- 23 May, 2016 14 commits
-
-
Ville Syrjälä authored
When we resume the watermark register may contain some BIOS leftovers, or just the hardware reset values. We should ignore those as the pipes will be off anyway, and so frobbing around with intermediate watermarks doesn't make much sense. In fact I think we should just throw the skip_intermediate_wm flag out, and instead properly sanitize the "active" watermarks to match the current plane and pipe states. The actual wm state readout might also need a bit of work. But for now, let's continue with the skip_intermediate_wm to keep the fix more minimal. Fixes this sort of errors on resume [drm:ilk_validate_pipe_wm] LP0 watermark invalid [drm:intel_crtc_atomic_check] No valid intermediate pipe watermarks are possible [drm:intel_display_resume [i915]] *ERROR* Restoring old state failed with -22 and a boatload of subsequent modeset BAT fails on my ILK. v2: - Rebase; the SKL atomic WM patches that just landed changed the WM structure fields in intel_crtc_state slightly. (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Daniel Vetter authored
The default of 0 is 500us of link training, but that's not enough for some platforms. Decoding this correctly means we're using 2.5ms of link training on these platforms, which fixes flickering issues associated with enabling PSR. v2: Unbotch the math a bit. v3: Drop debug hunk. v4: Improve commit message. Tested-by:
Lyude <cpaul@redhat.com> Cc: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Tested-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-2-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit 50db1390) Signed-off-by:
-
Ramalingam C authored
In BXT DSI there is no regs programmed with few horizontal timings in Pixels but txbyteclkhs.. So retrieval process adds some ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. Actually here for the given adjusted_mode, we are calculating the value programmed to the port and then back to the horizontal timing param in pixels. This is the expected value at the end of get_config, including roundup errors. And if that is same as retrieved value from port, then retrieved (HW state) adjusted_mode's horizontal timings are corrected to match with SW state to nullify the errors. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
Ville Syrjälä authored
When we read out the watermark state from the hardware we're supposed to transfer that into the active watermarks, but currently we fail to any part of the active watermarks that isn't explicitly written. Let's clear it all upfront. Looks like this has been like this since the beginning, when I added the readout. No idea why I didn't clear it up. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 243e6a44 ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()") Cc: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
SKL DPLLs shouldn't be called DPPLs. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 2edd6443 ("drm/i915: Use a table to initilize shared dplls") Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> (cherry picked from commit d5aab9d4) Signed-off-by:
-
Chris Wilson authored
With the introduction of a distinct engine->id vs the hardware id, we need to fix up the value we use for selecting the target engine when signaling a semaphore. Note that these values can be merged with engine->guc_id. Fixes: de1add36 Cc: stable@vger.kernel.org # v4.6 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Ander Conselvan de Oliveira authored
Set the lane count for HDMI to 4. This will make it easier to unduplicate CHV phy code. This also fixes the the soft reset programming for HDMI with CHV. After commit a8f327fb ("drm/i915: Clean up CHV lane soft reset programming"), it wouldn't set the right bits for PCS23 since it relied on a lane count that was never set. v2: Set lane_count in *_get_config() to please state checker. (0day) v3: Set lane_count for DDI in DVI mode too. (CI) v4: Add note about CHV soft lane reset. (Ander) Fixes: a8f327fb ("drm/i915: Clean up CHV lane soft reset programming") Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Jim Bride <jim.bride@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-2-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit d4d6279a) Signed-off-by:
-
Ramalingam C authored
Retriving the horizontal timings from the port registers as part of get_config(). This fixes a division by zero: [ 56.916557] divide error: 0000 [#1] PREEMPT SMP [ 56.921741] Modules linked in: i915(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart cf g80211 rfkill binfmt_misc ax88179_178a kvm_intel kvm irqbypass crc32c_intel efivars tpm_tis tpm fuse [ 56.944106] CPU: 3 PID: 1097 Comm: modprobe Not tainted 4.6.0-rc4+ #433 [ 56.951501] Hardware name: Intel Corp. Broxton M/RVP, BIOS BXT1RVPA.X64.0131.B30.1604142217 04/14/2016 [ 56.961908] task: ffff88007a854d00 ti: ffff88007aea0000 task.ti: ffff88007aea0000 [ 56.970273] RIP: 0010:[<ffffffffa01235b2>] [<ffffffffa01235b2>] drm_mode_hsync+0x22/0x40 [drm] [ 56.980043] RSP: 0018:ffff88007aea3788 EFLAGS: 00010206 [ 56.985982] RAX: 000000000788b600 RBX: ffff880073c22108 RCX: 0000000000000000 [ 56.993957] RDX: 0000000000000000 RSI: ffff88007ab06800 RDI: ffff880073c22108 [ 57.001935] RBP: ffff88007aea3788 R08: 0000000000000001 R09: ffff880073c221e8 [ 57.009903] R10: ffff880073c22108 R11: 0000000000000001 R12: ffff88007a300000 [ 57.017872] R13: ffff880073c22000 R14: ffff880175f78000 R15: ffff880175f78798 [ 57.025849] FS: 00007f105d3e6700(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 [ 57.034894] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.041317] CR2: 00007f4d485101d0 CR3: 000000007a820000 CR4: 00000000003406e0 [ 57.049292] Stack: [ 57.051539] ffff88007aea37a0 ffffffffa043b632 ffff880175f787c8 ffff88007aea3810 [ 57.059825] ffffffffa043d59e ffff880175f787b0 ffff88007ab68c00 ffff88007aea37f0 [ 57.068128] ffff880073c221e8 ffff880073c22108 ffff880175f78780 ffff880100000000 [ 57.076430] Call Trace: [ 57.079254] [<ffffffffa043b632>] intel_mode_from_pipe_config+0x82/0xb0 [i915] [ 57.087405] [<ffffffffa043d59e>] intel_modeset_setup_hw_state+0x55e/0xd60 [i915] [ 57.095847] [<ffffffffa043ff94>] intel_modeset_init+0x8e4/0x1630 [i915] [ 57.103415] [<ffffffffa047bcf0>] i915_driver_load+0xbe0/0x1980 [i915] [ 57.110745] [<ffffffffa0116c19>] drm_dev_register+0xa9/0xc0 [drm] [ 57.117681] [<ffffffffa011921d>] drm_get_pci_dev+0x8d/0x1e0 [drm] [ 57.124600] [<ffffffff8195f942>] ? _raw_spin_unlock_irqrestore+0x42/0x70 [ 57.132253] [<ffffffffa03b0384>] i915_pci_probe+0x34/0x50 [i915] [ 57.139070] [<ffffffff8149c375>] local_pci_probe+0x45/0xa0 [ 57.145303] [<ffffffff8149d300>] ? pci_match_device+0xe0/0x110 [ 57.151924] [<ffffffff8149d6cb>] pci_device_probe+0xdb/0x130 [ 57.158355] [<ffffffff81579b93>] driver_probe_device+0x223/0x440 [ 57.165169] [<ffffffff81579e85>] __driver_attach+0xd5/0x100 [ 57.171500] [<ffffffff81579db0>] ? driver_probe_device+0x440/0x440 [ 57.178510] [<ffffffff81577736>] bus_for_each_dev+0x66/0xa0 [ 57.184841] [<ffffffff815793de>] driver_attach+0x1e/0x20 [ 57.190881] [<ffffffff81578d6e>] bus_add_driver+0x1ee/0x280 [ 57.197212] [<ffffffff8157abc0>] driver_register+0x60/0xe0 [ 57.203447] [<ffffffff8149bc50>] __pci_register_driver+0x60/0x70 [ 57.210285] [<ffffffffa0119450>] drm_pci_init+0xe0/0x110 [drm] [ 57.216911] [<ffffffff810dcd8d>] ? trace_hardirqs_on+0xd/0x10 [ 57.223434] [<ffffffffa023a000>] ? 0xffffffffa023a000 [ 57.229237] [<ffffffffa023a092>] i915_init+0x92/0x99 [i915] [ 57.235570] [<ffffffff810003db>] do_one_initcall+0xab/0x1d0 [ 57.241900] [<ffffffff810f9eef>] ? rcu_read_lock_sched_held+0x7f/0x90 [ 57.249205] [<ffffffff81204f18>] ? kmem_cache_alloc_trace+0x248/0x2b0 [ 57.256509] [<ffffffff811a5eee>] ? do_init_module+0x27/0x1d9 [ 57.262934] [<ffffffff811a5f26>] do_init_module+0x5f/0x1d9 [ 57.269167] [<ffffffff8112392f>] load_module+0x20ef/0x27b0 [ 57.275401] [<ffffffff8111f8e0>] ? store_uevent+0x40/0x40 [ 57.281541] [<ffffffff81124243>] SYSC_finit_module+0xc3/0xf0 [ 57.287969] [<ffffffff8112428e>] SyS_finit_module+0xe/0x10 [ 57.294203] [<ffffffff81960069>] entry_SYSCALL_64_fastpath+0x1c/0xac [ 57.301406] Code: ff 5d c3 66 0f 1f 44 00 00 0f 1f 44 00 00 8b 87 d8 00 00 00 55 48 89 e5 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 5d c3 [ 57.322964] RIP [<ffffffffa01235b2>] drm_mode_hsync+0x22/0x40 [drm] [ 57.330103] RSP <ffff88007aea3788> [ 57.334276] ---[ end trace d414224cb2e2a4cf ]--- [ 57.339861] modprobe (1097) used greatest stack depth: 12048 bytes left Fixes: 6f0e7535 ("drm/i915/BXT: Get pipe conf from the port registers") Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Chris Wilson authored
Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Move the intel_enable_gtt() call to happen before we touch the GTT during resume. Right now it's done way too late. Before commit ebb7c78d ("agp/intel-gtt: Only register fake agp driver for gen1") it was actually done earlier on account of also getting called from the resume hook of the fake agp driver. With the fake agp driver no longer getting registered we must move the call up. The symptoms I've seen on my 830 machine include lowmem corruption, other kinds of memory corruption, and straight up hung machine during or just after resume. Not really sure what causes the memory corruption, but so far I've not seen any with this fix. I think we shouldn't really need to call this during init, but we have been doing that so I've decided to keep the call. However moving that call earlier could be prudent as well. Doing it right after the intel-gtt probe seems appropriate. Also tested this on 946gz,elk,ilk and all seemed quite happy with this change. v2: Reorder init_hw vs. enable_hw functions (Chris) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: ebb7c78d ("agp/intel-gtt: Only register fake agp driver for gen1") Signed-off-by:
-
Ville Syrjälä authored
DP dual mode type 1 DVI adaptors aren't required to implement any registers, so it's a bit hard to detect them. The best way would be to check the state of the CONFIG1 pin, but we have no way to do that. So as a last resort, check the VBT to see if the HDMI port is in fact a dual mode capable DP port. v2: Deal with VBT code reorganization Deal with DRM_DP_DUAL_MODE_UNKNOWN Reduce DEVICE_TYPE_DP_DUAL_MODE_BITS a bit Accept both DP and HDMI dvo_port in VBT as my BSW at least declare its DP port as HDMI :( v3: Ignore DEVICE_TYPE_NOT_HDMI_OUTPUT (Shashank) Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Reported-by:Tore Anderson <tore@fud.no> Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> (cherry picked from commit d6199256) Signed-off-by:
-
Ville Syrjälä authored
To save a bit of power, let's try to turn off the TMDS output buffers in DP++ adaptors when we're not driving the port. v2: Let's not forget DDI, toss in a debug message while at it v3: Just do the TMDS output control based on adaptor type. With the helper getting passed the type, we wouldn't actually have to check at all in the driver, but the check eliminates the debug output more honest Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: -
Ville Syrjälä authored
Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: -
Ville Syrjälä authored
Add a helper which aids in the identification of DP dual mode (aka. DP++) adaptors. There are several types of adaptors specified: type 1 DVI, type 1 HDMI, type 2 DVI, type 2 HDMI Type 1 adaptors have a max TMDS clock limit of 165MHz, type 2 adaptors may go as high as 300MHz and they provide a register informing the source device what the actual limit is. Supposedly also type 1 adaptors may optionally implement this register. This TMDS clock limit is the main reason why we need to identify these adaptors. Type 1 adaptors provide access to their internal registers and the sink DDC bus through I2C. Type 2 adaptors provide this access both via I2C and I2C-over-AUX. A type 2 source device may choose to implement either of these methods. If a source device implements the I2C-over-AUX method, then the driver will obviously need specific support for such adaptors since the port is driven like an HDMI port, but DDC communication happes over the AUX channel. This helper should be enough to identify the adaptor type (some type 1 DVI adaptors may be a slight exception) and the maximum TMDS clock limit. Another feature that may be available is control over the TMDS output buffers on the adaptor, possibly allowing for some power saving when the TMDS link is down. Other user controllable features that may be available in the adaptors are downstream i2c bus speed control when using i2c-over-aux, and some control over the CEC pin. I chose not to provide any helper functions for those since I have no use for them in i915 at this time. The rest of the registers in the adaptor are mostly just information, eg. IEEE OUI, hardware and firmware revision, etc. v2: Pass adaptor type to helper functions to ease driver implementation Fix a bunch of typoes (Paulo) Add DRM_DP_DUAL_MODE_UNKNOWN for the case where we don't (yet) know the type (Paulo) Reject 0x00 and 0xff DP_DUAL_MODE_MAX_TMDS_CLOCK values (Paulo) Adjust drm_dp_dual_mode_detect() type2 vs. type1 detection to ease future LSPCON enabling Remove the unused DP_DUAL_MODE_LAST_RESERVED define v3: Fix kernel doc function argument descriptions (Jani) s/NONE/UNKNOWN/ in drm_dp_dual_mode_detect() docs Add kernel doc for enum drm_dp_dual_mode_type Actually build the docs Fix more typoes v4: Adjust code indentation of type2 adaptor detection (Shashank) Add debug messages for failurs cases (Shashank) v5: EXPORT_SYMBOL(drm_dp_dual_mode_read) (Paulo) Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
- 25 Apr, 2016 1 commit
-
-
Daniel Vetter authored
Signed-off-by:
-
- 24 Apr, 2016 3 commits
-
-
Akash Goel authored
As a part of WaGsvDisableTurbo, Driver makes an early exit from the Gen9 Turbo enabling function, so doesn't program the Turbo Control register. But BIOS could leave the Hw Turbo as enabled, so need to explicitly clear out the Control register just to avoid inconsitency with debugfs interface, which will show Turbo as enabled only and that is not expected after adding the WaGsvDisableTurbo. Apart from this there is no problem even if the Turbo is left enabled in the Control register, as the Up/Down interrupts would remain masked. v2: Add explicit clearing of Turbo Control register to *_disable_rps() also for the similar consistency (Chris) Reviewed-by:Akash Goel <akash.goel@intel.com> Signed-off-by:
-
Akash Goel authored
There are certain registers, which captures the time elapsed in the in current Up/Down EI, for how long GT has been Idle/Busy/Avg in the current Up/Down EI and also in the previous Up/Down EI. These register values are reported by the i915_frequency_info debugfs interface. The Driver prints the 'us' suffix after the values, albeit they are actually in raw form & not in microsecond units. This patch removes the 'us' suffix so that its clear to User that values are indeed in raw form. v2: Present the values in microseconds unit also, after platform specific conversion (Chris) v3: Add a space between raw & microsecond value (Chris) Reviewed-by: -
Akash Goel authored
Added a new GT_PM_INTERVAL_TO_US macro to perform the platform specific conversion of PM time interval values to microseconds unit. Reviewed-by:
-
- 22 Apr, 2016 10 commits
-
-
Ville Syrjälä authored
Somehow my SNB GT1 (Dell XPS 8300) gets very unhappy around GPU hangs if the RPS EI/thresholds aren't suitably aligned. It seems like scheduling/timer interupts stop working somehow and things get stuck eg. in usleep_range(). I bisected the problem down to commit 8a586437 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") I observed that before all the values were at least multiples of 25, but afterwards they are not. And rounding things up to the next multiple of 25 does seem to help, so lets' do that. I also tried roundup(..., 5) but that wasn't sufficient. Also I have no idea if we might need this sort of thing on gen9+ as well. These are the original EI/thresholds: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10250 GEN6_RP_UP_THRESHOLD 9225 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 8000 GEN6_RP_UP_THRESHOLD 6800 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 These are after 8a586437: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10156 GEN6_RP_UP_THRESHOLD 9140 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7812 GEN6_RP_UP_THRESHOLD 6640 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 And these are what we have after this patch: LOW_POWER GEN6_RP_UP_EI 12500 GEN6_RP_UP_THRESHOLD 11875 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 21250 BETWEEN GEN6_RP_UP_EI 10175 GEN6_RP_UP_THRESHOLD 9150 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 18750 HIGH_POWER GEN6_RP_UP_EI 7825 GEN6_RP_UP_THRESHOLD 6650 GEN6_RP_DOWN_EI 25000 GEN6_RP_DOWN_THRESHOLD 15000 Cc: stable@vger.kernel.org Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Testcase: igt/kms_pipe_crc_basic/hang-read-crc-pipe-B Fixes: 8a586437 ("drm/i915/skl: Restructured the gen6_set_rps_thresholds function") Signed-off-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
-
Shashank Sharma authored
This patch does the following: - Fakes live status of HDMI as connected (even if that's not). While testing certain (monitor + cable) combinations with various intel platforms, it seems that live status register doesn't work reliably on some older devices. So limit the live_status check for HDMI detection, only for platforms from gen7 onwards. V2: restrict faking live_status to certain platforms V3: (Ville) - keep the debug message for !live_status case - fix indentation of comment - remove "warning" from the debug message (Jani) - Change format of fix details in the commit message Fixes: 237ed86c ("drm/i915: Check live status before reading edid") Cc: stable@vger.kernel.org # v4.4 Suggested-by: -
Imre Deak authored
It's possible that BIOS enables PHY0, but it programmes only the first channel on it. Since we program the PHYs only during driver loading this is an incorrect configuration from the driver's point of view, since we may use both channels eventually. Detect this scenario and force reprogramming the PHY in this case. The actual scenario for me was that the lane optimization for the second channel in PHY0 was not setup by BIOS and so a state verification warning was triggered. Everything else was setup properly. Signed-off-by:
-
Imre Deak authored
If we skipped PHY0 initialization because it was already enabled by BIOS, we still have to wait for the PHY1 GRC calibration as that is done as part of the PHY0 init. v2: - Use the actual PHY index in the debug message in broxton_phy_wait_grc_done() (Ville) CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
It's possible that BIOS enables PHY1 only to read out the GRC value from it to be used in PHY0 and then disables PHY1. In this case we can't use the PHY1 GRC value for state verification, so use instead the one in PHY0 always. Signed-off-by:
-
Matthew Auld authored
Remove dev local and use to_i915() in gen8_ppgtt_notify_vgt. v2: use dev_priv directly for QUESTION_MACROS (Joonas Lahtinen) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Right after runtime resume we know that we can re-enable DC5, since we just disabled DC9 and power well 2 is disabled. So enable DC5 explicitly instead of delaying this until the next time we disable power well 2. Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-5-git-send-email-imre.deak@intel.com
-
Imre Deak authored
After suspend-to-ram or -disk we don't know what power state the display HW will be, DC0 or DC9 are both possible states, so reset the software DC state tracking in these cases. This gets rid of 'DC state mismatch' error messages during resuming from ram or disk where we expected to be in DC9 (as set by the suspend handler) but we are in DC0. v2: - Remove extra WS in gen9_sanitize_dc_state() (Bob) Signed-off-by:
-
Imre Deak authored
Atm, we run the BSpec display core uninit/init sequences twice during system suspend/resume. While this shouldn't cause any problem, it's redundant, so get rid of the duplicate call. Signed-off-by:
-
Imre Deak authored
Initially we thought that the platform specific suspend/resume sequences can be shared between the runtime and system suspend/resume handlers. This turned out to be not true, we have quite a few differences on most of the platforms. This was realized already earlier by Paulo who inlined the platform specific resume_prepare handlers. We have the same problem with the corresponding suspend_complete handlers, there are platform differences that make it unfeasible to share the code between the runtime and system suspend paths. Also now we call functions that need to be paired like hsw_enable_pc8()/hsw_disable_pc8() from different levels of the call stack, which is confusing. Fix this by inlining the suspend_complete handlers too. This is also needed by the next patch that removes a redundant uninit/init call during system suspend/resume on BXT. No functional change. CC: Paulo Zanoni <przanoni@gmail.com> Signed-off-by:
-
- 21 Apr, 2016 1 commit
-
-
Imre Deak authored
In commit 5f304c87 ("drm/i915/kbl: Reset secondary power well requests left on by DMC/KVMR") I forgot about the fact that SKL==KBL most of the time and that a secondary MISC IO power well request left on by the DMC is "expected". Tune down the corresponding WARN to be a debug message. This was caught by CI suspend tests. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
- 20 Apr, 2016 11 commits
-
-
Mika Kahola authored
It was noticed on bug #94087 that module parameter i915.edp_vswing=2 that should override the VBT setting to use default voltage swing (400 mV) was not applied for Broadwell. This patch provides a fix for this by checking if default i.e. higher voltage swing is requested to be used and applies the DDI translations table for DP instead of eDP (low vswing) table. v2: Combine two if statements into one (Jani) v3: Change dev_priv->edp_low_vswing to use dev_priv->vbt.edp.low_vswing Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94087Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461155942-7749-1-git-send-email-mika.kahola@intel.com Cc: stable@vger.kernel.org Signed-off-by:
-
Dave Gordon authored
The newly-introduced function i915_gem_object_pin_map() returns an ERR_PTR (not NULL) if the pin-and-map opertaion fails, so that's what we must check for. And it's nicer not to assign such a pointer-or-error to a structure being filled in until after it's been validated, so we should keep it local and avoid exporting a bogus pointer. Also, for clarity and symmetry, we should clear 'virtual_start' along with 'vma' when unmapping a ringbuffer. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Dave Gordon authored
Tidying up guc_init_proc_desc() and adding commentary to the client structure after the recent change in GuC page mapping strategy. Signed-off-by:
-
Alex Dai authored
Now that we keep the GuC client process descriptor permanently mapped, we don't really need to keep a local copy of the GuC's work-queue-head. So we can simplify the code a little by not doing this. Signed-off-by:
Alex Dai <yu.dai@intel.com> Signed-off-by:
-
Dave Gordon authored
Don't use kmap_atomic() for doorbell & process descriptor access. This patch fixes the BUG shown below, where the thread could sleep while holding a kmap_atomic mapping. In order not to need to call kmap_atomic() in this code path, we now set up a permanent kernel mapping of the shared doorbell and process-descriptor page, and use that in all doorbell and process-descriptor related code. BUG: scheduling while atomic: gem_close_race/1941/0x00000002 Modules linked in: hid_generic usbhid i915 asix usbnet libphy mii i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm coretemp i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel acpi_pad nls_iso8859_1 e1000e ptp psmouse pps_core ahci libahci CPU: 0 PID: 1941 Comm: gem_close_race Tainted: G U 4.4.0-160121+ #123 Hardware name: Intel Corporation Skylake Client platform/Skylake AIO DDR3L RVP10, BIOS SKLSE2R1.R00.X100.B01.1509220551 09/22/2015 0000000000013e40 ffff880166c27a78 ffffffff81280d02 ffff880172c13e40 ffff880166c27a88 ffffffff810c203a ffff880166c27ac8 ffffffff814ec808 ffff88016b7c6000 ffff880166c28000 00000000000f4240 0000000000000001 Call Trace: [<ffffffff81280d02>] dump_stack+0x4b/0x79 [<ffffffff810c203a>] __schedule_bug+0x41/0x4f [<ffffffff814ec808>] __schedule+0x5a8/0x690 [<ffffffff814ec927>] schedule+0x37/0x80 [<ffffffff814ef3fd>] schedule_hrtimeout_range_clock+0xad/0x130 [<ffffffff81090be0>] ? hrtimer_init+0x10/0x10 [<ffffffff814ef3f1>] ? schedule_hrtimeout_range_clock+0xa1/0x130 [<ffffffff814ef48e>] schedule_hrtimeout_range+0xe/0x10 [<ffffffff814eef9b>] usleep_range+0x3b/0x40 [<ffffffffa01ec109>] i915_guc_wq_check_space+0x119/0x210 [i915] [<ffffffffa01da47c>] intel_logical_ring_alloc_request_extras+0x5c/0x70 [i915] [<ffffffffa01cdbf1>] i915_gem_request_alloc+0x91/0x170 [i915] [<ffffffffa01c1c07>] i915_gem_do_execbuffer.isra.25+0xbc7/0x12a0 [i915] [<ffffffffa01cb785>] ? i915_gem_object_get_pages_gtt+0x225/0x3c0 [i915] [<ffffffffa01d1fb6>] ? i915_gem_pwrite_ioctl+0xd6/0x9f0 [i915] [<ffffffffa01c2e68>] i915_gem_execbuffer2+0xa8/0x250 [i915] [<ffffffffa00f65d8>] drm_ioctl+0x258/0x4f0 [drm] [<ffffffffa01c2dc0>] ? i915_gem_execbuffer+0x340/0x340 [i915] [<ffffffff8111590d>] do_vfs_ioctl+0x2cd/0x4a0 [<ffffffff8111eac2>] ? __fget+0x72/0xb0 [<ffffffff81115b1c>] SyS_ioctl+0x3c/0x70 [<ffffffff814effd7>] entry_SYSCALL_64_fastpath+0x12/0x6a ------------[ cut here ]------------ v4: Only tear down doorbell & kunmap() client object if we actually succeeded in allocating a client object (Tvrtko Ursulin) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93847Original-version-by: -
Chris Wilson authored
Since we can only swap out shmemfs objects, those are the only ones that can influence the ability of the shrinker to free pages. Currently, all non-shmemfs objects have a raised pages_pin_count to protect them from the shrinker, so this just makes the logic for can_release_pages() clearer (and safer in future so that we don't over estimate our ability to free up pages from future non-swappable objects). Signed-off-by:
-
Chris Wilson authored
Inside the shrinker we call can_release_pages() to indicate whether or not we can make forward progress in freeing up memory by unbinding that object. When adding our report to oom, we should be using the same logic. Whilst here, change the reporting from bytes to pages so that it looks smaller to the user!, is consistent with the neighbouring oom report itself which displays counts in pages, and makes the unsigned long overflow less likely. v2: Split oversized format string into two lines Signed-off-by:
-
Chris Wilson authored
When iterating over the bound list, we expect all objects there to have their pages pinned (by the bound VMA). So only report those objects with additional pin count on their pages as "pinned". These should be those objects used for display and hardware access. Reported-by:
-
Tvrtko Ursulin authored
Just two WARN_ONs followed by pointer dereference I spotted by accident. v2: Remove some more of the same. Signed-off-by:
-
Tvrtko Ursulin authored
Looks like DPF was not implemented for gen8+ but the IER and IMR are still enabled on initialization. Since there is no code to handle this interrupt, gate the irq enablement behind HAS_L3_DPF in case the feature gets enabled in the future. Signed-off-by:
-
Tim Gore authored
WaEnableSamplerGPGPUPreemptionSupport fixes a problem related to mid thread pre-emption. Signed-off-by:
Tim Gore <tim.gore@intel.com> Reviewed-by:
-
