It has been discussed on lkml several times but we need
it documented as this is new stuff.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Today we have the following annotations for functions/data
referencing __init/__exit functions / data:

__init_refok     => for init functions
__initdata_refok => for init data
__exit_refok     => for exit functions

There is really no difference between the __init and __exit
versions and simplify it and to introduce a shorter annotation
the following new annotations are introduced:

__ref      => for functions (code) that
              references __*init / __*exit
__refdata  => for variables
__refconst => for const variables

Whit this annotation is it more obvious what the annotation
is for and there is no longer the arbitary division
between __init and __exit code.

The mechanishm is the same as before - a special section
is created which is made part of the usual sections
in the linker script.

We will start to see annotations like this:

-static struct pci_serial_quirk pci_serial_quirks[] = {
+static const struct pci_serial_quirk pci_serial_quirks[] __refconst = {
-----------------
-static struct notifier_block __cpuinitdata cpuid_class_cpu_notifier =
+static struct notifier_block cpuid_class_cpu_notifier __refdata =
----------------
-static int threshold_cpu_callback(struct notifier_block *nfb,
+static int __ref threshold_cpu_callback(struct notifier_block *nfb,

[The above is just random samples].

Note: No modifications were needed in modpost
to support the new sections due to the newly introduced
blacklisting.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

If there is a mixture of specifying sections for code in gcc
and assembler then if the assembler code do not add
the "ax" flags the linker will see this as two different sections
and generate unique sections for each. ld does so by adding a dot
and a number.
Teach modpost to warn if a section shows up that match this
pattern - but do this only for non-debug sections.

It will result in warnings like this:

WARNING: vmlinux.o (.sched.text.1): unexpected section name.
The (.[number]+) following section name are ld generated and not expected.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.

All warnings seen with a defconfig build for:
x86 (32+64bit) and sparc64 has been fixed (via respective maintainers).

arm, powerpc (64 bit), s390 (32 bit), ia64, alpha, sh4 checked - no
warnings seen with a defconfig build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

If the config option CONFIG_SECTION_MISMATCH is not set and
we see a Section mismatch present the following to the user:

modpost: Found 1 section mismatch(es).
To see additional details select "Enable full Section mismatch analysis"
in the Kernel Hacking menu (CONFIG_SECTION_MISMATCH).

If the option CONFIG_SECTION_MISMATCH is selected
then be verbose in the Section mismatch reporting from mdopost.
Sample outputs:

WARNING: o-x86_64/vmlinux.o(.text+0x7396): Section mismatch in reference from the function discover_ebda() to the variable .init.data:ebda_addr
The function  discover_ebda() references
the variable __initdata ebda_addr.
This is often because discover_ebda lacks a __initdata
annotation or the annotation of ebda_addr is wrong.

WARNING: o-x86_64/vmlinux.o(.data+0x74d58): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: o-x86_64/vmlinux.o(__ksymtab+0x630): Section mismatch in reference from the variable __ksymtab_arch_register_cpu to the function .cpuinit.text:arch_register_cpu()
The symbol arch_register_cpu is exported and annotated __cpuinit
Fix this by removing the __cpuinit annotation of arch_register_cpu or drop the export.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Change kconfig behavior so that mixing bool and tristate config
settings in a choice is possible and has the desired effect of offering
just the tristate options individually if the choice gets set to M, and
a normal boolean selection if the choice gets set to Y.

Also fix scripts/kconfig/conf's handling of children of choice values -
there may be more than one immediate child, and all of them need to be
processed.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Roman Zippel" <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Simplify the dependencies on __mem{init,exit}* (ACPI_HOTPLUG_MEMORY requires
MEMORY_HOTPLUG).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Remove the deprecated __attribute_used__.

[Introduce __section in a few places to silence checkpatch /sam]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Signed-off-by: Daniel De Graaf <danieldegraaf@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Kconfig had a synonym "enable" for "select" that was neither documented
nor used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Refactor code so the warning report function
does nothing else than reporting warnings.
As a side effect some other code paths were cleaned
up by this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Introducing helpers to retreive symbol and section
names cleaned up the code a bit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

The typical layout is now:
WARNING: vmlinux.o(.text+0x372ec): Section mismatch: reference to .devinit.text:pci_scan_one_pbm in 'psycho_scan_bus'

This is first step towards more readable warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

link vmlinux.o so we may report section mismatch bugs before
we start with the real link - that may error out.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Setting the option DEBUG_SECTION_MISMATCH will
report additional section mismatch'es but this
should in the end makes it possible to get rid of
all of them.

See help text in lib/Kconfig.debug for details.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Introducing separate sections for __dev* (HOTPLUG),
__cpu* (HOTPLUG_CPU) and __mem* (MEMORY_HOTPLUG)
allows us to do a much more reliable Section mismatch
check in modpost. We are no longer dependent on the actual
configuration of for example HOTPLUG.

This has the effect that all users see much more
Section mismatch warnings than before because they
were almost all hidden when HOTPLUG was enabled.
The advantage of this is that when building a piece
of code then it is much more likely that the Section
mismatch errors are spotted and the warnings will be
felt less random of nature.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>

Add a new helper: __section() that makes a section definition
much shorter and more readable.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

This patch consolidate all definitions of .init.text, .init.data
and .exit.text, .exit.data section definitions in
the generic vmlinux.lds.h.

This is a preparational patch - alone it does not buy
us much good.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Now that match() is introduced use it consistently so
we can share the section name definitions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Change the logic in modpost so we identify all the
bad combinations of sections that refer to other
sections.
Compared to the previous approach we are much less
dependent on knowledge of what additional sections
the tool chain uses and thus we can keep the false
positives low.

The implmentation is changed to use a table based
lookup and we now check all combinations in first
pass so we no longer need separate passes for init
and exit sections.

Tested that the same warnings are generated for
an allyesconfig build without CONFIG_HOTPLUG.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>

Split a too long function up in smaller bits to make
prgram logic easier to follow.
A few related changes done due to parameter
changes.

No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

The relocation record sometimes contained an address
which was not an exactly match for a symbol.

Implment some simple logic such that if there
is a symbol within 20 bytes of the address contained
in the relocation record then print the name of this
symbol.

With this change modpost could find symbol names
for the remaining .init.text symbols in my
allyesconfig build for x86_64.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

It is very convinient to say:
scripts/mod/modpost mm/built-in.o

to check if any section mismatch errors occured
in mm/ (as an example).
Fix it so this is possible again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Remove the tmp file when exiting.  Noticed by Arjan van de Ven.
Catch mktemp failure and exit with message.
Trap kill or other signals and exit cleanly.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Gettext support for symbol names are unnecessary.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

Gettext support for conf.c

[Include locale.h by Kyle].
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>

Gettext support for lxdialog.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

Full gettext support for menuconfig.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

Full gettext support for xconfig.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

This patch removes the indirect I18N support for config file.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

Gettext support for menu and toolbar.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

This patch adds missing gettext macros.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

This patch removes the unnecessary whitespaces from
end of help lines of Kconfig files.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

This patch adds tracking messages.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>

The output of 'make help' covers a lot of options, but doesn't include
a listing for 'make prepare'.  Here's a one-liner to fix that...
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Rather than fixing the output directory in the generated Makefile,
determine it from the placement of Makefile. This allows moving
the build tree around or accessing it through different mount paths.

(The lastword definition is a compatibility one for make prior to 3.81;
newer make will simply ignore it and use the [faster] built-in.)
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

akpm complained about overly long lines in modpost.c and
when started additional style issues were fixed:

o Updated my copyright
o Removed unneeded {}
o Drop assignments in if ()
o Spaces around operators
o Break long lines
o locate * near variable not type
o Fix a format specifier for sizeof()
o Corrected placement of '{' and '}'
o spaces to tabs (but use tabs only for indention)

modpost.c is not checkpatch clean. Readability were favoured
on top of checkpatch compliance.
But checkpatch were used to find additional stuff to clean up.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".

* Use C89 conformant functions rand() and srand()
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>