- 19 Aug, 2020 22 commits
-
-
Arnd Bergmann authored
This header is empty and conflicts with the s3c24xx version of the same file when we merge the two, so stop including it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200806182059.2431-19-krzk@kernel.orgSigned-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Arnd Bergmann authored
The plat-samsung directory and mach-s5pv210 can be build completely independently, so split the two Kconfig symbols CONFIG_PLAT_SAMSUNG and CONFIG_ARCH_S5PV210. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Thierry Reding <thierry.reding@gmail.com> Acked-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-18-krzk@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
The pm save/restore code is fairly small, so in order to separate the s3c and s5p platforms, adding an s5p specific copy instead of sharing it is actually easier. Signed-off-by:
-
Arnd Bergmann authored
This is the only part of plat-samsung that is really shared between the s3c and s5p ports. Moving it to drivers/soc/ lets us make them completely independent. Signed-off-by:
-
Arnd Bergmann authored
Now that no code in arch/arm is shared between mach-exynos and the others, make the split formal. Signed-off-by:
-
Arnd Bergmann authored
The only part of plat-samsung that is shared with arch-exynos is the CPU identification code. Having a separate exynos_cpu_id variable makes the two completely independent and is actually a bit less code in total. Signed-off-by:
-
Arnd Bergmann authored
Before we can separate plat-samsung from the individual platforms, this one has to get moved to a place where it remains accessible. Signed-off-by:
-
Arnd Bergmann authored
The pm-debug code is one of the few things shared between s3c24xx/s3c64xx and the newer s5pv210. In order to make s5pv210 independent of plat-samsung, change the common bits of this code to no longer reference the s3c specific bits. In particular, all the CPU checks need to be moved out of the common code into platform specific files. Signed-off-by:
-
Arnd Bergmann authored
On s3c24xx and s3c64xx, this is just a wrapper around s3c_pm_debug_init_uart(), but this function does not exist on s5pv210, which always uses an empty stub as CONFIG_SAMSUNG_ATAGS is normally not set. In a configuration that supports both s5pv210 and s3c64xx, we would always call the s3c64xx function, which is probably incorrect when running on s5pv210. Remove the function call completely on s5pv210 and skip the wrapper on s3c as a cleanup. As a side-effect, the s3c64xx behavior is now always the same, regardless of whether it is a DT-only configuration or both DT and ATAGS are supported for booting. Signed-off-by:
-
Arnd Bergmann authored
This file has not had any callers since linux-4.7, so stop building it. Fixes: 5901f4c2 ("ARM: EXYNOS: Remove SROM related register settings from mach-exynos") Signed-off-by:
-
Krzysztof Kozlowski authored
Remove unused 'udc' variable to fix compile warnings: drivers/usb/gadget/udc/s3c2410_udc.c: In function 's3c2410_udc_dequeue': drivers/usb/gadget/udc/s3c2410_udc.c:1268:22: warning: variable 'udc' set but not used [-Wunused-but-set-variable] Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200731074122.6484-1-krzk@kernel.org
-
Arnd Bergmann authored
There is no real phy driver, so s3c-hsudc just pokes the registers itself. Improve this a little by making it a platform data callback like we do for gpios. There is only one board using this driver, and it's unlikely that another would be added, so this is a minimal workaround. Signed-off-by:
-
Arnd Bergmann authored
The resources are correctly initialized, so just use them instead of relying on hardcoded data from platform headers. Signed-off-by:
Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-8-krzk@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
s3c24xx has a custom implementation of the inb/outb family of I/O accessors, implementing both general register access and ISA I/O port through a multiplexer. As far as I can tell, the first case has never been needed, and certainly is not used now, as drivers only use inb/outb to actually driver ISA or PCI port I/O. Similarly, the special ISA support is limited to a single machine, the Simtec Electronics BAST (EB2410ITX) with its PC/104 expansion connector, all other machines could simply use the generic implementation from asm/io.h that expects a single memory-mapped address range for byte, word and dword access. As no other machines besides BAST actually selects CONFIG_ISA, this is likely not even necessary. As a cleanup, remove support for the non-ISA access from the helpers, and make the ISA access use the virtual address window that we use elsewhere for PCI I/O ports. In configurations without the BAST machine, this now falls back on the generic implementation from asm/io.h, but the mach/io.h header is still relied on to include a number of other header files implicitly. Signed-off-by:
-
Krzysztof Kozlowski authored
Passing pointers directly as platform data is fragile and undocumented. Better to create a platform data structure which explicitly documents what is passed to the driver. Suggested-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-6-krzk@kernel.org
-
Arnd Bergmann authored
The clk driver uses both a function call into an exported platform file and a direct register access to a hardcoded virtual address for accessing the MISCCR register, both become are a problem for a multiplatform kernel because of the header file dependency. Make this an indirect function call through platform data instead. Signed-off-by:
-
Arnd Bergmann authored
There are two functions in this file that are never called from anywhere else, so they should be static to allow the compiler to optimize it better and not pollute the global namespace. Signed-off-by:
-
Arnd Bergmann authored
The gpio controller names differ between s3c24xx and s3c64xx, and it seems that these all got the wrong names, using GPx instead of GPIOx. Fixes: d2951dfa ("mmc: s3cmci: Use the slot GPIO descriptor") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200806182059.2431-3-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Commit f6361c6b ("ARM: S3C24XX: remove separate restart code") removed usage of the watchdog reset platform code in favor of the Samsung SoC watchdog driver. However the latter was not selected thus S3C24xx platforms lost reset abilities. Cc: <stable@vger.kernel.org> Fixes: f6361c6b ("ARM: S3C24XX: remove separate restart code") Signed-off-by:
-
Krzysztof Kozlowski authored
Similarly to commit f6361c6b ("ARM: S3C24XX: remove separate restart code"), the platform watchdog reset code can be removed in favor of a generic watchdog driver which already handles reset. This allows removal of a bunch of machine code and fixes also W=1 compile warnings: arch/arm/plat-samsung/watchdog-reset.c:29:6: warning: no previous prototype for 'samsung_wdt_reset' [-Wmissing-prototypes] arch/arm/plat-samsung/watchdog-reset.c:69:13: warning: no previous prototype for 'samsung_wdt_reset_of_init' [-Wmissing-prototypes] arch/arm/plat-samsung/watchdog-reset.c:89:13: warning: no previous prototype for 'samsung_wdt_reset_init' [-Wmissing-prototypes] The generic watchdog-based system reset is not exactly the same as before. The previous method had a fallback to soft_restart() which now is gone. The commit also removes a FIXME note about calling s3c64xx_clk_init() inside s3c64xx_init_irq(). No one fixed this since long time and the note is not meaningful anymore because watchdog part is removed. Signed-off-by:
-
Krzysztof Kozlowski authored
A separate Kconfig option HAVE_S3C2410_WATCHDOG for Samsung SoCs is not really needed and the s3c24xx watchdog driver can depend on Samsung ARM architectures instead. The "HAVE_xxx_WATCHDOG" pattern of dependency is not popular and Samsung platforms are here exceptions. All others just depend on CONFIG_ARCH_xxx. This makes the code slightly smaller without any change in functionality. Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Krzysztof Kozlowski authored
The s3c-camif driver setup platform code does not have any users so it can be safely removed. Along with the code W=1 compile warnings go away: arch/arm/mach-s3c24xx/setup-camif.c:28:5: warning: no previous prototype for 's3c_camif_gpio_get' [-Wmissing-prototypes] arch/arm/mach-s3c24xx/setup-camif.c:56:6: warning: no previous prototype for 's3c_camif_gpio_put' [-Wmissing-prototypes] Signed-off-by:
-
- 17 Aug, 2020 17 commits
-
-
Krzysztof Kozlowski authored
Fix W=1 compile warnings (invalid kerneldoc): arch/arm/plat-samsung/pm-common.c:68: warning: Function parameter or member 'ptr' not described in 's3c_pm_do_restore_core' arch/arm/plat-samsung/pm-common.c:68: warning: Function parameter or member 'count' not described in 's3c_pm_do_restore_core' Signed-off-by: -
Krzysztof Kozlowski authored
The s3cmci driver does not use machine header mach/dma.h. Signed-off-by:
-
Krzysztof Kozlowski authored
Not all units use the contents of mach/hardware.h and mach/dma.h. Remove these includes when not needed. Signed-off-by:
-
Krzysztof Kozlowski authored
Document function argument in kerneldoc comment to fix W=1 compile warning: arch/arm/mach-s3c24xx/setup-ts.c:27: warning: Function parameter or member 'dev' not described in 's3c24xx_ts_cfg_gpio' Signed-off-by: -
Krzysztof Kozlowski authored
Include platform_data/touchscreen-s3c2410.h header in the touchscreen code to bring the prototypes of defined functions and fix W=1 compile warning: arch/arm/mach-s3c24xx/setup-ts.c:24:6: warning: no previous prototype for 's3c24xx_ts_cfg_gpio' [-Wmissing-prototypes] Signed-off-by: -
Krzysztof Kozlowski authored
Include plat/sdhci.h header in the sdhci code to bring the prototypes of defined functions and fix W=1 compile warnings: arch/arm/mach-s3c24xx/setup-sdhci-gpio.c:21:6: warning: no previous prototype for 's3c2416_setup_sdhci0_cfg_gpio' [-Wmissing-prototypes] arch/arm/mach-s3c24xx/setup-sdhci-gpio.c:26:6: warning: no previous prototype for 's3c2416_setup_sdhci1_cfg_gpio' [-Wmissing-prototypes] Signed-off-by: -
Krzysztof Kozlowski authored
Include common.h header in the s3c2443.c to bring the prototypes of defined functions and fix W=1 compile warnings: arch/arm/mach-s3c24xx/s3c2443.c:60:12: warning: no previous prototype for 's3c2443_init' [-Wmissing-prototypes] arch/arm/mach-s3c24xx/s3c2443.c:77:13: warning: no previous prototype for 's3c2443_init_uarts' [-Wmissing-prototypes] arch/arm/mach-s3c24xx/s3c2443.c:88:13: warning: no previous prototype for 's3c2443_map_io' [-Wmissing-prototypes] Signed-off-by: -
Krzysztof Kozlowski authored
Remove the arch/arm/plat-samsung/include/plat/samsung-time.h header and move the contents to common.h headers in mach-s3c24xx and mach-s3c64xx. The definition of declared functions is already in common.c in mach directories, so it is logically to put declaration next to them. This is also one step further towards removal of plat-samsung directory and it fixes W=1 build warnings: arch/arm/mach-s3c64xx/common.c:174:13: warning: no previous prototype for 'samsung_set_timer_source' [-Wmissing-prototypes] arch/arm/mach-s3c64xx/common.c:180:13: warning: no previous prototype for 'samsung_timer_init' [-Wmissing-prototypes] Signed-off-by: -
Krzysztof Kozlowski authored
The s3c2410_common_clk_init() and others are defined and used by the clk-s3c24xx driver and also used in the mach-s3c24xx machine code. Move the declaration to a header to fix W=1 build warnings: drivers/clk/samsung/clk-s3c2410.c:320:13: warning: no previous prototype for 's3c2410_common_clk_init' [-Wmissing-prototypes] 320 | void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, drivers/clk/samsung/clk-s3c2412.c:205:13: warning: no previous prototype for 's3c2412_common_clk_init' [-Wmissing-prototypes] 205 | void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, drivers/clk/samsung/clk-s3c2443.c:341:13: warning: no previous prototype for 's3c2443_common_clk_init' [-Wmissing-prototypes] 341 | void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, Signed-off-by:Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by:
-
Krzysztof Kozlowski authored
The s3c64xx_clk_init() is defined and used by the clk-s3c64xx driver and also used in the mach-s3c64xx machine code. Move the declaration to a header to fix W=1 build warning: drivers/clk/samsung/clk-s3c64xx.c:391:13: warning: no previous prototype for 's3c64xx_clk_init' [-Wmissing-prototypes] 391 | void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, Signed-off-by: -
Krzysztof Kozlowski authored
Fix Complie -> Compile Signed-off-by:
-
Krzysztof Kozlowski authored
Remove kerneldoc annotation to fix warning: arch/arm/mach-s3c24xx/mach-h1940.c:185: warning: cannot understand function prototype: 'struct s3c2410fb_display h1940_lcd __initdata = ' Signed-off-by:Randy Dunlap <rdunlap@infradead.org>
-
Krzysztof Kozlowski authored
Include the spi-s3c64xx.h header to fix W=1 build warning: arch/arm/mach-s3c64xx/setup-spi.c:11:5: warning: no previous prototype for 's3c64xx_spi0_cfg_gpio' [-Wmissing-prototypes] 11 | int s3c64xx_spi0_cfg_gpio(void) Signed-off-by: -
Stephen Kitt authored
The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. This avoids scanning the identifier tables during probes. Signed-off-by:Stephen Kitt <steve@sk2.org> Acked-by:
Wolfram Sang <wsa@kernel.org> Reviewed-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Krzysztof Kozlowski authored
The Samsung SoC maintainer entry covers drivers and headers matching "exynos" name but except that there are also files for S3C24xx, S3C64xx and S5Pv210 SoCs. These sometimes do not have a separate entry for a driver maintainer thus might miss review. Add them to the Samsung SoC maintainer entry to cover all SoCs with name matches. Signed-off-by:
-
Krzysztof Kozlowski authored
Vincent Sanders' email bounces with code 550 (user does not exist) so remove the entry from Simtec S3C24xx boards. Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: -
Qinglang Miao authored
The function clk_get() returns ERR_PTR() in case of error and never returns NULL. So there's no need to test whether xusbxti is NULL, just remove the redundant part in the return value check. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
- 16 Aug, 2020 1 commit
-
-
Linus Torvalds authored
-
