- 10 Dec, 2006 40 commits
-
-
Michael Hunold authored
Change order of module requests, so that tuner module is loaded at the end, because the tuner module probes multiple i2c addresses and might grab an i2c address that is not a tuner but something else. Signed-off-by:
Michael Hunold <hunold@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew Morton authored
drivers/media/dvb/ttpci/budget-ci.c:220:6: warning: "LINUX_VERSION_CODE" is not defined drivers/media/dvb/ttpci/budget-ci.c:220:28: warning: "KERNEL_VERSION" is not defined drivers/media/dvb/ttpci/budget-ci.c:220:42: error: missing binary operator before token "(" Signed-off-by:Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
In some cases when using VSB, the AGC status register has been known to falsely report "no signal" when in fact there is a carrier lock. The datasheet labels these status flags as QAM only, yet the lgdt330x module is using these flags for both QAM and VSB. This patch allows for the carrier recovery lock status register to be tested, even if the agc signal status register falsely reports no signal. Thanks to jcrews from #linuxtv in irc, for initially reporting this bug. Signed-off-by:
-
Adrian Bunk authored
The VIDEO_ZR36120 driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
-
Hans Verkuil authored
Remove coding style inconsistencies. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Andrew de Quincey authored
This caused compilation to fail - completely replaced by new style functions, so can be removed. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Thomas Kaiser authored
If your device is using the philips tda1316 tuner, i think there is a problem in setting the correct Band. 162 MHz and above should be band 2 (Mid-Band). But in dvbc_philips_tdm1316l_tuner_set_params band 1 is set for frequencies below 200 MHz. Signed-off-by:
Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by:
-
David Hardeman authored
Change the debounce logic so that it is not used at all unless the debounce parameter has been set. This makes for a much "snappier" remote for most users as there is no timeout to wait for (the debounce logic has a 350ms timer for the next repeat, but with the RC5 protocol, one event per ~110ms is possible) Signed-off-by:
David Hardeman <david@hardeman.nu> Signed-off-by:
-
David Hardeman authored
This adds a ir_debug parameter which is useful in tracking down IR decoding problems. Based on Darren Salt's dvb-ir patchset. Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
-
David Hardeman authored
Decode the RC5 device byte as well as the command byte. Introduce a parameter to set the device events to listen for. Default to try to auto-detect the proper device code, otherwise, listen to any device as the old code did. Based on Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
This converts the budget-ci driver so that it uses ir-common for some of its IR processing. In particular, the keymap for the Nova-T (sub 13c2:1011) is switched to the Hauppauge grey/black keymap, of which the keys on the supplied R808 remote control form a subset. The old budget-ci keymap is moved to ir-keymaps.c and is used for other remotes. The debounce logic for buggy remotes (i.e. Zenith) is made conditional the new debounce parameter and defaults to off (so that repeat keypresses aren't ignored for all working remotes). Some parts are based on Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
Trivial change to help the user understand what went wrong. Taken from Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
Improve the error checking in the IR init and deinit functions. Based on Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
This patch adds a 'phys' string, of the same form as used by various other DVB cards' IR drivers, for access by any program which uses the EVIOCPHYS ioctl or may read /sys/class/input/*/phys (e.g. udev) to identify input device nodes. Taken from Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
This patch lays down some groundwork for later budget-ci patches. The bulk of this consists of moving a few members into a new struct and renaming a few of them. It also allocates extra space for the device name (the "name" field in /proc/bus/input/devices and in the relevant sysfs dir) to avoid truncation and uses snprintf rather than sprintf in case the extra space shouldn't be enough. Taken from Darren Salt's dvb-ir patchset Signed-off-by:
-
Hartmut Hackmann authored
The change does the following: - At device open, it sets the recording source to the current input instead of LINE2. So it is no longer necessary to set the recording source with a mixer application. - Connects the mixer volume control to the input sensitivity selection of the analog sound inputs. This allows only one 6db step. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Michael Krufky authored
Use return value of dvb_pll_configure() to fill priv->frequency In lgh06xf_set_params: Rename int variable "err" to "result". Remove needless calculation of the set frequency, since this value is now being returned by dvb_pll_configure(). Signed-off-by:
-
Michael Krufky authored
This patch removes some duplicated code by returning the frequency set by dvb_pll_configure(), instead of recalculating it again in dvb_pll_set_params() and dvb_pll_calc_regs(). If the return value of dvb_pll_configure is less than zero, it is an error code. Otherwise, the return value is the frequency actually set by the function. Signed-off-by:
-
Michael Krufky authored
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by:
-
Patrick Boettcher authored
Adding support for Pinnacle PCTV 400e DVB-S. The module name is called ttusb2, because it this device (and other Pinnacle devices) is using the USB-protocol originally used by Technotrend device. I'm suspecting Technotrend as the device-designer. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Added a dump I2C message to the TDA826x-driver to fix I2C read for identification with ttusb2-driver. Signed-off-by:
-
audetto@tiscali.it authored
Signed-off-by:
Andrea A Odetti <audetto@tiscali.it> Signed-off-by:
-
Mauro Carvalho Chehab authored
video_ioctl2 will auto-generate standard entries at ENUM_FMT. Also, now, a driver may return a subset of the video array at the return, to be stored as the current_norm. For example, a driver may ask for V4L2_STD_PAL. At return, driver may change it to V4L2_STD_PAL_B. This way, a futher call to G_STD will return the exact detected video std. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Andrew de Quincey authored
For some reason, some of these cards have the tda10021 configured to a different address. This adds support for such cards Signed-off-by:
-
Dmitry Torokhov authored
Also sprinkled some input_sync() throughout the code. Acked-by:
Ricardo Cerqueira <v4l@cerqueira.org> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Mike Isely authored
Fix long-standing issue which prevented use of 24xxx devices at any horizontal resolution other an 720. The problem is in the cx25840 module, if no attempt is made to initialize VBI there. Such a thing should not be needed, but the pvrusb2 driver is updated now to deal with this. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Michael Krufky authored
fix build error: lgh06xf.h:29: error: syntax error before '{' token Signed-off-by: -
Michael Krufky authored
We don't have to check for NULL before kfree() Acked-by:
-
Michael Krufky authored
This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners, called lgh06xf. The purpose of this change is to reduce some duplicated code, and to allow the lgh06xf tuner code to take advantage of dvb_attach(). As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed, since the lgh06xf module itself will use dvb-pll, while remaining optional for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE Acked-by:
-
Jonathan Corbet authored
A couple of Cafe driver fixes, and support for the hue and saturation controls. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Jelle Foks authored
Add subvendor/device of the ADSTech Instant TV Deluxe PTV-305 to the card list as card=45 (KWORLD_HARDWARE_MPEG_TV_XPERT). Signed-off-by:
Jelle Foks <jelle@foks.8m.com> Signed-off-by:
-
Jelle Foks authored
Allows 'debug=1' for cx88-blackbird module (dev needs to be valid for dprintk). Fixes a null-pointer dereference when using debug=1. Signed-off-by:
-
Nico Sabbi authored
This card (like some others) supports both, DVB-T and a DVB-S. The patch adds an insmod option to select the frontend: use_frontend=0 -> DVB-T use_frontend=1 -> DVB-S Signed-off-by:
Nico Sabbi <nsabbi@tiscali.it> Signed-off-by:
-
