Please note that you need the patch below in addition, otherwise the
syscall wrapper stuff won't work on those 32 bit architectures which enable
the wrappers.

When enabled the syscall wrapper defines always take long parameters and then
cast them to whatever is needed. This approach doesn't work for the 32 bit
case where the original syscall takes a long long parameter, since we would
lose the upper 32 bits.
So syscalls with 64 bit arguments are special cases wrt to syscall wrappers
and enp up in the ugliness below (see also sys_fallocate). In addition these
special cased syscall wrappers have the drawback that ftrace syscall tracing
doesn't work on them, since they don't get defined by using the usual macros.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify references anon_inode_getfd(), which is only available with
ANON_INODES enabled. Presently this bails out with the following:

  LD      vmlinux
fs/built-in.o: In function `sys_fanotify_init':
(.text+0x26d1c): undefined reference to `anon_inode_getfd'
make: *** [vmlinux] Error 1

which is trivially corrected by adding an ANON_INODES select.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Eric Paris <eparis@redhat.com>

Send events to userspace by reading the file descriptor from fanotify_init().
One will get blocks of data which look like:

struct fanotify_event_metadata {
	__u32 event_len;
	__u32 vers;
	__s32 fd;
	__u64 mask;
	__s64 pid;
	__u64 cookie;
} __attribute__ ((packed));

Simple code to retrieve and deal with events is below

	while ((len = read(fan_fd, buf, sizeof(buf))) > 0) {
		struct fanotify_event_metadata *metadata;

		metadata = (void *)buf;
		while(FAN_EVENT_OK(metadata, len)) {
			[PROCESS HERE!!]
			if (metadata->fd >= 0 && close(metadata->fd) != 0)
				goto fail;
			metadata = FAN_EVENT_NEXT(metadata, len);
		}
	}
Signed-off-by: Eric Paris <eparis@redhat.com>

NAME
	fanotify_mark - add, remove, or modify an fanotify mark on a
filesystem object

SYNOPSIS
	int fanotify_mark(int fanotify_fd, unsigned int flags, u64 mask,
			  int dfd, const char *pathname)

DESCRIPTION
	fanotify_mark() is used to add remove or modify a mark on a filesystem
	object.  Marks are used to indicate that the fanotify group is
	interested in events which occur on that object.  At this point in
	time marks may only be added to files and directories.

	fanotify_fd must be a file descriptor returned by fanotify_init()

	The flags field must contain exactly one of the following:

	FAN_MARK_ADD - or the bits in mask and ignored mask into the mark
	FAN_MARK_REMOVE - bitwise remove the bits in mask and ignored mark
		from the mark

	The following values can be OR'd into the flags field:

	FAN_MARK_DONT_FOLLOW - same meaning as O_NOFOLLOW as described in open(2)
	FAN_MARK_ONLYDIR - same meaning as O_DIRECTORY as described in open(2)

	dfd may be any of the following:
	AT_FDCWD: the object will be lookup up based on pathname similar
		to open(2)

	file descriptor of a directory: if pathname is not NULL the
		object to modify will be lookup up similar to openat(2)

	file descriptor of the final object: if pathname is NULL the
		object to modify will be the object referenced by dfd

	The mask is the bitwise OR of the set of events of interest such as:
	FAN_ACCESS		- object was accessed (read)
	FAN_MODIFY		- object was modified (write)
	FAN_CLOSE_WRITE		- object was writable and was closed
	FAN_CLOSE_NOWRITE	- object was read only and was closed
	FAN_OPEN		- object was opened
	FAN_EVENT_ON_CHILD	- interested in objected that happen to
				  children.  Only relavent when the object
				  is a directory
	FAN_Q_OVERFLOW		- event queue overflowed (not implemented)

RETURN VALUE
	On success, this system call returns 0. On error, -1 is
	returned, and errno is set to indicate the error.

ERRORS
	EINVAL An invalid value was specified in flags.

	EINVAL An invalid value was specified in mask.

	EINVAL An invalid value was specified in ignored_mask.

	EINVAL fanotify_fd is not a file descriptor as returned by
	fanotify_init()

	EBADF fanotify_fd is not a valid file descriptor

	EBADF dfd is not a valid file descriptor and path is NULL.

	ENOTDIR dfd is not a directory and path is not NULL

	EACCESS no search permissions on some part of the path

	ENENT file not found

	ENOMEM Insufficient kernel memory is available.

CONFORMING TO
	These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch simply declares the new sys_fanotify_mark syscall

int fanotify_mark(int fanotify_fd, unsigned int flags, u64_mask,
		  int dfd const char *pathname)
Signed-off-by: Eric Paris <eparis@redhat.com>

NAME
	fanotify_init - initialize an fanotify group

SYNOPSIS
	int fanotify_init(unsigned int flags, unsigned int event_f_flags, int priority);

DESCRIPTION
	fanotify_init() initializes a new fanotify instance and returns a file
	descriptor associated with the new fanotify event queue.

	The following values can be OR'd into the flags field:

	FAN_NONBLOCK Set the O_NONBLOCK file status flag on the new open file description.
		Using this flag saves extra calls to fcntl(2) to achieve the same
		result.

	FAN_CLOEXEC Set the close-on-exec (FD_CLOEXEC) flag on the new file descriptor.
		See the description of the O_CLOEXEC flag in open(2) for reasons why
		this may be useful.

	The event_f_flags argument is unused and must be set to 0

	The priority argument is unused and must be set to 0

RETURN VALUE
	On success, this system call return a new file descriptor. On error, -1 is
	returned, and errno is set to indicate the error.

ERRORS
	EINVAL An invalid value was specified in flags.

	EINVAL A non-zero valid was passed in event_f_flags or in priority

	ENFILE The system limit on the total number of file descriptors has been reached.

	ENOMEM Insufficient kernel memory is available.

CONFORMING TO
	These system calls are Linux-specific.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch defines a new syscall fanotify_init() of the form:

int sys_fanotify_init(unsigned int flags, unsigned int event_f_flags,
		      unsigned int priority)

This syscall is used to create and fanotify group.  This is very similar to
the inotify_init() syscall.
Signed-off-by: Eric Paris <eparis@redhat.com>

Currently if 2 events are going to be merged on the notication queue with
different masks the second event will be cloned and will replace the first
event.  However if this notification queue is the only place referencing
the event in question there is no reason not to just update the event in
place.  We can tell this if the event->refcnt == 1.  Since we hold a
reference for each queue this event is on we know that when refcnt == 1
this is the only queue.  The other concern is that it might be about to be
added to a new queue, but this can't be the case since fsnotify holds a
reference on the event until it is finished adding it to queues.
Signed-off-by: Eric Paris <eparis@redhat.com>

Instead of just merging fanotify events if they are exactly the same, merge
notification events with different masks.  To do this we have to clone the
old event, update the mask in the new event with the new merged mask, and
put the new event in place of the old event.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify listeners get an open file descriptor to the object in question so
the ordering of operations is not as important as in other notification
systems.  inotify will drop events if the last event in the event FIFO is
the same as the current event.  This patch will drop fanotify events if
they are the same as another event anywhere in the event FIFO.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify is a novel file notification system which bases notification on
giving userspace both an event type (open, close, read, write) and an open
file descriptor to the object in question.  This should address a number of
races and problems with other notification systems like inotify and dnotify
and should allow the future implementation of blocking or access controlled
notification.  These are useful for on access scanners or hierachical storage
management schemes.

This patch just implements the basics of the fsnotify functions.
Signed-off-by: Eric Paris <eparis@redhat.com>

sparc used the same value as FMODE_NONOTIFY so change FMODE_NONOTIFY to be
something unique.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

This is a new f_mode which can only be set by the kernel.  It indicates
that the fd was opened by fanotify and should not cause future fanotify
events.  This is needed to prevent fanotify livelock.  An example of
obvious livelock is from fanotify close events.

Process A closes file1
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
This creates a close event for file1.
fanotify opens file1 for Listener X
Listener X deals with the event and closes its fd for file1.
notice a pattern?

The fix is to add the FMODE_NONOTIFY bit to the open filp done by the kernel
for fanotify.  Thus when that file is used it will not generate future
events.

This patch simply defines the bit.
Signed-off-by: Eric Paris <eparis@redhat.com>

All callers to fsnotify_find_mark_entry() except one take and
release inode->i_lock around the call.  Take the lock inside
fsnotify_find_mark_entry() instead.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>

nomenclature change.  Used to call things 'entries' but now we just call
them 'marks.'  Do those changes for dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>

rename anything in inotify that deals with mark_entry to just be mark.  It
makes a lot more sense.
Signed-off-by: Eric Paris <eparis@redhat.com>

previously I used mark_entry when talking about marks on inodes.  The
_entry is pretty useless.  Just use "mark" instead.
Signed-off-by: Eric Paris <eparis@redhat.com>

the _entry portion of fsnotify functions is useless.  Drop it.
Signed-off-by: Eric Paris <eparis@redhat.com>

The name is long and it serves no real purpose.  So rename
fsnotify_mark_entry to just fsnotify_mark.
Signed-off-by: Eric Paris <eparis@redhat.com>

Some fsnotify operations send a struct file.  This is more information than
we technically need.  We instead send a struct path in all cases instead of
sometimes a path and sometimes a file.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>

To differentiate between inode and vfsmount (or other future) types of
marks we add a flags field and set the inode bit on inode marks (the only
currently supported type of mark)
Signed-off-by: Eric Paris <eparis@redhat.com>

vfsmount marks need mostly the same data as inode specific fields, but for
consistency and understandability we put that data in a vfsmount specific
struct inside a union with inode specific data.
Signed-off-by: Eric Paris <eparis@redhat.com>

The addition of marks on vfs mounts will be simplified if the inode
specific parts of a mark and the vfsmnt specific parts of a mark are
actually in a union so naming can be easy.  This patch just implements the
inode struct and the union.
Signed-off-by: Eric Paris <eparis@redhat.com>

To ensure that a group will not duplicate events when it receives it based
on the vfsmount and the inode should_send_event test we should distinguish
those two cases.  We pass a vfsmount to this function so groups can make
their own determinations.
Signed-off-by: Eric Paris <eparis@redhat.com>

currently all of the notification systems implemented select which inodes
they care about and receive messages only about those inodes (or the
children of those inodes.)  This patch begins to flesh out fsnotify support
for the concept of listeners that want to hear notification for an inode
accessed below a given monut point.  This patch implements a second list
of fsnotify groups to hold these types of groups and a second global mask
to hold the events of interest for this type of group.

The reason we want a second group list and mask is because the inode based
notification should_send_event support which makes each group look for a mark
on the given inode.  With one nfsmount listener that means that every group would
have to take the inode->i_lock, look for their mark, not find one, and return
for every operation.   By seperating vfsmount from inode listeners only when
there is a inode listener will the inode groups have to look for their
mark and take the inode lock.  vfsmount listeners will have to grab the lock and
look for a mark but there should be fewer of them, and one vfsmount listener
won't cause the i_lock to be grabbed and released for every fsnotify group
on every io operation.
Signed-off-by: Eric Paris <eparis@redhat.com>

Currently all fsnotify groups are added immediately to the
fsnotify_inode_groups list upon creation.  This means, even groups with no
watches (common for audit) will be on the global tracking list and will
get checked for every event.  This patch adds groups to the global list on
when the first inode mark is added to the group.
Signed-of-by: Eric Paris <eparis@redhat.com>

Currently the comments say that group->num_marks is held because the group
is on the fsnotify_group list.  This isn't strictly the case, we really
just hold the num_marks for the life of the group (any time group->refcnt
is != 0)  This patch moves the initialization stuff and makes it clear when
it is really being held.
Signed-off-by: Eric Paris <eparis@redhat.com>

Simple renaming patch.  fsnotify is about to support mount point listeners
so I am renaming fsnotify_groups and fsnotify_mask to indicate these are lists
used only for groups which have watches on inodes.
Signed-off-by: Eric Paris <eparis@redhat.com>

Nothing uses the mask argument to fsnotify_alloc_group.  This patch drops
that argument.
Signed-off-by: Eric Paris <eparis@redhat.com>

Currently the audit watch group always sets a mask equal to all events it
might care about.  We instead should only set the group mask if we are
actually watching inodes.  This should be a perf win when audit watches are
compiled in.
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify_obtain_group was intended to be able to find an already existing
group.  Nothing uses that functionality.  This just renames it to
fsnotify_alloc_group so it is clear what it is doing.
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify_obtain_group uses kzalloc but then proceedes to set things to 0.
This patch just deletes those useless lines.
Signed-off-by: Eric Paris <eparis@redhat.com>

The original fsnotify interface has a group-num which was intended to be
able to find a group after it was added.  I no longer think this is a
necessary thing to do and so we remove the group_num.
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify_replace_event need to lock both the old and the new event.  This
causes lockdep to get all pissed off since it dosn't know this is safe.
It's safe in this case since the new event is impossible to be reached from
other places in the kernel.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify would like to clone events already on its notification list, make
changes to the new event, and then replace the old event on the list with
the new event.  This patch implements the replace functionality of that
process.
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify_clone_event will take an event, clone it, and return the cloned
event to the caller.  Since events may be in use by multiple fsnotify
groups simultaneously certain event entries (such as the mask) cannot be
changed after the event was created.  Since fanotify would like to merge
events happening on the same file it needs a new clean event to work with
so it can change any fields it wishes.
Signed-off-by: Eric Paris <eparis@redhat.com>

inotify only wishes to merge a new event with the last event on the
notification fifo.  fanotify is willing to merge any events including by
means of bitwise OR masks of multiple events together.  This patch moves
the inotify event merging logic out of the generic fsnotify notification.c
and into the inotify code.  This allows each use of fsnotify to provide
their own merge functionality.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify needs a path in order to open an fd to the object which changed.
Currently notifications to inode's parents are done using only the inode.
For some parental notification we have the entire file, send that so
fanotify can use it.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify, the upcoming notification system actually needs a struct path so it can
do opens in the context of listeners, and it needs a file so it can get f_flags
from the original process.  Close was the only operation that already was passing
a struct file to the notification hook.  This patch passes a file for access,
modify, and open as well as they are easily available to these hooks.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify is going to need to look at file->private_data to know if an event
should be sent or not.  This passes the data (which might be a file,
dentry, inode, or none) to the should_send function calls so fanotify can
get that information when available
Signed-off-by: Eric Paris <eparis@redhat.com>