put too much pressure
on free space.
Signed-off-by: Josef Bacik <josef@redhat.com>

Currently we try and flush delalloc, but we only do that in a sort of weak way,
which works fine in most cases but if we're under heavy pressure we need to be
able to wait for flushing to happen.  Also instead of checking the bytes
reserved in the block_rsv, check the space info since it is more accurate.  The
sync option will be used in a future patch.
Signed-off-by: Josef Bacik <josef@redhat.com>

The global reservation stuff tries to add together DATA and METADATA used in
order to figure out how much to reserve for everything, but this doesn't work
right for mixed block groups.  Instead if we have mixed block groups just set
data used to 0.  Also with mixed block groups we will use bytes_may_use for
keeping track of delalloc bytes, so we need to take that into account in our
reservation calculations.
Signed-off-by: Josef Bacik <josef@redhat.com>

The new ENOSPC stuff breaks out the raid types which breaks the way we were
reporting df to the system.  This fixes it back so that Available is the total
space available to data and used is the actual bytes used by the filesystem.
This means that Available is Total - data used - all of the metadata space.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

The new ENOSPC stuff broke the df ioctl since we no longer create seperate space
info's for each RAID type.  So instead, loop through each space info's raid
lists so we can get the right RAID information which will allow the df ioctl to
tell us RAID types again.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

In very severe ENOSPC cases we can run out of inodes to do delalloc on, which
means we'll just keep looping trying to shrink delalloc.  Instead, if we fail to
shrink delalloc 3 times in a row break out since we're not likely to make any
progress.  Tested this with a 100mb fs an xfstests test 13.  Before the patch it
would hang the box, with the patch we get -ENOSPC like we should.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
  MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls.
  MAINTAINERS: Change list for ioc_serial to linux-serial.
  SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure
  MIPS: jz4740: Fix Kbuild Platform file.
  MIPS: Repair Kbuild make clean breakage.

If the host is slow in reading data or doesn't read data at all,
blocking write calls not only blocked the program that called write()
but the entire guest itself.

To overcome this, let's not block till the host signals it has given
back the virtio ring element we passed it.  Instead, send the buffer to
the host and return to userspace.  This operation then becomes similar
to how non-blocking writes work, so let's use the existing code for this
path as well.

This code change also ensures blocking write calls do get blocked if
there's not enough room in the virtio ring as well as they don't return
-EAGAIN to userspace.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] bsg: fix incorrect device_status value
  [SCSI] Fix VPD inquiry page wrapper

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Fix fs/gs reload oops with invalid ldt

[Ralf: Michel's original patch only fixed N32; I replicated the same fix
for O32.]
Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com>
Cc: paul.gortmaker@windriver.com
Cc: bruce.ashfield@windriver.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>