- 04 May, 2017 2 commits
-
-
Shawn Guo authored
The CSC (Color Space Conversion) block in VOU is used by not only Graphic Layer (plane) but also channel (CRTC) module. Let's move its register definitions into a common header, so that CRTC driver can include it when needed. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1491490870-6330-3-git-send-email-shawnguo@kernel.org
-
Shawn Guo authored
Some VOU modules do not work well with clock auto-gating. For example, VGA I2C bus will fail to read EDID data from monitor. Let's not enable this feature by default, and leave it to the possible future low-power optimization. Signed-off-by:
-
- 03 May, 2017 1 commit
-
-
Gustavo Padovan authored
Use "non-blocking" and "blocking" instead of old names. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by:
-
- 02 May, 2017 3 commits
-
-
Jeffy Chen authored
Remove unused check and variables after: drm/rockchip: Set line flag config register in vop_crtc_enable Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jyri Sarha authored
Change drm_atomic_replace_property_blob_from_id()'s first parameter from drm_crtc to drm_device, so that the function can be used for other drm_mode_objects too. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jyri Sarha authored
Signed-off-by:
-
- 27 Apr, 2017 2 commits
-
-
Andres Rodriguez authored
When a timeout of zero is specified, the caller is only interested in the fence status. In the current implementation, dma_fence_default_wait will always call schedule_timeout() at least once for an unsignaled fence. This adds a significant overhead to a fence status query. Avoid this overhead by returning early if a zero timeout is specified. v2: move early return after enable_signaling Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Jeffy Chen authored
We need to set vop config done after update line flag config, it's a new requirement for chips newer than rk3368. Since we would only use line flag irq for vact_end, let's move it to vop_crtc_enable. Signed-off-by:
-
- 21 Apr, 2017 1 commit
-
-
Clint Taylor authored
Adding DPCD register definitions from the DP 1.3 specification for CEC over AUX support. V2: Add DP_ prefix to all defines. V3: missed prefixes from the ESI1 defines Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
- 20 Apr, 2017 3 commits
-
-
Navare, Manasi D authored
Display stream compression is supported on DP 1.4 DP devices. This patch adds the corersponding DPCD register definitions for DSC. v4: * Add DSC Enable DPCD register def (Ander) v3: * Add some SHIFTS and MASKS for uniformity (Jani Nikula) v2: * Rebased on drm-tip Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Romain Perier authored
Currently, the audio sampler clock is enabled from dw_hdmi_setup() at step E. and is kept enabled for later use. This clock should be enabled and disabled along with the actual audio stream and not always on (that is bad for PM). Furthermore, as described by the datasheet, the I2S variant needs to gate/ungate the clock when the stream is enabled/disabled. This commit adds a parameter to hdmi_audio_enable_clk() that controls when the audio sample clock must be enabled or disabled. Then, it adds the call to this function from dw_hdmi_i2s_audio_enable() and dw_hdmi_i2s_audio_disable(). Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Romain Perier <romain.perier@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170414083113.4255-3-romain.perier@collabora.comSigned-off-by:
Archit Taneja <architt@codeaurora.org>
-
Romain Perier authored
Currently, CTS+N is forced to zero as a workaround of the IP block for i.MX platforms. This is requested in the datasheet of the corresponding IP for AHB mode only. However, we have seen that it introduces glitches or delays when playing a sound on HDMI for I2S mode. This proves that we cannot keep the current functions for handling audio stream as-is if these contain workaround that are specific to a mode. This commit introduces two callbacks, one for each variant. dw_hdmi_setup defines the right function depending on the detected variant. Then, the exported functions dw_hdmi_audio_enable and dw_hdmi_audio_disable calls the corresponding callbacks Reviewed-by:
-
- 18 Apr, 2017 7 commits
-
-
Eric Anholt authored
Until now, we've had to limit Raspberry Pi to 256MB of CMA memory to keep from triggering the hardware addressing bug between the tile binner and the tile alloc memory (where the top 4 bits come from the tile state data array's address). To work around that and allow more memory to be reserved for graphics, allocate a single BO to store tile state data arrays and tile alloc/overflow memory while the GPU is active, and make sure that that one BO doesn't happen to cross a 256MB boundary. With that in place, we can allocate textures and shaders anywhere in system memory (still contiguous, of course). Signed-off-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170327231025.19391-1-eric@anholt.netReviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
Eric Anholt authored
We were returning without decrementing if the error happened, meaning that at the next submit we wouldn't try to bring up the power domain. Signed-off-by:
-
Boris Brezillon authored
The HDMI driver is currently enabling all clocks at probe time and keeps the power-domain connected to the HDMI encoder enabled. Move all activation code to vc4_hdmi_encoder_enable() and make sure the clks and power domain are released when the HDMI encoder is not used by adding deactivation steps in vc4_hdmi_encoder_disable(). Note that the sequencing imposed by the IP requires that we move vc4_hdmi_encoder_mode_set() code into vc4_hdmi_encoder_enable(). Signed-off-by:
-
Eric Anholt authored
The stub get_unmapped_area() function was actually getting called, so all of our mmap()s failed. Cc: Yannick Fertre <yannick.fertre@st.com> Fixes: 97bf3a9a ("drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area") Signed-off-by:
-
Daniel Vetter authored
All the error codes we (ab)use are strictly not the right ones (since they're all for the vfs, and the only thing we're allowed to do from an ioctl is EINVAL). But ENOENT is the common error code for failed to look up an object throughout drm, so let's use it in the cma helpers, too. Note that this does change uabi for some drivers, but that shouldn't ba a problem: - other drivers (e.g. i915) already return ENOENT for invalid gem bo - userspace tends to only check for errors, not specific ones (except when ioctl restarting is needed) - if the gem bo isn't there a previous step (either creating or importing it) failed already, this situation should always be a userspace bug. Changing it does help with debugging userspace bugs though, by making error reporting more consistent. Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418121120.31862-1-daniel.vetter@ffwll.ch
-
Dave Airlie authored
sync_file uses the reference count of the file, the internal kref was never getting moved past 1. We can reintroduce this if we decide we need it later. [airlied: fix buildbot warnings] Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Daniel Vetter authored
Motivated by a request from Eric. v2: Take in suggestions from Lionel Cc: Eric Anholt <eric@anholt.net> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
- 14 Apr, 2017 5 commits
-
-
Yannick Fertre authored
Add Philippe Cornu and myself as maintainers. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Signed-off-by:
-
Yannick Fertre authored
This controller provides output signals to interface directly a variety of LCD and TFT panels. These output signals are: RGB signals (up to 24bpp), vertical & horizontal synchronisations, data enable and the pixel clock. Reviewed-by:
-
Yannick Fertre authored
This patch adds documentation of device tree bindings for the STM32 LTDC (Lcd-Tft Display Controller). Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yannick Fertre authored
Add function drm_fb_cma_get_gem_addr() which return the physical address of framebuffer (1st pixel). This function will usually be called by plane callback (atomic_update). Signed-off-by:
-
Yannick Fertre authored
Missing field get_unmapped_area which is necessary with device without MMU Signed-off-by:
-
- 13 Apr, 2017 4 commits
-
-
Eric Anholt authored
This is needed for proper synchronization with display on another DRM device (pl111 or tinydrm) with buffers produced by vc4 V3D. Fixes the new igt vc4_dmabuf_poll testcase, and rendering of one of the glmark2 desktop tests on pl111+vc4. This doesn't yet introduce waits on another device's fences before vc4's rendering/display, because I don't have testcases for them. v2: Reuse dma_fence_free(), retitle commit message to clarify that it's not a full dma-buf fencing implementation yet. Signed-off-by: -
Liu Ying authored
Trivial fix. Some dev_err messages in this driver are missing \n, so add them. Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491877339-19913-1-git-send-email-gnuiyl@gmail.com
-
Daniel Vetter authored
Forgot to add this :( Fixes: 19315294 ("drm: Add acquire ctx parameter to ->plane_disable") Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DRM_DEBUG_ATOMIC debug message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 10 Apr, 2017 1 commit
-
-
Archit Taneja authored
Add Laurent as a reviewer and Andrzej as a maintainer for DRM bridge chip drivers. They actively review and contribute to bridge drivers and the bridge API. Acked-by:
-
- 07 Apr, 2017 11 commits
-
-
Sean Paul authored
This reverts commit b8dfa821 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Apr 7 12:17:12 2017 +0100 drm: Don't allow interruptions when opening debugfs/crc It reportedly breaks things, so let's revert now and try again later. Fixes: b8dfa821 ("drm: Don't allow interruptions when opening debugfs/crc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reported-by:
-
Daniel Vetter authored
I thought I've fixed this, but maybe not. Anyway, clearly broken, and easy fix. Cc: Tony Lindgren <tony@atomide.com> Reported-by:
Tony Lindgren <tony@atomide.com> Fixes: b95ff031 ("drm: Remove drm_modeset_(un)lock_crtc") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
Daniel Vetter authored
I've broken this by removing the backoff handling from the set_config2atomic helper in commit 38b6441e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 22 22:50:58 2017 +0100 drm/atomic-helper: Remove the backoff hack from set_config Fixing this properly would mean we get to wire the acquire_ctx all the way through vmwgfx fbdev code, and doing the same was tricky for the shared fbdev layer. Probably much better to look into refactoring the entire code to use the helpers, but since that's not a viable long-term solution fix the issue by open-coding a vmwgfx version of set_config, that does the legacy backoff dance internally. Note: Just compile-tested. The idea is to take drm_mode_set_config_internal(), remove the "is this a legacy driver" check, and whack the drm_atomic_legacy_backoff trickery at the end. Since drm_atomic_legacy_backoff is for atomic commits only we need to open-code it. Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Jeffy Chen authored
Signed-off-by:
-
Jeffy Chen authored
Current drm bind/unbind sequence would cause some memory issues. For example we should not cleanup iommu before cleanup mode config. Reorder bind/unbind sequence, follow exynos drm. Signed-off-by:
-
Jeffy Chen authored
The clock is enabled when binding cdn dp. Signed-off-by:
-
Jeffy Chen authored
The clocks are prepared when binding vop. Signed-off-by:
-
Jeffy Chen authored
We're trying to access vop registers here, so need to make sure the pm domain is on. Normally it should be enabled by the bootloader, but there's no guarantee of it. And if we wanna do unbind/bind, it would also cause the device to hang. And this patch also does these: 1/ move vop_initial to the end of vop_bind for eaiser error handling. 2/ correct the err_put_pm_runtime of vop_enable. Signed-off-by:
-
Jeffy Chen authored
After snd_soc_unregister_codec, the dai link would remain bound to the invalid codec. That would cause crashes after unbind dp driver. Let's unregister audio codec when removing dp driver to prevent that. Signed-off-by:
-
Jeffy Chen authored
Signed-off-by:
-
Jeffy Chen authored
Normally we do this in drm_mode_config_cleanup. But: 1/ analogix dp's connector is allocated in bind, and freed after unbind. So we need to destroy it in unbind to avoid further access. 2/ the drm bridge is attached in bind, and detached in encoder cleanup. So we need to destroy encoder in unbind. Signed-off-by:
-
